scholarly journals Effective Mechanical Properties and Thickness Determination of Boron Nitride Nanosheets Using Molecular Dynamics Simulation

Nanomaterials ◽  
2018 ◽  
Vol 8 (7) ◽  
pp. 546 ◽  
Author(s):  
Venkatesh Vijayaraghavan ◽  
Liangchi Zhang

Research in boron nitride nanosheets (BNNS) has evoked significant interest in the field of nano-electronics, nanoelectromechanical (NEMS) devices, and nanocomposites due to its excellent physical and chemical properties. Despite this, there has been no reliable data on the effective mechanical properties of BNNS, with the literature reporting a wide scatter of strength data for the same material. To address this challenge, this article presents a comprehensive analysis on the effect of vital factors which can result in variations of the effective mechanical properties of BNNS. Additionally, the article also presents the computation of the correct wall thickness of BNNS from elastic theory equations, which is an important descriptor for any research to determine the mechanical properties of BNNS. It was predicted that the correct thickness of BNNS should be 0.106 nm and the effective Young’s modulus to be 2.75 TPa. It is anticipated that the findings from this study could provide valuable insights on the true mechanical properties of BNNS that could assist in the design and development of efficient BN-based NEMS devices, nanosensors, and nanocomposites.

This research concentrates on the determination of feasibility of using Eggshell powder and Fly ash as alternate materials of Cement in concrete and their effects on mechanical properties of concrete. The production of cement produces Green house gasses into the atmosphere which pollute the Environment .To overcome this problem we are replacing cement with eggshell powder and fly ash. As the eggshell powder and fly ash are waste material they can available easily and their cost is also very low compared to the production of same amount of cement. The chemical composition of Eggshells is roughly 95% similar to that of cement, which has more calcium content; both physical and chemical properties of cement are almost similar to that of Fly ash. By replacing cement with these two materials in the concrete we can reduce the cost of production of cement and can safeguard the environment. The specimens were prepared and tested for compressive strength, Slump cone test, splitting tensile strength, Modulus of elasticity and flexural strength at 7,14, 28 & 56 days. Results show that the strength of conventional concrete is less than compared to the concrete prepared by replacing the cement with eggshell powder and fly ash.


Author(s):  
O.S. Bezuglova ◽  

Rostov Region belongs to the highly protected natural territories characterized by the continuous plowing. There territories are the only reserves with the soils preserved in their natural state. However, these areas often lack detailed information about the soils quality and composition. Surveying soils on these territories is crucial for determination of their basic physical and chemical properties. The resulted compilation of soil maps could lay a foundation for creating the Red Book of Soils and the formation of a section in the soil-geographical database of the Russian Federation. Subsequently, such information can be used as a background data for the main types of soils in the region. It will be also valuable during monitoring and justification of conservation measures.


2021 ◽  
Vol 316 ◽  
pp. 51-55
Author(s):  
Tamara I. Shishelova ◽  
Vadim V. Fedchishin ◽  
Mikhail A. Khramovskih

Rapid expansion of technologies poses higher requirements to structural materials and items made of them. Conventional materials are being replaced by composite materials (composites). Different additives enhancing the properties of initial materials are used as reinforcement fibers of composites. Utilization of micro-and nanosize particles for production of present-day materials is paid much attention to. Whiskers are among such materials. These crystals have high strength, high chemical and temperature resistance. But for rational utilization of whickers of different chemical composition in composite materials one should know their physical and chemical properties. Objectives of the paper: to study physical and chemical properties of whiskers in different compounds, their composition and structure; to prove experimentally the feasibility of utilizing whiskers as a reinforcement fiber of composite materials. Object of study: specimens of whiskers of silicon nitride (Si3N4), aluminum oxide (Al2O3), aluminum nitride (AlN), and mullite (Al6Si2O13). Methods of investigation: thermal study of specimens, study of mechanical properties and chemical strength, and IR-spectroscopy. Results of study: specimens of whiskers have been studied and their mechanical properties have been tabulated for comparison. Extensive thermal investigation was followed by deduction of regularities and identification of chemical properties of whiskers. IR-spectra of whiskers have been studied and conclusions on molecular composition and on presence of impurities in some whiskers have been made.


