scholarly journals Study of In Vitro and In Vivo Carbamazepine Release from Coarse and Nanometric Pharmaceutical Emulsions Obtained via Ultra-High-Pressure Homogenization

2020 ◽  
Vol 13 (4) ◽  
pp. 53
Author(s):  
Juan D. Echeverri ◽  
Maria J. Alhajj ◽  
Nicolle Montero ◽  
Cristhian J. Yarce ◽  
Alvaro Barrera-Ocampo ◽  
...  
Keyword(s):  
High Pressure ◽  
Drug Release ◽  
High Pressure Homogenization ◽  
Promising Alternative ◽  
Ultra High Pressure ◽  
Oil In Water ◽  
Droplet Sizes ◽  
Model Drug

In the past decade, pharmaceutical nanotechnology has proven to be a promising alternative for improving the physicochemical and biopharmaceutical features for conventional pharmaceutical drug formulations. The goal of this study was to develop, characterize, and evaluate the in vitro and in vivo release of the model drug carbamazepine (CBZ) from two emulsified formulations with different droplet sizes (coarse and nanometric). Briefly, oil-in-water emulsions were developed using (i) Sacha inchi oil, ultrapure water, TweenTM 80, and SpanTM 80 as surfactants, (ii) methyl-paraben and propyl-paraben as preservatives, and (iii) CBZ as a nonpolar model drug. The coarse and nanometric emulsions were prepared by rotor–stator dispersion and ultra-high-pressure homogenization (UHPH), respectively. The in vitro drug release studies were conducted by dialysis, whereas the in vivo drug release was evaluated in New Zealand breed rabbits. The results showed that nanoemulsions were physically more stable than coarse emulsions, and that CBZ had a very low release for in vitro determination (<2%), and a release of 20% in the in vivo study. However, it was found that nanoemulsions could significantly increase drug absorption time from 12 h to 45 min.

scholarly journals Development and Evaluation of Clove and Cinnamon Supercritical Fluid Extracts-Loaded Emulgel for Antifungal Activity in Denture Stomatitis

Gels ◽  
2022 ◽  
Vol 8 (1) ◽  
pp. 33
Author(s):  
Meenakshi Srinivas Iyer ◽  
Anil Kumar Gujjari ◽  
Sathishbabu Paranthaman ◽  
Amr Selim Abu Lila ◽  
Khaled Almansour ◽  
...  
Keyword(s):  
Drug Release ◽  
Cure Rate ◽  
In Vitro Drug Release ◽  
Promising Alternative ◽  
Denture Stomatitis ◽  
Antifungal Effects ◽  
The Common ◽  
Central Composite

Denture stomatitis (DS), usually caused by Candida infection, is one of the common denture-related complications in patients wearing dentures. Clove and cinnamon oils have been acknowledged for their anti-inflammatory, antimicrobial activity, and antifungal effects in the oral cavity. The aim of this study, therefore, was to prepare clove/cinnamon oils-loaded emulgel and to assess its efficacy in treating Candida albicans-associated denture stomatitis. Central composite design was adopted to formulate and optimize clove/cinnamon extracts-loaded emulgel. The formulated preparations were assessed for their physical appearance, particle size, viscosity, spreadability, and in-vitro drug release. In addition, in-vivo therapeutic experiments were conducted on 42 patients with denture stomatitis. The prepared emulgel formulations showed good physical characteristics with efficient drug release within 3 h. In addition, in-vivo antifungal studies revealed that the optimized formula significantly (p < 0.001) reduced Candida colony counts from the denture surface, compared to commercially available gel (240.38 ± 27.20 vs. 398.19 ± 66.73 CFU/mL, respectively). Furthermore, the optimized formula and succeeded in alleviating denture stomatitis-related inflammation with a better clinical cure rate compared to commercially available gel Collectively, herbal extracts-loaded emulgel might be considered an evolution of polyherbal formulations and might represent a promising alternative to the existing allopathic drugs for the treatment of denture stomatitis, with better taste acceptability and no side effects.

scholarly journals Double Optimization of Rivastigmine-Loaded Nanostructured Lipid Carriers (NLC) for Nose-to-Brain Delivery Using the Quality by Design (QbD) Approach: Formulation Variables and Instrumental Parameters

