scholarly journals Microbial Sensing and Removal of Heavy Metals: Bioelectrochemical Detection and Removal of Chromium(VI) and Cadmium(II)

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2549
Author(s):  
Reham A. Alfadaly ◽  
Ashraf Elsayed ◽  
Rabeay Y. A. Hassan ◽  
Ahmed Noureldeen ◽  
Hadeer Darwish ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Toxic Metal ◽  
Metal Exposure ◽  
Chromium Vi ◽  
Electrochemically Active ◽  
Removal Of Heavy Metals ◽  
Electrochemically Active Biofilm ◽  
Heavy Metals Ions ◽  
Susceptible Organism ◽  
Complementary Strategy

The presence of inorganic pollutants such as Cadmium(II) and Chromium(VI) could destroy our environment and ecosystem. To overcome this problem, much attention was directed to microbial technology, whereas some microorganisms could resist the toxic effects and decrease pollutants concentration while the microbial viability is sustained. Therefore, we built up a complementary strategy to study the biofilm formation of isolated strains under the stress of heavy metals. As target resistive organisms, Rhizobium-MAP7 and Rhodotorula ALT72 were identified. However, Pontoea agglumerans strains were exploited as the susceptible organism to the heavy metal exposure. Among the methods of sensing and analysis, bioelectrochemical measurements showed the most effective tools to study the susceptibility and resistivity to the heavy metals. The tested Rhizobium strain showed higher ability of removal of heavy metals and more resistive to metals ions since its cell viability was not strongly inhibited by the toxic metal ions over various concentrations. On the other hand, electrochemically active biofilm exhibited higher bioelectrochemical signals in presence of heavy metals ions. So by using the two strains, especially Rhizobium-MAP7, the detection and removal of heavy metals Cr(VI) and Cd(II) is highly supported and recommended.

scholarly journals Reproductive toxicity of heavy metals in fallow deer in vitro

2021 ◽  
Vol 90 (3) ◽  
pp. 277-286
Author(s):  
Ehdaa Eltayeb Eltigani Abdelsalam ◽  
Hana Banďouchová ◽  
Tomáš Heger ◽  
Miroslava Kaňová ◽  
Kateřina Kobelková ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Sertoli Cells ◽  
Reproductive Toxicity ◽  
Toxic Metal ◽  
Fallow Deer ◽  
Ovarian Follicles ◽  
Metal Exposure ◽  
Lipid Hydroperoxides ◽  
Single Strand Break

Sertoli cells play a crucial role in male fertility through boosting and regulating the differentiation of spermatogonial stem cells into mature sperm during spermatogenesis. Female ovarian follicles are responsible for the production of mature ova and control of ovarian steroidogenesis. Disruption of these structures through exposure to environmental pollutants is critical for reproductive health. Here, we derived primary cell cultures of Sertoli cells and ovarian follicles from fallow deer (Dama dama). Cells were used as in vitro models to explore reproductive toxicity of heavy metals in wild species. Adverse effects of cadmium (CdCl2), methylmercury (MeHgCl2), and lead (PbCl2) were investigated through a range of equal molar concentrations (0, 15, 30, 60, 125, 250 µM). We found both concentration-dependent and independent cytotoxic patterns (P < 0.01, P < 0.05) in cells exposed to CdCl2, MeHgCl2, and PbCl2. Based on generation of lipid hydroperoxides, significant levels of cell oxidative perturbation were detected in the CdCl2 (P = 0.0001), PbCl2 (P = 0.001), and MeHgCl2 (P = 0.003) groups. Likewise, the antioxidant enzymes catalase and glutathione peroxidase were inhibited in all metal-treated groups (P < 0.01). Genotoxic DNA damage (single-strand break) was also observed (MeHgCl2 group, P = 0.002; CdCl2 and PbCl2 groups, P = 0.004). Increased activity of superoxide dismutase (P = 0.0002 and P = 0.01) was observed in MeHgCl2 and CdCl2, respectively. Cell apoptosis was detected in all the PbCl2 and CdCl2 (P = 0.00007) and MeHgCl2 (P = 0.001) groups. The results of this study can be used to characterize the responsiveness of fallow deer gonadal cells to the stress of toxic metal exposure.

