scholarly journals Entrapment of Citrus limon var. pompia Essential Oil or Pure Citral in Liposomes Tailored as Mouthwash for the Treatment of Oral Cavity Diseases

2020 ◽  
Vol 13 (9) ◽  
pp. 216
Author(s):  
Lucia Palmas ◽  
Matteo Aroffu ◽  
Giacomo L. Petretto ◽  
Elvira Escribano-Ferrer ◽  
Octavio Díez-Sales ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Peroxide ◽  
Essential Oil ◽  
Chemical Properties ◽  
Citrus Limon ◽  
Cryogenic Transmission Electron Microscopy ◽  
Transmission Electron ◽  
Skin Repair ◽  
Physico Chemical ◽  
Cariogenic Bacterium

This work aimed at developing a mouthwash based on liposomes loading Citrus limon var. pompia essential oil or citral to treat oropharyngeal diseases. Vesicles were prepared by dispersing phosphatidylcholine and pompia essential oil or citral at increasing amounts (12, 25 and 50 mg/mL) in water. Transparent vesicle dispersions were obtained by direct sonication avoiding the use of organic solvents. Cryogenic transmission electron microscopy (cryo-TEM) confirmed the formation of unilamellar, spherical and regularly shaped vesicles. Essential oil and citral loaded liposomes were small in size (~110 and ~100 nm, respectively) and negatively charged. Liposomes, especially those loading citral, were highly stable as their physico-chemical properties did not change during storage. The formulations were highly biocompatible against keratinocytes, were able to counteract the damages induced in cells by using hydrogen peroxide, and able to increase the rate of skin repair. In addition, liposomes loading citral at higher concentrations inhibited the proliferation of cariogenic bacterium.

scholarly journals Optimization of Innovative Three-Dimensionally-Structured Hybrid Vesicles to Improve the Cutaneous Delivery of Clotrimazole for the Treatment of Topical Candidiasis

Pharmaceutics ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 263 ◽  
Author(s):  
Maria Letizia Manca ◽  
Iris Usach ◽  
José Esteban Peris ◽  
Antonella Ibba ◽  
Germano Orrù ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chemical Properties ◽  
Chemical Characterization ◽  
Yeast Cells ◽  
Unilamellar Vesicles ◽  
Transmission Electron ◽  
Physico Chemical

New three-dimensionally-structured hybrid phospholipid vesicles, able to load clotrimazole in a high amount (10 mg/mL), were obtained for the first time in this work by significantly reducing the amount of water (≤10%), which was replaced with a mixture of glycerol and ethanol (≈90%). A pre-formulation study was carried out to evaluate the effect of both the composition of the hydrating medium and the concentration of the phospholipid on the physico-chemical properties of hybrid vesicles. Four different three-dimensionally-structured hybrid vesicles were selected as ideal systems for the topical application of clotrimazole. An extensive physico-chemical characterization performed using transmission electron microscopy (TEM), cryogenic transmission electron microscopy (cryo-TEM), 31P-NMR, and small-angle X-ray scattering (SAXS) displayed the formation of small, multi-, and unilamellar vesicles very close to each other, and was capable of forming a three-dimensional network, which stabilized the dispersion. Additionally, the dilution of the dispersion with water reduced the interactions between vesicles, leading to the formation of single unilamellar vesicles. The evaluation of the in vitro percutaneous delivery of clotrimazole showed an improved drug deposition in the skin strata provided by the three-dimensionally-structured vesicles with respect to the commercial cream (Canesten®) used as a reference. Hybrid vesicles were highly biocompatible and showed a significant antifungal activity in vitro, greater than the commercial cream Canesten®. The antimycotic efficacy of formulations was confirmed by the reduced proliferation of the yeast cells at the site of infection in vivo. In light of these results, clotrimazole-loaded, three-dimensionally-structured hybrid vesicles appear to be one of the most innovative and promising formulations for the treatment of candidiasis infections.

scholarly journals Effect of p -TsOH pretreatment on separation of bagasse components and preparation of nanocellulose filaments

