scholarly journals Improved Thermophysical Properties and Energy Efficiency of Aqueous Ionic Liquid/MXene Nanofluid in a Hybrid PV/T Solar System

Nanomaterials ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 1372 ◽  
Author(s):  
Likhan Das ◽  
Khairul Habib ◽  
R. Saidur ◽  
Navid Aslfattahi ◽  
Syed Mohd Yahya ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Ionic Liquid ◽  
Palm Oil ◽  
Thermophysical Properties ◽  
Conductivity Measurement ◽  
Optimum Concentration ◽  
Heat Transfer Fluid ◽  
Solar Pv ◽  
T System

In recent years, solar energy technologies have developed an emerging edge. The incessant research to develop a power source alternative to fossil fuel because of its scarcity and detrimental effects on the environment is the main driving force. In addition, nanofluids have gained immense interest as superior heat transfer fluid in solar technologies for the last decades. In this research, a binary solution of ionic liquid (IL) + water based ionanofluids is formulated successfully with two dimensional MXene (Ti3C2) nano additives at three distinct concentrations of 0.05, 0.10, and 0.20 wt % and the optimum concentration is used to check the performance of a hybrid solar PV/T system. The layered structure of MXene and high absorbance of prepared nanofluids have been perceived by SEM and UV–vis respectively. Rheometer and DSC are used to assess the viscosity and heat capacity respectively while transient hot wire technique is engaged for thermal conductivity measurement. A maximum improvement of 47% in thermal conductivity is observed for 0.20 wt % loading of MXene. Furthermore, the viscosity is found to rise insignificantly with addition of Ti3C2 by different concentrations. Conversely, viscosity decreases substantially as the temperature increases from 20 °C to 60 °C. However, based on their thermophysical properties, 0.20 wt % is found to be the optimum concentration. A comparative analysis in terms of heat transfer performance with three different nanofluids in PV/T system shows that, IL+ water/MXene ionanofluid exhibits highest thermal, electrical, and overall heat transfer efficiency compared to water/alumina, palm oil/MXene, and water alone. Maximum electrical efficiency and thermal efficiency are recorded as 13.95% and 81.15% respectively using IL + water/MXene, besides that, heat transfer coefficients are also noticed to increase by 12.6% and 2% when compared to water/alumina and palm oil/MXene respectively. In conclusion, it can be demonstrated that MXene dispersed ionanofluid might be great a prospect in the field of heat transfer applications since they can augment the heat transfer rate considerably which improves system efficiency.

scholarly journals Review of water-nanofluid based photovoltaic/thermal (PV/T) systems

2019 ◽  
Vol 9 (1) ◽  
pp. 134 ◽  
Author(s):  
Nur Farhana Mohd Razali ◽  
Ahmad Fudholi ◽  
Mohd Hafidz Ruslan ◽  
Kamaruzzaman Sopian
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Solar Energy ◽  
Optical Filter ◽  
Heat Transfer Fluid ◽  
Nanoparticles Concentration ◽  
Improve Heat Transfer ◽  
New Generation ◽  
To Receive ◽  
T System

<span lang="EN-US">Solar energy is secure, clean, and available on earth throughout the year. The PV/T system is a device designed to receive solar energy and convert it into electric/thermal energy. Nanofluid is a new generation of heat transfer fluid with promising higher thermal conductivity and improve heat transfer rate compared with conventional fluids. In this review, the recent studies of PV/T using nanofluid is discussed regarding basic concept and theory PV/T, thermal conductivity of nanofluid and experimentally and theoretically study the perfromance of PV/T using nanofluid. A review of the literature shows that many studies have evaluated the potential of nanofluid as heat transfer fluid and optical filter in the PV/T system. The preparations of nanofluid play an essential key for high stability and homogenous nanofluid for a long period. The thermal conductivity of nanofluid is depending on the size of nanoparticles, concentration and preparation of nanofluids.</span>

scholarly journals Thermal Conductivity of Metastable Ionic Liquid [C2mim][CH3SO3]

Molecules ◽  
2020 ◽  
Vol 25 (18) ◽  
pp. 4290 ◽  
Author(s):  
Daniel Lozano-Martín ◽  
Salomé Inês Cardoso Vieira ◽  
Xavier Paredes ◽  
Maria José Vitoriano Lourenço ◽  
Carlos A. Nieto de Castro ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Ionic Liquid ◽  
Melting Point ◽  
Solid Phase ◽  
Freezing Point ◽  
Phase Region ◽  
Heat Transfer Fluid ◽  
Diphenyl Oxide ◽  
Conductivity Models

Ionic liquids have been suggested as new engineering fluids, namely in the area of heat transfer, as alternatives to current biphenyl and diphenyl oxide, alkylated aromatics and dimethyl polysiloxane oils, which degrade above 200 °C and pose some environmental problems. Recently, we have proposed 1-ethyl-3-methylimidazolium methanesulfonate, [C2mim][CH3SO3], as a new heat transfer fluid, because of its thermophysical and toxicological properties. However, there are some interesting points raised in this work, namely the possibility of the existence of liquid metastability below the melting point (303 K) or second order-disorder transitions (λ-type) before reaching the calorimetric freezing point. This paper analyses in more detail this zone of the phase diagram of the pure fluid, by reporting accurate thermal-conductivity measurements between 278 and 355 K with an estimated uncertainty of 2% at a 95% confidence level. A new value of the melting temperature is also reported, Tmelt = 307.8 ± 1 K. Results obtained support liquid metastability behaviour in the solid-phase region and permit the use of this ionic liquid at a heat transfer fluid at temperatures below its melting point. Thermal conductivity models based on Bridgman theory and estimation formulas were also used in this work, failing to predict the experimental data within its uncertainty.

