scholarly journals Facile and Green Synthesis of Graphene-Based Conductive Adhesives via Liquid Exfoliation Process

Nanomaterials ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 38 ◽  
Author(s):  
Jhao-Yi Wu ◽  
Yi-Chin Lai ◽  
Chien-Liang Chang ◽  
Wu-Ching Hung ◽  
Hsiao-Min Wu ◽  
...  
Keyword(s):  
Electronic Conductivity ◽  
Superior Performance ◽  
Structural Defects ◽  
Potential Candidate ◽  
Conductive Adhesives ◽  
Graphene Layers ◽  
Liquid Exfoliation ◽  
Transmission Electron ◽  
Few Layer Graphene ◽  
G Ratio

In this study, we report a facile and green process to synthesize high-quality and few-layer graphene (FLG) derived from graphite via a liquid exfoliation process. The corresponding characterizations of FLG, such as scanning electron microscopy (SEM), transmission electron microscope (TEM), atomic force microscopy (AFM) and Raman spectroscopy, were carried out. The results of SEM show that the lateral size of as-synthesized FLG is 1–5 μm. The results of TEM and AFM indicate more than 80% of graphene layers is <10 layers. The most surprising thing is that D/G ratio of graphite and FLG are 0.15 and 0.19, respectively. The result of the similar D/G ratio demonstrates that little structural defects were created via the liquid exfoliation process. Electronic conductivity tests and resistance of composite film, in terms of different contents of graphite/polyvinylidene difluoride (PVDF) and FLG/PVDF, were carried out. Dramatically, the FLG/PVDF composite demonstrates superior performance compared to the graphite/PVDF composite at the same ratio. In addition, the post-sintering process plays an important role in improving electronic conductivity by 85%. The composition-optimized FLG/PVDF thin film exhibits 81.9 S·cm−1. These results indicate that the developed FLG/PVDF composite adhesives could be a potential candidate for conductive adhesive applications.

scholarly journals Protein-assisted scalable mechanochemical exfoliation of few-layer biocompatible graphene nanosheets

2021 ◽  
Vol 8 (3) ◽  
Author(s):  
Deepak-George Thomas ◽  
Steven De-Alwis ◽  
Shalabh Gupta ◽  
Vitalij K. Pecharsky ◽  
Deyny Mendivelso-Perez ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Nanosheets ◽  
Cost Effective ◽  
X Ray Diffraction ◽  
Cytotoxic Effects ◽  
Graphene Layers ◽  
Exfoliated Graphene ◽  
Transmission Electron ◽  
Few Layer Graphene

A facile method to produce few-layer graphene (FLG) nanosheets is developed using protein-assisted mechanical exfoliation. The predominant shear forces that are generated in a planetary ball mill facilitate the exfoliation of graphene layers from graphite flakes. The process employs a commonly known protein, bovine serum albumin (BSA), which not only acts as an effective exfoliation agent but also provides stability by preventing restacking of the graphene layers. The latter is demonstrated by the excellent long-term dispersibility of exfoliated graphene in an aqueous BSA solution, which exemplifies a common biological medium. The development of such potentially scalable and toxin-free methods is critical for producing cost-effective biocompatible graphene, enabling numerous possible biomedical and biological applications. A methodical study was performed to identify the effect of time and varying concentrations of BSA towards graphene exfoliation. The fabricated product has been characterized using Raman spectroscopy, powder X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The BSA-FLG dispersion was then placed in media containing Astrocyte cells to check for cytotoxicity. It was found that lower concentrations of BSA-FLG dispersion had only minute cytotoxic effects on the Astrocyte cells.

scholarly journals Estimation of Number of Graphene Layers Using Different Methods: A Focused Review

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4590
Author(s):  
Vineet Kumar ◽  
Anuj Kumar ◽  
Dong-Joo Lee ◽  
Sang-Shin Park
Keyword(s):  
Electron Microscopy ◽  
Raman Spectra ◽  
Monolayer Graphene ◽  
Multilayer Graphene ◽  
Characterization Methods ◽  
Graphene Layers ◽  
Force Microscopy ◽  
Stacking Order ◽  
Transmission Electron ◽  
Few Layer Graphene