scholarly journals The Novel Use of Saraca thaipingensis Leaf Powder as Potential Biosorbent Material for the Removal of Chromium(VI)

2015 ◽  
Vol 3 (3) ◽  
pp. 35-39
Author(s):  
Sannasi Palsan ◽  
Chai Swee Fern ◽  
Stephanie Bernardine ◽  
Lim Fan Shiang
Keyword(s):  
Heavy Metals ◽  
Particle Size ◽  
Contact Time ◽  
Low Cost ◽  
Peninsular Malaysia ◽  
The Novel ◽  
Batch Experiments ◽  
Chromium Vi ◽  
Removal Of Heavy Metals ◽  
Leaf Powder

Saraca thaipingensis or ‘Gapis’ tree, classified under the Fabaceae family is a native of Taiping; copious over Peninsular Malaysia and Southeast Asia. The withered and fallen dead leaves were collected from INTI International University’s garden walkway. To date, literature has yet to capture the use of S. thaipingensis tree parts or refuse as potential biosorbent material for the removal of heavy metals thus verifying the novelty of this study. Batch experiments were carried out with the leaf powder to study the effects of dosage, particle size and contact time towards Cr(VI) removal (%) at 1-100 mg/L. Results showed that Cr(VI) removal increased from 52.22% to 99.31% (p < 0.05) with increase in biosorbent dosage (0.005, 0.010, 0.015, 0.020, 0.025 and 0.050 g). The different particle size ranges tested were: 107-125, 126-150, 151-250, 251-500, and 501- 1000 ?m. Highest Cr(VI) removal of 99.53% was obtained with the 151-250 ?m particle size; further size decrease did not yield more removal (p > 0.05). The optimal Cr(VI) removal was recorded after 45 min (99.62%) and 90 min (99.76%) contact time (p > 0.05). Further characterization and optimization studies are being carried out to develop a novel, sustainable, low cost yet effective leaf powder based biosorbent material.

Sequential removal of heavy metals ions and organic pollutants using an algal-bacterial consortium

Chemosphere ◽  
2006 ◽  
Vol 63 (6) ◽  
pp. 903-911 ◽  
Author(s):  
Raul Muñoz ◽  
Maria Teresa Alvarez ◽  
Adriana Muñoz ◽  
Enrique Terrazas ◽  
Benoit Guieysse ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Organic Pollutants ◽  
Bacterial Consortium ◽  
Removal Of Heavy Metals ◽  
Heavy Metals Ions

scholarly journals Synthesis of Fe3O4@PVBC–TMT nanoparticles for the efficient removal of heavy metals ions

RSC Advances ◽  
2019 ◽  
Vol 9 (69) ◽  
pp. 40546-40552 ◽  
Author(s):  
Zhiming Chen ◽  
Jiaojiao Song ◽  
Qingpeng Zhu ◽  
Zhiguo Li ◽  
Renchun Yang
Keyword(s):  
Heavy Metals ◽  
Core Shell ◽  
Magnetic Adsorbent ◽  
Efficient Removal ◽  
Removal Of Heavy Metals ◽  
Heavy Metals Ions

Core–shell Fe3O4@PVBC–TMT nanoparticles were fabricated and served as a valid magnetic adsorbent for the removal of heavy metals ions.

