scholarly journals In Situ Local Oxidation of SnO Induced by Laser Irradiation: A Stability Study

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 976
Author(s):  
Antonio Vázquez-López ◽  
David Maestre ◽  
Julio Ramírez-Castellanos ◽  
Ana Cremades
Keyword(s):  
Raman Spectroscopy ◽  
Laser Irradiation ◽  
Stability Study ◽  
Thermal Treatments ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Local Oxidation ◽  
Potential Applicability ◽  
The Stability

In this work, semiconductor tin oxide (II) (SnO) nanoparticles and plates were synthesized at room conditions via a hydrolysis procedure. X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed the high crystallinity of the as-synthesized romarchite SnO nanoparticles with dimensions ranging from 5 to 16 nm. The stability of the initial SnO and the controlled oxidation to SnO2 was studied based on either thermal treatments or controlled laser irradiation using a UV and a red laser in a confocal microscope. Thermal treatments induced the oxidation from SnO to SnO2 without formation of intermediate SnOx, as confirmed by thermodiffraction measurements, while by using UV or red laser irradiation the transition from SnO to SnO2 was controlled, assisted by formation of intermediate Sn3O4, as confirmed by Raman spectroscopy. Photoluminescence and Raman spectroscopy as a function of the laser excitation source, the laser power density, and the irradiation duration were analyzed in order to gain insights in the formation of SnO2 from SnO. Finally, a tailored spatial SnO/SnO2 micropatterning was achieved by controlled laser irradiation with potential applicability in optoelectronics and sensing devices.

Incorporating CsPbBr3 Nanocrystals into Porous AlO(OH) Matrices to Improve their Stability in Backlit Displays

NANO ◽  
2019 ◽  
Vol 14 (12) ◽  
pp. 1950156 ◽  
Author(s):  
Jiangcong Zhou ◽  
Yiqing Lai ◽  
Na Lin ◽  
Xiaotian Huang ◽  
Yu Chen ◽  
...  
Keyword(s):  
Surface Area ◽  
Light Emitting Diode ◽  
Ethanol Solution ◽  
X Ray Diffraction ◽  
Light Emitting ◽  
Transmission Electron ◽  
Bet Specific Surface Area ◽  
Urgent Task ◽  
The Stability

Currently, the poor stability of inorganic perovskite CsPbX3 ([Formula: see text], Br, I) nanocrystals restricts their practical application in optoelectronic devices. Therefore, improving the stability of this material remains an urgent task for most researchers. In this study, incorporation of CsPbBr3 nanocrystals into porous AlO(OH) matrices through simple in situ synthesis was demonstrated to be an efficient approach for improving the nanocrystal stability. X-ray diffraction (XRD) revealed that the as-obtained product was composed of cubic CsPbBr3 nanocrystals and orthorhombic AlO(OH) compounds. In addition, transmission electron microscopy (TEM) revealed that the CsPbBr3 nanocrystals were successfully encapsulated by AlO(OH) matrices. The Brunauer–Emmett–Teller (BET) specific surface area was 234.96[Formula: see text]m2 g[Formula: see text] for AlO(OH) and 60.08[Formula: see text]m2 g[Formula: see text] for the CsPbBr3@AlO(OH) composites. The decrease in surface area could be attributed to the filling of the AlO(OH) pores by the CsPbBr3 nanocrystals. Further, the as-prepared composites showed red-shifted emission at 522[Formula: see text]nm and a larger full width at half-maximum (FWHM) as 26[Formula: see text]nm, compared with those of the CsPbBr3 nanocrystals with the emission at 517[Formula: see text]nm and FWHM as 17[Formula: see text]nm. More importantly, the emission intensity preserved 67% of the original value after a storage time of 120[Formula: see text]h, but bare CsPbBr3 nanocrystals rapidly degraded within only 1[Formula: see text]h in the polar ethanol solution. Finally, a light-emitting diode (LED) device was fabricated by coating the CsPbBr3@AlO(OH) composites and red commercial K2SiF6:Mn[Formula: see text] phosphors on the surface of a blue InGaN chip, covering 96% of National Television Standards Committee. The results indicate that the obtained composites could be promising luminescent materials for backlit displays.

Effect of Thermomechanical Processing on the Microstructure and Retained Austenite Stability during In Situ Tensile Testing Using Synchrotron X-Ray Diffraction of NbMoAl TRIP Steel

2011 ◽  
Vol 172-174 ◽  
pp. 741-746 ◽  
Author(s):  
Elena V. Pereloma ◽  
Lai Chang Zhang ◽  
Klaus Dieter Liss ◽  
Ulf Garbe ◽  
Jonathan Almer ◽  
...  
Keyword(s):  
Tensile Testing ◽  
Retained Austenite ◽  
Thermomechanical Processing ◽  
Critical Role ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
The Stability

In this work we compare and contrast the stability of retained austenite during tensile testing of Nb-Mo-Al transformation-induced plasticity steel subjected to different thermomechanical processing schedules. The obtained microstructures were characterised using optical metallography, transmission electron microscopy and X-ray diffraction. The transformation of retained austenite to martensite under tensile loading was observed by in-situ high energy X-ray diffraction at 1ID / APS. It has been shown that the variations in the microstructure of the steel, such as volume fractions of present phases, their morphology and dimensions, play a critical role in the strain-induced transition of retained austenite to martensite.

