scholarly journals Effectiveness of Riboflavin and Rose Bengal Photosensitizer Modified Adhesive Resin for Orthodontic Bonding

2021 ◽  
Vol 14 (1) ◽  
pp. 48
Author(s):  
Ali Alqerban
Keyword(s):  
Mtt Assay ◽  
Rose Bengal ◽  
Antibacterial Properties ◽  
Homogenization Method ◽  
Tooth Surface ◽  
Control Group ◽  
Adhesive Resin ◽  
Adhesive Remnant Index ◽  
Significant Difference ◽  
Sem Imaging

This study aimed to evaluate the effect of riboflavin (RF) and rose Bengal (RB) photosensitizer modified adhesive resin on the degree of conversion (DC), and antimicrobial capacity after bonded to tooth surface. Different concentrations of RB and RF were prepared by homogenization method. An ultraviolet light source A (UVA) (375 nm wavelength, 3 mW/cm2 power) was used for 30 min irradiation.FTIR was performed for control and test adhesives to analyze the DC. Antibacterial testing was performed using the MTT assay. Metal brackets were bonded using the modified adhesives and subjected for SEM examination. The surfaces of teeth and metal brackets were examined at ×10 magnification for assessing adhesive remnant index (ARI) after PDT, 24 h and thermocycling. For DC, control group, 0.1% RB and RF after PDT showed the highest value. SEM imaging indicated lowest growth of Streptococcus mutans over 0.5% of RB-PDT and RF-PDT as compared to the control group. The MTT assay outcomes reported that the activity of S. mutans substantially decreased with the addition of a high amount of either RB or RF (p < 0.01). Mean ARI scores showed a significant difference between all groups. This study concluded that 0.1% of either RB or RF after PDT can be used for bonding orthodontic brackets to the tooth surface with substantial antibacterial properties.

Evaluation of physical and adhesive properties of enamel after a therapeutic dose of radiation and bonding of orthodontic metal brackets: an in vitro study

2020 ◽  
pp. 1-5
Author(s):  
A. Anushree ◽  
Ashutosh Shetty ◽  
Crystal Runa Soans ◽  
M. N. Kuttappa ◽  
Akhil Shetty ◽  
...  
Keyword(s):  
Testing Machine ◽  
In Vitro Study ◽  
Tooth Surface ◽  
Control Group ◽  
Adhesive Properties ◽  
Adhesive Resin ◽  
Adhesive Remnant Index ◽  
Group 3 ◽  
Group 2

Abstract Aim: The study aimed to evaluate the shear bond strength (SBS) of metal brackets and adhesive properties of bonded irradiated and non-irradiated teeth. Methods: Sixty-six extracted premolar samples were randomly divided into three groups—(a) Control group consisting of 22 non-irradiated, non-aged teeth (Group 1), (b) 22 non-irradiated, aged samples (Group 2) and (c) 22 irradiated, aged samples (Group 3). Irradiation was done using gamma irradiation with a fractionated dose of 60 Gy for 5 consecutive days per week over 6 weeks. Metal brackets were bonded on all samples with light cure adhesive and subjected to SBS test using universal testing machine. The samples were assessed under the scanning electron microscope to check for the adhesive remnant index (ARI) and tag depth. Results: There was a statistically significant decrease in the mean SBS of the irradiated samples compared to the non-irradiated teeth. The non-irradiated, aged samples showed a majority of ARI scoring 1 and 2. Whereas, the irradiated samples showed ARI scoring 2 and 3. Approximately, 77·3% of the non-irradiated samples showed no adhesive present on the tooth surface, and 27·2% of the irradiated samples had more than 50% adhesive present on the enamel surface. Conclusion: There is a statistically significant decrease in SBS of irradiated enamel compared to that of non-irradiated teeth. However, the SBS observed in the three groups was well above the ideal SBS for orthodontic bonding, that is, 5·6–6·8 MPa. The adhesive remnant was found on all samples of the irradiated group. Deeper adhesive resin tags were found in the irradiated group in the resin–enamel interface.