Pharmaceutics ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 599 ◽  
Author(s):  
Sara Cunha ◽  
Cláudia Pina Costa ◽  
Joana A. Loureiro ◽  
Jorge Alves ◽  
Andreia F. Peixoto ◽  
...  
Keyword(s):  
Particle Size ◽  
High Pressure ◽  
Drug Release ◽  
Quality By Design ◽  
Nanostructured Lipid Carriers ◽  
Brain Delivery ◽  
High Pressure Homogenization ◽  
Ultrasound Technique ◽  
Formulation Variables

Rivastigmine is a drug commonly used in the management of Alzheimer’s disease that shows bioavailability problems. To overcome this, the use of nanosystems, such as nanostructured lipid carriers (NLC), administered through alternative routes seems promising. In this work, we performed a double optimization of a rivastigmine-loaded NLC formulation for direct drug delivery from the nose to the brain using the quality by design (QbD) approach, whereby the quality target product profile (QTPP) was the requisite for nose to brain delivery. The experiments started with the optimization of the formulation variables (or critical material attributes—CMAs) using a central composite design. The rivastigmine-loaded NLC formulations with the best critical quality attributes (CQAs) of particle size, polydispersity index (PDI), zeta potential (ZP), and encapsulation efficiency (EE) were selected for the second optimization, which was related to the production methods (ultrasound technique and high-pressure homogenization). The most suitable instrumental parameters for the production of NLC were analyzed through a Box–Behnken design, with the same CQAs being evaluated for the first optimization. For the second part of the optimization studies, were selected two rivastigmine-loaded NLC formulations: one produced by ultrasound technique and the other by the high-pressure homogenization (HPH) method. Afterwards, the pH and osmolarity of these formulations were adjusted to the physiological nasal mucosa values and in vitro drug release studies were performed. The results of the first part of the optimization showed that the most adequate ratios of lipids and surfactants were 7.49:1.94 and 4.5:0.5 (%, w/w), respectively. From the second part of the optimization, the results for the particle size, PDI, ZP, and EE of the rivastigmine-loaded NLC formulations produced by ultrasound technique and HPH method were, respectively, 114.0 ± 1.9 nm and 109.0 ± 0.9 nm; 0.221 ± 0.003 and 0.196 ± 0.007; −30.6 ± 0.3 mV and −30.5 ± 0.3 mV; 97.0 ± 0.5% and 97.2 ± 0.3%. Herein, the HPH was selected as the most suitable production method, although the ultrasound technique has also shown effectiveness. In addition, no significant changes in CQAs were observed after 90 days of storage of the formulations at different temperatures. In vitro studies showed that the release of rivastigmine followed a non-Fickian mechanism, with an initial fast drug release followed by a prolonged release over 48 h. This study has optimized a rivastigmine-loaded NLC formulation produced by the HPH method for nose-to-brain delivery of rivastigmine. The next step is for in vitro and in vivo experiments to demonstrate preclinical efficacy and safety. QbD was demonstrated to be a useful approach for the optimization of NLC formulations for which specific physicochemical requisites can be identified.

scholarly journals Characterization of Whey Protein Oil-In-Water Emulsions with Different Oil Concentrations Stabilized by Ultra-High Pressure Homogenization

Processes ◽  
2017 ◽  
Vol 5 (4) ◽  
pp. 6 ◽  
Author(s):  
Essam Hebishy ◽  
Anna Zamora ◽  
Martin Buffa ◽  
Anabel Blasco-Moreno ◽  
Antonio-José Trujillo
Keyword(s):  
High Pressure ◽  
Whey Protein ◽  
High Pressure Homogenization ◽  
Ultra High Pressure ◽  
Oil In Water

In vitro and In vivo Characterization of Pectin Based In situ Gelling System of Famotidine

2013 ◽  
Vol 5 (4) ◽  
pp. 1885-1894
Author(s):  
Mohmadmoin K. Modasiya ◽  
A K Patel ◽  
V.M Patel ◽  
G.C Patel
Keyword(s):  
Drug Release ◽  
Calcium Chloride ◽  
Fickian Diffusion ◽  
Similarity Factor ◽  
Drug Content ◽  
Model Drug ◽  
In Situ Gelling

In this study famotidine was used as a model drug to formulate and evaluate pH-induced in situ gelling system for oral sustained release drug delivery in stomach which has shorter biological half-life. To study the effect of independent variables 32 full factorial design was employed, concentration of pectin as pH dependant polymer and concentration of calcium chloride on dependent variables like viscosity, drug content, 50% and 80% drug release and similarity factor. It was found that both the concentration of pectin and concentration of calcium chloride had significant effect on viscosity, drug content, 50% and 80% drug release and similarity factor of the system. In vitro drug release study showed that drug released from the in situ gel followed non-Fickian diffusion. Mathematical modeling was employed for quantitative evaluation of the effect of formulation variables. Rat pylorus legation model was used for in vivo study of the selected formulation. Results shows gel formation in gastric juice and reduction in ulcer index. There were few or no major changes in the formulation during three months stability testing. The in situ gelling systems are useful for delivery of famotidine.