Thermal stability of Nb thin films on sapphire

1996 ◽  
Vol 11 (5) ◽  
pp. 1255-1264 ◽  
Author(s):  
Thomas Wagner ◽  
Marko Lorenz ◽  
Manfred Rühle
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Orientation Relationship ◽  
High Energy ◽  
X Ray Diffraction ◽  
Model Study ◽  
Transmission Electron ◽  
The Stability ◽  
Thermal Stability Of

The Nb/α−Al2O3 system has been used as a model study for investigating the stability of different MBE grown epitaxial Nb films on α−Al2O3 substrates. The films were grown at 800 °C in ultrahigh vacuum. The growth process was monitored in situ by reflection high energy electron diffraction (RHEED). After deposition the structure of the film was investigated by x-ray diffraction (XRD) and conventional transmission electron microscopy (CTEM) which encompasses also selected area diffraction (SAD). Both techniques revealed the following orientation relationship between the Nb film and the α–Al2O3 substrate: (0001)α–Al2O3‖ (111)Nb; [2110]α–Al2O3‖ [110]Nb. The stability of the niobium films was investigated by annealing the Nb-film/α–Al2O3 system to temperatures up to 1500 °C for different periods of time. Surprisingly, the orientation relationship between the Nb film and the substrate changed to (0001)α–Al2O3‖ (110)Nb; [0110]α–Al2O3‖ [001]Nb. A model will be developed which shows that above a critical film thickness the growth orientation is metastable with respect to its crystallographic orientation. Furthermore, high resolution transmission electron microscopy (HREM) was performed to investigate the defect structure of the annealed Nb/α–Al2O3 interface.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

Epitaxy and texture analysis of Bi-Sr-Ca-Cu-O thin films on (100) MgO using Transmission Electron Microscopy

1990 ◽  
Vol 48 (4) ◽  
pp. 68-69
Author(s):  
J. T. Sizemore ◽  
D. G. Schlom ◽  
Z. J. Chen ◽  
J. N. Eckstein ◽  
I. Bozovic ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Transmission Electron Microscopy ◽  
Critical Currents ◽  
Unit Cell ◽  
X Ray Diffraction ◽  
Cell Axis ◽  
Transmission Electron ◽  
Synthesis Procedure

Investigators observe large critical currents for superconducting thin films deposited epitaxially on single crystal substrates. The orientation of these films is often characterized by specifying the unit cell axis that is perpendicular to the substrate. This omits specifying the orientation of the other unit cell axes and grain boundary angles between grains of the thin film. Misorientation between grains of YBa2Cu3O7−δ decreases the critical current, even in those films that are c axis oriented. We presume that these results are similar for bismuth based superconductors and report the epitaxial orientations and textures observed in such films.Thin films of nominally Bi2Sr2CaCu2Ox were deposited on MgO using molecular beam epitaxy (MBE). These films were in situ grown (during growth oxygen was incorporated and the films were not oxygen post-annealed) and shuttering was used to encourage c axis growth. Other papers report the details of the synthesis procedure. The films were characterized using x-ray diffraction (XRD) and transmission electron microscopy (TEM).

Devitrification products of rapidly solidified Ni-Nb amorphous alloys.

1990 ◽  
Vol 48 (4) ◽  
pp. 950-951
Author(s):  
G. A. Bertero ◽  
W.H. Hofmeister ◽  
N.D. Evans ◽  
J.E. Wittig ◽  
R.J. Bayuzick
Keyword(s):  
Electron Microscopy ◽  
Amorphous Structure ◽  
Sulphuric Acid Solution ◽  
X Ray Diffraction ◽  
High Fracture ◽  
Transmission Electron ◽  
Xrd Techniques ◽  
Rapidly Solidified ◽  
Electromagnetically Levitated

