scholarly journals Enantioselective Self-Assembled Nanofibrillar Network with Glutamide-Based Organogelator

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1376
Author(s):  
Nao Nagatomo ◽  
Hisashi Oishi ◽  
Yutaka Kuwahara ◽  
Makoto Takafuji ◽  
Reiko Oda ◽  
...  
Keyword(s):  
Guest Molecule ◽  
Functional Group ◽  
Head Group ◽  
Guest Molecules ◽  
Electron Microscopies ◽  
Charged Surfaces ◽  
Transmission Electron ◽  
Uv Visible ◽  
Acid Functional Group ◽  
Multiple Interactions

A chiral molecular gelation system, as a chiral host, was used to effectively realize enantioselectivity using the simple carboxylic acid functional group. For this purpose, an L-glutamic-acid-based lipidic amphiphile (G-CA) with a carboxylic head group was selected and its responsiveness to cationic guest molecules was investigated. The dispersion morphology of G-CA in its solution state was examined by confocal and transmission electron microscopies, while interactions between the G-CA, as the host system, and guest molecules were evaluated by UV-visible, circular dichroism, and fluorescence spectroscopies. As a result, enantioselectivity was effectively induced when G-CA formed highly ordered aggregates that provide negatively charged surfaces in which carboxyl groups are assembled in highly ordered states, and when the two cationic groups of the guest molecule are attached to this surface through multiple interactions.

Grafting of Polymers to Solid Surfaces by using Immobilized Azoinitiators

1993 ◽  
Vol 304 ◽  
Author(s):  
O. Prucker ◽  
J. Rühe
Keyword(s):  
Diffuse Reflectance ◽  
Functional Group ◽  
Solid Surfaces ◽  
Covalent Attachment ◽  
Head Group ◽  
Radical Chain ◽  
Molecular Weights ◽  
Transmission Electron ◽  
Covalently Bonded ◽  
Reflectance Ftir

AbstractThe covalent attachment of polymers such as polystyrene, polymethylmethacrylate and polyacrylonitrile to microparticulate silica and to silicon wafers through immobilized radical chain initiators (especially azocompounds) is described. The initiator is bonded to the surface using α,ω-substituted silanes, which have only one functional group at the silane head group.Up to 10 g of polymer per g of silica could be covalently bonded to the surface. The attached monolayers were characterized using diffuse reflectance FTIR spectroscopy, XPS and elemental analysis. After the cleaving off of the attached layers molecular weights up to 300.000 g/mol were measured. Transmission electron micrographs generated with an element specific imaging technique (ESI) clearly show a continuous, about 10 nm thick, polymer layer around the silica particles.

scholarly journals Hydrogen Inter-Cage Hopping and Cage Occupancies inside Hydrogen Hydrate: Molecular-Dynamics Analysis

2020 ◽  
Vol 11 (1) ◽  
pp. 282
Author(s):  
Yogeshwaran Krishnan ◽  
Mohammad Reza Ghaani ◽  
Arnaud Desmedt ◽  
Niall J. English
Keyword(s):  
Molecular Dynamics ◽  
Energy Barrier ◽  
Guest Molecule ◽  
Arrhenius Equation ◽  
Dynamics Simulation ◽  
Type Ii ◽  
Large Cage ◽  
Guest Molecules ◽  
Simulation Time ◽  
Average Occupancy

The inter-cage hopping in a type II clathrate hydrate with different numbers of H2 and D2 molecules, from 1 to 4 molecules per large cage, was studied using a classical molecular dynamics simulation at temperatures of 80 to 240 K. We present the results for the diffusion of these guest molecules (H2 or D2) at all of the different occupations and temperatures, and we also calculated the activation energy as the energy barrier for the diffusion using the Arrhenius equation. The average occupancy number over the simulation time showed that the structures with double and triple large-cage H2 occupancy appeared to be the most stable, while the small cages remained with only one guest molecule. A Markov model was also calculated based on the number of transitions between the different cage types.

scholarly journals Using maize wastes, fermented by co-cultures of Trichoderma harzianum and Pseudomonas fluorescens, as grain dressing against m maize diseases under field conditions

2020 ◽  
Vol 30 (1) ◽  
Author(s):  
Sherien M. M. Atalla ◽  
Mokhtar M. Abdel-Kader ◽  
Nadia G. El-Gamal ◽  
Nehal S. El-Mougy
Keyword(s):  
Pseudomonas Fluorescens ◽  
Trichoderma Harzianum ◽  
Raw Materials ◽  
Chitosan Nanoparticles ◽  
Field Conditions ◽  
Optimum Ratio ◽  
Transmission Electron ◽  
Environmentally Safe ◽  
The Mean ◽  
Uv Visible