Natural Convection in Rectangular Cavity With Nanoparticle Enhanced Ionic Liquids (NEILs)

2012 ◽  
Author(s):  
Titan C. Paul ◽  
A. K. M. M. Morshed ◽  
Elise B. Fox ◽  
Ann E. Visser ◽  
Nicholas J. Bridges ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Capacity ◽  
Ionic Liquid ◽  
Ionic Liquids ◽  
Natural Convection ◽  
Thermophysical Properties ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Convection Heat

A systematic natural convection heat transfer experiment has been carried out of nanoparticle enhanced ionic liquids (NEILs) in rectangular enclosures (lengthxwidthxheight, 50×50×50mm and 50×50×75mm) heated from below condition. In the present experiment NEIL was made of N-butyl-N-methylpyrrolidinium bis{(trifluoromethyl)sulfonyl} imide, ([C4mpyrr][NTf2]) ionic liquid with 0.5% (weight%) Al2O3 nanoparticles. In addition to characterize the natural convection behavior of NEIL, thermophysical properties such as thermal conductivity, heat capacity, and viscosity were also measured. The result shows that the thermal conductivity of NEIL enhanced ∼3% from the base ionic liquid (IL), heat capacity enhanced ∼12% over the measured temperature range. The natural convection experimental result shows consistent for two different enclosures based on the degrading natural convection heat transfer rate over the measured Rayleigh number range. Possible reasons of the degradation of natural convection heat transfer may be the relative change of the thermophysical properties of NEIL compare to the base ionic liquid.

scholarly journals Determination and measurement of some thermophysical properties of nanofluids and comparison with literature studies

2020 ◽  
pp. 239-239
Author(s):  
Adnan Topuz ◽  
Beytullah Erdoğan ◽  
Osman Aycan
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermophysical Properties ◽  
Convection Heat Transfer ◽  
Conductivity Measurement ◽  
Pumping Power ◽  
Transfer Enhancement ◽  
Convection Heat Transfer Coefficient ◽  
Volumetric Concentration ◽  
Wire Method

The thermophysical properties of nanofluids must be determined to evaluate their thermal performances like heat transfer, convection heat transfer coefficient, Nusselt number. The purpose of this study is to obtain the thermophysical properties of nanofluids. Al2O3, TiO2, and ZnO are used as a nanoparticle, while deionized water is used as base fluid. The solutions included nanoparticles in a way to be each with 0.5%, 0.7%, and 1.0% volumetric concentration were prepared. SDS was added to the solutions as a surfactant to prevent instability that occurred due to agglomeration and sedimentation. For thermal conductivity measurement, the device that works by the transient hot-wire method was used between 30-60?C temperatures. Also, for viscosity measurement, the device that works as based on the vibrating plate method was used between 20-50?C temperatures. Density and specific heat values are obtained with the help of the well-known equations while thermal conductivity and viscosity are measured. Thanks to this study, it is emphasized how thermophysical properties of nanofluids change according to temperature and volumetric concentration. Moreover, their curve fitting equations are obtained. All of the thermophysical properties compared with the studies in the literature. It is established that the thermal conductivity of nanofluids is proportional to temperature, and viscosity of it is proportional to volumetric concentrations but inversely with temperature. Finally, the effects of the augmentation in dynamic viscosity on pumping power were considered as well as the increase in thermal conductivity; thus, no abnormal heat transfer enhancement was observed.

Thermal Conductivity Enhancement of Aluminium Oxide Nanofluid in Ethylene Glycol

2014 ◽  
Vol 660 ◽  
pp. 730-734 ◽  
Author(s):  
Khamisah Abdul Hamid ◽  
Wan Hamzah Azmi ◽  
Rizalman Mamat ◽  
Nur Ashikin Usri
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Thermal Properties ◽  
Ethylene Glycol ◽  
Volume Concentration ◽  
Conductivity Measurement ◽  
Thermal Conductivity Enhancement ◽  
Heat Transfer Fluid ◽  
Coolant Fluid ◽  
Conductivity Enhancement

Nanofluids are the new coolant fluid that has been widely investigates due to its ability to improved heat transfer better than conventional heat transfer fluid. The need to study the nanofluid properties has been increased to provide better understanding on nanofluid thermal properties and behavior. This study presents the measurement analysis on thermal conductivity enhancement of Al2O3 nanoparticles dispersed in ethylene glycol. The nanofluids are prepared using two step method for volume concentration range from 1.0 % to 4.0 %. The thermal conductivity measurement of the nanofluid is performed by KD2 Pro Thermal Properties Analyzer at working temperature range from 30 °C to 80 °C. The maximum enhancement in thermal conductivity is 21.1 % at volume concentration of 2.0 % and temperature of 70 °C. The results show that the thermal conductivity increases with the increase of nanofluid concentration and temperature. Also, the nanofluid shows enhancement in thermal conductivity compare to the base fluid.