scholarly journals Antibiofilm Activity of Mangosteen (Garcinia mangostana L.) Flavonoids against Streptococcus mutans Bacteria

2020 ◽  
Vol 10 (2) ◽  
pp. 48
Author(s):  
Sri Kunarti ◽  
Aulia Ramadhani ◽  
Laskmiari Setyowati
Keyword(s):  
Dental Caries ◽  
Streptococcus Mutans ◽  
Tooth Enamel ◽  
Tooth Surface ◽  
Control Group ◽  
Antibiofilm Activity ◽  
Garcinia Mangostana ◽  
Control Group Design ◽  
Biofilm Inhibition ◽  
Significant Difference

Background: Dental caries is one of the most common infectious diseases and often occurs in the community caused by bacteria. Attached bacteria in the tooth surface for a long time will form a biofilm and will lead to demineralization characterized by damage in the structure of the tooth enamel. The bacteria that cause dental caries and can form biofilms is Streptococcus mutans. The bacteria inside biofilms are more resistant to antibacterial agents. Flavonoids in mangosteen pericarp extract can be a cleaner alternative for the anti-biofilm cavity that has properties against Streptococcus mutans. Purpose: To determine the activity of flavonoids in mangosteen pericarp extract at a certain concentration against Streptococcus mutans bacteria. Methods: This study was a laboratory experimental study with a post-test only control group design. Streptococcus mutans were diluted according to the Mc Farland dilution standard 106 in Tryptic Soy Broth (TSB) medium and put in a flexible U-bottom microtiter plate. Then it was incubated for 5x24 hours and checked using crystal violet simple staining to see the formation of biofilms. Flavonoid extract of mangosteen pericarp performed serial dilution in a concentration of 100%, 50%, 25%, 12.5%, 6.25%, 3.125%, 1.56%, and 0.78% was added, and the incubation process were conducted for 1x24 hours. OD (Optical Density) readings were done with a wavelength of 595 nm. Results: There was a significant difference between the test groups and the positive control group. The concentration of 100% had the anti-biofilm activity and showed the value of the highest percentage of inhibition, whilst the concentration of 0.78% showed a minimum biofilm inhibition concentration. The results were demonstrated by a statistical analysis test. Conclusion: Flavonoid extract of mangosteen pericarp at a certain concentration has anti-biofilm activity against Streptococcus mutans biofilm.

scholarly journals Expression of AIM2 in rheumatoid arthritis and its role on fibroblast-like synoviocyte

2020 ◽  
Author(s):  
fujuan qiu ◽  
Chen Yong ◽  
Qiu Fujuan ◽  
Zhao Xiaofeng ◽  
Xiao Changhong
Keyword(s):  
Rheumatoid Arthritis ◽  
Mtt Assay ◽  
Control Group ◽  
Expression Levels ◽  
Potential Target ◽  
Caspase 1 ◽  
Significant Difference ◽  
And Migration ◽  
Fibroblast Like Synoviocytes ◽  
Proliferation And Migration

Abstract Background To determine whether any differences of AIM2 inflammasome expression levels between rheumatoid arthritis (RA) and osteoarthritis (OA) and investigate the effects of AIM2 when transferred into RA fibroblast-like synoviocytes (RA-FLS).Methods Serum AIM2 levels between OA and RA patients were compared by ELISA. Different expression levels of AIM2, ASC, Caspase-1 and IL-1β between RA and OA synovium were semi-quantified by RT-qPCR and immunohistochemical (IHC) staining. IHC staining were recorded by H scores, and determine the correlation with ESR and CRP levels of RA patients. SiRNA AIM2 was transferred to RA-FLS and observe its effects on proliferation and migration by MTT assay and transwell test respectively.Results In RA sera, no significant difference was observed between OA and RA patients. However, in affected knee synovium, AIM2, ASC, Caspase-1 and IL-1β were expressed higher in RA than that of OA. Plus, H score of AIM2, ASC, and IL-1β were positively correlated to ESR and CRP levels in RA patients. After transferred AIM2 siRNA to FLS and incubation for 48 hours, the proliferation of FLS were significantly inhibited, and the apoptosis rate were significantly increased compared to FLS in control group. However, no effect on migration was detected.Conclusions AIM2 participated in the proliferation of FLS, and might be a potential target for therapy.

