scholarly journals Preparation and Physicochemical Properties of Blend Films of Feather Keratin and Poly(vinyl alcohol) Compatibilized by Tris(hydroxymethyl)aminomethane

Polymers ◽  
2018 ◽  
Vol 10 (10) ◽  
pp. 1054 ◽  
Author(s):  
Xunjun Chen ◽  
Shufang Wu ◽  
Minghao Yi ◽  
Jianfang Ge ◽  
Guoqiang Yin ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Vinyl Alcohol ◽  
System Analysis ◽  
Barrier Properties ◽  
Contact Angles ◽  
Poly Vinyl Alcohol ◽  
Oxygen Barrier ◽  
Elongation At Break ◽  
Blend Films ◽  
Feather Keratin

Blend films of feather keratin (FK) and synthetic poly(vinyl alcohol) (PVA) that were compatibilized by tris(hydroxymethyl)aminomethane (Tris) were successfully prepared by a solution-casting method. The scanning electron microscopy (SEM) results showed that a phase separation occurred in the FK/PVA/Tris blended system. Analysis by Fourier transform infrared spectroscopy indicated that the main interactions between the three components were hydrogen bonds. In addition, X-ray diffraction analysis showed that the FK/PVA/Tris blend films were partially crystalline. The barrier properties, mechanical properties, and contact angles of the FK/PVA/Tris films were investigated to determine the effects of the PVA and Tris concentrations. More specifically, upon increasing the PVA content, the elongation at break, the hydrophilicity, and the oxygen barrier properties were enhanced. However, at a constant PVA content, an increase in the Tris content caused the oxygen permeability and the contact angle to decrease, while the tensile strength, elongation at break, and oxygen barrier properties were enhanced. These results indicated that the mechanical properties and gas resistance of the FK/PVA/Tris blend films could be successfully improved using the method described herein, confirming that this route provided a convenient and promising means to prepare FK plastics for practical applications.

Effect of Soya Bean Flour Content on Mechanical Properties and Biodegradability of Poly(vinyl Alcohol) Film

2012 ◽  
Vol 626 ◽  
pp. 360-365
Author(s):  
Fairus Mazlia Mat Suki ◽  
Hanafi Ismail ◽  
Zuratul Ain Abdul Hamid
Keyword(s):  
Mechanical Properties ◽  
Vinyl Alcohol ◽  
Tensile Modulus ◽  
Soya Bean ◽  
Poly Vinyl Alcohol ◽  
Biodegradable Film ◽  
Elongation At Break ◽  
Blend Films ◽  
Bean Flour ◽  
Positive Effect

Biodegradable film blends of soya bean flour with poly (vinyl alcohol) (PVA) were prepared by solution mixing and solution casting. The main goal of this study is to investigate the effect of soya bean flour content in the PVA film. Mechanical properties of the obtained blends were assessed by tensile testing, whereas the biodegradability were assessed by subjected the films in natural weathering. The incorporation of soya bean flour decreased the tensile strength and elongation at break of PVA film. However, the tensile modulus increased with the addition of soya bean flour. The reduction in tensile properties of the PVA/soya bean flour blend films revealed that the presence of soya bean flour show positive effect in degradation.

Preparation and Properties of Biocomposite Film with Gelatin and Poly(Vinyl Alcohol)

2011 ◽  
Vol 287-290 ◽  
pp. 302-305
Author(s):  
Xi Ping Gao ◽  
Ke Yong Tang ◽  
Yu Qing Zhang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Optical Properties ◽  
Vinyl Alcohol ◽  
Composite Films ◽  
Poly Vinyl Alcohol ◽  
Elongation At Break ◽  
Biocomposite Film

The mechanical properties, swelling, solubility, and optical properties of composite films with poly(vinyl alcohol) (PVA) and gelatin were studied. With increasing the PVA content in the composite films, the tensile strength (TS) and elongation at break (EB) of the films increase. The swelling and solubility are different with different gelatin/PVA ratios, with the lowest at 1:5.

Structure and Mechanical Properties of Chitosan/Poly(Vinyl Alcohol) Blend Films

2007 ◽  
Vol 258 (1) ◽  
pp. 63-81 ◽  
Author(s):  
Yumiko Nakano ◽  
Yuezhen Bin ◽  
Mami Bando ◽  
Teruo Nakashima ◽  
Tsumuko Okuno ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Vinyl Alcohol ◽  
Poly Vinyl Alcohol ◽  
Blend Films

scholarly journals FTIR spectroscopy characterization and critical comparison of poly(vinyl)alcohol and natural hydroxyapatite derived from fish bone composite for bone-scaffold

2021 ◽  
Vol 2120 (1) ◽  
pp. 012004
Author(s):  
May Teng Hooi ◽  
Siew Wei Phang ◽  
Hui Ying Yow ◽  
Edmund David ◽  
Ning Xin Kim ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Vinyl Alcohol ◽  
Fish Bone ◽  
Poly Vinyl Alcohol ◽  
Solution Casting ◽  
Casting Method ◽  
Elongation At Break ◽  
Solution Casting Method ◽  
Extrusion Method

