scholarly journals Ionic Liquid Forms of the Antimalarial Lumefantrine in Combination with LFCS Type IIIB Lipid-Based Formulations Preferentially Increase Lipid Solubility, In Vitro Solubilization Behavior and In Vivo Exposure

Pharmaceutics ◽  
2019 ◽  
Vol 12 (1) ◽  
pp. 17 ◽  
Author(s):  
Erin Tay ◽  
Tri-Hung Nguyen ◽  
Leigh Ford ◽  
Hywel D. Williams ◽  
Hassan Benameur ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Drug Loading ◽  
Systemic Exposure ◽  
Water Soluble ◽  
Lipid Solubility ◽  
Drug Solubility ◽  
Free Base ◽  
Type Iiib

Lipid based formulations (LBFs) are commonly employed to enhance the absorption of highly lipophilic, poorly water-soluble drugs. However, the utility of LBFs can be limited by low drug solubility in the formulation. Isolation of ionizable drugs as low melting, lipophilic salts or ionic liquids (ILs) provides one means to enhance drug solubility in LBFs. However, whether different ILs benefit from formulation in different LBFs is largely unknown. In the current studies, lumefantrine was isolated as a number of different lipophilic salt/ionic liquid forms and performance was assessed after formulation in a range of LBFs. The solubility of lumefantrine in LBF was enhanced 2- to 80-fold by isolation as the lumefantrine docusate IL when compared to lumefantrine free base. The increase in drug loading subsequently enhanced concentrations in the aqueous phase of model intestinal fluids during in vitro dispersion and digestion testing of the LBF. To assess in vivo performance, the systemic exposure of lumefantrine docusate after administration in Type II-MCF, IIIB-MCF, IIIB-LCF, and IV formulations was evaluated after oral administration to rats. In vivo exposure was compared to control lipid and aqueous suspension formulations of lumefantrine free base. Lumefantrine docusate in the Type IIIB-LCF showed significantly higher plasma exposure compared to all other formulations (up to 35-fold higher). The data suggest that isolation of a lipid-soluble IL, coupled with an appropriate formulation, is a viable means to increase drug dose in an oral formulation and to enhance exposure of lumefantrine in vivo.

scholarly journals Considerable Improvement of Ursolic Acid Water Solubility by Its Encapsulation in Dendrimer Nanoparticles: Design, Synthesis and Physicochemical Characterization

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2196 ◽  
Author(s):  
Silvana Alfei ◽  
Anna Maria Schito ◽  
Guendalina Zuccari
Keyword(s):  
Ursolic Acid ◽  
Water Solubility ◽  
Drug Loading ◽  
Physicochemical Characterization ◽  
Systemic Toxicity ◽  
Water Soluble ◽  
Design Synthesis ◽  
Pentacyclic Triterpenoid

Ursolic acid (UA) is a pentacyclic triterpenoid found in many medicinal plants and aromas endowed with numerous in vitro pharmacological activities, including antibacterial effects. Unfortunately, UA is poorly administered in vivo, due to its water insolubility, low bioavailability, and residual systemic toxicity, thus making urgent the development of water-soluble UA formulations. Dendrimers are nonpareil macromolecules possessing highly controlled size, shape, and architecture. In dendrimers with cationic surface, the contemporary presence of inner cavities and of hydrophilic peripheral functions, allows to encapsulate hydrophobic non-water-soluble drugs as UA, to enhance their water-solubility and stability, and to promote their protracted release, thus decreasing their systemic toxicity. In this paper, aiming at developing a new UA-based antibacterial agent administrable in vivo, we reported the physical entrapment of UA in a biodegradable not cytotoxic cationic dendrimer (G4K). UA-loaded dendrimer nanoparticles (UA-G4K) were obtained, which showed a drug loading (DL%) much higher than those previously reported, a protracted release profile governed by diffusion mechanisms, and no cytotoxicity. Also, UA-G4K was characterized by principal components analysis (PCA)-processed FTIR spectroscopy, by NMR and elemental analyses, and by dynamic light scattering experiments (DLS). The water solubility of UA-G4K was found to be 1868-fold times higher than that of pristine UA, thus making its clinical application feasible.