scholarly journals Evaluation of the Effects of 660-nm and 810-nm Low-Level Diode Lasers on the Treatment of Dentin Hypersensitivity

2020 ◽  
Vol 11 (2) ◽  
pp. 126-134
Author(s):  
Narges Naghsh ◽  
Mahdi Kachuie ◽  
Marzie Kachuie ◽  
Reza Birang
Keyword(s):  
Diode Laser ◽  
Repeated Measures ◽  
Diode Lasers ◽  
Tooth Surface ◽  
Control Group ◽  
Dentin Hypersensitivity ◽  
Double Blind ◽  
Group I ◽  
Significant Difference ◽  
Laser Group

Introduction: Dentin hypersensitivity is a common oral problem that occurs as a short and sharp pain. There are many techniques to treat this condition, the latest of which is laser treatment. The aim of this study was to evaluate the effect of two types of low-power diode lasers (660 nm and 810 nm) on dentin hypersensitivity in order to achieve an acceptable clinical application by adjusting the effective parameters. Methods: In this randomized, double-blind clinical trial, sensitive teeth of 7 patients were divided into three groups with a randomized matching method: group I, treated with 660-nm diode laser irradiation, group II, treated with diode laser 810-nm, and group III, the control group. Irradiation parameters for 660-nm and 810-nm diode lasers were the power of 30 mW and 100 mW respectively, in contact and continuous modes, perpendicular to the tooth surface with a sweeping motion. Treatments were carried out in four sessions at weekly intervals. The data obtained were analyzed with SPSS 22, using one-way repeated measures ANOVA and the LSD (least significant difference) test. The significance level was considered as P≤0.05. Results: There were no significant differences in visual analogue scale (VAS) score changes between the two laser groups after the intervention in the first, second and third weeks compared to the baseline (P>0.05). These changes in the fourth week were significantly higher in the 810-nm laser group compared to the 660-nm laser group (P=0.04), and in the 660-nm laser group, they were more than the control group (P=0.02). The mean VAS scores at 1-week, 1-month and 2-month postoperative intervals were significantly lower in the 810-nm laser group than in the 660-nm laser group, and in the 660-nm laser group, they were less than the control group (P<0.001). Conclusion: The use of 660-nm and 810-nm diode lasers with the power of 30 and 100 mW respectively for 120 seconds was effective in reducing pain in patients with dentin hypersensitivity. However, the effect of the 810-nm laser on reducing the dentin hypersensitivity was more long-lasting than that of the 660-nm laser.

scholarly journals Evaluation of the Physicochemical and Antibacterial Properties of Experimental Adhesives Doped with Lithium Niobate

Polymers ◽  
2020 ◽  
Vol 12 (6) ◽  
pp. 1330 ◽  
Author(s):  
Laisa Cruzetta ◽  
Isadora M. Garcia ◽  
Gabriela de Souza Balbinot ◽  
Amanda S. Motta ◽  
Fabrício M. Collares ◽  
...  
Keyword(s):  
Statistical Difference ◽  
Antibacterial Properties ◽  
Control Group ◽  
Microtensile Bond Strength ◽  
Adhesive Resin ◽  
Dental Adhesives ◽  
Dental Adhesive ◽  
Negative Effect ◽  
Methacrylate Monomers

