scholarly journals Effects of Grafting on Morphophysiological and Yield Characteristic of Eggplant (Solanum melongena L.) Grafted onto Wild Relative Rootstocks

Plants ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1583
Author(s):  
Ibrahim Musa ◽  
Mohd Y. Rafii ◽  
Khairulmazmi Ahmad ◽  
Shairul Izan Ramlee ◽  
Muhammad Asyraf Md Hatta ◽  
...  
Keyword(s):  
Solanum Melongena ◽  
Fruit Weight ◽  
Fruit Yield ◽  
High Rate ◽  
Growth And Yield ◽  
Vegetable Production ◽  
Wild Relative ◽  
Marketable Yield ◽  
Marketable Fruit ◽  
Graft Success

Grafting is regarded as an integral component of sustainable vegetable production. It is important in the management of soil-borne diseases, and reports suggest that grafting with viable rootstocks can enhance crop growth and yield. This research was conducted using splices and cleft grafting techniques to investigate graft compatibility among varieties of high yielding eggplant scion (MCV1, MCV2, CCV1, CCV2, CCV3, NCV, and TCV) grafted onto wild rootstocks (MWR, BWR, and TWR) to study their morphophysiological and yield characteristics. High yielding scions grafted onto wild relative rootstocks were compared with two controls including self-grafted and non-grafted. All the scion had a high rate of germination (≥95%) and remarkable graft success (100%) was recorded in MCV1, MCV2, and TCV using the cleft techniques. Generally, the use of rootstocks resulted in higher total and marketable fruit yield compared to the non-grafted and self-grafted scion plants, respectively. In particular, MWR and TWR rootstock conferred the highest vigour to the scion, resulting in the highest values recorded for total and marketable fruit yield, number of fruits per plant and average fruit weight. A similar result was obtained in fruit length and diameter, where long and wide fruits were observed in scions grafted onto MWR and TWR rootstocks, respectively. Grafting of high yielding eggplant scion onto resistant MWR, BWR and TWR eggplant rootstock was found to be beneficial for eggplant cultivation. The remarkable compatibility and vigour of the rootstock with scion led to the improvement in total and marketable yield of the fruits. As such, it can be concluded that the use of wild relative rootstocks of eggplant species can be a valuable method of improving eggplant production.

scholarly journals DENSELY PLANTED OKRA FOR DESTRUCTIVE HARVEST

HortScience ◽  
1995 ◽  
Vol 30 (3) ◽  
pp. 438a-438
Author(s):  
Yaying Wu ◽  
Brian A. Kahn ◽  
John B. Solie
Keyword(s):  
Plant Density ◽  
Fruit Weight ◽  
High Density ◽  
Fruit Yield ◽  
Abelmoschus Esculentus ◽  
Mature Fruit ◽  
Marketable Yield ◽  
Harvest Timing ◽  
Plant Arrangement ◽  
Marketable Fruit

We are developing a mechanical harvest system for okra [Abelmoschus esculentus (L.) Moench]. Our objective was to identify a high-density (HD) plant arrangement and a harvest timing that would maximize marketable fruit yield per hectare with a destructive harvest. We compared destructively harvested plants grown at spacings of (in cm) 15 × 15, 23 × 23, and 30 × 30 with hand-harvested plants grown at 90 × 23 cm. Within HD treatments, marketable fruit weight increased inconsistently as plant density increased. The 30 × 30-cm spacing was not dense enough. Branching decreased and the position of the first marketable fruit attachment moved up as plant density increased. Delaying destructive harvest until many over-mature fruit were present often did not increase marketable fruit yield and always reduced the proportion of total harvested fruit weight due to marketable fruit. Overall, percentages of marketable yield obtained by destructive harvests of HD plants were low compared to the cumulative marketable yield from control plants. However, the labor-saving potential was high. A prototype machine for harvest of HD okra has been developed, and further testing is planned.

scholarly journals Effects of salicylic and benzoic acid on yield and yield components of moisture stressed tomato (solanum lycopersicun l.) at Kadawa Sudan Savannah

2021 ◽  
Vol 14 (1) ◽  
pp. 142-151
Author(s):  
H.M. Isa ◽  
A.A. Manga
Keyword(s):  
Salicylic Acid ◽  
Moisture Stress ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Benzoic Acids ◽  
Plot Size ◽  
Fruit Setting ◽  
Marketable Fruit ◽  
Fruit Diameter

