scholarly journals Moisture Absorption Effects on the Mechanical Properties of Sandwich Biocomposites with Cork Core and Flax/PLA Face Sheets

Molecules ◽  
2021 ◽  
Vol 26 (23) ◽  
pp. 7295
Author(s):  
Hom Nath Dhakal ◽  
Chulin Jiang ◽  
Moumita Sit ◽  
Zhongyi Zhang ◽  
Moussa Khalfallah ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Failure Modes ◽  
Moisture Absorption ◽  
Mechanical Performance ◽  
Core Sample ◽  
Environmental Benefits ◽  
Matrix Cracking ◽  
Core Material ◽  
Poly Lactic Acid ◽  
The Core

The aim of this study was to evaluate the moisture absorption behaviour and its influence on the mechanical properties of newly developed sandwich biocomposites with flax fibre-reinforced poly-lactic acid (PLA) face sheets and soft cork as the core material. Three different types of sandwich biocomposite laminates comprised of different layup configurations, namely, non-woven flax/PLA (Sample A), non-woven flax/PLA and cork as core (Sample B) and non-woven flax/paper backing/PLA, cork as core (Sample C), were fabricated. In order to evaluate the influence of moisture ingress on the mechanical properties, the biocomposites were immersed in seawater for a period of 1200 h. The biocomposites (both dry and water immersed) were then subjected to tensile, flexural and low-velocity falling weight impact tests. It was observed from the experimental results that the moisture uptake significantly influenced the mechanical properties of the biocomposites. The presence of the cork and paper in sample C made it more susceptible to water absorption, reaching a value of 34.33%. The presence of cork in the core also has a considerable effect on the mechanical, as well as energy dissipation, behaviours. The results of sample A exhibited improved mechanical performance in both dry and wet conditions compared to samples B and C. Sample A exhibits 32.6% more tensile strength and 81.4% more flexural strength in dry conditions than that in sample C. The scanning electron microscopy (SEM) and X-ray micro-CT images revealed that the failure modes observed are a combination of matrix cracking, core crushing and face core debonding. The results from this study suggest that flax/PLA sandwich biocomposites can be used in various lightweight applications with improved environmental benefits.

An Experimental Analysis of Bending Behavior of Sandwich Constructions for Transport Industry

2016 ◽  
Vol 827 ◽  
pp. 61-64
Author(s):  
Ladislav Fojtl ◽  
Soňa Rusnáková ◽  
Milan Žaludek ◽  
Vladimír Rusnák
Keyword(s):  
Experimental Analysis ◽  
Failure Modes ◽  
Mechanical Performance ◽  
Core Material ◽  
The Core ◽  
Transport Industry ◽  
Bending Behavior ◽  
The Impact ◽  
Environmental Temperatures ◽  
Sandwich Constructions

In this work the mechanical performance of various sandwich constructions with respect to core material were experimentally evaluated. Sandwich structures were made of glass prepreg and three types of plastic core using vacuum bagging, technology traditionally used for production of parts for transport industry. The aim of this study is to analyze the impact of the core material type and its thickness on bending behavior at different environmental temperatures. Moreover, the effect of core layers compared to one layer core of same thickness was determined. Conducted research provided useful information of bending behavior and showed specific failure modes of individual sandwich constructions.

scholarly journals Microstructure and Mechanical Performance of Resistance Spot Welded Martensitic Advanced High Strength Steel

Processes ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 1021
Author(s):  
Yunzhao Li ◽  
Huaping Tang ◽  
Ruilin Lai
Keyword(s):  
Mechanical Properties ◽  
Failure Modes ◽  
Mechanical Performance ◽  
Strong Dependence ◽  
High Strength ◽  
Weld Nugget ◽  
Resistance Spot ◽  
Pull Out ◽  
Cross Tension ◽  
Spot Welded

Resistance spot welded 1.2 mm (t)-thick 1400 MPa martensitic steel (MS1400) samples are fabricated and their microstructure, mechanical properties are investigated thoroughly. The mechanical performance and failure modes exhibit a strong dependence on weld-nugget size. The pull-out failure mode for MS1400 steel resistance spot welds does not follow the conventional weld-nugget size recommendation criteria of 4t0.5. Significant softening was observed due to dual phase microstructure of ferrite and martensite in the inter-critical heat affected zone (HAZ) and tempered martensite (TM) structure in sub-critical HAZ. However, the upper-critical HAZ exhibits obvious higher hardness than the nugget zone (NZ). In addition, the mechanical properties show that the cross-tension strength (CTS) is about one quarter of the tension-shear strength (TSS) of MS1400 weld joints, whilst the absorbed energy of cross-tension and tension-shear are almost identical.

