scholarly journals High Adhesion and Increased Cell Death Contribute to Strong Biofilm Formation in Klebsiella pneumoniae

Pathogens ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 277
Author(s):  
Siddhi Desai ◽  
Kinjal Sanghrajka ◽  
Devarshi Gajjar
Keyword(s):  
Cell Death ◽  
Klebsiella Pneumoniae ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Extracellular Dna ◽  
Confocal Laser ◽  
Bacterial Cells ◽  
High Adhesion ◽  
Biofilm Matrix

Klebsiella pneumoniae (Kp), is a frequent cause of hospital and community-acquired infections and WHO had declared it as a “priority pathogen”. Biofilm is a major virulence factor of Kp and yet the mechanism of strong biofilm formation in Kp is unclear. A key objective of the present study is to investigate the differences between strong and weak biofilms formed by clinical isolates of Kp on various catheters and in different media conditions and to identify constituents contributing to strong biofilm formation. Quantification of matrix components (extracellular DNA (eDNA), protein, exopolysaccharides (EPS), and bacterial cells), confocal laser scanning microscopy (CLSM), field emission gun scanning electron microscopy (FEG-SEM) and flow-cytometry analysis were performed to compare strong and weak biofilm matrix. Our results suggest increased biofilm formation on latex catheters compared to silicone and silicone-coated latex catheters. Higher amounts of eDNA, protein, EPS, and dead cells were observed in the strong biofilm of Kp. High adhesion capacity and cell death seem to play a major role in formation of strong Kp biofilms. The enhanced eDNA, EPS, and protein in the biofilm matrix appear as a consequence of increased cell death.

scholarly journals The exopolysaccharide–eDNA interaction modulates 3D architecture of Bacillus subtilis biofilm

2020 ◽  
Author(s):  
Na Peng ◽  
Peng Cai ◽  
Monika Mortimer ◽  
Yichao Wu ◽  
Chunhui Gao ◽  
...  
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Extracellular Dna ◽  
Titration Calorimetry ◽  
Confocal Laser ◽  
Physical Interaction ◽  
Matrix Components ◽  
Biofilm Development ◽  
Early Phases

Abstract Background Bacterial biofilms are a surface-adherent microbial community in which individual cells are surrounded by a self-produced extracellular matrix of polysaccharide, extracellular DNA (eDNA) and proteins. Interactions among matrix components within the biofilms are responsible for creating an adaptable structure during biofilm development. However, it is unclear how the interaction among matrix components contributes to the construction of the three-dimensional (3D) biofilm architecture. Results DNase I treatment could significantly inhibit B. subtilis biofilm formation in early phases. Confocal laser scanning microscopy (CLSM) and image analysis revealed that eDNA was cooperative with exopolysaccharide (EPS) in early stages of B. subtilis biofilm development, while EPS played a major structural role in the later stages. In addition, deletion of EPS production gene epsG in B. subtilis SBE1 resulted in loss of the interaction between EPS and eDNA, and reduction of biofilm biomass in pellicles at air-liquid interface. The physical interaction between these two essential biofilm matrix components was confirmed by isothermal titration calorimetry (ITC). Conclusions The biofilm 3D structures become interconnected through surrounding eDNA and EPS. eDNA interacts with EPS in the early phases of biofilm development, while EPS mainly participates in the maturation of biofilm. The findings of this study provide better understanding of the role of interaction between eDNA and EPS in shaping the biofilm 3D matrix structure and biofilm formation.

scholarly journals Subinhibitory Concentrations of Mupirocin Stimulate Staphylococcus aureus Biofilm Formation by Upregulating cidA

2020 ◽  
Vol 64 (3) ◽  
Author(s):  
Ye Jin ◽  
Yinjuan Guo ◽  
Qing Zhan ◽  
Yongpeng Shang ◽  
Di Qu ◽  
...  
Keyword(s):  
Staphylococcus Aureus ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Multidrug Resistant ◽  
Laser Scanning Microscopy ◽  
Extracellular Dna ◽  
Confocal Laser ◽  
Content Type ◽  
Subinhibitory Concentrations ◽  
Biofilm Development