scholarly journals FORMULATION OF NANOPARTICLES OF TELMISARTAN INCORPORATED IN CARBOXYMETHYLCHITOSAN FOR THE BETTER DRUG DELIVERY AND ENHANCED BIOAVAILABILITY

2017 ◽  
Vol 10 (9) ◽  
pp. 236
Author(s):  
Upasana Yadav ◽  
Angshuman Ray Chowdhuri ◽  
Sumanta Kumar Sahu ◽  
Nuzhat Husain ◽  
Qamar Rehman
Keyword(s):  
Electron Microscopy ◽  
Drug Delivery ◽  
Targeted Delivery ◽  
Drug Loading ◽  
Water Soluble ◽  
Bioavailability Enhancement ◽  
Water Soluble Drug ◽  
Efficient Option

  Objective: In this study, we have made an attempt to the developed formulation of nanoparticles (NPs) of telmisartan (TLM) incorporated in carboxymethyl chitosan (CMCS) for the better drug delivery and enhanced bioavailability.Materials and Methods: The NPs size and morphology were investigated by high-resolution transmission electron microscopy and field emission scanning electron microscopy, respectively. The crystal structures and surface functional groups were analyzed using X-ray diffraction pattern, and Fourier transform infrared spectroscopy, respectively.Results: To increase the solubility of TLM by targeted delivery of the drug through polymeric NPs is an alternative efficient, option for increasing the solubility. TLM nanosuspension powders were successfully formulated for dissolution and bioavailability enhancement of the drug. We focused on evaluating the influence of particle size and crystalline state on the in vitro and in vivo performance of TLM.Conclusion: In summary, we have developed a new approach toward the delivery of poorly water-soluble drug TLM by CMCS NPs. The particles having a good drug loading content and drug encapsulation efficiency. The cytotoxicity of the synthesized NPs is also very less.

scholarly journals ENHANCEMENT OF SOLUBILITY AND BIOAVAILABILITY OF BCS CLASS-II AMBRISENTAN: IN VITRO, IN VIVO AND EX VIVO ANALYSIS

2022 ◽  
pp. 67-74
Author(s):  
RAHUL RADKE ◽  
NEETESH K. JAIN
Keyword(s):  
Solid Dispersion ◽  
Ex Vivo ◽  
Class Ii ◽  
Water Soluble ◽  
Pure Form ◽  
In Vitro Dissolution ◽  
Drug Solubility ◽  
Bcs Class Ii

Objective: The aim of this investigation was to enhance the solubility and bioavailability of the BCS class II poorly water-soluble drug ambrisentan by solid dispersion (SD) techniques using Gelucire 50/13 as a hydrophilic carrier. Methods: Solid dispersion of ambrisentan was prepared by kneading method using different dug: carrier ratios. Prepared SD was characterized for solubility, drug content, percentage yield, in vitro dissolution, ex vivo permeation and bioavailability. Solid-state characterization was performed by differential scanning calorimetry (DSC), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Results: All the SDs formulations showed increase in drug solubility and dissolution when compared with its pure form. Aqueous solubility of the drug was found to be increased 8.23 fold in SD. DSC study showed that endothermic peak of the drug was disappeared in spectra of SD, confirming its amorphous conversion, XRD study revealed the reduction to almost absence of specific high-intensity peaks of drug which confirmed the reduction of crysatallinity of ambrisentan in SD. SEM of optimized SD formulation demonstrates the complete encapsulation and solubilization drug. In vitro dissolution study showed that optimized SD formulation (ASD4) gives the faster drug release of 101.5% in 60 min, as compare to its pure form and other SD formulations. Conclusion: Solid dispersion ASD4 prepared with 1:4 drug to carrier ratio showed the highest drug solubility and in vitro dissolution. The ex vivo and in vivo studies performed on optimized formulation ASD4 showed enhancement in drug permeability and bioavailability in Gelucire 50/13 based SD formulation.