Author(s):  
Tjokorda Gde Tirta Nindhia ◽  
Zdenek Knejzlík ◽  
Tomáš Ruml ◽  
I Wayan Surata ◽  
Tjokorda Sari Nindhia

Silk can be produced by spider or insect and have prospect as biomaterial for regenerative healing in medical treatment. Silk having physical and chemical properties that support biocompatibility in the living things..In this research, silk that was obtained from Indonesia natural resource of Attacus atlas silkmoth was explored and then will be  developed for biocompatible biomaterial. The treatment with NaOH was developed to separate the fiber from the cocoon. The obtained fiber is investigated its mechanical property by performing tensile test for single fiber. The biocompatibility testing was conducted with human cell (osteosarccoma) cultivation. The result identify that separation by using NaOH yield better better mechanical properties comparing konvenstional method with boiling in hot water. Biocompatibility testing indicate that the the fiber having good biocompatibility.


2014 ◽  
Vol 70 (a1) ◽  
pp. C141-C141
Author(s):  
Ozen Ozgen ◽  
Engin Kendi ◽  
Semra Koyunoglu ◽  
Akgul Yesilada ◽  
Hwo-Shuenn Sheu

A significant part of medicine is based on the discovery and development of drugs. It is very important to know the crystal structure of pharmaceutical compounds for fundamental understanding of structure, physical and chemical properties. Many of these materials are available only as powders. So any structural information must be obtained from powder diffraction. I am going to present following the stages while solving the structure of C23H19N4OBr, 2-[3-phenyl-4(m-bromophenyl)-2-pyrazolin-1-yl]-3-methyl-4(3H)-quinazolinone, from 2-pyrazolines derivatives. The compounds are known to display various biological properties such as fungicidal insecticidal, anti bacterial, anti viral activities, pharmacological properties such as antiinflammatory agents and have industral properties(1). The powder diffraction data was collected with Debye Scherrer camera at the BL01C2 beamline at room temperature in National Synchrotron Radiation Research Center(NSRRC), Taiwan. X-ray of wavelength was 1.0333Å. This compound crystallizes in orthorhombic system space group P bca, Z=8, unit cell parameters of a=25.83(1)Å, b=15.55(5)Å, c=10.63(3)Å, and V=4266.0(10)Å3. Reliability factors were reached Rwp=0.075, Rp=0.053, RB=0.086 ve S=1.31 after Rietveld refinement.


Author(s):  
Kaplaushenko Tm ◽  
Panasenko Oi ◽  
Kucheryavy Yu

ABSTRACTObjective: Fundamental research in pharmacy and medicine have shown that drugs, which are based on nucleus of the 1,2,4-triazole, have a widerange of biological effects. Derivatives of this heterocyclic system have well-known Ukrainian clinicians and the world scientists due to its antifungal,antidepressant, anticancer, cardio- and hepatoprotective properties. The pharmacological activity of most organic compounds depends on severaldifferent factors, including bioavailability of the substance. Hence, it is very important to consider the results of the synthetic and biological researchesand established dependence of structure on the biological action when scientists model new molecules or improve pharmacological properties of anexisting structure. One of the important social and economic problems of the pharmaceutical industry is the implementation in practice of new drugsthat could compete with expensive imported drugs. In recent times, 1,2,4-triazole-3-thioderivatives take attention of compatriots and scientists offoreign countries who are working on finding bioactive compounds including heterocyclic systems. The structure, physical and chemical properties,pharmacological activities of 1,2,4-triazoles, and their 3-thioderivatives are understudied. Hence, the study of that will be actually and novelty formodern science. The main purpose of our research is synthesis of 3-alkylsulfonyl-5-(chinoline-2-yl, 2-hydroxychinoline-4-yl)-4-R-2,4-dihydro-3N1,2,4-triazoles,studyingof its physicaland chemical properties.Methods: The initial compounds have been synthesized previously using known in literature techniques. Oxidation of the sulfur atom of thesynthesized compounds to the hexavalent condition was carried out adding solution of hydrogen peroxide.Results: The structure of the obtained compounds was determined with the modern physical and chemical analysis methods: Element analysis,infrared-spectrophotometry, and their individuality with thin layer chromatography.Conclusions: Prospect of the further researches is determination of acute toxicity and next studying of pharmacological properties of the synthesizedcompounds.Keywords: 1,2,4-triazoles, Synthesis, Chemical properties, Chinoline.1 


Sign in / Sign up

Export Citation Format

Share Document