Graphene, a two-dimensional nanosheet, is composed of carbon species (sp2 hybridized carbon atoms) and is the center of attention for researchers due to its extraordinary physicochemical (e.g., optical transparency, electrical, thermal conductivity, and mechanical) properties. Graphene can be synthesized using top-down or bottom-up approaches and is used in the electronics and medical (e.g., drug delivery, tissue engineering, biosensors) fields as well as in photovoltaic systems. However, the mass production of graphene and the means of transferring monolayer graphene for commercial purposes are still under investigation. When graphene layers are stacked as flakes, they have substantial impacts on the properties of graphene-based materials, and the layering of graphene obtained using different approaches varies. The determination of number of graphene layers is very important since the properties exhibited by monolayer graphene decrease as the number of graphene layer per flake increases to 5 as few-layer graphene, 10 as multilayer graphene, and more than 10 layers, when it behaves like bulk graphite. Thus, this review summarizes graphene developments and production. In addition, the efficacies of determining the number of graphene layers using various characterization methods (e.g., transmission electron microscopy (TEM), atomic force microscopy (AFM), scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectra and mapping, and spin hall effect-based methods) are compared. Among these methods, TEM and Raman spectra were found to be most promising to determine number of graphene layers and their stacking order.

Transmission electron microscopy of composite materials

1988 ◽  
Vol 46 ◽  
pp. 1012-1015
Author(s):  
K.P.D. Lagerlof
Keyword(s):  
Composite Materials ◽  
Physical Properties ◽  
Structural Defects ◽  
Structural Composites ◽  
Multiphase Materials ◽  
Structural Reinforcement ◽  
Transmission Electron ◽  
Reinforced Fiber ◽  
Particulate Reinforced Composites ◽  
Definition Of

Although most materials contain more than one phase, and thus are multiphase materials, the definition of composite materials is commonly used to describe those materials containing more than one phase deliberately added to obtain certain desired physical properties. Composite materials are often classified according to their application, i.e. structural composites and electronic composites, but may also be classified according to the type of compounds making up the composite, i.e. metal/ceramic, ceramic/ceramie and metal/semiconductor composites. For structural composites it is also common to refer to the type of structural reinforcement; whisker-reinforced, fiber-reinforced, or particulate reinforced composites [1-4].For all types of composite materials, it is of fundamental importance to understand the relationship between the microstructure and the observed physical properties, and it is therefore vital to properly characterize the microstructure. The interfaces separating the different phases comprising the composite are of particular interest to understand. In structural composites the interface is often the weakest part, where fracture will nucleate, and in electronic composites structural defects at or near the interface will affect the critical electronic properties.

In situ TEM Studies of agglomeration of sub-nanometer Ru layers in Ru/C multilayers

1992 ◽  
Vol 50 (1) ◽  
pp. 256-257
Author(s):  
Tai D. Nguyen ◽  
Ronald Gronsky ◽  
Jeffrey B. Kortright
Keyword(s):  
Layered Structure ◽  
Driving Force ◽  
High Energy ◽  
Superior Performance ◽  
In Situ Tem ◽  
Rayleigh Instability ◽  
Practical Applications ◽  
Transmission Electron ◽  
Diffraction Patterns

Nanometer period Ru/C multilayers are one of the prime candidates for normal incident reflecting mirrors at wavelengths < 10 nm. Superior performance, which requires uniform layers and smooth interfaces, and high stability of the layered structure under thermal loadings are some of the demands in practical applications. Previous studies however show that the Ru layers in the 2 nm period Ru/C multilayer agglomerate upon moderate annealing, and the layered structure is no longer retained. This agglomeration and crystallization of the Ru layers upon annealing to form almost spherical crystallites is a result of the reduction of surface or interfacial energy from die amorphous high energy non-equilibrium state of the as-prepared sample dirough diffusive arrangements of the atoms. Proposed models for mechanism of thin film agglomeration include one analogous to Rayleigh instability, and grain boundary grooving in polycrystalline films. These models however are not necessarily appropriate to explain for the agglomeration in the sub-nanometer amorphous Ru layers in Ru/C multilayers. The Ru-C phase diagram shows a wide miscible gap, which indicates the preference of phase separation between these two materials and provides an additional driving force for agglomeration. In this paper, we study the evolution of the microstructures and layered structure via in-situ Transmission Electron Microscopy (TEM), and attempt to determine the order of occurence of agglomeration and crystallization in the Ru layers by observing the diffraction patterns.