scholarly journals Determining the Polymer Threshold Amount for Achieving Robust Drug Release from HPMC and HPC Matrix Tablets Containing a High-Dose BCS Class I Model Drug: In Vitro and In Vivo Studies

2014 ◽  
Vol 16 (2) ◽  
pp. 398-406 ◽  
Author(s):  
Uroš Klančar ◽  
Saša Baumgartner ◽  
Igor Legen ◽  
Polona Smrdel ◽  
Nataša Jeraj Kampuš ◽  
...  
Keyword(s):  
Drug Release ◽  
Matrix Tablets ◽  
Class I ◽  
In Vivo Studies ◽  
High Dose ◽  
Model Drug ◽  
Threshold Amount

scholarly journals Characterization and Compatibility Studies of Different Rate Retardant Polymer Loaded Microspheres by Solvent Evaporation Technique: In Vitro-In Vivo Study of Vildagliptin as a Model Drug

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Irin Dewan ◽  
Swarnali Islam ◽  
Md. Sohel Rana
Keyword(s):  
Drug Release ◽  
Promising Result ◽  
Release Kinetics ◽  
Type Ii Diabetes Mellitus ◽  
Solvent Evaporation ◽  
Ftir Studies ◽  
Evaporation Technique ◽  
Model Drug

The present study has been performed to microencapsulate the antidiabetic drug of Vildagliptin to get sustained release of drug. The attempt of this study was to formulate and evaluate the Vildagliptin loaded microspheres by emulsion solvent evaporation technique using different polymers like Eudragit RL100, Eudragit RS100, Ethyl cellulose, and Methocel K100M. In vitro dissolution studies were carried out in 0.1 N HCl for 8 hours according to USP paddle method. The maximum and minimum drug release were observed as 92.5% and 68.5% from microspheres, respectively, after 8 hours. Release kinetics were studied in different mathematical release models to find out the linear relationship and release rate of drug. The SEM, DSC, and FTIR studies have been done to confirm good spheres and smooth surface as well as interaction along with drug and polymer. In this experiment, it is difficult to explain the exact mechanism of drug release. But the drug might be released by both diffusion and erosion as the correlation coefficient (R2) best fitted with Korsmeyer model and release exponent (n) was 0.45–0.89. At last it can be concluded that all in vitro and in vivo experiments exhibited promising result to treat type II diabetes mellitus with Vildagliptin microspheres.

scholarly journals Synthesis, Degradation, Biocompatibility and Drug Release Studies of Bis 2-Hydroxy Ethyl Terephthalate-based Poly(Mannitol-Citric-Sebacate) Ester

2016 ◽  
Vol 1 (1) ◽  
pp. 9-16
Author(s):  
Athira K Sunil ◽  
Sarkar K ◽  
Kaushik Chatterjee
Keyword(s):  
Drug Release ◽  
Drug Carrier ◽  
Condensation Process ◽  
Burst Release ◽  
Release Studies ◽  
Biodegradable Poly ◽  
Model Drug ◽  
Melt Condensation

Bis 2-Hydroxy Ethyl Terephthalate-based biodegradable poly(mannitol-citric-sebacate) has been synthesized by catalyst-free melt condensation process using two different diacids and Bis 2-Hydroxy Ethyl Terephthalate with D-mannitol as monomers having a potential to be metabolized in vivo. The biocompatibility of the polymer, Bis 2-Hydroxy Ethyl Terephthalate-poly(mannitol-citric-sebacate) has been tested using human primary stromal cells. In vitro degradation of Bis 2-Hydroxy Ethyl Terephthalate-poly(mannitol-citric-sebacate) polymer in Phosphate Buffered Saline solution carried out at physiological conditions indicates that the degradation goes to completion after 23 days. The usage of Bis 2-Hydroxy Ethyl Terephthalate-poly(mannitol-citric-sebacate) polymer as a drug carrier has been analyzed by doping the polymer with Doxorubicin model drug and the release rate has been studied by mass loss over time. The cumulative drug-release profiles exhibit a biphasic release with an initial burst release and cumulative 100 percent release within 14 days.

Sign in / Sign up

Export Citation Format

Share Document