scholarly journals Microstructure and Mechanical Properties of Nano-Carbon Reinforced Titanium Matrix/Hydroxyapatite Biocomposites Prepared by Spark Plasma Sintering

Nanomaterials ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 729 ◽  
Author(s):  
Feng Li ◽  
Xiaosong Jiang ◽  
Zhenyi Shao ◽  
Degui Zhu ◽  
Zhiping Luo

Nano-carbon reinforced titanium matrix/hydroxyapatite (HA) biocomposites were successfully prepared by spark plasma sintering (SPS). The microstructure, mechanical properties, biocompatibility, and the relationship between microstructure and properties of biocomposites were systematically investigated. Results showed there are some new phases in sintered composites, such as β-Ti, TiO3, ZrO2, etc. Moreover, a small amount of Ti17P10, CaTiO3, Ca3(PO4)2 were also detected. The reaction that may occur during the preparation process is suppressed to some extent, which is because that the addition of second phases can prevent the direct contact of titanium with HA and reduce the contact areas. Transmission electron microscope (TEM) analysis proved the existence of elemental diffusion and chemical reactions in sintered composites. Compared with results of composites prepared by hot-pressed sintering before, mechanical properties (microhardness, compressive strength, and shear strength) of 0.5-GNFs composites prepared by SPS were increased by about 2.8, 4.8, and 4.1 times, respectively. The better mechanical properties of 0.5-GNFs composite in nano-carbon reinforced composites are mainly due to the lower degree of agglomeration of tubular carbon nanotubes (CNTs) compared to lamellar graphene nanoflakes (GNFs). Moreover, the strengthening and toughening mechanisms of nano-carbon reinforced titanium alloy/HA biocomposite prepared by spark plasma sintering (SPS) mainly included second phase strengthening, grain refinement strengthening, solution strengthening, graphene extraction, carbon nanotubes bridging, crack tail stripping, etc. In addition, in vitro bioactivity test revealed that the addition of nano-carbon was beneficial to promote the adhesion and proliferation of cells on the surface of titanium alloy/HA composite, because nano-carbon can enhance the formation of mineralized necks in the composites after transplantation, stimulate biomineralization and promote bone regeneration.

JOM ◽  
2018 ◽  
Vol 71 (2) ◽  
pp. 567-584 ◽  
Author(s):  
Avwerosuoghene Moses Okoro ◽  
Senzeni Sipho Lephuthing ◽  
Samuel Ranti Oke ◽  
Oluwasegun Eso Falodun ◽  
Mary Ajimegoh Awotunde ◽  
...  

2018 ◽  
Vol 913 ◽  
pp. 466-472
Author(s):  
Ye Meng ◽  
Wen Jiang Qiang ◽  
Jing Qin Pang

Laminated xCNTs-HAP/yCNTs-HAP ceramic composites were consolidated using a spark plasma sintering(SPS) technique at SPS temperature 900°C, pressure 40MPa and holding time 5min. The effect of carbon nanotubes content and thickness of each layer on mechanical properties of the composites was investigated. It was demonstrated that the stratified structure improvedthe flexural strength obviously. All the flexural strength of laminar compositewashigher than that of single CNTs-HAP ceramic, up to 112.4MPa. Since the matrix of each layer wereHAP, the difference liesonly in the content of carbon nanotubes, thus avoiding the common problem of the interlayer bonding in other layered composites with different materials. In order to characterize the toughness of the layered composite, the stress-strain curve was compared showingthat the existence of the stratified structure improved the stress-strain obviously.


Sign in / Sign up

Export Citation Format

Share Document