Optimization of Hydroxypropyl Methylcellulose and Dextrin in Development of Dried Nanosuspension for Poorly Water-Soluble Drug

2020 ◽  
Vol 20 (9) ◽  
pp. 5813-5818
Author(s):  
Eun-Ji Heo ◽  
Sang Yeob Park ◽  
Hye-In Kim ◽  
Ji-Hun Sung ◽  
Hyeok Jin Kwon ◽  
...  
Keyword(s):  
Particle Size ◽  
Dissolution Rate ◽  
Oral Absorption ◽  
Drug Loading ◽  
Hydroxypropyl Methylcellulose ◽  
Physical Stability ◽  
Tween 80 ◽  
Water Soluble

The purpose of this study is to identify the effects of a stabilizer and matrix former in the development of a celecoxib dried nanosuspension (DNS) for high dissolution rate and drug loading. Tween 80 and Hydroxypropyl Methylcellulose (HPMC) were used as stabilizers in the bead-milling process and dextrin was used as the matrix former in the spray-drying. Various nanosuspensions (NS) were prepared by varying the ratio of HPMC and dextrin, and the physicochemical properties of each formulation were evaluated for particle size, morphology, drug loading, crystallinity, redispersibility, physical stability and dissolution rate. HPMC efficiently stabilized the NS system and reduced the particle size of NS. The mean particle size of the NS with 0.5% HPMC (w/v) was the smallest (248 nm) of all formulations. Dextrin has been shown to inhibit the increase of particle size efficiently, which is known to occur frequently when NS is being solidified. As the dextrin increased in DNS, the dissolution rates of reconstituted NS were significantly improved. However, it was confirmed that more than the necessary amount of dextrin in DNS reduced the dissolution and drug loading. The dissolution of celecoxib in DNS prepared at the ratio (drug:dextrin, 1:2.5) was almost the highest. The dissolution of optimal formulation was 95.8% at 120 min, which was 2.0-fold higher than that of NS dried without dextrin. In conclusion, these results suggest that the formulation based on Tween 80, HPMC and dextrin may be an effective option for DNS to enhance its in vitro dissolution and in vivo oral absorption.

scholarly journals Supersaturated Lipid-Based Formulations to Enhance the Oral Bioavailability of Venetoclax

Pharmaceutics ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 564 ◽  
Author(s):  
Niklas J. Koehl ◽  
Laura J. Henze ◽  
Martin Kuentz ◽  
René Holm ◽  
Brendan T. Griffin
Keyword(s):  
Drug Loading ◽  
Aqueous Suspension ◽  
Lipid Solubility ◽  
In Vitro Lipolysis ◽  
Drug Candidates ◽  
Clinical Drug Development ◽  
Bioavailability Study ◽  
Capmul Mcm

Increasing numbers of beyond Rule-of-Five drugs are emerging from discovery pipelines, generating a need for bio-enabling formulation approaches, such as lipid-based formulations (LBF), to ensure maximal in vivo exposure. However, many drug candidates display insufficient lipid solubility, leading to dose-loading limitations in LBFs. The aim of this study was to explore the potential of supersaturated LBFs (sLBF) for the beyond Rule-of-Five drug venetoclax. Temperature-induced sLBFs of venetoclax were obtained in olive oil, Captex® 1000, Peceol® and Capmul MCM®, respectively. A Peceol®-based sLBF displayed the highest drug loading and was therefore evaluated further. In vitro lipolysis demonstrated that the Peceol®-based sLBF was able to generate higher venetoclax concentrations in the aqueous phase compared to a Peceol®-based suspension and an aqueous suspension. A subsequent bioavailability study in pigs demonstrated for sLBF a 3.8-fold and 2.1-fold higher bioavailability compared to the drug powder and Peceol®-based suspension, respectively. In conclusion, sLBF is a promising bio-enabling formulation approach to enhance in vivo exposure of beyond Rule-of-Five drugs, such as venetoclax. The in vitro lipolysis results correctly predicted a higher exposure of the sLBF in vivo. The findings of this study are of particular relevance to pre-clinical drug development, where maximum exposure is required.

scholarly journals Amphiphilic Polymeric Micelles Based on Deoxycholic Acid and Folic Acid Modified Chitosan for the Delivery of Paclitaxel

2018 ◽  
Vol 19 (10) ◽  
pp. 3132 ◽  
Author(s):  
Liang Li ◽  
Na Liang ◽  
Danfeng Wang ◽  
Pengfei Yan ◽  
Yoshiaki Kawashima ◽  
...  
Keyword(s):  
Folic Acid ◽  
Deoxycholic Acid ◽  
Polymeric Micelles ◽  
Drug Loading ◽  
Amorphous State ◽  
Spherical Shape ◽  
Water Soluble ◽  
Proton Nuclear Magnetic Resonance

