scholarly journals Enhanced Photocatalytic Degradation of the Imidazolinone Herbicide Imazapyr upon UV/Vis Irradiation in the Presence of CaxMnOy-TiO2 Hetero-Nanostructures: Degradation Pathways and Reaction Intermediates

Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 896 ◽  
Author(s):  
Salma Bougarrani ◽  
Preetam K. Sharma ◽  
Jeremy W. J. Hamilton ◽  
Anukriti Singh ◽  
Moisés Canle ◽  
...  
Keyword(s):  
Photocatalytic Degradation ◽  
Environmental Remediation ◽  
Irradiation Time ◽  
Radical Scavenger ◽  
Degradation Pathways ◽  
Reaction Intermediates ◽  
Mechanical Grinding ◽  
Polar Species

The determination of reaction pathways and identification of products of pollutants degradation is central to photocatalytic environmental remediation. This work focuses on the photocatalytic degradation of the herbicide Imazapyr (2-(4-methyl-5-oxo-4-propan-2-yl-1H-imidazol-2-yl) pyridine-3-carboxylic acid) under UV-Vis and visible-only irradiation of aqueous suspensions of CaxMnOy-TiO2, and on the identification of the corresponding degradation pathways and reaction intermediates. CaxMnOy-TiO2 was formed by mixing CaxMnOy and TiO2 by mechanical grinding followed by annealing at 500 °C. A complete structural characterization of CaxMnOy-TiO2 was carried out. The photocatalytic activity of the hetero-nanostructures was determined using phenol and Imazapyr herbicide as model pollutants in a stirred tank reactor under UV-Vis and visible-only irradiation. Using equivalent loadings, CaxMnOy-TiO2 showed a higher rate (10.6 μM·h−1) as compared to unmodified TiO2 (7.4 μM·h−1) for Imazapyr degradation under UV-Vis irradiation. The mineralization rate was 4.07 µM·h−1 for CaxMnOy-TiO2 and 1.21 μM·h−1 for TiO2. In the CaxMnOy-TiO2 system, the concentration of intermediate products reached a maximum at 180 min of irradiation that then decreased to a half in 120 min. For unmodified TiO2, the intermediates continuously increased with irradiation time with no decrease observed in their concentration. The enhanced efficiency of the CaxMnOy-TiO2 for the complete degradation of the Imazapyr and intermediates is attributed to an increased adsorption of polar species on the surface of CaxMnOy. Based on LC-MS, photocatalytic degradation pathways for Imazapyr under UV-Vis irradiation have been proposed. Some photocatalytic degradation was obtained under visible-only irradiation for CaxMnOy-TiO2. Hydroxyl radicals were found to be main reactive oxygen species responsible for the photocatalytic degradation through radical scavenger investigations.

scholarly journals Synthesis and characterization of ternary chitosan–TiO2–ZnO over graphene for photocatalytic degradation of tetracycline from pharmaceutical wastewater

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Hossein Asadzadeh Patehkhor ◽  
Moslem Fattahi ◽  
Mohammadreza Khosravi-Nikou
Keyword(s):  
Photocatalytic Degradation ◽  
Irradiation Time ◽  
Sol Gel ◽  
Weight Ratio ◽  
Molar Ratio ◽  
Operational Parameters ◽  
Pharmaceutical Wastewater ◽  
Operational Conditions ◽  
Molar Ratios

AbstractVarious nanocomposites of TiO2–ZnO, TiO2–ZnO/CS, and TiO2–ZnO/CS–Gr with different molar ratios were synthesized by sol–gel and ultrasound-assisted methods and utilized under UV irradiation to enhance the photocatalytic degradation of tetracycline. Characterization of prepared materials were carried out by XRD, FT-IR, FE-SEM, EDX and BET techniques. The TiO2–ZnO with the 1:1 molar ratio supported with 1:2 weight ratio CS–Gr (T1‒Z1/CS1‒Gr2 sample) appeared as the most effective material at the optimized operational conditions including the tetracycline concentration of 20 mg/L, pH = 4, catalyst dosage of 0.5 g/L, and 3 h of irradiation time. As expected, the graphene had a significant effect in improving degradation results. The detailed performances of the T1‒Z1/CS1‒Gr2 were compared with ternary nanocomposites from EDX and BET results as well as from the degradation viewpoint. This novel photocatalyst can be effective in actual pharmaceutical wastewater treatment considering the applied operational parameters.

Characterization of Impressed Current Technique to Model Corrosion of Reinforcement in Concrete

2020 ◽  
Vol 11 (1) ◽  
pp. 93-99
Author(s):  
Abu Zakir Morshed ◽  
Sheikh Shakib ◽  
Tanzim Jahin
Keyword(s):  
Immersion Time ◽  
Chloride Content ◽  
Engineering Science ◽  
Coastal Regions ◽  
Faraday’S Law ◽  
Current Technique ◽  
Corrosion Cell ◽  
Impressed Current

Corrosion of reinforcement is an important durability concern for the structures exposed to coastal regions. Since corrosion of reinforcement involves long periods of time, impressed current technique is usually used to accelerate the corrosion of reinforcement in laboratories. Characterization of impressed current technique was the main focus of this research,which involved determination of optimum chloride content and minimum immersion time of specimens for which the application of Faraday’s law could be efficient. To obtain optimum chloride content, the electrolytes in the corrosion cell were prepared similar to that of concrete pore solutions. Concrete prisms of 200 mm by 200 mm by 300 mm were used to determine the minimum immersion time for saturation. It was found that the optimum chloride content was 35 gm/L and the minimum immersion time for saturation was 140 hours. Accounting the results, a modified expression based on Faraday’s law was proposed to calculate weight loss due to corrosion. Journal of Engineering Science 11(1), 2020, 93-99

The Determination of Sense via Deleuze and Blanchot: Paradoxes of the Habitual, the Immemorial, and the Eternal Return

2008 ◽  
Vol 2 (2) ◽  
pp. 155-177 ◽  
Author(s):  
Eugene Brently Young
Keyword(s):  
Eternal Return

Eternal return is the paradox that accounts for the interplay between difference and repetition, a dynamic at the heart of Deleuze's philosophy, and Blanchot's approach to this paradox, even and especially through what it elides, further illuminates it. Deleuze draws on Blanchot's characterisations of difference, forgetting, and the unlivable to depict the ‘sense’ produced via eternal return, which, for Blanchot, is where repetition implicates or ‘carries’ pure difference. However, for Deleuze, difference and the unlivable are also developed by the living repetition or ‘contraction’ of habit, which results in his distinctive characterization of ‘force’, ‘levity’, and sense in eternal return.

SEM/EDS Characterization of Uncommon Metal Whiskers and Determination of Underlying Growth Mechanisms

2018 ◽  
Author(s):  
D. Basak ◽  
L. H. Ponce
Keyword(s):  
Reliability Analysis ◽  
Case Studies ◽  
Whisker Growth ◽  
Innovation Systems ◽  
Growth Mechanisms ◽  
Crystal Oscillator ◽  
Analysis Laboratory ◽  
Investigative Techniques

Abstract Two case-studies on uncommon metals whiskers, performed at the Reliability Analysis Laboratory (RAL) of Northrop Grumman Innovation Systems, are presented. The components analyzed are an Oven Controlled Crystal Oscillator (OCXO) and an Electromechanical Relay. Investigative techniques were used to determine the chemical and physical makeup of the metal whiskers and develop an understanding of the underlying effects and mechanisms that caused the conditions conducive to whisker growth.

Sign in / Sign up

Export Citation Format

Share Document