Dechannealing Study of Nanocrystalline Si:H Layers Produced by High Dose Hydrogen Irradiation of Silicon Crystals

1998 ◽  
Vol 536 ◽  
Author(s):  
V. P. Popov ◽  
A. K. Gutakovsky ◽  
I. V. Antonova ◽  
K. S. Zhuravlev ◽  
E. V. Spesivtsev ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Rutherford Backscattering Spectrometry ◽  
Nanocrystalline Structure ◽  
Structural Defects ◽  
High Dose ◽  
Silicon Crystals ◽  
Strong Energy ◽  
Transmission Electron ◽  
Hydrogen Implantation

AbstractA study of Si:H layers formed by high dose hydrogen implantation (up to 3x107cm-2) using pulsed beams with mean currents up 40 mA/cm2 was carried out in the present work. The Rutherford backscattering spectrometry (RBS), channeling of He ions, and transmission electron microscopy (TEM) were used to study the implanted silicon, and to identify the structural defects (a-Si islands and nanocrystallites). Implantation regimes used in this work lead to creation of the layers, which contain hydrogen concentrations higher than 15 at.% as well as the high defect concentrations. As a result, the nano- and microcavities that are created in the silicon fill with hydrogen. Annealing of this silicon removes the radiation defects and leads to a nanocrystalline structure of implanted layer. A strong energy dependence of dechanneling, connected with formation of quasi nanocrystallites, which have mutual small angle disorientation (<1.50), was found after moderate annealing in the range 200-500°C. The nanocrystalline regions are in the range of 2-4 nm were estimated on the basis of the suggested dechanneling model and transmission electron microscopy (TEM) measurements. Correlation between spectroscopic ellipsometry, visible photoluminescence, and sizes of nanocrystallites in hydrogenated nc-Si:H is observed.

Towards 3D image-based nanocrystallography by means of transmission electron goniometry

2004 ◽  
Vol 839 ◽  
Author(s):  
Peter Moeck ◽  
Wentao Qin ◽  
Philip B. Fraundorf
Keyword(s):  
Lattice Structure ◽  
Three Dimensions ◽  
Structural Defects ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
Z Contrast ◽  
Individual Nanoparticles ◽  
Nanocrystal Model ◽  
The Ideal

ABSTRACTIt is well known that the crystallographic phase and morphology of many materials changes with the crystal size in the tens of nanometer range and that many nanocrystals possess structural defects in excess of their equilibrium levels. A need to determine the ideal and real structure of individual nanoparticles, therefore, arises. High-resolution phase-contrast transmission electron microscopy (TEM) and atomic resolution Z-contrast scanning TEM (STEM) when combined with transmission electron goniometry offer the opportunity of develop dedicated methods for the crystallographic characterization of nanoparticles in three dimensions. This paper describes tilt strategies for taking data from individual nanocrystals “as found”, so as to provide information on their lattice structure and orientation, as well as on the structure and orientation of their surfaces and structural defects. Internet based java applets that facilitate the application of this technique for cubic crystals with calibrated tilt-rotation and double-tilt holders are mentioned briefly. The enhanced viability of image-based nanocrystallography in future aberration-corrected TEMs and STEMs is illustrated on a nanocrystal model system.