Abstract Maize (Zea mays L.) is one of the most economic crops in Egypt. Production of amylase from the waste of maize is the most economic and cheap renewable and most abundant raw materials present in environment. Biosynthesis of Cu-chitosan nanoparticles for amylase production by co-culturing between Trichoderma harzianum and Pseudomonas fluorescens at different ratios compared to free conditions was the main purpose of this study. The optimum ratio 8:2, recorded between P. fluorescens: T. harzianum, was the most promising for production of amylase produce 22.47 and 28.60 U/ml for free and nano, respectively. The UV visible spectral analysis Cu-chitosan NPs was 220 nm, while the mean diameter, using transmission electron microscopy was 0.5 μm. Application of fermented maize wastes by co-cultivation of P. fluorescence and T. harzianum, as a grain dressing before sowing declared the reduction in both root and foliar diseases during the maize growing season, starting from germination up to 70 days of its vegetative growth under field conditions. A promising approach is the creation and use of environmentally safe products, whose protective effect is based on the induction of hydrolase inhibitors in plants.

scholarly journals V2O3/C composite fabricated by carboxylic acid-assisted sol–gel synthesis as anode material for lithium-ion batteries

2021 ◽  
Author(s):  
G. S. Zakharova ◽  
E. Thauer ◽  
A. N. Enyashin ◽  
L. F. Deeg ◽  
Q. Zhu ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Lithium Ion Batteries ◽  
Sol Gel ◽  
Carbon Sources ◽  
Lithium Ion ◽  
X Ray Diffraction ◽  
Electron Microscopies ◽  
Transmission Electron ◽  
Battery Electrode ◽  
Sol Gel Synthesis

AbstractThe potential battery electrode material V2O3/C has been prepared using a sol–gel thermolysis technique, employing vanadyl hydroxide as precursor and different organic acids as both chelating agents and carbon sources. Composition and morphology of resultant materials were characterized by X-ray diffraction, Raman spectroscopy, scanning and transmission electron microscopies, physical sorption, and elemental analysis. Stability and electronic properties of model composites with chemically and physically integrated carbon were studied by means of quantum-chemical calculations. All fabricated composites are hierarchically structured and consist of carbon-covered microparticles assembled of polyhedral V2O3 nanograins with intrusions of amorphous carbon at the grain boundaries. Such V2O3/C phase separation is thermodynamically favored while formation of vanadium (oxy)carbides or heavily doped V2O3 is highly unlikely. When used as anode for lithium-ion batteries, the nanocomposite V2O3/C fabricated with citric acid exhibits superior electrochemical performance with an excellent cycle stability and a specific charge capacity of 335 mAh g−1 in cycle 95 at 100 mA g−1. We also find that the used carbon source has only minor effects on the materials’ electrochemical performance.

scholarly journals Optical and Photoacoustic Properties of Laser-Ablated Silver Nanoparticles in a Carbon Dots Solution

Molecules ◽  
2020 ◽  
Vol 25 (24) ◽  
pp. 5798
Author(s):  
Amir Reza Sadrolhosseini ◽  
Ganesan Krishnan ◽  
Suhaidi Shafie ◽  
Suraya Abdul Rashid ◽  
Sulaiman Wadi Harun
Keyword(s):  
Silver Nanoparticles ◽  
Carbon Dots ◽  
Thermal Effusivity ◽  
Nonlinear Susceptibility ◽  
Time Range ◽  
Raman Signal ◽  
Optical Parameters ◽  
Visible Spectroscopy ◽  
Transmission Electron ◽  
Uv Visible

This study used the carbon dots solution for the laser ablation technique to fabricate silver nanoparticles. The ablation time range was from 5 min to 20 min. Analytical methods, including Fourier transform infrared spectroscopy (FTIR), UV-visible spectroscopy, transmission electron microscopy, and Raman spectroscopy were used to categorize the prepared samples. The UV-visible and z-scan techniques provided optical parameters such as linear and nonlinear refractive indices in the range of 1.56759 to 1.81288 and 7.3769 × 10−10 cm2 W−1 to 9.5269 × 10−10 cm2 W−1 and the nonlinear susceptibility was measured in the range of 5.46 × 10−8 to 6.97 × 10−8 esu. The thermal effusivity of prepared samples, which were measured using the photoacoustic technique, were in the range of 0.0941 W s1/2 cm−2 K−1 to 0.8491 W s1/2 cm−2 K−1. The interaction of the prepared sample with fluoride was investigated using a Raman spectrometer. Consequently, the intensity of the Raman signal decreased with the increasing concentration of fluoride, and the detection limit is about 0.1 ppm.