Abstract This paper presents the interaction comparison of poly(vinyl) alcohol (PVA) with hydroxyapatite derived from Spanish Mackerel (SM) and Whitefin Wolf Herring (WWH) bones, in different processing method. PVA filament and solution casting method illustrated higher crystallinity in the FTIR graph as compared to the PVA pellet and filament extrusion method. Besides, minimal interactions between PVA with glycerol and HAp was observed as well. PVA pellet and solution casting method portrait higher interaction as compared to the PVA filament and extrusion method. As for the HAp of SM and WWH, WWH had higher crystallinity and better cell adhesion with a higher Ca/P ratio while SM had relatively better mechanical strength with Ca/P ratio near to stoichiometric value. The loading of HAp (0, 2.5, 5, 10, 20, 30%) does not affect interactions of PVA/HAp composite in FTIR, and thermal properties in TGA. However, it caused an increase in crystallinity at low HAp loading and decreased at higher loading of HAp above 10%. Upon addition of HAp, tensile strength increased and elongation at break decreased. As the loading of HAp increased, both mechanical properties decreased. Scaffold with WWH composite possessed lower tensile strength and higher elongation at break than SM composite. The result of mechanical properties corresponded to the SEM result. ANOVA analysis justified the effect of HAp variations and loading on the mechanical properties of the composite was prominent.

scholarly journals Design of Novel PLA/OMMT Films with Improved Gas Barrier and Mechanical Properties by Intercalating OMMT Interlayer with High Gas Barrier Polymers

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3962
Author(s):  
Abdul Shakoor Shar ◽  
Caili Zhang ◽  
Xieqing Song ◽  
Yunxuan Weng ◽  
Qiuyue Du
Keyword(s):  
Mechanical Properties ◽  
Vinyl Alcohol ◽  
Composite Films ◽  
Barrier Properties ◽  
Poly Vinyl Alcohol ◽  
Diffraction Measurement ◽  
Scanning Calorimetry ◽  
Gas Barrier ◽  
Ethylene Vinyl Alcohol ◽  
Barrier Polymers

Polymer/clay composites are an innovative class of materials. In this study, we present a facile method for the preparation of biodegradable and robust PLA/organomodified montmorillonite (OMMT) composite films with excellent gas barrier performance. When the design of PLA/OMMT composite films, in addition to making OMMT have good intercalation effect in the matrix, the compatibility of intercalating polymer and matrix should also be considered. In this work, two polymers with high gas barrier properties, namely poly(vinyl alcohol) (PVA) and ethylene vinyl alcohol copolymer (EVOH), were selected to intercalate OMMT. The morphology and microstructures of the prepared PLA/PVA/OMMT and PLA/EVOH/OMMT composites were characterized by the X-ray diffraction measurement, scanning electron microscopy, and differential scanning calorimetry. It was shown that the good dispersibility of PVA in the PLA matrix, rather than the intercalation effect, was responsible for the improved gas barrier and mechanical properties of PLA/PVA/OMMT composite. The elongation at break increases from 4.5% to 22.7% when 1 wt % PVA is added to PLA/OMMT. Moreover, gas barrier of PLA/PVA1/OMMT measured as O2 permeability is 52.8% higher than that of neat PLA. This work provides a route to intercalate OMMT interlayer with high gas barrier polymers and thus can be a useful reference to fabricate PLA/OMMT composites with improved gas barrier and mechanical properties. A comparison of oxygen permeabilities with existing commercial packaging films indicates that the biodegradable PLA/PVA/OMMT may serve as a viable substitute for packaging film applications.

Preparation and Characterization of Chitosan/poly( Vinyl Alcohol) Composite Packaging Films

2011 ◽  
Vol 332-334 ◽  
pp. 1739-1742 ◽  
Author(s):  
Ling Li ◽  
Zheng Wei Jin ◽  
Jian Qing Wang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Water Vapor ◽  
Vinyl Alcohol ◽  
Permeability Coefficient ◽  
Composite Films ◽  
Weight Ratio ◽  
Poly Vinyl Alcohol ◽  
Elongation At Break ◽  
Packaging Films

A novel chitosan/poly(vinyl alcohol) composite packaging films were prepared by the casting method, and the effects of chitosan concentration on the structures, mechanical properties, permeability for oxygen and water vapor were discussed in this study. Mechanical properties of these films, which were evaluated by the tensile test and the barrier properties showed that the elongation at break (E) of the composite films decreased rapidly with the addition of chitosan, whereas, the tensile strength (TS) presented an almost opposite trend. Both the water vapour and oxygen transmission rate values were increased with the increasing amount of the chitosan in the composite films. Based on the obtained results, the better property of the composites films would be prepared chitosan/poly(vinyl alcohol) blends at a weight ratio of 3/5, and the tensile strength and elongation at break of the packaging films were 34.12 MPa, 40.24 % respectively. It was also observed that the water vapor permeability coefficient (Pv) and the oxygen permeability coefficient (P) of chitosan/poly(vinyl alcohol) composite packaging films prepared with weight ratio of 3/5 were 1.99×10-15 g•cm/cm2•s•Pa and 7.98×10-16 cm3•cm/cm2•s•Pa respectively. The composite films in this paper can be used in fresh-keeping or other fields as a kind of green packaging material.

Sign in / Sign up

Export Citation Format

Share Document