scholarly journals Lignin Structure and Solvent Effects on the Selective Removal of Condensed Units and Enrichment of S-Type Lignin

Polymers ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 967 ◽  
Author(s):  
Si Gao ◽  
Ji Zhao ◽  
Xing Wang ◽  
Yanzhu Guo ◽  
Ying Han ◽  
...  
Keyword(s):  
Chemical Structure ◽  
Sugar Content ◽  
Gel Permeation Chromatography ◽  
Acidic Water ◽  
Molecular Weights ◽  
Structural Differences ◽  
Acetic Acid Water ◽  
Condensed Structure ◽  
Degradation Properties ◽  
G Ratio

This study focused on the structural differences of lignin after pyridine–acetic acid–water (PAW) and dioxane–acidic water (DAW) purification processes. These structural differences included the S/G ratio, condensed structure, weight-average (MW) molecular weights, β-O-4 linkages and sugar content. The chemical structure of the isolated crude lignin (CL), PAW purified lignin (PPL) and DAW purified lignin (DPL) was elucidated using quantitative 13C NMR, 2D-HSQC NMR spectra, thermogravimetric analysis (TGA), gel permeation chromatography (GPC) and Fourier transform infrared spectroscopy (FTIR). The results showed that the PPL fractions contain fewer condensed structures, higher S/G ratios, more β-O-4 linkages, higher average MW and lower thermal degradation properties compared to the CL and DPL fractions. Furthermore, the PAW process was more selective in removing condensed units and enriching S-type lignin from CL compared to the DAW process. These results provide valuable information for understanding which purification process is more suitable to be applied for lignin.

scholarly journals Green TPUs from Prepolymer Mixtures Designed by Controlling the Chemical Structure of Flexible Segments

2021 ◽  
Vol 22 (14) ◽  
pp. 7438
Author(s):  
Paulina Kasprzyk ◽  
Ewa Głowińska ◽  
Paulina Parcheta-Szwindowska ◽  
Kamila Rohde ◽  
Janusz Datta
Keyword(s):  
Chemical Structure ◽  
Melt Flow Index ◽  
Molar Ratio ◽  
Flow Index ◽  
Step Method ◽  
Elongation At Break ◽  
Molecular Weights ◽  
Trimethylene Glycol ◽  
Hard Segments ◽  
A Chain

This study concerns green thermoplastic polyurethanes (TPU) obtained by controlling the chemical structure of flexible segments. Two types of bio-based polyether polyols—poly(trimethylene glycol)s—with average molecular weights ca. 1000 and 2700 Da were used (PO3G1000 and PO3G2700, respectively). TPUs were prepared via a two-step method. Hard segments consisted of 4,4′-diphenylmethane diisocyanates and the bio-based 1,4-butanodiol (used as a chain extender and used to control the [NCO]/[OH] molar ratio). The impacts of the structure of flexible segments, the amount of each type of prepolymer, and the [NCO]/[OH] molar ratio on the chemical structure and selected properties of the TPUs were verified. By regulating the number of flexible segments of a given type, different selected properties of TPU materials were obtained. Thermal analysis confirmed the high thermal stability of the prepared materials and revealed that TPUs based on a higher amount of prepolymer synthesized from PO3G2700 have a tendency for cold crystallization. An increase in the amount of PO3G1000 at the flexible segments caused an increase in the tensile strength and decrease in the elongation at break. Melt flow index results demonstrated that the increase in the amount of prepolymer based on PO3G1000 resulted in TPUs favorable in terms of machining.

scholarly journals Synthesis and In Vitro Antimicrobial Evaluation of Photoactive Multi—Block Chalcone Conjugate Phthalimide and 1,8-Naphthalimide Novolacs

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1859
Author(s):  
Periyan Durairaju ◽  
Chinnasamy Umarani ◽  
Govindasami Periyasami ◽  
Perumberkandigai Adikesavan Vivekanand ◽  
Mostafizur Rahaman
Keyword(s):  
Spectroscopic Analysis ◽  
Photophysical Properties ◽  
Gel Permeation Chromatography ◽  
13C Nmr Spectroscopy ◽  
Antimicrobial Activities ◽  
Microbial Activities ◽  
E Coli ◽  
Molecular Weights ◽  
Antimicrobial Evaluation

Herein we report new multiblock chalcone conjugate phthalimide and naphthalimide functionalized copolymers with a topologically novel architecture synthesis using nucleophilic substitution and polycondensation methodology. The structures of the synthesized novolacs were elucidated on the basis of their spectroscopic analysis including FTIR, 1H NMR, and 13C NMR spectroscopy. Further, the number-average and weight-average molecular weights of the novolac polymers were determined by gel permeation chromatography (GPC). We examined the solubility of the synthesized polymers in various organic solvents including CHCl3, CH3CN, THF, H2O, CH3OH, DMSO, and DMF and found they are insoluble in both methanol and water. The novolac polymers were evaluated for their photophysical properties and microbial activities. The investigation of the antimicrobial activities of these polymers reveals significant antimicrobial activity against the pathogens E. coli, S. aureus, C. albicans, and A. niger.

