scholarly journals Hybrid Materials Based on Multi-Walled Carbon Nanotubes and Nanoparticles with Antimicrobial Properties

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1415
Author(s):  
Madalina Elena David ◽  
Rodica-Mariana Ion ◽  
Ramona Marina Grigorescu ◽  
Lorena Iancu ◽  
Alina Maria Holban ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Antimicrobial Activity ◽  
Hybrid Materials ◽  
Antimicrobial Agents ◽  
Antimicrobial Properties ◽  
Ag Nps ◽  
X Ray ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

In this study, multi-walled carbon nanotubes (MWCNTs) were decorated with different types of nanoparticles (NPs) in order to obtain hybrid materials with improved antimicrobial activity. Structural and morphological analysis, such as Fourier transformed infrared spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, environmental scanning electron microscopy/energy-dispersive X-ray spectroscopy and the Brunauer–Emmett–Teller technique were used in order to investigate the decoration of the nanotubes with NPs. Analysis of the decorated nanotubes showed a narrow size distribution of NPs, 7–13 nm for the nanotubes decorated with zinc oxide (ZnO) NPs, 15–33 nm for the nanotubes decorated with silver (Ag) NPs and 20–35 nm for the nanotubes decorated with hydroxyapatite (HAp) NPs, respectively. The dispersion in water of the obtained nanomaterials was improved for all the decorated MWCNTs, as revealed by the relative absorbance variation in time of the water-dispersed nanomaterials. The obtained nanomaterials showed a good antimicrobial activity; however, the presence of the NPs on the surface of MWCNTs improved the nanocomposites’ activity. The presence of ZnO and Ag nanoparticles enhanced the antimicrobial properties of the material, in clinically relevant microbial strains. Our data proves that such composite nanomaterials are efficient antimicrobial agents, suitable for the therapy of severe infection and biofilms.

Synthesis and Characteristics of Hierarchical Nanostructure Fe3O4 Coated Multi-Walled Carbon Nanotubes

2014 ◽  
Vol 926-930 ◽  
pp. 258-261
Author(s):  
Jing Heng Deng ◽  
Kan Ping Yu ◽  
Jian Guo Xie
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Photoelectron Spectroscopy ◽  
Solvothermal Process ◽  
X Ray ◽  
Hierarchical Nanostructure ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

Hierarchical nanostructure Fe3O4/multi-walled carbon nanotubes (Fe3O4/MWCNTs) were prepared by solvothermal process using acid treated MWCNTs and iron acetylacetonate in ethylene glycol as reduction reagent. The materials were characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET). The results showed that petal-like hierarchical Fe3O4 grew on MWCNTs and the Fe3O4 nanoparticles had diameters in the range of 55-110 nm. It was a facile approach to grow hierarchical nanoFe3O4.

Carbon nanotubes and metalloporphyrins and metallophthalocyanines-based materials for electroanalysis

2012 ◽  
Vol 16 (07n08) ◽  
pp. 713-740 ◽  
Author(s):  
José H. Zagal ◽  
Sophie Griveau ◽  
Mireya Santander-Nelli ◽  
Silvia Gutierrez Granados ◽  
Fethi Bedioui
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Hybrid Materials ◽  
Photoelectron Spectroscopy ◽  
State Of The Art ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Walled Carbon Nanotubes

We discuss here the state of the art on hybrid materials made from single (SWCNT) or multi (MWCNT) walled carbon nanotubes and MN4complexes such as metalloporphyrins and metallophthalocyanines. The hybrid materials have been characterized by several methods such as cyclic voltammetry (CV), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electrochemical microscropy (SECM). The materials are employed for electrocatalysis of reactions such as oxygen and hydrogen peroxide reduction, nitric oxide oxidation, oxidation of thiols and other pollutants.