The aim of the present study was to formulate dental adhesives with different concentrations of LiNbO3 and to evaluate their physicochemical and antibacterial properties. A dental adhesive was formulated using methacrylate monomers and photoinitiators and used as a control filler-free group. Subsequently, three experimental adhesives doped with LiNbO3 at different concentrations (1 wt.%, 2 wt.%, and 5 wt.%) were also formulated. All the experimental adhesives were assessed to evaluate the degree of conversion (DC), softening in solvent, immediate and long-term microtensile bond-strength (μ-TBS), radiopacity, ultimate tensile strength, and antibacterial activity. The incorporation of 1 wt.% of LiNbO3 had no negative effect on the DC of the adhesive resin compared to the control group (p > 0.05). We observed a decrease in the percentage of softening in solvent in the group LiNbO3 at 1 wt.% (p < 0.05). The addition of LiNbO3 increased the radiopacity at a concentration above 2 wt.%, and there was also an increase in cohesive strength (p < 0.05). The immediate μ-TBS increased for LiNbO3 at 5 wt.% (p < 0.05), and there was no statistical difference for the other groups compared to the control (p > 0.05). After six months, the group with 5 wt.% still presented the highest μ-TBS (p < 0.05). The adhesives showed no antimicrobial activity (p > 0.05). LiNbO3 was successfully incorporated in dental adhesives, increasing the radiopacity and their resistance to degradation. Although LiNbO3 offered no antibacterial properties, the reliability of LiNbO3 incorporation in the adhesive encourages new tests to better investigate the antimicrobial action of LiNbO3 through temperature variation.

scholarly journals Evaluation of the bond strength of orthodontic brackets and the degree of polymerisation and microhardness of an orthodontic adhesive using polyvawe light curing unit and varying light densities

2020 ◽  
Vol 23 (4) ◽  
pp. 9p
Author(s):  
Nuri Mert Topbasi ◽  
Yasin Atakan Benkli
Keyword(s):  
Bond Strength ◽  
Light Emitting Diode ◽  
Control Group ◽  
Bond Failure ◽  
Adhesive Resin ◽  
Mean Values ◽  
Light Emitting ◽  
Significant Difference ◽  
Light Curing

Objective: This study evaluates the shear bond strength (SBS) and Vickers micro-hardness (VHN) of the orthodontic adhesive resin Transbond XT using thermocycled samples. The study also measures the degree of cure by poliwave light curing unit Valo. Materials and Methods: 135 brackets were bonded for the SBS test, and 90 disc-shaped orthodontic adhesive resins were prepared for the VHN test. The measurements were taken either immediately or after 500 or 10.0000 thermocycling. The SBS and VHN test data were statistically evaluated using a Two-way ANOVA and Tukey multiple comparison tests. The degree of conversion (DC) was measured by FTIR. Results: The 10-sec polymerized control group (57.08) and the 10.000 termocycled samples (55.96) had the highest VHN scores. On the other hand, the 3 second polymerized and the 10.000 termocycled samples (39.22) had the lowest VHN scores. There was no significant difference in the bracket SBS values between the termocycled and immediate groups. An evaluation of the bond failure surfaces revealed that the ARI scores did not differ between the immediate and the thermo-cycled groups according to the power modes. The FTIR results revealed that the lowest DC was seen in the 3 second light-cured sample. Conclusion: Transbond XT provided sufficient bonding in terms of microhardness and DC under in vitro bracket bonding conditions after 10 and 8 seconds of Poliwave LED curing. However, low mean values were seen in the groups that received Poliwave LED curing for only 3 seconds. KEYWORDSARI score; FTIR; Light-Emitting Diode; Orthodontics; Thermocycling.

scholarly journals ANTIBACTERIAL EFFECTIVITY OF KASTURI LEAF EXTRACT (Mangifera casturi) AGAINST THE GROWTH OF Streptococcus sanguinis BACTERIA