Probing the molecular weights of sweetgum and pine kraft lignin fractions

TAPPI Journal ◽  
2021 ◽  
Vol 20 (6) ◽  
pp. 381-391
Author(s):  
JULIANA M. JARDIM ◽  
PETER W. HART ◽  
LUCIAN LUCIA ◽  
HASAN JAMEEL
Keyword(s):  
Molecular Weight ◽  
Black Liquor ◽  
Average Molecular Weight ◽  
Gel Permeation Chromatography ◽  
Systematic Investigation ◽  
Kraft Pulping ◽  
Molecular Weights ◽  
Lignin Recovery ◽  
Lignin Reactivity ◽  
Kinetics Of

The present investigation undertook a systematic investigation of the molecular weight (MW) of kraft lignins throughout the pulping process to establish a correlation between MW and lignin recovery at different extents of the kraft pulping process. The evaluation of MW is crucial for lignin characterization and utilization, since it is known to influence the kinetics of lignin reactivity and its resultant physicochemical properties. Sweetgum and pine lignins precipitated from black liquor at different pHs (9.5 and 2.5) and different extents of kraft pulping (30–150 min) were the subject of this effort. Gel permeation chromatography (GPC) was used to deter- mine the number average molecular weight (Mn), mass average molecular weight (Mw), and polydispersity of the lignin samples. It was shown that the MW of lignins from both feedstocks follow gel degradation theory; that is, at the onset of the kraft pulping process low molecular weightlignins were obtained, and as pulping progressed, the molecular weight peaked and subsequently decreased. An important finding was that acetobromination was shown to be a more effective derivatization technique for carbohydrates containing lignins than acetylation, the technique typically used for derivatization of lignin.

scholarly journals Characterisation of Sequential Solvent Fractionation and Base-catalysed Depolymerisation of Treated Alkali Lignin

BioResources ◽  
2015 ◽  
Vol 10 (3) ◽  
pp. 4137-4151 ◽  
Author(s):  
Aikfei Ang ◽  
Zaidon Ashaari ◽  
Edi Suhaimi Bakar ◽  
Nor Azowa Ibrahim
Keyword(s):  
Molecular Weight ◽  
Chemical Structure ◽  
Average Molecular Weight ◽  
Gel Permeation Chromatography ◽  
Solubility Parameters ◽  
Low Molecular Weight ◽  
Sequential Fractionation ◽  
Weight Average Molecular Weight ◽  
Solvent Fractionation ◽  
Alkali Lignin

An alkali lignin (OL) with a weight-average molecular weight (Mw) of 11646 g/mol was used to prepare low-molecular weight lignin for resin synthesis. The low-molecular weight lignin feedstock was obtained via base-catalysed depolymerisation (BCD) treatments at different combined severity factors. Sequential fractionation of the OL and BCD-treated lignins using organic solvents with different Hildebrand solubility parameters were used to alter the homogeneity of the OL. The yield and properties of OL itself and OL and BCD-treated OL dissolved in propan-1-ol (F1), ethanol (F2), and methanol (F3) were determined. Regardless of the treatment applied, a small amount of OL was dissolved in F1 and F2. The BCD treatment did not increase the yield of F1 but did increase the yields of F2 and F3. Gel permeation chromatography (GPC) showed that the repolymerization reaction occurred in F3 for all BCD-treated OL, so these lignins were not suitable for use as feedstocks for resin production. The GPC, 13Carbon-nuclear magnetic resonance, and Fourier transform infrared spectroscopy analyses confirmed that the F3 in OL exhibited the optimum yield, molecular weight distribution, and chemical structure suitable for use as feedstocks for resin synthesis.

Chemistry of the phytochrome photoconversions

1983 ◽  
Vol 303 (1116) ◽  
pp. 377-386 ◽  
Keyword(s):  
Chemical Structure ◽  
Red Shift ◽  
Structural Differences

The photoconversions of phytochrome, P r ⇌ P fr , occur both in vivo and in vitro . Structural differences between P r and P fr are discussed for chromophore and apoprotein. The chemical structure of the P r chromophore has been established. The P fr chromophore was recently demonstrated to be the 15 E isomer. The red shift of absorption to 730 nm in native P fr is discussed as interaction between chromophore and apoprotein. The nature of this interaction is still unknown. Small changes in the apoprotein surface are of particular interest because they could be part of the signal chain in photoperception.