2020 ◽  
Vol 7 (9) ◽  
pp. 200967
Author(s):  
Chengqi Feng ◽  
Juan Du ◽  
Shuai Wei ◽  
Chengrong Qin ◽  
Chen Liang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Transmission Electron Microscopy ◽  
Chemical Properties ◽  
Crystallinity Index ◽  
Degree Of Polymerization ◽  
Efficient Separation ◽  
Transmission Electron ◽  
Physico Chemical ◽  
Average Size

The efficient separation of bagasse components was achieved by p -toluenesulfonic acid ( p -TsOH) pretreatment. The effects of p -TsOH dosage, reaction temperature and reaction time on cellulose, hemicellulose and lignin contents were studied. Eighty-five per cent of lignin was dissolved, whereas the cellulose loss was minimal (less than 8.1%). Cellulose-rich water-insoluble residual solids were obtained. The degree of polymerization of cellulose decreased slightly, but the crystallinity index (CrI) increased from 52.0% to 68.1%. It indicated that the highly efficient delignification of bagasse was achieved by p -TsOH pretreatment. The nanocellulose filaments (CNFs) were produced by the treated samples. The physico-chemical properties of CNFs were characterized by transmission electron microscopy and thermogravimetric analysis. The results show that the CNFs have smaller average size and higher thermal stability. It provides a new method for CNFs.

Decomposition of hydrogen peroxide on nickel-silver two-component catalyst

1984 ◽  
Vol 49 (10) ◽  
pp. 2222-2230 ◽  
Author(s):  
Viliam Múčka ◽  
Rostislav Silber
Keyword(s):  
Hydrogen Peroxide ◽  
Chemical Properties ◽  
Silver Ions ◽  
Surface Concentration ◽  
Chloride Ions ◽  
Nickel Silver ◽  
Silver Catalysts ◽  
Physico Chemical ◽  
Low Degree ◽  
Defective Crystal

The catalytic and physico-chemical properties of low-temperature nickel-silver catalysts with nickel oxide concentrations up to 43.8% (m/m) are examined via decomposition of hydrogen peroxide in aqueous solution. The mixed catalysts prepared at 250°C are composed of partly decomposed silver carbonate or oxide and nickel carbonate or hydroxide decomposed to a low degree only and exhibiting a very defective crystal structure. The activity of these catalysts is determined by the surface concentration of silver ions, which is affected by the nickel component present. The latter also contributes to the thermal stability of the catalytic centres of the silver component, viz. the Ag+ ions. The concentration of these ions varies with the temperature of the catalyst treatment, the activity varies qualitatively in the same manner, and the system approaches the Ag-NiO composition. The catalytic centres are very susceptible to poisoning by chloride ions. A previous exposition of the catalyst to a gamma dose of 10 kGy from a 60Co source has no measurable effect on the physico-chemical properties of the system.

scholarly journals Probing the Na metal solid electrolyte interphase via cryo-transmission electron microscopy

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Bing Han ◽  
Yucheng Zou ◽  
Zhen Zhang ◽  
Xuming Yang ◽  
Xiaobo Shi ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Solid Electrolyte ◽  
Solid Electrolyte Interphase ◽  
Metal Electrode ◽  
Liquid Electrolyte ◽  
Battery Materials ◽  
Cryogenic Transmission Electron Microscopy ◽  
Transmission Electron ◽  
Fluoroethylene Carbonate

AbstractCryogenic transmission electron microscopy (cryo-TEM) is a valuable tool recently proposed to investigate battery electrodes. Despite being employed for Li-based battery materials, cryo-TEM measurements for Na-based electrochemical energy storage systems are not commonly reported. In particular, elucidating the chemical and morphological behavior of the Na-metal electrode in contact with a non-aqueous liquid electrolyte solution could provide useful insights that may lead to a better understanding of metal cells during operation. Here, using cryo-TEM, we investigate the effect of fluoroethylene carbonate (FEC) additive on the solid electrolyte interphase (SEI) structure of a Na-metal electrode. Without FEC, the NaPF6-containing carbonate-based electrolyte reacts with the metal electrode to produce an unstable SEI, rich in Na2CO3 and Na3PO4, which constantly consumes the sodium reservoir of the cell during cycling. When FEC is used, the Na-metal electrode forms a multilayer SEI structure comprising an outer NaF-rich amorphous phase and an inner Na3PO4 phase. This layered structure stabilizes the SEI and prevents further reactions between the electrolyte and the Na metal.