Salicylic acid and Benzoic acids are antitranpirants usually used to reduce the rate of moisture loss and increase productivity of irrigated crops. To test antitranspiracy of Salicylic and Benzoic acids, field experiments were conducted during the two successive dry Seasons of 2011/2012 and 2012/2013 at the Agricultural Research Station Farm, Kadawa (11̊ 38ʹ 40.3ʺ N,8̊ 25ʹ3.9ʺ E) 498m elevation above sea level. The aim was to study the effects of antitranspirants and moisture stress on crop growth and development stages of tomato. The treatments consisted of two antitranspirants at four different concentrations of 0, 200, 400 and 600 ppm, and three moisture stress stages, vegetative, flowering and fruit setting. Antitranspirants and moisture stresses were assigned to the main plot and concentrations were used as sub–plot treatment. These were replicated three times and laid out in a split-plot design. The gross plot size was 3.6m x 3.0m (10.8m2) consisting of 6 rows of 3m length, while the net plot size was 1.2m 1.8m (2.16 m2) consisting of 2 inner most rows. Data were taken on tomato growth and yield attributes. Data generated were analysed using statistical analytics software (SAS). The results of the study revealed that application of both Antitranspirants enhanced growth and yield components such as fruit diameter, number of fruits plant1, average fruit weight, marketable fruit yield and total fruit yield of tomato. Significant interactions between and among the factors were also recorded for fruit diameter, number of fruits plant-1 marketable fruit yield and the total fruit yield. Application of 200 and 400 ppm of of Salicylic acid at fruit setting produced the highest total fruit yield (6.66 tha-1) which was statistically similar to 600 ppm of Benzoic (6.10 t ha-1) at flowering while the control had the lowest. Total fruit yield was positively and significantly correlated with number of fruit plant-1 and average fruit weight. Number of fruits plant-1 was found to have the highest direct contribution to the yield. Flowering and fruiting stages were found to be the critical growth stages for moisture stress of tomato. Foliar application of 400 ppm of Salicylic acid at fruit setting stage appeared to promote tomato yield in the study area.

scholarly journals Growth and yield performance of hybrid tomato (Solanum lycopersicum L.) lines at Parwanipur, Bara, Nepal

2020 ◽  
Vol 3 (1) ◽  
pp. 180-189
Author(s):  
Suraj Gurung ◽  
Prabin Adhikari ◽  
Kushal Giri ◽  
Tek Prasad Gotame ◽  
Surendra Lal Shrestha
Keyword(s):  
Block Design ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Research Station ◽  
Higher Plant ◽  
Yield Performance ◽  
Solanum Lycopersicum L ◽  
Hybrid Variety ◽  
Marketable Fruit

An experiment was conducted to evaluate the performance of hybrid tomato lines on growth and yield performance at Regional Agriculture research Station (RARS), Parwanipur, Nepal during end of September, 2018 to April, 2019. The experiment was laid out in randomized complete block design (RCBD) with seven hybrid tomato lines as treatments and three replications. The tested lines included Srijana and Dalila as check varieties and other lines, developed by crossing HRA and HRD lines which showed better performance under late blight conditions. HRA 20× HRD 1 showed significantly higher plant height (110.67 cm) which was statistically at par with genotype HRA 14× HRD 7. The highest number of fruits per plant (69) was recorded from Srijana whereas the lowest number of fruits per plant (37) was recorded from cv. HRA20 × HRD1. The fruit yield of the lines ranged from 50.54 t/ha to 32.2 t/ha with Srijana having the highest yield and HRA 20× HRD 1 as the lowest. Similar results were shown regarding the marketable fruit yield. However, the highest individual fruit weight (34.67g) was recorded in HRA 14× HRD 7 and the least fruit weight was recorded in Srijana (24.22 g). Results showed that the maximum TSS (5.53 0Brix) was recorded from Dalila which was similar as Srijana. Hence, the overall performance of Srijana was recorded superior regarding both quantitative and qualitative suggesting Srijana as the recommended variety in the given domain. Here authors concluded that Srijana is still a comparatively better hybrid variety in Nepal. 

scholarly journals Preplant Sulfur Fertilization Rates and Irrigation Programs on Tomato Growth and Yield

2012 ◽  
Vol 22 (4) ◽  
pp. 523-527 ◽  
Author(s):  
Camille E. Esmel ◽  
Bielinski M. Santos ◽  
Eric H. Simonne ◽  
Jack E. Rechcigl ◽  
Joseph W. Noling
Keyword(s):  
Soil Ph ◽  
Irrigation Water ◽  
Production Systems ◽  
Fruit Weight ◽  
Growth And Yield ◽  
Vegetable Production ◽  
Application Range ◽  
Fertilization Rates ◽  
Tomato Yield ◽  
Marketable Fruit