Synthesis and Characterization of Silver Coated Multi Walled Carbon Nanotubes for Dye Degradation in Textile Waste Water

2018 ◽  
Vol 24 (8) ◽  
pp. 5677-5680
Author(s):  
C Shilpa ◽  
N Pradeep ◽  
V Uma
Keyword(s):  
Waste Water ◽  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Dye Degradation ◽  
Textile Waste ◽  
X Ray ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Textile Waste Water ◽  
Scanning Electron

The most important challenge across the globe in recent years is to meet the sufficient supply of drinking water and to reduce water pollution, one of the major problems is the waste water from the textile industry and the purification of dye based water is a challenge for many years. In this paper we report dye degradation in textile waste water using Ag coated MWCNTs. Multi walled carbon nanotubes were synthesized using chemical vapor deposition method, using powder catalyst and the coating of Silver in MWCNTs was done by wet chemical method. Three Different silver concentrations were taken for coating the MWCNT. These Ag coated Multiwall carbon nanotubes were characterized by X-ray Diffraction, Field Emission Scanning Electron Microscopy (FESEM) and UV spectroscopy, Field Emission Scanning Electron Microscopy (FESEM) was used to study the morphology of the sample and Energy dispersive X-ray analysis (EDAX) characterization was done to study the chemical composition. The multiwalled carbon nanotubes act like a absorbent which helps in dye degradation and silver has antibacterial properties which help in removing the bacteria and viruses in water. The adsorption was tested for three different samples of Ag coated MWCNT’s using photocatalytic study. The UV intensity peaks showing the observable shift in intensity. Adsorption column test was done, using the Ag coated MWCNTs, using dye based water appears clear after the test.

Hybrid Materials Based on Multi-walled Carbon Nanotubes with Antimicrobial Properties

2018 ◽  
Vol 69 (10) ◽  
pp. 2625-2632
Author(s):  
Daniela Ionita ◽  
Camelia Ungureanu ◽  
Mariana Prodana ◽  
Andrada Maria Negru ◽  
Marius Enachescu
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Transmission Electron Microscopy ◽  
Reference Sample ◽  
Antimicrobial Properties ◽  
Carboxyl Groups ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

In the present paper were prepared four types of sample consisting of multi-walled carbon nanotubes functionalized with carboxyl groups (MWCNT-COOH being the reference sample) and further functionalized with ZnCl2, MgCl2, AgNO3 and CuCl2. The samples were submitted to scanning electron microscopy (SEM), Raman microscopy, scanning transmission electron microscopy (STEM), and determined the antimicrobial character.

scholarly journals Biocompatibility Characteristics of Titanium Coated with Multi Walled Carbon Nanotubes—Hydroxyapatite Nanocomposites

Materials ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 224 ◽  
Author(s):  
Jung-Eun Park ◽  
Yong-Seok Jang ◽  
Tae-Sung Bae ◽  
Min-Ho Lee
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Sol Gel ◽  
Pure Titanium ◽  
Cell Proliferation And Differentiation ◽  
Transmission Electron ◽  
Proliferation And Differentiation ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Multi walled carbon nanotubes-hydroxyapatite (MWCNTs-HA) with various contents of MWCNTs was synthesized using the sol-gel method. MWCNTs-HA composites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). HA particles were generated on the surface of MWCNT. Produced MWCNTs-HA nanocomposites were coated on pure titanium (PT). Characteristic of the titanium coated MWCNTs-HA was evaluated by field-emission scanning electron microscopy (FE-SEM) and XRD. The results show that the titanium surface was covered with MWCNTs-HA nanoparticles and MWCNTs help form the crystalized hydroxyapatite. Furthermore, the MWCNTs-HA coated titanium was investigated for in vitro cellular responses. Cell proliferation and differentiation were improved on the surface of MWCNT-HA coated titanium.