scholarly journals Alpha helical surfactant-like peptides self-assemble into pH-dependent nanostructures

Soft Matter ◽  
2021 ◽  
Vol 17 (11) ◽  
pp. 3096-3104
Author(s):  
Valeria Castelletto ◽  
Jani Seitsonen ◽  
Janne Ruokolainen ◽  
Ian W. Hamley
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Small Angle ◽  
Self Assembly ◽  
X Ray ◽  
Cryogenic Transmission Electron Microscopy ◽  
X Ray Scattering ◽  
Transmission Electron ◽  
Ph Dependent ◽  
Ray Scattering

A designed surfactant-like peptide is shown, using a combination of cryogenic-transmission electron microscopy and small-angle X-ray scattering, to have remarkable pH-dependent self-assembly properties.

Three-Dimensional Holey-Graphene Architectures for Highly Sensitive Enzymatic Electrochemical Determination of Hydrogen Peroxide

2019 ◽  
Vol 19 (11) ◽  
pp. 7404-7409 ◽  
Author(s):  
Aihua Jing ◽  
Gaofeng Liang ◽  
Hao Shi ◽  
Yixin Yuan ◽  
Quanxing Zhan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Hydrogen Peroxide ◽  
Graphene Oxide ◽  
Three Dimensional ◽  
Electrochemical Determination ◽  
High Specific Surface Area ◽  
3D Graphene ◽  
Practical Applications ◽  
Transmission Electron ◽  
Mild Defect

Three-dimensional (3D) graphene with high specific surface area, excellent conductivity and designed porosity is essential for many practical applications. Herein, holey graphene oxide with nano pores was facilely prepared via a convenient mild defect-etching reaction and then fabricated to 3D nanostructures via a reduction method. Based on the 3D architectures, a novel enzymatic hydrogen peroxide sensor was successfully fabricated. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to characterize the 3D holey graphene oxide architectures (3DHGO). Cyclic voltammetry (CV) was used to evaluate the electrochemical performance of 3DHGO at glassy carbon electrode (GCE). Excellent electrocatalytic activity to the reduction of H2O2 was observed, and a linear range of 5.0×10-8~5.0×10-5 M with a detection limit of 3.8×10-9 M was obtained. These results indicated that 3DHGO have potential as electrochemical biosensors.

Application of the polycaprolactone polymer for the encapsulation of geraniol: evaluation of the efficiency and stability

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Thaís Karoline Carniel ◽  
Pâmela Fagundes ◽  
Ana Carolina Vivan ◽  
Luciano Luiz Silva ◽  
Micheli Zanetti ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Essential Oil ◽  
Natural Compound ◽  
Thermal Protection ◽  
Miniemulsion Polymerization ◽  
Food Preservation ◽  
Transmission Electron ◽  
Mean Size ◽  
Antibacterial And Antifungal

Abstract Geraniol has been an attractive compound for food preservation due to its antibacterial and antifungal actions. The main objective of this study was to produce and characterize polycaprolactone (PCL) capsules for the protection of the encapsulated geraniol essential oil. The encapsulation was carried out using a miniemulsion polymerization technique with an efficiency of (95.44 ± 0.60%). The capsules were obtained with a mean size of 148 nm and with a polydispersity index of 0.12. Transmission electron microscopy results confirmed the formation of spherical capsules of PCL coating the geraniol. From the analysis of thermogravimetry, it was possible to prove the thermal protection of geraniol by PCL coating since the release of the encapsulated geraniol occurred with temperatures 100 °C higher than the volatilization temperature of the natural compound. An important observation was that the microcapsules of PCL-geraniol immersed in aqueous suspensions at 4 °C showed good stability over 60 days.

Sign in / Sign up

Export Citation Format

Share Document