A renewed interest in sulfur (S) deficiency has occurred because of reductions in atmospheric depositions of S caused by implementation of clean air regulations around the world. In vegetable production systems, other sources of S exist, such as soil S, fertilizers, and irrigation water. While soil testing and fertilizer labels impart information on quantity of S, it is unknown how much S within the irrigation water contributes to the total crop requirement. Two studies were conducted to determine the influence of elemental S fertilization rates and irrigation programs on tomato (Solanum lycopersicum) growth and yield. Irrigation volumes were 3528, 5292, and 7056 gal/acre per day and preplant S rates were 0, 25, 50, 100, 150, and 200 lb/acre. Data showed that neither plant height, leaf greenness, soil pH nor total soil S content was consistently affected by preplant S rates. During both seasons, early marketable fruit weight increased sharply when plots were treated with at least 25 lb/acre of preplant S in comparison with the nontreated control. Early fruit weight of extralarge and all marketable grades increased by 1.5 and 1.7 tons/acre, respectively, with the application of 25 lb/acre of S. There were no early fruit weight differences, regardless of marketable fruit grade, among preplant S rates from 25 to 200 lb/acre. Based upon this result, adding preplant S to the fertilization programs in sandy soils improves tomato yield and fall within the current recommended application range of S (30 lb/acre) for vegetables in Florida. At the same time, irrigation volumes did not consistently influence soil S concentration, soil pH, leaf S concentrations or tomato yield, which suggested that irrigation water with levels of S similar to this location [58 mg·L−1 of sulfate (SO4) or 19 mg·L−1 of S] may not meet tomato S requirement during a short cropping seasons of 12 weeks, possibly because microbes need longer periods of time to oxidize the current S species in the water to the absorbed SO4 form.

scholarly journals Densely Planted Okra for Destructive Harvest: I. Effects on Yield

HortScience ◽  
2003 ◽  
Vol 38 (7) ◽  
pp. 1360-1364 ◽  
Author(s):  
Yaying Wu ◽  
Brian A. Kahn ◽  
Niels O. Maness ◽  
John B. Solie ◽  
Richard W. Whitney ◽  
...  
Keyword(s):  
Population Density ◽  
Fruit Set ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Yield Potential ◽  
Limiting Factor ◽  
Marketable Yield ◽  
Plant Populations ◽  
Harvest Timing ◽  
Marketable Fruit

Okra [Abelmoschus esculentus (L.) Moench] was grown at various highly dense (HD) plant populations for destructive harvest, and compared with control plants grown at spacings of 90 × 23 cm and harvested repeatedly by hand. Our objectives were to identify a HD plant arrangement and an optimum harvest timing to maximize marketable fruit yield per hectare with a single destructive harvest, and to evaluate the potential for regrowth of cut plants followed by one or more subsequent harvests. Within HD treatments, marketable fruit weight per hectare tended to increase as the plant population density increased. Spacings of 30 × 30 cm and wider were not dense enough for the destructive harvest system due to a low marketable yield potential. Wide spacings did favor regrowth of cut plants in two experiments, but total marketable yields were still highest with the highest plant populations tested. Delaying destructive harvest until many overmature fruit were present did not consistently affect marketable fruit yield, but always decreased the proportion (by weight) of marketable fruit to total harvested fruit. Overall, percentages of marketable yield obtained by destructive harvests of plots with HD plant populations were low relative to the cumulative marketable yield from control plots. The lack of concentrated fruit set in okra remains a limiting factor for destructive harvest. However, the labor-saving potential of this system should stimulate further research.