Rapid solidification of Ni-Nb alloys promotes the formation of amorphous structure. Preliminary results indicate promising elastic properties and high fracture strength for the metallic glass. Knowledge of the thermal stability of the amorphus alloy and the changes in properties with temperature is therefore of prime importance. In this work rapidly solidified Ni-Nb alloys were analyzed with transmission electron microscopy (TEM) during in-situ heating experiments and after isothermal annealing of bulk samples. Differential thermal analysis (DTA), scanning electron microscopy (SEM) and x-ray diffraction (XRD) techniques were also used to characterize both the solidification and devitrification sequences.Samples of Ni-44 at.% Nb were electromagnetically levitated, melted, and rapidly solidified by splatquenching between two copper chill plates. The resulting samples were 100 to 200 μm thick discs of 2 to 3 cm diameter. TEM specimens were either ion-milled or alternatively electropolished in a methanol-10% sulphuric acid solution at 20 V and −40°C.

scholarly journals A Superhydrophobic, Antibacterial, and Durable Surface of Poplar Wood

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1885
Author(s):  
Xinyu Wu ◽  
Feng Yang ◽  
Jian Gan ◽  
Zhangqian Kong ◽  
Yan Wu
Keyword(s):  
Stearic Acid ◽  
Antibacterial Properties ◽  
Alkali Resistance ◽  
Poplar Wood ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Temperatures ◽  
Acid And Alkali Resistance ◽  
The Stability

The silver particles were grown in situ on the surface of wood by the silver mirror method and modified with stearic acid to acquire a surface with superhydrophobic and antibacterial properties. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and X-ray energy spectroscopy (XPS) were used to analyze the reaction mechanism of the modification process. Scanning electron microscopy (SEM) and contact angle tests were used to characterize the wettability and surface morphology. A coating with a micro rough structure was successfully constructed by the modification of stearic acid, which imparted superhydrophobicity and antibacterial activity to poplar wood. The stability tests were performed to discuss the stability of its hydrophobic performance. The results showed that it has good mechanical properties, acid and alkali resistance, and UV stability. The durability tests demonstrated that the coating has the function of water resistance and fouling resistance and can maintain the stability of its hydrophobic properties under different temperatures of heat treatment.

scholarly journals Carbon-coated magnetic particles increase tissue temperatures after laser irradiation

2015 ◽  
Vol 08 (05) ◽  
pp. 1550018 ◽  
Author(s):  
Shupeng Liu ◽  
Na Chen ◽  
Fufei Pang ◽  
Zhengyi Chen ◽  
Tingyun Wang
Keyword(s):  
Laser Irradiation ◽  
Magnetic Particles ◽  
Laser Energy ◽  
Thermal Therapy ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Fbg Sensor ◽  
Transmission Electron ◽  
Carbon Coated

Purpose: This work focused on the investigation the hyperthermia performance of the carbon-coated magnetic particles (CCMPs) in laser-induced hyperthermia. Materials and methods: We prepared CCMPs using the organic carbonization method, and then characterized them with transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) spectrophotometry, vibrating sample magnetometer (VSM) and X-ray diffraction (XRD). In order to evaluate their performance in hyperthermia, the CCMPs were tested in laser-induced thermal therapy (LITT) experiments, in which we employed a fully distributed fiber Bragg grating (FBG) sensor to profile the tissue's dynamic temperature change under laser irradiation in real time. Results: The sizes of prepared CCMPs were about several micrometers, and the LITT results show that the tissue injected with the CCMPs absorbed more laser energy, and its temperature increased faster than the contrast tissue without CCMPs. Conclusions: The CCMPs may be of great help in hyperthermia applications.

scholarly journals Microstructure and properties of nano-laminated Y3Si2C2 ceramics fabricated via in situ reaction by spark plasma sintering

2021 ◽  
Vol 10 (3) ◽  
pp. 578-586
Author(s):  
Lin-Kun Shi ◽  
Xiaobing Zhou ◽  
Jian-Qing Dai ◽  
Ke Chen ◽  
Zhengren Huang ◽  
...  
Keyword(s):  
Spark Plasma Sintering ◽  
Atomic Scale ◽  
Max Phase ◽  
X Ray Diffraction ◽  
Selected Area Electron Diffraction ◽  
Plasma Sintering ◽  
Transmission Electron ◽  
Spark Plasma ◽  
Diffraction Patterns

AbstractA nano-laminated Y3Si2C2 ceramic material was successfully synthesized via an in situ reaction between YH2 and SiC using spark plasma sintering technology. A MAX phase-like ternary layered structure of Y3Si2C2 was observed at the atomic-scale by high resolution transmission electron microscopy. The lattice parameters calculated from both X-ray diffraction and selected area electron diffraction patterns are in good agreement with the reported theoretical results. The nano-laminated fracture of kink boundaries, delamination, and slipping were observed at the tip of the Vickers indents. The elastic modulus and Vickers hardness of Y3Si2C2 ceramics (with 5.5 wt% Y2O3) sintered at 1500 °C were 156 and 6.4 GPa, respectively. The corresponding values of thermal and electrical conductivity were 13.7 W·m-1·K-1 and 6.3×105 S·m-1, respectively.

Sign in / Sign up

Export Citation Format

Share Document