2020 ◽  
Vol 5 (1) ◽  
pp. 33
Author(s):  
Dita Puspita Sari ◽  
Didit Aspriyanto ◽  
Irham Taufiqurrahman
Keyword(s):  
Leaf Extract ◽  
Periodontal Diseases ◽  
Tooth Surface ◽  
Control Group ◽  
Dilution Method ◽  
Control Group Design ◽  
Streptococcus Sanguinis ◽  
Significant Difference ◽  
Post Hoc ◽  
One Way Anova

Background: Caries is a disease that occurs because of the fermentation carbohydrates process by microorganisms in the oral cavity. One of the bacteria that causes caries is Streptococcus sanguinis. These bacteria will colonize on the tooth surface, then form dental plaques and contribute to the causes of caries and other periodontal diseases. Kasturi leaf extract (Mangifera casturi) has various compounds such as tannins, terpenoids, alkaloids, and flavonoids that have antimicrobial substances. Purpose: The aim of this study was to determine antibacterial effectivity of kasturi leaf extract (Mangifera casturi) against the growth of Streptococcus sanguinis bacteria. Method: This research was an experimental method laboratory (true experimental), with a randomized pre test and post test with control group design using 5 treatments: kasturi leaf extract (concentration: 20 mg/ml, 25 mg/ml, and 30 mg/ml); and two groups of control: positive control and negative control. Each treatment was repeated 5 times. Antibacterial activity testing used a liquid dilution method. Measurement of minimum inhibitory concentration (MIC) used a Uv-Vis Spectrophotometer and measurement of the minimum bactericidal concentration (MBC) used a colony counter. The MIC data were analyzed using One Way Anova and continued with the Dunnet Post Hoc test. MBC data were analyzed using the Kruskal-Wallis test and continued with the Mann-Whitney Post Hoc test. Result: One-Way Anova test showed that MIC had a significant difference, and the Kruskal-Wallis test showed that MBC also had significant differences. MIC was obtained at the concentration of 20 mg/ml and MBC was obtained at the concentration of 30 mg / ml. Conclusion: There is antibacterial effectiveness in kasturi leaf extract (Mangifera casturi) against the growth of Streptococcus sanguinis.

Antibacterial Properties and Application of Nanosilver Material in the Tracheal Tube

2020 ◽  
Vol 20 (10) ◽  
pp. 6542-6546
Author(s):  
Yunjie Hu ◽  
Xiaobei Ji ◽  
Dunshuang Wei ◽  
Jun Deng
Keyword(s):  
Endotracheal Tube ◽  
Endotracheal Intubation ◽  
Tracheal Tube ◽  
Antibacterial Properties ◽  
Plate Count ◽  
Control Group ◽  
Significant Difference ◽  
New Type ◽  
Experimental Group

To investigate the antibacterial ability of a new type of antibacterial tracheal tube coated with nanosilver/polyurethane in rats. In January 2016, 48 male SD rats of SPF grade, provided by the medical center of Hong Kong University of science and technology, Peking University, Shenzhen, were selected as the study objects. Twenty-four healthy rats, who underwent endotracheal intubation and retained nanosilver/polyurethane-coated new antibacterial endotracheal tube in vivo, were randomly selected as the experimental group, while 24 healthy rats who underwent endotracheal intubation at the same time and retained common endotracheal tube in vivo were randomly selected as the control group. At 12, 24, 48, and 72 hours after the operation, the number of colonies in the alveolar lavage fluid of the two groups was measured using the plate count method, and the thickness of the biofilm formed by the built-in catheter of the two groups was observed by microscope. Twelve hours after operation, there was no significant difference between the two groups (P <0.05). The colony number in BALF in the experimental group was significantly lower than that in the control group (P < 0.05). At 12 and 24 hours after operation, there was no significant difference in the biofilm thickness between the two groups (P > 0.05). In the experimental group, the thickness of biofilm that had formed by catheterization 48 and 72 hours after operation was significantly lower than that in the control group (P < 0.05). The new type of antibacterial tracheal tube, coated with nanosilver/polyurethane, has stronger antibacterial and anti-biofilm proliferation performance than that of the common tracheal tube.