The present investigation aimed to develop a tumor-targeting drug delivery system for paclitaxel (PTX). The hydrophobic deoxycholic acid (DA) and active targeting ligand folic acid (FA) were used to modify water-soluble chitosan (CS). As an amphiphilic polymer, the conjugate FA-CS-DA was synthesized and characterized by Proton nuclear magnetic resonance (1H-NMR) and Fourier-transform infrared spectroscopy (FTIR) analysis. The degree of substitutions of DA and FA were calculated as 15.8% and 8.0%, respectively. In aqueous medium, the conjugate could self-assemble into micelles with the critical micelle concentration of 6.6 × 10−3 mg/mL. Under a transmission electron microscope (TEM), the PTX-loaded micelles exhibited a spherical shape. The particle size determined by dynamic light scattering was 126 nm, and the zeta potential was +19.3 mV. The drug loading efficiency and entrapment efficiency were 9.1% and 81.2%, respectively. X-Ray Diffraction (XRD) analysis showed that the PTX was encapsulated in the micelles in a molecular or amorphous state. In vitro and in vivo antitumor evaluations demonstrated the excellent antitumor activity of PTX-loaded micelles. It was suggested that FA-CS-DA was a safe and effective carrier for the intravenous delivery of paclitaxel.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Chemosensitizing Activity of Histone Deacetylases Inhibitory Cyclic Hydroxamic Acids for Combination Chemotherapy of Lymphatic Leukemia

2018 ◽  
Vol 18 (4) ◽  
pp. 365-371 ◽  
Author(s):  
Denis V. Mishchenko ◽  
Margarita E. Neganova ◽  
Elena N. Klimanova ◽  
Tatyana E. Sashenkova ◽  
Sergey G. Klochkov ◽  
...  
Keyword(s):  
Lipid Peroxidation ◽  
Acute Toxicity ◽  
Histone Deacetylases ◽  
Hydroxamic Acids ◽  
Water Soluble ◽  
Male Rat ◽  
Hybrid Male ◽  
Cyclic Hydroxamic Acids

Background: Anti-tumor effect of hydroxamic acid derivatives is largely connected with its properties as efficient inhibitors of histone deacetylases, and other metalloenzymes involved in carcinogenesis. Objective: The work was aimed to (i) determine the anti-tumor and chemosensitizing activity of the novel racemic spirocyclic hydroxamic acids using experimental drug sensitive leukemia P388 of mice, and (ii) determine the structure-activity relationships as metal chelating and HDAC inhibitory agents. Method: Outbreed male rat of 200-220 g weights were used in biochemical experiments. In vivo experiments were performed using the BDF1 hybrid male mice of 22-24 g weight. Lipid peroxidation, Fe (II) -chelating activity, HDAC fluorescent activity, anti-tumor and anti-metastatic activity, acute toxicity techniques were used in this study. Results: Chemosensitizing properties of water soluble cyclic hydroxamic acids (CHA) are evaluated using in vitro activities and in vivo methods and found significant results. These compounds possess iron (II) chelating properties, and slightly inhibit lipid peroxidation. CHA prepared from triacetonamine (1a-e) are more effective Fe (II) ions cheaters, as compared to CHA prepared from 1- methylpiperidone (2a-e). The histone deacetylase (HDAC) inhibitory activity, lipophilicity and acute toxicity were influenced by the length amino acids (size) (Glycine < Alanine < Valine < Leucine < Phenylalanine). All compounds bearing spiro-N-methylpiperidine ring (2a-e) are non-toxic up to 1250 mg/kg dose, while compounds bearing spiro-tetramethylpiperidine ring (1a-e) exhibit moderate toxicity which increases with increasing lipophility, but not excite at 400 mg/kg. Conclusion: It was shown that the use of combination of non-toxic doses of cisplatin (cPt) or cyclophosphamide with CHA in most cases result in the appearance of a considerable anti-tumor effect of cytostatics. The highest chemosensitizing activity with respect to leukemia Р388 is demonstrated by the CHA derivatives of Valine 1c or 2c.