scholarly journals Effect of weld nugget size on failure mode and mechanical properties of microscale resistance spot welds on Ti–1Al–1Mn ultrathin foils

2018 ◽  
Vol 10 (7) ◽  
pp. 168781401878528 ◽  
Author(s):  
Feng Chen ◽  
Shiding Sun ◽  
Zhenwu Ma ◽  
GQ Tong ◽  
Xiang Huang
Keyword(s):  
Mechanical Properties ◽  
Failure Mode ◽  
Failure Modes ◽  
Mechanical Performance ◽  
Weld Nugget ◽  
Interfacial Failure ◽  
Spot Welds ◽  
Resistance Spot ◽  
Resistance Spot Welds ◽  
Pullout Failure

We use tensile–shear tests to investigate the failure modes of Ti–1Al–1Mn microscale resistance spot welds and to determine how the failure mode affects the microstructure, microhardness profile, and mechanical performance. Two different failure modes were revealed: interfacial failure mode and pullout failure mode. The welds that fail by pullout failure mode have much better mechanical properties than those that fail by interfacial failure mode. The results show that weld nugget size is also a principal factor that determines the failure mode of microscale resistance spot welds. A minimum weld nugget size exists above which all specimens fail by pullout failure mode. However, the critical weld nugget sizes calculated using the existing recommendations are not consistent with the present experimental results. We propose instead a modified model based on distortion energy theory to ensure pullout failure. Calculating the critical weld nugget size using this model provides results that are consistent with the experimental data to high accuracy.

scholarly journals Spinnability and characteristics of polyoxymethylene-based core–sheath bicomponent fibers

2019 ◽  
Vol 14 ◽  
pp. 155892501985944
Author(s):  
Jitlada Boonlertsamut ◽  
Supaphorn Thumsorn ◽  
Toshikazu Umemura ◽  
Hiroyuki Hamada ◽  
Atsushi Sakuma
Keyword(s):  
Lactic Acid ◽  
Structural Characteristics ◽  
Core Material ◽  
Poly Lactic Acid ◽  
Bicomponent Fibers ◽  
Fiber Properties ◽  
The Core ◽  
The Impact ◽  
Fiber Processing ◽  
Selection Of

In this work, the spinning abilities of polyoxymethylene-based core–sheath bicomponent fibers were investigated. Bicomponent fibers were prepared using polyoxymethylene as the core material and poly(lactic acid) blended with polyoxymethylene or pure polyoxymethylene as sheath materials, and their characteristics were investigated and compared. Fiber properties such as elongation are important because they directly relate to the spinning performance during fiber processing. This work reports the impact of the composition designation of the core–sheath bicomponent fibers on the controllable stability of poly(lactic acid) in polyoxymethylene–poly(lactic acid) blends in the fibers, as well as the influence of the core–sheath material on the structure, fiber diameter and distribution, thermal stability, and mechanical properties of the core–sheath bicomponent fibers. It was found that the selection of core and sheath materials affected the structural characteristics of the fibers. The polyoxymethylene core–polyoxymethylene sheath (FV) fiber showed dimensional stability. However, the polyoxymethylene core–poly(lactic acid)/polyoxymethylene sheath (FT30) fiber provided the optimum limit of poly(lactic acid) content for controlling the stable properties of the core–sheath bicomponent fibers.

Mechanical and Thermal Properties of PLA Melt Blended with High Molecular Weight PEG Modified with Peroxide and Organo-Clay

2017 ◽  
Vol 751 ◽  
pp. 337-343 ◽  
Author(s):  
Chanchai Thongpina ◽  
Chaiwat Tippuwanan ◽  
Kwanchai Buaksuntear ◽  
Teerani Chuawittayawuta
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Molecular Weight ◽  
High Molecular Weight ◽  
Mechanical Performance ◽  
Organic Peroxide ◽  
Degree Of Crystallinity ◽  
Poly Lactic Acid ◽  
Mechanical And Thermal Properties ◽  
Cloisite 30B