scholarly journals Thermocycling Effects on Shear Bond Strength of a Self-Etching Primer

2008 ◽  
Vol 78 (2) ◽  
pp. 351-356 ◽  
Author(s):  
Selma Elekdag-Turk ◽  
Tamer Turk ◽  
Devrim Isci ◽  
Nurhat Ozkalayci
Keyword(s):  
Bond Strength ◽  
Conventional Method ◽  
Control Group ◽  
Thermal Cycles ◽  
Bond Failure ◽  
Adhesive Remnant Index ◽  
Significant Difference ◽  
Bond Strengths ◽  
Failure Location ◽  
Experimental Group

Abstract Objective: To determine the effects of thermocycling on shear bond strengths (SBSs) of a self-etching primer (SEP) after 0, 2000, and 5000 thermal cycles. Materials and Methods: Brackets were bonded to bovine incisors with two etching protocols. In the control group (conventional method) teeth were etched with 37% phosphoric acid. In the experimental group, an SEP (Transbond Plus) was applied as recommended by the manufacturer. Brackets were bonded with light-cure adhesive paste (Transbond XT) and light cured for 20 seconds in both groups. The SBSs were measured after water storage at 37°C for 24 hours, after 2000 and 5000 cycles of thermocycling between 5°C and 55°C. Bond failure location was determined with the Adhesive Remnant Index (ARI). Results: In the control group, SBSs did not show any significant differences among 0, 2000, and 5000 thermal cycles. However, in group SEP, SBSs decreased with 2000 and 5000 thermal cycles, and these decreases were significantly different from no thermocyling (P &lt; .001). A significant difference was observed between ARI scores of the control group with 5000 thermal cycles and group SEP with no thermal cycles (P &lt; .003). In addition, a significant difference was found between group SEP with no thermocycling and with 5000 thermal cycles (P &lt; .003). Conclusion: The results of this study indicate that the SEP (Transbond Plus) provides clinically acceptable bond strength values compared with the conventional method after thermocycling.

scholarly journals Antibacterial effects of soft denture reline resin containing natural extract

2020 ◽  
Vol 11 (SPL4) ◽  
pp. 446-449
Author(s):  
Yu-Ri Choi ◽  
Min-Kyung Kang
Keyword(s):  
Contact Angle ◽  
Antibacterial Activity ◽  
Antibacterial Properties ◽  
Confocal Laser ◽  
Control Group ◽  
Denture Base ◽  
Significant Difference ◽  
Base Resin ◽  
Denture Base Resin ◽  
Experimental Group

Candida albicans (C. Albicans) is one of the bacteria that reside in the oral cavity, and the ones living in medical and commercial denture resins, commonly cause diseases. Therefore, this study was conducted to confirm the antibacterial activity of C. Albicans using a denture base resin containing peony extract with antibacterial properties. Contact angle measurements and color change measurements were performed to confirm the physical change of the material added with the antibacterial agent to the denture reline resin. As a result of the antibacterial test, the experimental group exhibited antibacterial activity against C. Albicans. Compared to the optical density results, the results of the experimental group showed a significant difference. As a result of Fluorescent images showing (confocal laser microscope), the control group showed a lot of live bacteria, and no bacteria appeared in the experimental group. All group  did not show any physical changes. As a result of the contact angle measurement, the surface of the experimental group was changed to hydrophilic. In addition, there was no change in the color of the denture reline resin containing peony extract. In conclusion, it was confirmed that the peony extract contained antibacterial activity of the denture resin, and further studies should be conducted on various bacteria for denture base resin disinfection.

Sign in / Sign up

Export Citation Format

Share Document