scholarly journals Hair Growth Promoting Activity of Cedrol Nanoemulsion in C57BL/6 Mice and Its Bioavailability

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1795
Author(s):  
Yaling Deng ◽  
Feixue Huang ◽  
Jiewen Wang ◽  
Yumeng Zhang ◽  
Yan Zhang ◽  
...  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Hair Growth ◽  
Average Particle Size ◽  
Hair Follicles ◽  
Release Profile ◽  
Average Particle ◽  
Positive Effects

As the main component of Platycladus orientalis, cedrol has known germinal activity. A range of cedrol formulations have been developed to prevent hair-loss, but compliance remains key issues. In this study, we prepared cedrol nanoemulsion (CE-NE) and determined the particle size and PDI (polydispersion coefficient), investigated the hair growth activity and studied the bioavailability in vitro and in vivo. Results showed that the average particle size of CE-NE is 14.26 ± 0.16 nm, and the PDI value is 0.086 ± 0.019. In vitro drug release investigation and drug release kinetics analysis showed release profile of CE from nanoparticles demonstrates the preferred partition of CE in buffer pH 4.0, the release profile of CE-NE showed a first-order kinetics reaching around 36.7% after 6 h at 37 °C. We artificially depilated the back hair of C57BL/6 mice and compared the efficacy of a designed cedrol nanoemulsion to an existing ointment group. The hair follicles were imaged and quantified using a digital photomicrograph. The results showed that compared with the ointment, CE-NE had positive effects on hair growth, improved drug solubility. Compared with the ointment and 2% minoxidil groups, 50 mg/mL CE-NE led to more robust hair growth. Pharmacokinetics analysis showed that the AUC0–t of CE-NE was 4-fold higher than that of the ointment group, confirming that the bioavailability of the nanoemulsion was greater than that of the ointment. CE-NE also significantly reduced the hair growth time of model mice and significantly increased the growth rate of hair follicles. In conclusion, these data suggest that the nanoemulsion significantly improved the pharmacokinetic properties and hair growth effects cedrol, enhancing its efficacy in vitro and in vivo.

scholarly journals Development and Evaluation of Floating Microspheres of Sumatriptan Succinate using Ethyl Cellulose and Mucilage Extracted from Vigna Mungo

2021 ◽  
pp. 24-36
Author(s):  
Nilesh S. Kulkarni ◽  
Mukta A. Kulkarni ◽  
Rahul H. Khiste ◽  
Mohini C. Upadhye ◽  
Shashikant N. Dhole
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Ethyl Cellulose ◽  
Polymer Concentration ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Vigna Mungo ◽  
Average Particle ◽  
Sumatriptan Succinate

Aim: The present investigation is to formulate and evaluate gastroretentive floating microspheres for sumatriptan succinate. Gastric retention is widely used approach to retain dosage form in stomach and to enhance absorption of drugs. Methods: The gastroretentive floating microspheres was prepared by two different techniques as solvent evaporation and W/O/W multiple emulsion technique. Ethyl cellulose, HPMC K4M polymer and mucilage extracted from Vigna Mungo in various proportions were used for formulation of microspheres. Combination of ethyl acetate and acetone in different proportion was used as organic phase and the microspheres were characterized for particle size, shape, morphology, percentage yield, entrapment efficiency, drug loading, In-Vitro Floating/Buoyancy study, In-vitro Floating/Buoyancy study and release kinetics. Results: The average particle size of all batches was found in the range 100 to 210 μm and the entrapment efficiency of all formulations was found in the range of 17.46 % to 59.28 %.Total floating time for Sumatriptan succinate floating microspheres was observed more than 12 h. The In-Vitro drug release study was performed for all formulations showed drug release in controlled manner. Conclusion: The particle size was increased with increased polymer concentration and it showed that polymer concentration has an impact on the entrapment efficiency. Ethyl cellulose microspheres showed more entrapment and sustained delivery of sumatriptan Succinate than microspheres prepared by combination of Ethyl cellulose: HPMC K4M and Ethyl cellulose: Vigna mungo mucilage.