Epitaxial Growth of AlN Thin Films on Silicon and Sapphire by Pulsed Laser Deposition

1995 ◽  
Vol 395 ◽  
Author(s):  
R.D. Vispute ◽  
H. Wu ◽  
K. Jagannadham ◽  
J. Narayan
Keyword(s):  
Thin Films ◽  
Electrical Resistivity ◽  
Pulsed Laser Deposition ◽  
Laser Energy ◽  
Pulsed Laser ◽  
Laser Deposition ◽  
Breakdown Field ◽  
Transmission Electron ◽  
Uv Visible ◽  
Relationship Of

ABSTRACTAIN thin films have been grown epitaxially on Si(111) and Al2O3(0001) substrates by pulsed laser deposition. These films were characterized by FTIR and UV-Visible, x-ray diffraction, high resolution transmission electron and scanning electron microscopy, and electrical resistivity. The films deposited on silicon and sapphire at 750-800°C and laser energy density of ∼ 2 to 3J/cm2 are epitaxial with an orientational relationship of AIN[0001]║ Si[111], AIN[2 110]║Si[011] and AlN[0001]║Al2O3[0001], AIN[1 2 1 0]║ Al2O3[0110] and AIN[1010] ║ Al2O3[2110]. The both AIN/Si and AIN/Al2O3 interfaces were found to be quite sharp without any indication of interfacial reactions. The absorption edge measured by UV-Visible spectroscopy for the epitaxial AIN film grown on sapphire was sharp and the band gap was found to be 6.1eV. The electrical resistivity of the films was about 5-6×l013Ω-cm with a breakdown field of 5×106V/cm. We also found that the films deposited at higher laser energy densities ≥10J/cm2 and lower temperatures ≤650°C were nitrogen deficient and containing free metallic aluminum which degrade the microstructural, electrical and optical properties of the AIN films

Physical Simulation of Weldability of Weldox 1300 Steel

2013 ◽  
Vol 762 ◽  
pp. 551-555 ◽  
Author(s):  
Marek Stanislaw Węglowski ◽  
Marian Zeman ◽  
Miroslaw Lomozik
Keyword(s):  
Mechanical Properties ◽  
Impact Toughness ◽  
Physical Simulation ◽  
High Strength ◽  
Parent Material ◽  
Cooling Time ◽  
Electron Microscopies ◽  
Transmission Electron ◽  
Transformation Diagrams ◽  
The Impact

In the present study, the investigation of weldability of new ultra-high strength - Weldox 1300 steel has been presented. The thermal simulated samples were used to investigate the effect of welding cooling time t8/5 on the microstructure and mechanical properties of the heat affected zone (HAZ). In the frame of these investigation the microstructure was studied by the light (LM) and transmission electron microscopies (TEM). It has been shown that the microstructure of the Weldox 1300 steel is composed of tempered martensite, and inside the laths the minor precipitations mainly V(CN) and molybdenum carbide Mo2C were observed. Mechanical properties of parent material were analysed by the tensile, impact and hardness tests. In details the influence of cooling time in the range of 2,5 - 300 s. on hardness, impact toughness and microstructure of simulated HAZ was studied by using welding thermal simulation test. The results show that the impact toughness and hardness decrease with the increase of t8/5 under the condition of a single thermal cycle in simulated HAZ. The continuous cooling transformation diagrams (CCT-W for welding conditions) of Weldox 1300 steel for welding purposes was also elaborated. The steel Weldox 1300 for cooling time in the range of 2,5 - 4 s showed martensite microstructure, for time from 4 s to 60 s mixture of martensite and bainite, and for longer cooling time mixture of ferrite, bainite and martensite. The results indicated that the weldability of Weldox 1300 steel is limited and to avoid the cold cracking the preheating procedure or medium net linear heat input should be used.