Precise engineering of silver loaded polyvinyl alcohol nanogels for wound nursing care systems in operation room

2021 ◽  
Vol 11 (1) ◽  
pp. 85-92
Author(s):  
Lin Cai
Keyword(s):  
Polyvinyl Alcohol ◽  
Potential Candidate ◽  
Drug Release Profile ◽  
Transmission Electron ◽  
Care Systems ◽  
Rapid Healing ◽  
Healing Of Skin Wounds ◽  
Mediated Reduction ◽  
Silver Nitrate Solutions

This study was designed to establish the composition of wound bandages based on silver nanoparticle (AgNP)loaded polyvinyl alcohol (PVA) nanogels. The AgNP nanogel (Ag-nGel) was fabricated by the fructose-mediated reduction of silver nitrate solutions within the PVA matrix. The influence of different experimental limitations on PVA nanogel formations were examined. The nanogel particle sizes were evaluated by transmission electron microscopy and determined to range from ∼10–50 nm. Additionally, glycerol were added to the Ag-nGels, and the resulting compositions (Ag-nGel-Glu) were coated on cotton fabrics to generate the wound bandaging composite. The cumulative drug release profile of the silver from the bandage was found to be ∼38% of the total loading after two days. Additionally, antibacterial efficacy was developed for gram positive and negative microorganisms. Moreover, we examined in vivo healing of skin wounds formed in mouse models over 21 days. In contrast to the untreated wounds, rapid healing was perceived in the Ag-nGel-Glu-treated wound with less damaging. These findings indicate that Ag-nGel-Glu-based bandaging materials could be a potential candidate for wound bandaging applications in the future.

scholarly journals Exploring the Capability of HAADF-STEM Techniques to Characterize Graphene Distribution in Nanocomposites by Simulations

2018 ◽  
Vol 2018 ◽  
pp. 1-12
Author(s):  
N. Baladés ◽  
D. L. Sales ◽  
M. Herrera ◽  
A. M. Raya ◽  
J. C. Hernández-Garrido ◽  
...  
Keyword(s):  
Electron Tomography ◽  
Carbon Matrix ◽  
Reconstruction Algorithm ◽  
Dark Field ◽  
Graphene Layers ◽  
Transmission Electron ◽  
Dispersion Degree ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

This paper explores the capability of scanning transmission electron microscopy (STEM) techniques in determining the dispersion degree of graphene layers within the carbon matrix by using simulated high-angle annular dark-field (HAADF) images. Results ensure that unmarked graphene layers are only detectable if their orientation is parallel to the microscope beam. Additionally, gold-marked graphene layers allow evaluating the dispersion degree in structural composites. Moreover, electron tomography has been demonstrated to provide truthfully 3D distribution of the graphene sheets inside the matrix when an appropriate reconstruction algorithm and 2D projections including channelling effect are used.

scholarly journals Growth of Ordered Graphene Ribbons by Sublimation Epitaxy

Crystals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 449
Author(s):  
Shuxian Cai ◽  
Xingfang Liu ◽  
Xin Zheng ◽  
Zhonghua Liu
Keyword(s):  
Substrate Surface ◽  
Graphene Film ◽  
Graphene Ribbon ◽  
High Quality ◽  
Graphene Layers ◽  
Force Microscopy ◽  
Layer Graphene ◽  
Micro Raman Spectroscopy ◽  
Atomic Force ◽  
Few Layer Graphene

Ordered graphene ribbons were grown on the surface of 4° off-axis 4H-SiC wafers by sublimation epitaxy, and characterized by using scanning electron microscopy (SEM), atomic force microscopy (AFM) and micro-Raman spectroscopy (μ-Raman). SEM showed that there were gray and dark ribbons on the substrate surface, and AFM further revealed that these ordered graphene ribbons had clear stepped morphologies due to surface step-bunching. It was shown by μ-Raman that the numbers of graphene layers of these two types of regions were different. The gray region was composed of mono- or bilayer ordered graphene ribbon, while the dark region was of tri- or few-layer ribbon. Meanwhile, ribbons were all homogeneous and had a width up to 40 μm and a length up to 1000 μm, without micro defects such as grain boundaries, ridges, or mono- and few-layer graphene mixtures. The results of this study are useful for optimized growth of high-quality graphene film on silicon carbide crystal.

Sign in / Sign up

Export Citation Format

Share Document