scholarly journals Preparation, characterization, and in vitro evaluation of amphiphilic peptide P12 and P12-DOX nanomicelles as antitumor drug carriers

2020 ◽  
Vol 10 ◽  
pp. 184798042091151 ◽  
Author(s):  
Ping Song ◽  
Wuchen Du ◽  
Wanzhen Li ◽  
Longbao Zhu ◽  
Weiwei Zhang ◽  
...  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Phase ◽  
Average Particle Size ◽  
In Vitro Release ◽  
Drug Carriers ◽  
Average Particle ◽  
Polymer Micelles ◽  
Amphiphilic Peptide

Polymerized polypeptide nanomicelles have attracted much attention as novel drug carriers because of their good biocompatibility and degradability. To prepare doxorubicin (DOX)-loaded nanomicelles, an amphiphilic peptide, FFHFFH-KKGRGD (P12), was synthesized by solid-phase synthesis, and the physicochemical and drug-release properties, as well as the cytotoxicity of the nanomicelles, were evaluated in vitro. The P12-DOX polymer micelles were prepared by dialysis. The morphology and particle size were characterized by transmission electron microscopy and dynamic light scattering. The critical micelle concentration (CMC) of the polymer was determined by the probe method, and the drug-release characteristics of the micelles were studied by dynamic dialysis. The cytotoxicity and uptake of the P12-DOX micelles were evaluated against mouse breast cancer cells (4T1) and human umbilical vein endothelial cells. The peptide polymer micelles containing DOX were uniformly sized and had a spherical core–shell structure with an average particle size of 128.6 nm. The CMC of the polymer was low (0.0357 mg/mL). The in vitro release of DOX from the micelles is slow and is consistent with first-order kinetics. The copolymer micelles of the P12 polypeptide and DOX can be used as nanoscale spherical carriers of hydrophobic drugs and have broad applicability.

scholarly journals Formulation and Evaluation of Ketoconazole Nanosponge gel

2021 ◽  
Vol 23 (2) ◽  
Author(s):  
Vijay R Chakote ◽  
◽  
Ms.Deepali R. Wagh ◽  
Mr. Rahul S. Waghmare ◽  
Umesh T. Jadhao ◽  
...  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Average Particle Size ◽  
In Vitro Release ◽  
Average Particle ◽  
Sustained Drug Release ◽  
Percentage Yield ◽  
Viscosity Study ◽  
Cross Linker

Ketoconazole Nanosponges were prepared by using Hyper cross linked β-cyclodextrin method by using different concentration of cross-linker. Diphenyl carbonate was used as the cross linking polymer. Nanosponge formulations were prepared by using β-CD: cross linker ratios of 1:15, 1:10, 1:5 and 1:3.Thepreparednanosponges were evaluated for percentage yield, incorporation efficiency, particle size, drug polymer compatibility, scanning electron microscopy andin-vitrodrugrelease.SEM studies confirmed their porous structure with number of nano channels. The FTIR spectra showed stable character of Ketoconazole in mixture of polymers and revealed the absence of drug polymer interactions. DSC study revealed that drug was involved in complexation with nanosponges. The average particle size of Ketoconazole nanoparticles was found to be in the range of 78.81± 0.20 nm to336.02 ± 0.124nm.The drug release from nanosponges was found to extended upto 8hr. 82 to 92%.The nano sponges were formulated into gel using Carbopol 940Batches G1 to G4 were prepared by incorporating nanosponges equivalent to 6%w/w of ketoconazole in different polymer concentrations respectively and evaluated for Percent drug content, Viscosity study, Spreadability study, In vitro diffusion studies. Nanosponge gel G1 showed the optimum pH, viscosity, Spread ability and In vitro release. Drug diffusion from the nanosponge loaded gel formulations was show sustained rate. A sustained release topical drug delivery of Ketoconazole developed as a nanosponge loaded gel offers solubilizing matrix for the drug, served as a local depot for sustained drug release and provided a rate limiting matrix barrier for modulation of drug release.

scholarly journals Formulation and Evaluation of Mucoadhesive Acarbose Microspheres