Functionalized Magnetic Nanoparticles for Environmental Remediation

2017 ◽  
pp. 705-741
Author(s):  
Ravindra Kumar Gautam ◽  
Shivani Soni ◽  
Mahesh Chandra Chattopadhyaya
Keyword(s):  
Heavy Metals ◽  
Magnetic Nanoparticles ◽  
Environmental Remediation ◽  
Anthropogenic Activities ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Toxic Metal ◽  
Volume Ratio ◽  
Removal Of Heavy Metals

Water pollution by anthropogenic activities is proving to be of critical concern as the heavy metals affect aquatic organisms and can quickly disperse to large distances. This poses a risk to both human health and the aquatic biota. Hence, there is a need to treat the wastewater containing toxic metals before they are discharged into the water bodies. During recent years, magnetic nanoparticles came to the foreground of scientific interest as a potential adsorbent of novel wastewater treatment processes. Magnetic nanoparticles have received much attention due to their unique properties, such as extremely small size, high surface-area-to-volume ratio, surface modifiability, multi functionality, excellent magnetic properties, low-cost synthesis, and great biocompatibility. The multi-functional magnetic nanoparticles have been successfully applied for the reduction of toxic metal ions up to ppb level in waste-treated water. This chapter highlights the potential application of magnetic nanoparticles for the removal of heavy metals.

Treated Clay Mineral as Adsorbent for the Removal of Heavy Metals from Aqueous Solution

2021 ◽  
Author(s):  
Paul Egwuonwu Dim ◽  
Mutsee Termtanun
Keyword(s):  
Heavy Metals ◽  
Adsorption Capacity ◽  
Adsorption Equilibrium ◽  
Kinetic Constant ◽  
Specific Area ◽  
Batch Method ◽  
Chromium Vi ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order ◽  
Best Fit

The decontamination of heavy metals present in aquatic bodies is a significant challenge that requires urgent attention. Analytical methods such as BET, XRF, SEM-EDX, and XRD was employed to characterize the raw clay (NT) and acid treated clay (AT). The adsorption of Cr (VI) and Fe (III) onto AT was performed using the batch method. The effects of time, adsorbent dose, temperature, and pH show that the optimal conditions are 50 min, 0.3 g, 35°C, and pH 6. The surface area of AT was 389.37 m2/g, and the adsorption equilibrium time of AT was 50 min. Langmuir isotherms had the best fit. Adsorption capacity is 18.15 and 39.80 mg/g for Cr (VI) and Fe (III) ions, respectively. An increase in area considerably improved the adsorption capacity of AT in the surface specific area. The interaction of Cr (VI) and Fe (III) ions onto AT indicated spontaneous and endothermic reaction. The chromium (VI) kinetic constant (k2 = 1.679) was faster compared to Fe (III) rate constant (k2 = 0.0526). It agreed correctly with the pseudo-second-order equation. The sum square error (SSE) value obtained confirmed the best-fit equations. The percent adsorbed for Cr (VI) and Fe (III) is 74 and 90%. The results revealed that iron has a higher affinity towards AT than chromium. The study revealed that AT could be suitable and effective in the adsorption of chromium and iron in the wastewater medium.

Functionalized Magnetic Nanoparticles for Environmental Remediation

2015 ◽  
pp. 518-551 ◽  
Author(s):  
Ravindra Kumar Gautam ◽  
Shivani Soni ◽  
Mahesh Chandra Chattopadhyaya
Keyword(s):  
Heavy Metals ◽  
Magnetic Nanoparticles ◽  
Environmental Remediation ◽  
Anthropogenic Activities ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Toxic Metal ◽  
Volume Ratio ◽  
Removal Of Heavy Metals

Water pollution by anthropogenic activities is proving to be of critical concern as the heavy metals affect aquatic organisms and can quickly disperse to large distances. This poses a risk to both human health and the aquatic biota. Hence, there is a need to treat the wastewater containing toxic metals before they are discharged into the water bodies. During recent years, magnetic nanoparticles came to the foreground of scientific interest as a potential adsorbent of novel wastewater treatment processes. Magnetic nanoparticles have received much attention due to their unique properties, such as extremely small size, high surface-area-to-volume ratio, surface modifiability, multi functionality, excellent magnetic properties, low-cost synthesis, and great biocompatibility. The multi-functional magnetic nanoparticles have been successfully applied for the reduction of toxic metal ions up to ppb level in waste-treated water. This chapter highlights the potential application of magnetic nanoparticles for the removal of heavy metals.

Sign in / Sign up

Export Citation Format

Share Document