ABSTRACT Previous studies have shown that the administration of antibiotics at subinhibitory concentrations stimulates biofilm formation by the majority of multidrug-resistant Staphylococcus aureus (MRSA) strains. Here, we investigated the effect of subinhibitory concentrations of mupirocin on biofilm formation by the community-associated (CA) mupirocin-sensitive MRSA strain USA300 and the highly mupirocin-resistant clinical S. aureus SA01 to SA05 isolates. We found that mupirocin increased the ability of MRSA cells to attach to surfaces and form biofilms. Confocal laser scanning microscopy (CLSM) demonstrated that mupirocin treatment promoted thicker biofilm formation, which also correlated with the production of extracellular DNA (eDNA). Furthermore, quantitative real-time PCR (RT-qPCR) results revealed that this effect was largely due to the involvement of holin-like and antiholin-like proteins (encoded by the cidA gene), which are responsible for modulating cell death and lysis during biofilm development. We found that cidA expression levels significantly increased by 6.05- to 35.52-fold (P < 0.01) after mupirocin administration. We generated a cidA-deficient mutant of the USA300 S. aureus strain. Exposure of the ΔcidA mutant to mupirocin did not result in thicker biofilm formation than that in the parent strain. We therefore hypothesize that the mupirocin-induced stimulation of S. aureus biofilm formation may involve the upregulation of cidA.

scholarly journals Role of Exopolysaccharides in Pseudomonas aeruginosa Biofilm Formation and Architecture

2011 ◽  
Vol 77 (15) ◽  
pp. 5238-5246 ◽  
Author(s):  
Aamir Ghafoor ◽  
Iain D. Hay ◽  
Bernd H. A. Rehm
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Bacterial Biofilm ◽  
Laser Scanning Microscopy ◽  
Extracellular Dna ◽  
Confocal Laser ◽  
Content Type ◽  
Biofilm Architecture

ABSTRACTPseudomonas aeruginosais an opportunistic human pathogen and has been established as a model organism to study bacterial biofilm formation. At least three exopolysaccharides (alginate, Psl, and Pel) contribute to the formation of biofilms in this organism. Here mutants deficient in the production of one or more of these polysaccharides were generated to investigate how these polymers interactively contribute to biofilm formation. Confocal laser scanning microscopy of biofilms formed in flow chambers showed that mutants deficient in alginate biosynthesis developed biofilms with a decreased proportion of viable cells than alginate-producing strains, indicating a role of alginate in viability of cells in biofilms. Alginate-deficient mutants showed enhanced extracellular DNA (eDNA)-containing surface structures impacting the biofilm architecture. PAO1 ΔpslAΔalg8overproduced Pel, and eDNA showing meshwork-like structures presumably based on an interaction between both polymers were observed. The formation of characteristic mushroom-like structures required both Psl and alginate, whereas Pel appeared to play a role in biofilm cell density and/or the compactness of the biofilm. Mutants producing only alginate, i.e., mutants deficient in both Psl and Pel production, lost their ability to form biofilms. A lack of Psl enhanced the production of Pel, and the absence of Pel enhanced the production of alginate. The function of Psl in attachment was independent of alginate and Pel. A 30% decrease in Psl promoter activity in the alginate-overproducing MucA-negative mutant PDO300 suggested inverse regulation of both biosynthesis operons. Overall, this study demonstrated that the various exopolysaccharides and eDNA interactively contribute to the biofilm architecture ofP. aeruginosa.

scholarly journals Contribution of alginate and levan production to biofilm formation by Pseudomonas syringae

Microbiology ◽  
2006 ◽  
Vol 152 (10) ◽  
pp. 2909-2918 ◽  
Author(s):  
Heike Laue ◽  
Alexander Schenk ◽  
Hongqiao Li ◽  
Lotte Lambertsen ◽  
Thomas R. Neu ◽  
...  
Keyword(s):  
Spatial Distribution ◽  
Pseudomonas Syringae ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Time Course ◽  
Complex Structure ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Bacterial Cells ◽  
Biofilm Development