Metal Coated Functionalized Single-Walled Carbon Nanotubes for Composites Application

2007 ◽  
Vol 561-565 ◽  
pp. 655-658 ◽  
Author(s):  
Qiang Zeng ◽  
Jennifer Luna ◽  
Y. Bayazitoglu ◽  
Kenneth Wilson ◽  
M. Ashraf Imam ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Single Walled Carbon Nanotubes ◽  
Metal Composite ◽  
X Ray ◽  
Single Walled Carbon ◽  
Transmission Electron ◽  
Nucleation Sites ◽  
Metal Composite Materials ◽  
Walled Carbon Nanotubes

This study is considered as a method for producing multifunctional metal composite materials by using Single-walled Carbon Nanotubes (SWNTs). In this research, various metals (Ni, Cu, Ag ) were successfully deposited onto the surface of SWNTs. It has been found that homogenous dispersion and dense nucleation sites are the necessary conditions to form uniform coating on SWNTs. Functionalization has been applied to achieve considerable improvement in the dispersion of purified single-walled carbon nanotubes. A three-step electroless plating approach was used and the coating mechanism is described in the paper. The samples were characterized by using scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDX). The application of coated SWNTs in Titanium will be discussed in this paper.

Continuous Fixed-Bed Column Studies of Textile Effluent Treatment using Multi-Walled Carbon Nanotubes Originated from Rosmarinus officinalis Oil

2022 ◽  
Vol 10 (4) ◽  
pp. 22-30
Author(s):  
S. Valliammai ◽  
K. Gopal ◽  
R. Nithya ◽  
L. Rama Priya ◽  
D. Kavitha
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Service Time ◽  
Fixed Bed ◽  
Rosmarinus Officinalis ◽  
Time Model ◽  
Fixed Bed Column ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Bed Depth Service Time

A continuous adsorption study in a fixed-bed column was carried out using Multi-walled Carbon Nanotubes derived from Rosmarinus officinalis oil as an adsorbent for removing the textile dye Acid blue 40 from an aqueous solution. The adsorbent, MWNTs were prepared from Rosmarinus officinalis oil as a precursor to Fe/Mo catalyst supported on silica at 650 ºC under N2 atmosphere by spray pyrolysis process characterized by scanning electron microscopy, Transmission Electron microscopy, and Raman spectroscopy. The effects of adsorbent bed height (2–6 cm), initial ion concentration (20– 60 mg/L), and flow rate (10–30 mL/min) on the column performance were analyzed. The breakthrough curve was analyzed using the mathematical models of Thomas, Yoon-Nelson, and bed depth service time. The Thomas model at different conditions defined the behaviors of the breakthrough curves. The bed depth service time model showed good agreement with the experimental data. The high values of correlation coefficients (R2 0.9875) obtained indicate the validity of the bed depth service time model for the present column system.

Electron Microscopy Characterization of Platinum Catalysts Supported on Multi-walled Carbon Nanotubes

2012 ◽  
Vol 18 (S2) ◽  
pp. 1316-1317
Author(s):  
M.J. Guinel ◽  
N. Brodusch ◽  
R. Gauvin ◽  
Y. Verde-Gomez ◽  
B. Escobar-Morales
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Platinum Catalysts ◽  
Multi Walled Carbon Nanotubes ◽  
Microscopy Characterization ◽  
Walled Carbon Nanotubes

Extended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 – August 2, 2012.

scholarly journals Polymeric Composites Based on Polyurea Matrix Reinforced with Carbon Nanotubes

2017 ◽  
Vol 54 (1) ◽  
pp. 41-44 ◽  
Author(s):  
Maria Adina Vulcan ◽  
Celina Damian ◽  
Paul Octavian Stanescu ◽  
Eugeniu Vasile ◽  
Razvan Petre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Scanning Electron Microscopy ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This paper deals with the synthesis of polyurea and its use as polymer matrix for nanocomposites reinforced with multi-walled carbon nanotubes (MWCNT). Two types of materials were obtained during this research, the first cathegory uses the polyurea as matrix and the second one uses a mixture between epoxy resin and polyurea. The nanocomposites were characterized by Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), Scanning Electron Microscopy (SEM) and Tensile Tests .The elastomeric features of nanocomposites were highlighted by the results which showed low value of Tg. Also higher thermal stability with ~40oC compared with commercial products (M20) were observed, but lower mechanical properties compared to neat polyurea.

Sign in / Sign up

Export Citation Format

Share Document