The thermal and mechanical properties of poly (lactic acid) blended with high molecular weight PEG, i.e. PEG1000 and PEG6000 were compared. The contents of PEG added were 10, 12.5 and 15 % by weight, with respect to PLA. The PLA/PEG blends were modified by addition of organic peroxide in order to induced crosslinking. Addition of organic modified montmorrillonite (Cloisite 30B, C30B) was also performed in order to modify mechanical performance of PLA/PEG blends. C30B was prepared via master batch in PLA. Morphology, crystallization, thermal stability and mechanical properties of the blends were investigated using SEM, DSC, TGA and universal testing macine, respectively. Morphology of cryogenic fracture surface showed smooth brittle surface. PEG1000 well plasticized PLA where as PEG6000 shows better thermal stability and mechanical properties. The presence of PEG induced PLA to perform cold crystallization. Tm in PLA was slightly changed whereas degree of crystallinity of PLA was improved by PEG but slightly decreased by peroxide. The thermal stability of PLA was enhanced with the addtion of PEG6000. The toughening of PLA was confirmed by the increment of elongation at break. The exfoliation of C30B was interfered by the crosslink PLA. Then tensile strength of PLA/PEG/C30B/Luperox101 was then suppressed. The optimum properties, in term of toughening and thermal stability, were found at PEG content of 10 % rather than 15% by weight, for both PEG1000 and PEG6000.

scholarly journals Evaluation of the mechanical characteristics of hygrothermally aged 2-D basalt-aramid/epoxy hybrid interply composites

2021 ◽  
Vol 2070 (1) ◽  
pp. 012234
Author(s):  
Yogeesha Pai ◽  
Dayananda Pai K ◽  
M Vijaya Kini
Keyword(s):  
Mechanical Properties ◽  
Moisture Absorption ◽  
Mechanical Performance ◽  
Mechanical Tests ◽  
Moisture Uptake ◽  
Molding Process ◽  
Micro Cracks ◽  
Different Types ◽  
Temperature Ageing ◽  
Saturation Absorption

Abstract Polymer composites used in outdoor applications are exposed to environmental factors such as temperature and moisture which may affect the mechanical performance of the composites. In this study, the influence of moisture absorption on the mechanical properties of basalt-aramid/epoxy hybrid interply composites were evaluated. Two different types hybrid interply composites were taken for the investigation namely (301 A/03 B/301 A) and (451 A/03B/451 A). Composites were prepared using compression molding process and cut specimens were subjected to three different ageing environments for 180 days. Selected ageing conditions are, (i) ambient temperature ageing (ii) Sub-zero temperature ageing (−10°C) and (iii) Humid temperature ageing (40°C and 60% Relative humidity). Mechanical tests of the aged composites were carried out to analyse the behaviour of the composites. Moisture uptake of the specimens follow Fick’s law of diffusion with saturation absorption of 5.44%, 3.12% and 1.80% for ambient, sub-zero and humid specimens respectively. Results revealed that (301 a/03 B/301 a) aged composites possess higher mechanical properties compared to (451 a/03 B/451 a) aged composites. Highest reduction in properties were observed in ambient aged specimens followed by humid and sub-zero specimens. Scanning electron microscopy (SEM) was employed to observe the damage modes of the fractured specimens. Matrix deterioration, micro cracks and fibre fracture were the major types of failures observed in aged laminates.

Effect of various enzymatic treatments on the mechanical properties of coir fiber/poly(lactic acid) biocomposites

2019 ◽  
pp. 089270571986461
Author(s):  
Kubra Coskun ◽  
Aysenur Mutlu ◽  
Mehmet Dogan ◽  
Ebru Bozacı
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Mechanical Performance ◽  
Mechanical Analysis ◽  
Poly Lactic Acid ◽  
Coir Fiber ◽  
Test Results ◽  
Fiber Reinforced ◽  
Remarkable Effect ◽  
The Impact

The effects of enzymatic treatments on the properties of coir fiber-reinforced poly(lactic acid) (PLA) were not found in the literature. Accordingly, the effects of various enzymatic treatments on the mechanical performance of the coir fiber-reinforced PLA composites were investigated in the current study. Four different enzymes, namely lipase, lactase, pectinase, and cellulase, were used. The mechanical properties of the composites were determined by the tensile, flexural, impact tests, and dynamic mechanical analysis. According to the test results, the use of enzyme treated coir fibers affected the mechanical properties except for the flexural properties with different extents depending upon their type. The tensile strength increased with the treatments of lipase and lactase, while the treatments with pectinase and cellulase had no remarkable effect. The impact strength was improved with enzymatic treatments except for pectinase. All enzymatic treatments improved the elastic modulus below the glass transition temperature. In brief, enzymatic treatments improved the interfacial adhesion between coir fiber and PLA via the waxes and fatty acids removal and/or the increment in surface roughness.

scholarly journals Core failure in sandwich structures subjected to water slamming loads