Exopolysaccharides (EPSs) play important roles in the attachment of bacterial cells to a surface and/or in building and maintaining the three-dimensional, complex structure of bacterial biofilms. To elucidate the spatial distribution and function of the EPSs levan and alginate during biofilm formation, biofilms of Pseudomonas syringae strains with different EPS patterns were compared. The mucoid strain PG4180.muc, which produces levan and alginate, and its levan- and/or alginate-deficient derivatives all formed biofilms in the wells of microtitre plates and in flow chambers. Confocal laser scanning microscopy with fluorescently labelled lectins was applied to investigate the spatial distribution of levan and an additional as yet unknown EPS in flow-chamber biofilms. Concanavalin A (ConA) bound specifically to levan and accumulated in cell-depleted voids in the centres of microcolonies and in blebs. No binding of ConA was observed in biofilms of the levan-deficient mutants or in wild-type biofilms grown in the absence of sucrose as confirmed by an enzyme-linked lectin-sorbent assay using peroxidase-linked ConA. Time-course studies revealed that expression of the levan-forming enzyme, levansucrase, occurred mainly during early exponential growth of both planktonic and sessile cells. Thus, accumulation of levan in biofilm voids hints to a function as a nutrient storage source for later stages of biofilm development. The presence of a third EPS besides levan and alginate was indicated by binding of the lectin from Naja mossambica to a fibrous structure in biofilms of all P. syringae derivatives. Production of the as yet uncharacterized additional EPS might be more important for biofilm formation than the syntheses of levan and alginate.

scholarly journals The exopolysaccharide–eDNA interaction modulates 3D architecture of Bacillus subtilis biofilm

2020 ◽  
Author(s):  
Na Peng ◽  
Peng Cai ◽  
Monika Mortimer ◽  
Yichao Wu ◽  
Chunhui Gao ◽  
...  
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Extracellular Dna ◽  
Titration Calorimetry ◽  
Confocal Laser ◽  
Physical Interaction ◽  
Matrix Components ◽  
Biofilm Development ◽  
Early Phases

Abstract Background Bacterial biofilms are a surface-adherent microbial community in which individual cells are surrounded by a self-produced extracellular matrix of polysaccharides, extracellular DNA (eDNA) and proteins. Interactions among matrix components within the biofilms are responsible for creating an adaptable structure during biofilm development. However, it is unclear how the interaction among matrix components contributes to the construction of the three-dimensional (3D) biofilm architecture. Results DNase I treatment could significantly inhibit B. subtilis biofilm formation in early phases. Confocal laser scanning microscopy (CLSM) and image analysis revealed that eDNA was cooperative with EPS in early stages of B. subtilis biofilm development, while EPS played a major structural role in the later stages. In addition, deletion of EPS production gene epsG in B. subtilis SBE1 resulted in loss of the interaction between EPS and eDNA, and reduction of biofilm biomass in pellicles at air-liquid interface. The physical interaction between these two essential biofilm matrix components was confirmed by isothermal titration calorimetry (ITC). Conclusions The biofilm 3D structures become interconnected through surrounding eDNA and EPS. eDNA interacts with EPS in the early phases of biofilm development, while EPS mainly participates in the maturation of biofilm. The findings of this study provide better understanding of the role of interaction between eDNA and EPS in shaping the biofilm 3D matrix structure and biofilm formation.

scholarly journals The exopolysaccharide–eDNA interaction modulates 3D architecture of Bacillus subtilis biofilm

2019 ◽  
Author(s):  
Na Peng ◽  
Peng Cai ◽  
Monika Mortimer ◽  
Yichao Wu ◽  
Chunhui Gao ◽  
...  
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Extracellular Dna ◽  
Titration Calorimetry ◽  
Confocal Laser ◽  
Physical Interaction ◽  
Matrix Components ◽  
Biofilm Development ◽  
Early Phases

Abstract Background Bacterial biofilms are a surface-adherent microbial community in which individual cells are surrounded by a self-produced extracellular matrix of polysaccharides, extracellular DNA (eDNA) and proteins. Interactions among matrix components within the biofilms are responsible for creating an adaptable structure during biofilm development. However, it is unclear how the interaction among matrix components contributes to the construction of the three-dimensional (3D) biofilm architecture.Results DNase I treatment could significantly inhibit B. subtilis biofilm formation in early phases. Confocal laser scanning microscopy (CLSM) and image analysis revealed that eDNA was cooperative with EPS in early stages of B. subtilis biofilm development, while EPS played a major structural role in the later stages. In addition, deletion of EPS production gene epsG in B. subtilis SBE1 resulted in loss of the interaction between EPS and eDNA, and reduction of biofilm biomass in pellicles at air-liquid interface. The physical interaction between these two essential biofilm matrix components was confirmed by isothermal titration calorimetry (ITC).Conclusions The biofilm 3D structures become interconnected through surrounding eDNA and EPS. eDNA interacts with EPS in the early phases of biofilm development, while EPS mainly participates in the maturation of biofilm. The findings of this study provide better understanding of the role of interaction between eDNA and EPS in shaping the biofilm 3D matrix structure and biofilm formation.