2016 ◽  
Vol 1 (1) ◽  
Author(s):  
Manish Kumar Sharma
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Guar Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Average Particle Size ◽  
Prolonged Release ◽  
Average Particle ◽  
In Vitro Drug Release ◽  
In Vitro Adhesion

The purpose of the present investigation was the formulation and characterization of mucoadhesive sustained release microsphere of antidibetic drug Acarbose that would adhere in mucosa and release continuously to provide long term effect. There was various formulations of Acarbose were prepared by solvent evaporation technique using hydroxypropyl methylcellulose (HPMC), Sodium Alginate, Carbopol, Xanthan gum, Guar gum as a polymer. The prepared mucoadhesive microspheres were evaluated for particle size, surface morphology, drug entrapment efficiency, Drug content, buoyancy percentage and In-vitro drug release, In-vitro adhesion test and stability studies. The particle was found to be discrete and spherical with the average particle size in the range of 105.5 to 413.5μm. As the concentration of polymers increases it affects the various evaluation parameters like particle size, in-vitro drug release and In-vitro adhesion. The floating microspheres of optimized formulation exhibited the prolonged release of 85.8% in continuous manner up to 12 hrs. It is concluded that the optimized formulation of Acarbose mucoadhesive microspheres can be selected for sustained drug delivery system for improved bioavailability.

scholarly journals BETAMETHASONE DIPROPIONATE GEL FOR TREATMENT OF LOCALIZED PLAQUE PSORIASIS

2017 ◽  
Vol 9 (8) ◽  
pp. 173 ◽  
Author(s):  
Sanaa El Gizaway ◽  
Maha Fadel ◽  
Basma Mourad ◽  
Fatma El-zahraa Abd Elnaby
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Betamethasone Dipropionate ◽  
Average Particle ◽  
Topical Formulation ◽  
Content Type ◽  
Drug Content

Objective: The main aim of this study was to design and characterise betamethasone di-propionate loaded transfersomes (BD-T); as a topical formulation for the treatment of localized plaque psoriasis.Methods: A full factorial design (23) was applied to study the effects of three independent variables: drug content, type of surfactants and surfactant contents on particle size (PS), entrapment efficiency (EE %), zeta potential (ZP), polydispersity index (PI) and drug release profiles. The optimized BD-T was formulated as a hydrogel using 5% sodium carboxymethyl cellulose. The gel was characterized for viscosity, drug content, in vitro drug release and stability. A comparative clinical study was performed on 20 patients with psoriasis to investigate the effect of BD-T gel and the marketed betamethasone dipropionate (BD) cream.Results: The optimized BD-T formulation containing 50 mg betamethasone dipropionate (BD) and 5 mg tween 80 showed spherical unilamellar vesicles with an average particle size of 242.80, % EE of 90.19%, ZP of-15.00 mV, PI of 0.407 and K0 of 4.290 mg/hr. The formulation showed good stability at 4 °C and 25 °C for 6 mo. The results revealed significant clinical improvement and a significant increase in safety and tolerability with BD-T gel compared with BD cream.Conclusion: As a conclusion, BD-T was found to be more effective, safe and tolerable for the treatment of psoriasis compared with the marketed product.

FORMULATION, CHARACTERIZATION AND IN VITRO EVALUTION OF GABAPENTIN FLOATING MICROSPHERES

INDIAN DRUGS ◽  
2017 ◽  
Vol 54 (01) ◽  
pp. 20-27
Author(s):  
H. B Samal ◽  
I. J. Das ◽  
P. N. Murthy ◽  
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Release Kinetics ◽  
Polymer Concentration ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Linear Regression Method ◽  
Average Particle ◽  
Drug Entrapment Efficiency

The present study involves the design and characterization of floating microspheres with gabapentin as model drug for prolongation of gastric residence time. Gabapentin floating microspheres were prepared by o/w/o emulsification solvent diffusion technique using ethyl cellulose as the rate controlling polymer at various concentrations. The shape and surface morphology of microspheres were characterized by optical and scanning electron microscopy. Absence of drug-polymer interaction was confirmed by FTIR analysis. In vitro drug release studies were performed and drug release kinetics was evaluated using the linear regression method. Effects of polymer concentration, solvent composition, particle size, drug entrapment efficiency and drug release were also studied. The synthesized microspheres exhibited prolonged drug release (> 12 h) and remained buoyant for > 24 h. The drug entrapment efficiency was in the range 46-70 %. At higher polymer concentration, the average particle size was increased and the drug release rate decreased. In vitro studies revealed diffusion-controlled drug release from the microspheres. Among all the formulations (F1-F5), F4 is the optimized formulation.