2019 ◽  
Vol 21 (5) ◽  
pp. 1751-1772
Author(s):  
MA Battley ◽  
TD Allen
Keyword(s):  
Transverse Shear ◽  
High Speed ◽  
Failure Modes ◽  
Sandwich Panels ◽  
Core Material ◽  
Polymeric Foams ◽  
Failure Mechanics ◽  
The Core ◽  
High Elongation ◽  
Core Materials

Sandwich composite materials are widely used within the marine industry, particularly as hull panels. Water impact loads, known as slamming, can be very significant for these structures, particularly for high-speed craft. These loadings generate local regions of high transverse shear forces near panel boundaries, which can result in transverse shear failures of core materials. The transient nature of slamming loads can cause stress rates that are high enough to affect the strength of the core material, particularly for polymeric foams. Despite the significant body of work on the constitutive behaviour and failure mechanics of sandwich core materials, there is a lack of understanding of how core materials fail in transverse shear during slamming events. There is also only very limited knowledge of how the core shear strengths measured using standardised, often quasi-static material coupon testing relate to their behaviour in a panel-slamming situation. This paper contributes in two novel areas; controlled experimental characterisation of the failure mechanics of sandwich panels subjected to water slamming to understand and quantify the strength of different polymeric core materials, comparison of the failure modes and transverse shear strength of slam-loaded sandwich panels to predictions from material coupon properties. Core types include low, medium and high elongation polymeric foams. The results demonstrate that the more ductile foams perform better as panel structures under slamming relative to their quasi-static properties compared with the more brittle cores. Prediction of the strength of a panel is shown to be highly dependent on the load distribution and whether the static or dynamic core strength is considered. The results support empirical experience that ductile foams perform well under slamming loads, and that high-elongation materials can perform better in slamming situations than predicted by their quasi-static strengths.

scholarly journals Mechanical Performance and Moisture Absorption of Unidirectional Bamboo Fiber Polyester Composite

2018 ◽  
Vol 911 ◽  
pp. 88-94 ◽  
Author(s):  
Omid Nabinejad ◽  
Sujan Debnath ◽  
Jack Kai Beh ◽  
Mohammad Yeakub Ali
Keyword(s):  
Mechanical Properties ◽  
Moisture Absorption ◽  
Mechanical Performance ◽  
Natural Fiber ◽  
Alkali Treatment ◽  
Bamboo Fiber ◽  
Synthetic Fiber ◽  
Moisture Uptake ◽  
Polyester Composite ◽  
Bamboo Fibers

Bamboo fibers as a natural fiber offer numerous advantages such as high specific strength over synthetic fiber when used as reinforcing fiber for polymer composites. Yet the hydrophilic nature of bamboo fibers with high moisture absorption results in incompatibility in between bamboo fibers and unsaturated polyester resin. An experimental study was carried out to investigate the effects of alkali treatment of bamboo fiber on the mechanical properties and water sorption properties of polyester composite. The result revealed that, the bamboo fiber polyester composite with 5% Alkali treated bamboo fiber possesses the highest mechanical properties. Besides, Alkali treated fibers composite showed a significant reduction in moisture uptake compared to untreated fibers, where composite with 7% Alkali treated showed the lowest moisture uptake.

scholarly journals Study on the Dynamic Mechanical Properties of Viscoelastic Materials Based on Asymmetrical Sandwich Beams

2018 ◽  
Vol 8 (8) ◽  
pp. 1359 ◽  
Author(s):  
Qingqing Wu ◽  
Minqing Wang
Keyword(s):  
Mechanical Properties ◽  
Dynamic Properties ◽  
Estimation Method ◽  
Dynamic Mechanical Properties ◽  
Test Method ◽  
Core Material ◽  
Beam Specimen ◽  
Viscoelastic Materials ◽  
Dynamic Mechanical ◽  
The Core

A modified estimation method for the dynamic mechanical properties of viscoelastic materials via asymmetrical sandwich specimens is presented. In contrast to the traditional vibrating cantilever beam test method (VCBTM), the proposed method allows asymmetrical base beams in sandwich specimens. Based on the complex stiffness method, complex parameters are introduced for general sandwich configurations. Calculation formulas for loss factor and shear modulus of the core material are presented. The effectiveness of this approach is validated numerically and experimentally by analysis of one symmetrical sandwich beam specimen and two specimens with asymmetrical thicknesses and materials. It is shown that dynamic mechanical parameters of the core material can be obtained regardless of sandwiches’ symmetry. The proposed method breaks the symmetrical criteria for sandwich specimens and may provide a wider application to measure viscoelastic materials’ dynamic properties.

Sign in / Sign up

Export Citation Format

Share Document