Characterization of Genetic Resources and Identification of Selection Indices of Brinjal (Solanum melongena L.) Grown in Eastern India

2011 ◽  
Vol 74 (1) ◽  
pp. 39-49 ◽  
Author(s):  
Arup Chattopadhyay ◽  
Subrata Dutta ◽  
Pranab Hazra
Keyword(s):  
Genetic Resources ◽  
Solanum Melongena ◽  
Fruit Weight ◽  
Yield Component ◽  
Fruit Yield ◽  
Eastern India ◽  
Selection Indices ◽  
Marketable Fruit ◽  
Positive Direct

Characterization of Genetic Resources and Identification of Selection Indices of Brinjal (Solanum melongenaL.) Grown in Eastern IndiaThirty five diverse genotypes of brinjal collected from different parts of Eastern India were characterized as per the documented descriptors and were evaluated for their morphological and yield component characters during autumn-winter season. All the brinjal genotypes under study showed highly significant variations among twelve quantitative traits. However, a wide range of days to 50% of flowering (47-79), fruit length (8.70 -23.90 cm), fruit girth (2.67-10.30 cm), fruit weight (52.33-319.37 g), number of marketable fruit per plant (4.33-12.00) and marketable fruit yield per plant (0.39-1.68 kg) among the genotypes was observed. Three characters namely, fruit weight, plant height and days to 50% of flowering exhibited high heritability and genetic advance indicating that such situation may arise due to the action of additive genes controlling the characters. The genotypic and phenotypic correlations agreed closely with each other. Fruit weight and fruit girth exhibited significantly positive correlations with marketable fruit yield per plant. Among the eleven yield component traits, fruit weight and number of marketable fruits per plant showed highly positive direct effect on marketable fruit yield per plant. Attention should be paid on selection based on marketable fruit weight and number of marketable fruits per plant for marketable yield improvement of brinjal.

scholarly journals Effect of synthetic mulches on melon (Cucumis melo L.) yielding

2011 ◽  
Vol 23 (2) ◽  
pp. 151-156
Author(s):  
Edyta Kosterna ◽  
Anna Zaniewicz-Bajkowska ◽  
Jolanta Franczuk ◽  
Robert Rosa ◽  
Krystyna Chromińska ◽  
...  
Keyword(s):  
Cucumis Melo ◽  
Total Yield ◽  
Weather Conditions ◽  
Fruit Weight ◽  
Climatic Conditions ◽  
Fruit Yield ◽  
Marketable Yield ◽  
Synthetic Materials ◽  
Polypropylene Fabric ◽  
Marketable Fruit

Effect of synthetic mulches on melon (Cucumis meloL.) yieldingA field experiment was carried out in 2006-2008. The study examined the effect of soil mulching with synthetic materials (black polyethylene film, black polypropylene nonwoven 50 g m-2, and black polypropylene fabric 94 g m-2) on the fruit yield and quality of two melon cultivars (‘Seledyn’ and ‘Yupi’) grown in the field under the climatic conditions of central-eastern Poland. Specimens grown without mulching served as the control. The climatic conditions during the study years had a significant influence on the level of total, marketable and early yield of melon. The highest melon yield was obtained in 2007, which was characterised by the most favourable weather conditions for melon cultivation. The comparison of the cultivars showed that ‘Seledyn’ was better adapted to the climatic conditions of Poland. From cultivation, this cultivar achieved significantly higher early and total fruit yield compared with ‘Yupi’. ‘Seledyn’ was also characterised by a higher share of early yield of the total yield, a higher number of fruit in the early yield and a higher mean fruit weight. In turn, ‘Yupi’ produced a significantly higher share of marketable yield of the total yield and a higher number of marketable fruit.

scholarly journals Effect of Zinc and Boron on Growth and Yield of Okra (Abelmoschus esculentus L.)

2020 ◽  
pp. 41-47
Author(s):  
Nusrat Jahan ◽  
Md. Ashabul Hoque ◽  
Md. Rasal-Monir ◽  
Sumya Fatima ◽  
Mohammad Nurul Islam ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Area Index ◽  
Spad Value ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Fruit Diameter

The study was carried out to find out the effect of zinc (Zn) and boron (B) on growth and yield of okra (BARI Dherosh 1). The experiment was laid out in Randomized Complete Block Design (RCBD) with three replications. The treatments of the experiment were, T0 (without Zn or B), T1 (20 kg Zn ha-1), T2 (30 kg Zn ha-1), T3 (10 kg B ha-1), T4 (20 kg B ha-1), T5 (20 kg Zn ha-1 + 10 kg B ha-1), T6 (20 kg Zn ha-1 + 20 kg B ha-1), T7 (30 kg Zn ha-1 + 10 kg B ha-1) and T8 (30 kg Zn ha-1 + 20 kg B ha-1) were undertaken to evaluate the best results of the study. The highest plant height was found in T8 (30 kg Zn ha-1 + 20 kg B ha-1) but the highest number of leaves plant-1 was recorded from T7 (30 kg Zn ha-1 + 10 kg B ha-1). On the other hand, the maximum leaf area index, SPAD value, mean fruit weight, fruit length, fruit diameter, fruit dry matter (%), number of fruits plant-1, fresh fruit weight plant-1 , fruit yield plot-1 and fruit yield ha-1 were found in T7 (30 kg Zn ha-1 + 10 kg B ha-1), while the control (T0) showed lowest performance for the respected parameters. It is strongly concluded that 30 kg Zn ha-1 with 10 kg B ha-1 combination may be helpful for okra cultivation in the field level to increase okra production.