Confocal and SEM imaging to demonstrate food pathogen- biofilm biocontrol by pyocyanin from Pseudomonas aeruginosa BTRY1

2016 ◽  
Vol 6 (01) ◽  
pp. 5218
Author(s):  
Laxmi Mohandas ◽  
Anju T. R. ◽  
Sarita G. Bhat*
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Antibiofilm Activity ◽  
Opportunistic Pathogens ◽  
Redox Active ◽  
Sem Imaging ◽  
The Impact

An assortment of redox-active phenazine compounds like pyocyanin with their characteristic blue-green colour are synthesized by Pseudomonas aeruginosa, Gram-negative opportunistic pathogens, which are also considered one of the most commercially valuable microorganisms. In this study, pyocyanin from Pseudomonas aeruginosa BTRY1 from food sample was assessed for its antibiofilm activity by micro titer plate assay against strong biofilm producers belonging to the genera Bacillus, Staphylococcus, Brevibacterium and Micrococcus. Pyocyanin inhibited biofilm activity in very minute concentrations. This was also confirmed by Scanning Electron Microscopy (SEM) and Confocal Laser Scanning Microscopy (CLSM). Both SEM and CLSM helped to visualize the biocontrol of biofilm formation by eight pathogens. The imaging and quantification by CLSM also established the impact of pyocyanin on biofilm-biocontrol mainly in the food industry.

scholarly journals The PTS Components in Klebsiella pneumoniae Affect Bacterial Capsular Polysaccharide Production and Macrophage Phagocytosis Resistance

2021 ◽  
Vol 9 (2) ◽  
pp. 335
Author(s):  
Novaria Sari Dewi Panjaitan ◽  
Yu-Tze Horng ◽  
Chih-Ching Chien ◽  
Hung-Chi Yang ◽  
Ren-In You ◽  
...  
Keyword(s):  
Survival Rate ◽  
Klebsiella Pneumoniae ◽  
Laser Scanning ◽  
Bacterial Resistance ◽  
Capsular Polysaccharide ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Intracellular Bacteria ◽  
Wild Type ◽  
Macrophage Phagocytosis

Capsular polysaccharide (CPS) is a crucial virulence factor for Klebsiella pneumoniae infection. We demonstrated an association of CPS production with two phosphoenolpyruvate:carbohydrate phosphotransferase systems (PTSs). Deficiency of crr, encoding enzyme IIA of PTS, in K. pneumoniae enhanced the transcriptional activities of galF, wzi and gnd, which are in the cps gene cluster, leading to high CPS production. A crr mutant exhibited a higher survival rate in 1% hydrogen peroxide than the wild-type. The crr mutant showed less sensitivity to engulfment by macrophage (RAW 264.7) than the wild-type by observing the intracellular bacteria using confocal laser scanning microscopy (CLSM) and by calculating the colony-forming units (CFU) of intracellular bacteria. After long-term incubation, the survival rate of the intracellular crr mutant was higher than that of the wild-type. Deficiency of crr enhanced the transcriptional activities of etcABC which encodes another putative enzyme II complex of a PTS. Deletion of etcABC in the crr mutant reduced CPS production and the transcriptional activities of galF compared to those of the crr mutant. These results indicated that one PTS component, Crr, represses CPS production by repressing another PTS component, EtcABC, in K. pneumoniae. In addition, PTS plays a role in bacterial resistance to macrophage phagocytosis.

scholarly journals Bacterial lipopolysaccharides variably modulate in vitro biofilm formation of Candida species

2010 ◽  
Vol 59 (10) ◽  
pp. 1225-1234 ◽  
Author(s):  
H. M. H. N. Bandara ◽  
O. L. T. Lam ◽  
R. M. Watt ◽  
L. J. Jin ◽  
L. P. Samaranayake
Keyword(s):  
Biofilm Formation ◽  
Laser Scanning ◽  
Significant Inhibition ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Dependent Manner ◽  
Bacterial Lipopolysaccharides ◽  
Species Specific ◽  
Biofilm Development