Design, Synthesis, and Pharmacokinetic Evaluation of O-Carbamoyl Tizoxanide Prodrugs

2020 ◽  
Vol 16 ◽  
Author(s):  
Xi He ◽  
Wenjun Hu ◽  
Fanhua Meng ◽  
Xingzhou Li
Keyword(s):  
Plasma Concentration ◽  
Broad Spectrum ◽  
Plasma Concentrations ◽  
Antiviral Drug ◽  
Systemic Exposure ◽  
Pharmacokinetic Profile ◽  
Hydroxyl Group ◽  
First Pass

Background: The broad-spectrum antiparasitic drug nitazoxanide (N) has been repositioned as a broad-spectrum antiviral drug. Nitazoxanide’s in vivo antiviral activities are mainly attributed to its metabolitetizoxanide, the deacetylation product of nitazoxanide. In reference to the pharmacokinetic profile of nitazoxanide, we proposed the hypotheses that the low plasma concentrations and the low system exposure of tizoxanide after dosing with nitazoxanide result from significant first pass effects in the liver. It was thought that this may be due to the unstable acyloxy bond of nitazoxanide. Objective: Tizoxanide prodrugs, with the more stable formamyl substituent attached to the hydroxyl group rather than the acetyl group of nitazoxanide, were designed with the thought that they might be more stable in plasma. It was anticipated that these prodrugs might be less affected by the first pass effect, which would improve plasma concentrations and system exposure of tizoxanide. Method: These O-carbamoyl tizoxanide prodrugs were synthesized and evaluated in a mouse model for pharmacokinetic (PK) properties and in an in vitro model for plasma stabilities. Results: The results indicated that the plasma concentration and the systemic exposure of tizoxanide (T) after oral administration of O-carbamoyl tizoxanide prodrugs were much greater than that produced by equimolar dosage of nitazoxanide. It was also found that the plasma concentration and the systemic exposure of tizoxanide glucuronide (TG) were much lower than that produced by nitazoxanide. Conclusion: Further analysis showed that the suitable plasma stability of O-carbamoyl tizoxanide prodrugs is the key factor in maximizing the plasma concentration and the systemic exposure of the active ingredient tizoxanide.

scholarly journals Development, Characterization and In Vivo Pharmacokinetic Assessment of Rectal Suppositories Containing Combination Antiretroviral Drugs for HIV Prevention

Pharmaceutics ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1110
Author(s):  
Kunal Jhunjhunwala ◽  
Charles W. Dobard ◽  
Sunita Sharma ◽  
Natalia Makarova ◽  
Angela Holder ◽  
...  
Keyword(s):  
Hiv Prevention ◽  
Antiretroviral Drugs ◽  
Water Soluble ◽  
Fixed Dose ◽  
Receptive Anal Intercourse ◽  
On Demand ◽  
Dose Combination ◽  
Rectal Suppositories

Receptive anal intercourse (RAI) contributes significantly to HIV acquisition underscoring the need to develop HIV prevention options for populations engaging in RAI practices. We explored the feasibility of formulating rectal suppositories with potent antiviral drugs for on-demand use. A fixed-dose combination of tenofovir (TFV) and elvitegravir (EVG) (40 mg each) was co-formulated in six different suppository bases (three fat- and three water-soluble). Fat-soluble witepsol H15 and water-soluble polyethylene glycol (PEG) based suppositories demonstrated favorable in vitro release and were advanced to assess in vivo pharmacokinetics following rectal administration in macaques. In vivo drug release profiles were similar for both suppository bases. Median concentrations of TFV and EVG detected in rectal fluids at 2 h were 1- and 2-logs higher than the in vitro IC50, respectively; TFV-diphosphate levels in rectal tissues met or exceeded those associated with high efficacy against rectal simian HIV (SHIV) exposure in macaques. Leveraging on these findings, a PEG-based suppository with a lower dose combination of tenofovir alafenamide (TAF) and EVG (8 mg each) was developed and found to achieve similar rectal drug exposures in macaques. This study establishes the utility of rectal suppositories as a promising on-demand strategy for HIV PrEP and supports their clinical development.

Sign in / Sign up

Export Citation Format

Share Document