Indinavir-Loaded Nanostructured Lipid Carriers to Brain Drug Delivery: Optimization, Characterization and Neuropharmacokinetic Evaluation

2019 ◽  
Vol 16 (4) ◽  
pp. 341-354 ◽  
Author(s):  
Mohammad Nasiri ◽  
Amir Azadi ◽  
Mohammad Reza Saghatchi Zanjani ◽  
Mehrdad Hamidi
Keyword(s):  
Drug Delivery ◽  
Particle Size ◽  
Zeta Potential ◽  
Average Particle Size ◽  
In Vitro Release ◽  
Free Drug ◽  
Average Particle ◽  
The Brain

Purpose: As an anti-retroviral Protease Inhibitor (PI), Indinavir (IDV) is part of the regimen known as Highly Active Anti-Retroviral Therapy (HAART) widely used for Human Immunodeficiency Virus (HIV) infection. The drug efficiency in treatment of the brain manifestations of HIV is, however, limited which is mainly due to the efflux by P-glycoprotein (P-gp) expressed at the Blood-Brain Barrier (BBB). Methods: To overcome the BBB obstacle, NLCs were used in this study as carriers for IDV, which were optimized through two steps: a “one-factor-at-a-time” screening followed by a systematic multiobjective optimization. Spherical smooth-surfaced Nanoparticles (NPs), average particle size of 161.02±4.8 nm, Poly-Dispersity Index (PDI) of 0.293±0.07, zeta potential of -40.62±2.21 mV, entrapment efficiency of 93±1.58%, and loading capacity of 9.15±0.15% were obtained after optimization which were, collectively, appropriate in terms of the objective of this study. Result: The surface of the optimized NPs was, then, modified with human Transferrin (TR) to improve the drug delivery. The particle size, zeta potential, and PDI of the TR-modified NLCs were 185.29±6.7nm, -28.68±3.37 mV, and 0.247±0.06, respectively. The in vitro release of IDV molecules from the NPs was best fitted to the Weibull model indicating hybrid diffusion/erosion behavior. Conclusion: As the major in vivo findings, compared to the free drug, the NLCs and TR-NLCs displayed significantly higher and augmented concentrations in the brain. In this case, NLC and TR-NLC were 6.5- and 32.75-fold in their values of the brain uptake clearance compared to free drug.

scholarly journals DEVELOPMENT AND IN VITRO EVALUATION OF 5-FLUOROURACIL NANOPARTICLES BY SALTING OUT TECHNIQUE

2020 ◽  
pp. 166-171
Author(s):  
SAILAJA PB ◽  
JEEVANA JYOTHI B
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Average Particle Size ◽  
Average Particle ◽  
Salting Out ◽  
In Vitro Drug Release ◽  
Release Studies ◽  
S 100 ◽  
Percentage Release

Objectives: At the current miserable state of the prevalence of cancers, there is a need for the development of simple technologies to prepare formulations of anticancer drugs with less economy and investment. Hence, the aim of the present work is to prepare nanoparticles of 5-fluorouracil (5-FU) by simple technique, such as salting out method. Methods: Nanoparticles containing 10 mg of 5-FU were prepared by salting out method using Eudragit-100 as polymer. The prepared nanoparticles were evaluated by particle size, zeta potential, in vitro drug release studies, and drug-excipient interaction studies. Results: Nanoparticles prepared by salting out methods showed higher dissolution rate for formulation F3 and F5 revealed high percentage release of 98.6±0.24 in 60 min and 86.5±0.39% in 120 min. Fourier transform infrared (FTIR) spectra revealed no interaction between drug and excipients used for preparation. Conclusion: 5-FU nanoparticles can be produced successfully by salting out method using drug to polymer (Eudragit S-100) ratio of 1:3 to possess ideal drug release characteristics and average particle size of 205.1 nm.