The objective of this study was to evaluate the effect of the bacterial endotoxin LPS on Candida biofilm formation in vitro. The effect of the LPS of Pseudomonas aeruginosa, Klebsiella pneumoniae, Serratia marcescens and Salmonella typhimurium on six different species of Candida, comprising Candida albicans ATCC 90028, Candida glabrata ATCC 90030, Candida krusei ATCC 6258, Candida tropicalis ATCC 13803, Candida parapsilosis ATCC 22019 and Candida dubliniensis MYA 646, was studied using a standard biofilm assay. The metabolic activity of in vitro Candida biofilms treated with LPS at 90 min, 24 h and 48 h was quantified by XTT reduction assay. Viable biofilm-forming cells were qualitatively analysed using confocal laser scanning microscopy (CLSM), while scanning electron microscopy (SEM) was employed to visualize the biofilm structure. Initially, adhesion of C. albicans was significantly stimulated by Pseudomonas and Klebsiella LPS. A significant inhibition of Candida adhesion was noted for the following combinations: C. glabrata with Pseudomonas LPS, C. tropicalis with Serratia LPS, and C. glabrata, C. parapsilosis or C. dubliniensis with Salmonella LPS (P<0.05). After 24 h of incubation, a significant stimulation of initial colonization was noted for the following combinations: C. albicans/C. glabrata with Klebsiella LPS, C. glabrata/C. tropicalis/C. krusei with Salmonella LPS. In contrast, a significant inhibition of biofilm formation was observed in C. glabrata/C. dubliniensis/C. krusei with Pseudomonas LPS, C. krusei with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. parapsilosis/C. dubliniensis /C. krusei with Salmonella LPS (P<0.05). On further incubation for 48 h, a significant enhancement of biofilm maturation was noted for the following combinations: C. glabrata/C. tropicalis with Serratia LPS, C. dubliniensis with Klebsiella LPS and C. glabrata with Salmonella LPS, and a significant retardation was noted for C. parapsilosis/C. dubliniensis/C. krusei with Pseudomonas LPS, C. tropicalis with Serratia LPS, C. glabrata/C. parapsilosis/C. dubliniensis with Klebsiella LPS and C. dubliniensis with Salmonella LPS (P<0.05). These findings were confirmed by SEM and CLSM analyses. In general, the inhibition of the biofilm development of LPS-treated Candida spp. was accompanied by a scanty architecture with a reduced numbers of cells compared with the profuse and densely colonized control biofilms. These data are indicative that bacterial LPSs modulate in vitro Candida biofilm formation in a species-specific and time-dependent manner. The clinical and the biological relevance of these findings have yet to be explored.

scholarly journals Using micro-patterned surfaces to inhibit settlement and biofilm formation by Bacillus subtilis

2017 ◽  
Vol 63 (7) ◽  
pp. 608-620 ◽  
Author(s):  
Siyuan Chang ◽  
Xiaodong Chen ◽  
Shuo Jiang ◽  
Jinchun Chen ◽  
Lin Shi
Keyword(s):  
Bacillus Subtilis ◽  
Biofilm Formation ◽  
Laser Scanning ◽  
Laser Scanning Microscopy ◽  
Confocal Laser ◽  
Patterned Surfaces ◽  
Heat Transfer Efficiency ◽  
Treated Sewage ◽  
Different Characteristics ◽  
Precision Balance

Biofilm is a biological complex caused by bacteria attachment to the substrates and their subsequent reproduction and secretion. This phenomenon reduces heat transfer efficiency and causes significant losses in treated sewage heat-recovering systems. This paper describes a physical approach to inhibit bacteria settlement and biofilm formation by Bacillus subtilis, which is the dominant species in treated sewage. Here, micro-patterned surfaces with different characteristics (stripe and cube) and dimensions (1–100 μm) were fabricated as surfaces of interest. Model sewage was prepared and a rotating coupon device was used to form the biofilms. Precision balance, scanning electron microscopy, and confocal laser scanning microscopy (CLSM) were employed to investigate the inhibitory effects and the mechanisms of the biofilm–surface interactions. The results have shown that surfaces with small pattern sizes (1 and 2 μm) all reduced biofilm formation significantly. Interestingly, the CLSM images showed that the surfaces do not play a role in “killing” the bacteria. These findings are useful for future development of new process surfaces on which bacteria settlement and biofilm formation can be inhibited or minimized.

Sign in / Sign up

Export Citation Format

Share Document