scholarly journals Different Compost Materials Used as Source of Organic Matter in Production of Chili Pepper

Akta Agrosia ◽  
2019 ◽  
Vol 22 (1) ◽  
pp. 7-12
Author(s):  
Roy S.O. Sumbayak ◽  
Merakati Handajaningsih ◽  
Hartal Hartal ◽  
Marwanto Marwanto
Keyword(s):  
Organic Matter ◽  
Plant Height ◽  
Growth Yield ◽  
Fruit Weight ◽  
Chili Pepper ◽  
Plant Production ◽  
Growth And Yield ◽  
Cow Dung ◽  
Vegetable Production ◽  
Organic Growth

Compost has been commonly used as the primary organic matter in organic plant production, especially in vegetable production.  Different sources of compost materials give different medium structures and chemical characteristics. The objectives of this research were: 1) to evaluate the response of growth and yield of chili pepper to a rate of compost and source of animal waste which were used as compost; 2) to determine the optimum rate of fertilizer for the highest growth and yield of chili pepper. The research was carried out from November 2015 until March 2016. Compost material treatments consisted of cow dung, empty palm oil bunches, and mixed of vegetable residue and weeds. The compost rate treatments consisted of 0 ton ha-1, 10 ton ha-1, 20 ton ha-1, and 30 ton ha-1. No interaction between the two treatments was found to influence plant growth and yield variables.   The type of compost materials affected plant height of 5, 6, and7 weeks after transplanting.  Cow dung as a source of compost showed the best effect in increasing chili plant height.  Plant height, the number of plant dichotomous, and plant canopy responded linearly  to the increase of the compost rate. The usage of compost at 20 ton ha-1 and 30 ha-1 resulted in higher fruit length, the number of fruit, and fruit weight per plant.   Keywords: chili pepper, compost, organic, growth, yield 

scholarly journals Studies on the Variability and Combining Ability for Improved Growth and Yield of Local Eggplant Genotypes (Solanum melongena L.)

2016 ◽  
Vol 8 (2) ◽  
pp. 226-231 ◽  
Author(s):  
Ndueso Michael AKPAN ◽  
Peter OGBONNA ◽  
Vincent ONYIA ◽  
Emeka OKECHUKWU ◽  
Agatha ATUGWU ◽  
...  
Keyword(s):  
Combining Ability ◽  
Solanum Melongena ◽  
Principal Component ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Days To Flowering ◽  
Genetic Components ◽  
Filial Generation ◽  
Number Of Leaves ◽  
Number Of Branches

Ten genotypes of eggplant (Solanum melongena L.) comprising of four genitors and six hybrids generated using diallel crosses were evaluated to estimate the magnitude of genetic variability,  their general combing ability (GCA) and specific combining ability (SCA) for improved growth and yield of eggplant. The results obtained showed a significant (p ≤ 0.05) difference among the genotypes in all the traits studied.  The highest fruit yield per plant and fruit yield per hectare was obtained in ‘Yalo’ × ‘K3’ combination, with 1.77 kg per plant and 50.50 tonnes per hectare, respectively. The cluster analysis grouped the studied genotypes into three and six clusters for genitors alone and genitors with first filial generation (F1s), respectively. Principal component analysis showed that number of leaves, number of fruits and number of branches per plant contributed more to the total variations observed in the eggplant populations. Significant GCA and SCA effect were obtained for most characters analyzed, indicating the importance of both additive and non-additive genetic components. The genotype ‘Iyoyo’ was the best general combiner in regard to days to flowering and number of fruits per plant. ‘Yalo’ was the best general combiner in fruits’ circumference and diameter, fruit yield per plant and per hectare. The cross ‘Uyo’ × ‘Iyoyo’ was the best specific combiner in days to flowering, whereas ‘K3’ × ‘Iyoyo’ and ‘Yalo’ × ‘K3’ were the best specific combinations in number of fruits, fruit yield per plant and per hectare.

Sign in / Sign up

Export Citation Format

Share Document