scholarly journals Development and Characterization of Pioglitazone Nanoparticles for the Effective Treatment of Diabetes Mellitus

2021 ◽  
pp. 172-182
Author(s):  
Revathi A. Gupta ◽  
P. Odaya Kumar
Keyword(s):  
Diabetes Mellitus ◽  
Drug Release ◽  
Average Particle Size ◽  
Tween 80 ◽  
Cubic Phase ◽  
Average Particle ◽  
Drug Release Profile ◽  
Treatment Of Diabetes

Pioglitazone is designated as a BCS class II medication since it is weakly water soluble.The goal of this study was to create starch nanoparticles for the administration of Pioglitazone in attempt to lessen dose-related side effects and maybe prolong its release in the treatment of diabetes.Using starch as a polymer, tween 80 as a stearic barrier, and citric acid to enhance stability, nanoparticles were constructed using the solvent evaporation technique. In-vitro characterization techniques for drug-polymer compatibility, size, surface morphology, encapsulation efficacy, and delivery properties were performed on framed nanoparticles, followed by In-vivo studies.The compatible nature of selected excipients for the manufacture of Pioglitazone nanoparticles was shown by FTIR findings.The results of the XRD analysis revealed that the generated Pioglitazone nanoparticles were non-crystalline in nature.The selected developed Pioglitazone nanoparticles were in cubic phase with average particle size of 160.5 ± 11.24–245.4 ± 15.96 nm with charge ranging from 10.5 ± 6.21-138.6 ± 5.31mV.The encapsulation efficiency of Pioglitazone nanoparticles produced ranged from 57.24 5.80 to 89.96 1.9%. The In-vitro drug release studies of Pioglitazone nanoparticles showed controlled drug release profile. Furthermore, In-vivo investigations on blood glucose profiles revealed that the created Pioglitazone nanoparticles for the treatment of diabetes mellitus had a substantial effect.

scholarly journals Formulation and evaluation of guar gum based matrix tableted glibenclamide microspheres

2020 ◽  
Vol 11 (2) ◽  
pp. 2445-2457
Author(s):  
Prashant Singh ◽  
Ritu M. Gilgotra
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Guar Gum ◽  
Average Particle Size ◽  
Entrapment Efficiency ◽  
Matrix Tablets ◽  
Matrix Tablet ◽  
Average Particle ◽  
Drug Entrapment Efficiency

The purpose of this investigation is to establish anti-diabetic activity relationship as well as efficiency of formulated guar gum matrix tablet using microencapsulated glibenclamide (GBLD). This research is an approach to utilize pharmaceutical excipients as an alternative hypoglycemic agent. In order to execute the objective, GBLD microspheres were formulated by emulsion solvent evaporation method using dichloromethane and methanol as solvent system which was transferred drop after drop into encapsulating medium i.e. liquid paraffin light. The formulated microspheres were exposed to various assessment parameters like drug entrapment efficiency, % yield, particle size distribution, and average particle size, the morphology of surface, dissolution study (in vitro) and micromeritics of prepared microspheres. By using these microspheres, matrix tablets were then prepared which were further evaluated for weight variation, thickness, friability, hardness, drug content, stability study, disintegration time, swelling index and dissolution (in vitro) studies were carefully carried out. Betwixt all the formulated microspheres GEM3 was found to best optimized with respect to evaluation parameters. The results obtained were found within the desired ranges where % yield 93.75%, drug entrapment efficiency 95.627% at 12th hour, and the average particle size was observed to be 179.4±0.12 µm. Then, by using the method of direct compression matrix tablets of optimized microspheres GEM3 were prepared and drug release (in vitro) was performed. The obtained results of performed parameters on matrix tableted microspheres were within the acceptable range according to IP guidelines. Out of all formulated matrix tableted microspheres, formulation GMT4 and GMT7 showed an in-vitro % drug release of 95.257 and 94.404 at 12th hour in pH 7.4 phosphate buffer. 

Sign in / Sign up

Export Citation Format

Share Document