scholarly journals Fabrication of Intragastric Floating, Controlled Release 3D Printed Theophylline Tablets Using Hot-Melt Extrusion and Fused Deposition Modeling

Pharmaceutics ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 77 ◽  
Author(s):  
Bhupendra Giri ◽  
Eon Song ◽  
Jaewook Kwon ◽  
Ju-Hyun Lee ◽  
Jun-Bom Park ◽  
...  
Keyword(s):  
Controlled Release ◽  
Drug Release ◽  
Shell Thickness ◽  
Fused Deposition Modeling ◽  
Release Kinetics ◽  
Hot Melt Extrusion ◽  
Fickian Diffusion ◽  
Melt Extrusion ◽  
Fused Deposition ◽  
Hot Melt

This work presents a novel approach for producing gastro-retentive floating tablets (GRFT) by coupling hot-melt extrusion (HME) and fused deposition three-dimensional printing (3DP). Filaments containing theophylline (THEO) within a hydroxypropyl cellulose (HPC) matrix were prepared using HME. 3DP tablets with different infill percentages and shell thickness were developed and evaluated to determine their drug content, floating behavior, dissolution, and physicochemical properties. The dissolution studies revealed a relationship between the infill percentage/shell thickness and the drug release behavior of the 3DP tablets. All the developed GRFTs possessed the ability to float for 10 h and exhibited zero-order release kinetics. The drug release could be described by the Peppas–Sahlin model, as a combination of Fickian diffusion and swelling mechanism. Drug crystallinity was found unaltered throughout the process. 3DP coupled with HME, could be an effective blueprint to produce controlled-release GRFTs, providing the advantage of simplicity and versatility compared to the conventional methods.

Hot Melt Extrusion and its Application in 3D Printing of Pharmaceuticals

2020 ◽  
Vol 17 ◽  
Author(s):  
Sanjeevani Deshkar ◽  
Mrunali Rathi ◽  
Shital Zambad ◽  
Krishnakant Gandhi
Keyword(s):  
3D Printing ◽  
Dosage Form ◽  
Fused Deposition Modeling ◽  
Hot Melt Extrusion ◽  
Taste Masking ◽  
Melt Extrusion ◽  
Fused Deposition ◽  
Continuous Pharmaceutical Manufacturing ◽  
Solubility Improvement ◽  
Hot Melt

Abstract:: Hot melt extrusion (HME) is a continuous pharmaceutical manufacturing process that has been extensively inves-tigated for solubility improvement and taste masking of active pharmaceutical ingredients. Recently, it is being explored for its application in 3D printing. 3D printing of pharmaceuticals allows flexibility of dosage form design, customization of dosage form for personalized therapy and the possibility of complex designs with the inclusion of multiple actives in a sin-gle unit dosage form. Fused deposition modeling (FDM) is a 3D printing technique with a variety of applications in pharma-ceutical dosage form development. FDM process requires a polymer filament as the starting material that can be obtained by hot melt extrusion. Recent reports suggest enormous applications of a combination of hot melt extrusion and FDM technol-ogy in 3D printing of pharmaceuticals and need to be investigated further. This review in detail describes the HME process along with its application in 3D printing. The review also summarizes the published reports on the application of HME cou-pled with 3D printing technology in drug delivery.

scholarly journals Novel Gastroretentive Floating Pulsatile Drug Delivery System Produced via Hot-Melt Extrusion and Fused Deposition Modeling 3D Printing

Pharmaceutics ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 52 ◽  
Author(s):  
Nagi Reddy Dumpa ◽  
Suresh Bandari ◽  
Michael A. Repka
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Lag Time ◽  
Hot Melt Extrusion ◽  
Melt Extrusion ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Pulsatile Drug Delivery ◽  
Hot Melt

This study was performed to develop novel core-shell gastroretentive floating pulsatile drug delivery systems using a hot-melt extrusion-paired fused deposition modeling (FDM) 3D printing and direct compression method. Hydroxypropyl cellulose (HPC) and ethyl cellulose (EC)-based filaments were fabricated using hot-melt extrusion technology and were utilized as feedstock material for printing shells in FDM 3D printing. The directly compressed theophylline tablet was used as the core. The tablet shell to form pulsatile floating dosage forms with different geometries (shell thickness: 0.8, 1.2, 1.6, and 2.0 mm; wall thickness: 0, 0.8, and 1.6 mm; and % infill density: 50, 75, and 100) were designed, printed, and evaluated. All core-shell tablets floated without any lag time and exhibited good floating behavior throughout the dissolution study. The lag time for the pulsatile release of the drug was 30 min to 6 h. The proportion of ethyl cellulose in the filament composition had a significant (p < 0.05) effect on the lag time. The formulation (2 mm shell thickness, 1.6 mm wall thickness, 100% infill density, 0.5% EC) with the desired lag time of 6 h was selected as an optimized formulation. Thus, FDM 3D printing is a potential technique for the development of complex customized drug delivery systems for personalized pharmacotherapy.

3D printing in personalized drug delivery: An overview of hot-melt extrusion-based fused deposition modeling

2021 ◽  
Vol 600 ◽  
pp. 120501
Author(s):  
Nagireddy Dumpa ◽  
Arun Butreddy ◽  
Honghe Wang ◽  
Neeraja Komanduri ◽  
Suresh Bandari ◽  
...  
Keyword(s):  
Drug Delivery ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Hot Melt Extrusion ◽  
Melt Extrusion ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Hot Melt

scholarly journals Advanced Pharmaceutical Applications of Hot-Melt Extrusion Coupled with Fused Deposition Modelling (FDM) 3D Printing for Personalised Drug Delivery

Pharmaceutics ◽  
2018 ◽  
Vol 10 (4) ◽  
pp. 203 ◽  
Author(s):  
Deck Tan ◽  
Mohammed Maniruzzaman ◽  
Ali Nokhodchi
Keyword(s):  
3D Printing ◽  
Hot Melt Extrusion ◽  
Pharmaceutical Products ◽  
Fused Deposition Modelling ◽  
Melt Extrusion ◽  
3D Object ◽  
3D Printing Technology ◽  
Fused Deposition ◽  
Pharmaceutical Applications ◽  
Hot Melt

Three-dimensional printing, also known as additive manufacturing, is a fabrication process whereby a 3D object is created layer-by-layer by depositing a feedstock material such as thermoplastic polymer. The 3D printing technology has been widely used for rapid prototyping and its interest as a fabrication method has grown significantly across many disciplines. The most common 3D printing technology is called the Fused Deposition Modelling (FDM) which utilises thermoplastic filaments as a starting material, then extrudes the material in sequential layers above its melting temperature to create a 3D object. These filaments can be fabricated using the Hot-Melt Extrusion (HME) technology. The advantage of using HME to manufacture polymer filaments for FDM printing is that a homogenous solid dispersion of two or more pharmaceutical excipients i.e., polymers can be made and a thermostable drug can even be introduced in the filament composition, which is otherwise impractical with any other techniques. By introducing HME techniques for 3D printing filament development can improve the bioavailability and solubility of drugs as well as sustain the drug release for a prolonged period of time. The latter is of particular interest when medical implants are considered via 3D printing. In recent years, there has been increasing interest in implementing a continuous manufacturing method on pharmaceutical products development and manufacture, in order to ensure high quality and efficacy with less batch-to-batch variations of the pharmaceutical products. The HME and FDM technology can be combined into one integrated continuous processing platform. This article reviews the working principle of Hot Melt Extrusion and Fused Deposition Modelling, and how these two technologies can be combined for the use of advanced pharmaceutical applications.

Sign in / Sign up

Export Citation Format

Share Document