Enhanced Thermal Performance of Ionic Liquid-Al2O3 Nanofluid as Heat Transfer Fluid for Solar Collector

2013 ◽  
Author(s):  
Titan C. Paul ◽  
A. K. M. M. Morshed ◽  
Elise B. Fox ◽  
Ann E. Visser ◽  
Nicholas J. Bridges ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Capacity ◽  
Ionic Liquids ◽  
Thermal Performance ◽  
Thermophysical Properties ◽  
Heat Transfer Fluid ◽  
Al2o3 Nanoparticles ◽  
Diphenyl Oxide ◽  
Volume Percentage

Next generation Concentrating Solar Power (CSP) system requires high operating temperature and high heat storage capacity heat transfer fluid (HTF), which can significantly increase the overall system efficiency for power generation. In the last decade several research going on the efficacy of ionic liquids (ILs) as a HTF in CSP system. ILs possesses superior thermophysical properties compare to currently using HTF such as Therminol VP-1 (mixture of biphenyl and diphenyl oxide) and thermal oil. However, advanced thermophysical properties of ILs can be achieved by dispersing small volume percentage of nanoparticles forming nanofluids, which is called Nanoparticle Enhanced Ionic Liquids (NEILs). In the present study NEILs were prepared by dispersing 0.5% Al2O3 nanoparticles (spherical and whiskers) in N-butyl-N, N, N-trimetylammonium bis(trifluormethylsulfonyl)imide ([N4111][NTf2]) IL. Viscosity, heat capacity and thermal conductivity of NEILs were measured experimentally and compared with the existing theoretical models for liquid–solid suspensions. Additional, the convective heat transfer experiment was performed to investigate thermal performance. The thermal conductivity of NEILs enhanced by ∼5%, heat capacity enhanced by ∼20% compared to the base IL, which also gives 15% enhancement in heat transfer performance.

Thermal Conductivity Enhancement by Adding Nanoparticles to Ionic Liquids

2017 ◽  
Vol 261 ◽  
pp. 121-126 ◽  
Author(s):  
Alina Adriana Minea ◽  
Madalina Georgiana Moldoveanu ◽  
Oana Dodun
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Ionic Liquid ◽  
Ionic Liquids ◽  
Thermophysical Properties ◽  
Base Fluid ◽  
Thermal Conductivity Enhancement ◽  
Conductivity Enhancement ◽  
New Class ◽  
Enhanced Thermal Conductivity

Ionanofluids are a very new class of nanofluids having ionic liquids as the base fluid. Thermophysical properties of base ionic liquids (ILs) and nanoparticle enhanced ionic liquids (NEILs) are part of studying a new class of fluids for heat transfer. NEILs are formed by dispersing different volume fractions of nanoparticles in a base ionic liquid. In this article, only the thermal conductivity enhancement was considered for comparison of the different ionanofluids. NEILs show enhanced thermal conductivity compared to the base ILs. Maximum thermal conductivity enhancement was observed by adding 1 % MWCNT to [C4mim][(CF3SO2)2N] ionic liquid. However, if 0.05% MWCNT are added to [(C6)3PC14)][NTf2] no enhancement in thermal conductivity was noticed.

MXene Based Palm Oil Methyl Ester as an Effective Heat Transfer Fluid

2021 ◽  
Vol 68 ◽  
pp. 17-34
Author(s):  
Dieter Rahmadiawan ◽  
Navid Aslfattahi ◽  
N. Nasruddin ◽  
Rahman Saidur ◽  
A. Arifutzzaman ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Methyl Ester ◽  
Physical Properties ◽  
Palm Oil ◽  
Base Fluid ◽  
Heat Transfer Fluid ◽  
Maximum Enhancement ◽  
First Time ◽  
Thermo Physical Properties

In this research, MXene (Ti3C2) nanoflakes are implanted for the first time with Palm oil methyl ester (POME) to improve the nanofluids (POME/MXene) thermo-physical properties. The preparation, characterization, thermal and rheological properties was evaluated. POME/MXene nanofluid was induced with five different concentrations (0.01, 0.03, 0.05, 0.08, and 0.1 wt.%) of MXene to achieve the optimal properties that would be superior for a new heat transfer fluid. It is found that introducing more MXene nanoflakes into POME would expand the thermo-physical properties which will induce the rapid cooling of MXene based-nanofluids. Maximum enhancement of thermal conductivity for a MXene concentration and temperature of 0.1 wt.% and 65 oC respectively was measured to be ~ 176 % compared to the base fluid. Increasing amount of MXene did not effect the viscosity of the nanofluid. These results enable it to be utilized as a promising heat transfer fluid.

Sign in / Sign up

Export Citation Format

Share Document