Synthesis and Characterizations of Nanocubes, Monodispersed Nanocrystals and Nanospheres of Au

2007 ◽  
Vol 353-358 ◽  
pp. 2163-2166
Author(s):  
Ming Yang ◽  
Guo Qing Zhou ◽  
Jiang Guo Zhao ◽  
Zhan Jun Li
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Powder Diffraction ◽  
Visible Absorption ◽  
X Ray ◽  
Transmission Electron ◽  
Uv Visible ◽  
Scherrer Formula ◽  
Visible Absorption Spectroscopy

Nanocubes, monodispersed nanocrystals and nanospheres of Au have been prepared by a simple reaction between HAuCl4·4H2O, NaOH and NH2OH·HCl in the presence of gelatin. The role of gelatin and the affection of pH in producing the nanoparticles of Au were discussed. The products were characterized by X-ray powder diffraction, transmission electron microscopy, and UV-visible absorption spectroscopy. The sizes of the monodispersed nanocrystals of Au were estimated by Debye-Scherrer formula according to XRD spectrum.

scholarly journals Experimental Investigation on Stability, Viscosity, and Electrical Conductivity of Water-Based Hybrid Nanofluid of MWCNT-Fe2O3

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 136
Author(s):  
Solomon O. Giwa ◽  
Mohsen Sharifpur ◽  
Mohammad H. Ahmadi ◽  
S. M. Sohel Murshed ◽  
Josua P. Meyer
Keyword(s):  
Electrical Conductivity ◽  
Visual Inspection ◽  
Volume Concentration ◽  
Working Fluid ◽  
Hybrid Nanofluid ◽  
Multiwalled Carbon ◽  
Transmission Electron ◽  
Hybrid Nanofluids ◽  
Uv Visible ◽  
The Stability

The superiority of nanofluid over conventional working fluid has been well researched and proven. Newest on the horizon is the hybrid nanofluid currently being examined due to its improved thermal properties. This paper examined the viscosity and electrical conductivity of deionized water (DIW)-based multiwalled carbon nanotube (MWCNT)-Fe2O3 (20:80) nanofluids at temperatures and volume concentrations ranging from 15 °C to 55 °C and 0.1–1.5%, respectively. The morphology of the suspended hybrid nanofluids was characterized using a transmission electron microscope, and the stability was monitored using visual inspection, UV–visible, and viscosity-checking techniques. With the aid of a viscometer and electrical conductivity meter, the viscosity and electrical conductivity of the hybrid nanofluids were determined, respectively. The MWCNT-Fe2O3/DIW nanofluids were found to be stable and well suspended. Both the electrical conductivity and viscosity of the hybrid nanofluids were augmented with respect to increasing volume concentration. In contrast, the temperature rise was noticed to diminish the viscosity of the nanofluids, but it enhanced electrical conductivity. Maximum increments of 35.7% and 1676.4% were obtained for the viscosity and electrical conductivity of the hybrid nanofluids, respectively, when compared with the base fluid. The obtained results were observed to agree with previous studies in the literature. After fitting the obtained experimental data, high accuracy was achieved with the formulated correlations for estimating the electrical conductivity and viscosity. The examined hybrid nanofluid was noticed to possess a lesser viscosity in comparison with the mono-particle nanofluid of Fe2O3/water, which was good for engineering applications as the pumping power would be reduced.

Preparation of Triangular Silver Nanoparticles Using Polyvinyl Pyrrolidone with Different Concentration

2013 ◽  
Vol 873 ◽  
pp. 206-210
Author(s):  
Kai Li ◽  
Rao Fu ◽  
Qing Ran Gao ◽  
Ai Wei Tang ◽  
Ying Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Silver Nanoparticles ◽  
Driving Force ◽  
Ostwald Ripening ◽  
Polyvinyl Pyrrolidone ◽  
Protective Agent ◽  
Ag Nps ◽  
Transmission Electron ◽  
Uv Visible

This paper continues our previous work on preparation of triangular silver nanoparticles. The method proceeds with reaction of silver nitrate with hydrazine hydrate in the presence of polyvinyl pyrrolidone in aqueous solution. Effects of the concentration of PVP on the morphologies of Ag NPs were systematically investigated. The obtained Ag NPs were characterized by transmission electron microscopy and UV-visible spectrophotometer. The results showed that, triangular Ag NPs with edge lengths in the range of 50-200 nm were obtained using PVP as protective agent with lower concentration. As the concentration of PVP increased, spherical Ag NPs with their sizes about 6.2 nm were prepared and triangular Ag NPs were not obtained. The formation mechanism of triangular Ag NPs has been studied. Ostwald ripening is the driving force on the conversion of spherical Ag NPs to triangular Ag NPs in the presence of PVP.

Sign in / Sign up

Export Citation Format

Share Document