Study on Synthesis of Cyclotriphosphazene Containing Aminopropylsilicone Functional Group as Flame Retardant

2013 ◽  
Vol 683 ◽  
pp. 25-29 ◽  
Author(s):  
Lan Lan He ◽  
Yi Zhang ◽  
Zhao Lu Qin ◽  
Yan Hua Lan ◽  
Ding Hua Li ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Chemical Structure ◽  
Gel Permeation Chromatography ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Element Analysis ◽  
Fourier Transformed Infrared Spectroscopy ◽  
Industrial Grade ◽  
Distribution Calculation ◽  
Optimum Reaction

A novel non-halogen flame retardant APESP, cyclotriphosphazene containing six aminopropyltriethoxysilicone functional groups N3P3[NH(CH2)3Si(OCH2CH3)3]6, was synthesized by menas of SN2 nucleophilic substitution reaction, using hexachlorocyclotriphosphazene(HCCP) and 3-aminopropyltriethoxy-silane (KH550) as material. Firstly the industrial grade HCCP was purified through recrystallization and sublimation. Then the reaction process was investigated to prompt the yield, and the optimum reaction conditions were as follows: triethylamine as acid-binding agent, tetrahydrofuran as solvent, HCCP/KH550/triethylamine molar ratio 1:7.2:7.2, dripping time: 1 hour, temperature: 67°C and reaction time: 20h. Maximum APESP yield reached 94.3%. The chemical structure and purity was characterized by element analysis, Fourier-transformed infrared spectroscopy (FTIR), mass spectrum, gel permeation chromatography (GPC) and nuclear magnetic resonance (NMR) analysis. The results showed that the structure of synthesized product is consistent with the theoretical structure, in which the chlorine atoms were completely substituted. The charge distribution calculation of HCCP and KH550 confirmed the reaction mechanism.

Synthesis and characterization of novel methacrylate copolymers having pendant piperonyl group: monomer reactivity ratio, thermal degradation kinetics, and biological activity

2021 ◽  
Vol 29 (9_suppl) ◽  
pp. S1432-S1445
Author(s):  
Ibrahim Erol ◽  
Bayram Gencer ◽  
Zeki Gurler
Keyword(s):  
Biological Activity ◽  
Degradation Kinetics ◽  
Gel Permeation Chromatography ◽  
Reactivity Ratio ◽  
Thermal Degradation Kinetics ◽  
Scanning Calorimetry ◽  
Molecular Weights ◽  
Monomer Reactivity Ratio ◽  
Bacteria And Fungi ◽  
Photo Stability

In this study, 2-{[(2H-1,3-benzodioxol-5-yl)methyl]amino}-2-oxoethyl 2-methylprop-2-enoate (BMAOME) monomer was synthesized, and copolymers were prepared with glycidyl methacrylate (GMA). Structural characterizations of the compounds were performed using FTIR, 1H-, and 13C-NMR techniques. Monomer reactivity ratio values were calculated by Finemann–Ross (FR) and Kelen–Tudos (KT) methods. The Tg value of the polymers was determined by differential scanning calorimetry (DSC) and their thermal stability was determined by thermogravimetric analysis (TGA). The molecular weights (w and n) and polydispersity index of the polymers were determined by gel permeation chromatography. The Ea value of thermal decomposition was determined by using the Ozawa and Kissinger methods. The photo-stability of the copolymers was investigated. Furthermore, the photo-stability of the copolymers and the biological activity of polymers against different types of bacteria and fungi were investigated.

scholarly journals Expression and Characterization of an Alginate Lyase and Its Thermostable Mutant in Pichia pastoris

Marine Drugs ◽  
2020 ◽  
Vol 18 (6) ◽  
pp. 305
Author(s):  
Suxiao Yang ◽  
Zhemin Liu ◽  
Xiaodan Fu ◽  
Changliang Zhu ◽  
Qing Kong ◽  
...  
Keyword(s):  
Pichia Pastoris ◽  
Degradation Products ◽  
Alginate Lyase ◽  
Maximal Activity ◽  
Degree Of Polymerization ◽  
Molecular Weights ◽  
Industrial Preparation ◽  
Alginate Oligosaccharides ◽  
Elimination Mechanism ◽  
G Ratio

Alginate is one of the most abundant polysaccharides in algae. Alginate lyase degrades alginate through a β-elimination mechanism to produce alginate oligosaccharides with special bioactivities. Improving enzyme activity and thermal stability can promote the application of alginate lyase in the industrial preparation of alginate oligosaccharides. In this study, the recombinant alginate lyase cAlyM and its thermostable mutant 102C300C were expressed and characterized in Pichia pastoris. The specific activities of cAlyM and 102C300C were 277.1 U/mg and 249.6 U/mg, respectively. Both enzymes showed maximal activity at 50 °C and pH 8.0 and polyG preference. The half-life values of 102C300C at 45 °C and 50 °C were 2.6 times and 11.7 times the values of cAlyM, respectively. The degradation products of 102C300C with a lower degree of polymerization contained more guluronate. The oligosaccharides with a polymerization degree of 2–4 were the final hydrolytic products. Therefore, 102C300C is potentially valuable in the production of alginate oligosaccharides with specific M/G ratio and molecular weights.

Sign in / Sign up

Export Citation Format

Share Document