scholarly journals Polymerization Isomerism in Co-M (M = Cu, Ag, Au) Carbonyl Clusters: Synthesis, Structures and Computational Investigation

Molecules ◽  
2021 ◽  
Vol 26 (6) ◽  
pp. 1529
Author(s):  
Cristiana Cesari ◽  
Beatrice Berti ◽  
Francesco Calcagno ◽  
Cristina Femoni ◽  
Marco Garavelli ◽  
...  
Keyword(s):  
Solid State ◽  
Density Functional ◽  
Molecular Structures ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
Cluster Chemistry ◽  
Molecular Weights ◽  
Crystallization Conditions

The reaction of [Co(CO)4]− (1) with M(I) compounds (M = Cu, Ag, Au) was reinvestigated unraveling an unprecedented case of polymerization isomerism. Thus, as previously reported, the trinuclear clusters [M{Co(CO)4}2]− (M = Cu, 2; Ag, 3; Au, 4) were obtained by reacting 1 with M(I) in a 2:1 molar ratio. Their molecular structures were corroborated by single-crystal X-ray diffraction (SC-XRD) on isomorphous [NEt4][M{Co(CO)4}2] salts. [NEt4](3)represented the first structural characterization of 3. More interestingly, changing the crystallization conditions of solutions of 3, the hexanuclear cluster [Ag2{Co(CO)4}4]2− (5) was obtained in the solid state instead of 3. Its molecular structure was determined by SC-XRD as Na2(5)·C4H6O2, [PPN]2(5)·C5H12 (PPN = N(PPh3)2]+), [NBu4]2(5) and [NMe4]2(5) salts. 5 may be viewed as a dimer of 3 and, thus, it represents a rare case of polymerization isomerism (that is, two compounds having the same elemental composition but different molecular weights) in cluster chemistry. The phenomenon was further studied in solution by IR and ESI-MS measurements and theoretically investigated by computational methods. Both experimental evidence and density functional theory (DFT) calculations clearly pointed out that the dimerization process occurs in the solid state only in the case of Ag, whereas Cu and Au related species exist only as monomers.

scholarly journals Metal-Rich Metallaboranes: Synthesis, Structures and Bonding of Bi- and Trimetallic Open-Faced Cobaltaboranes

Inorganics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 28
Author(s):  
Kriti Pathak ◽  
Chandan Nandi ◽  
Jean-François Halet ◽  
Sundargopal Ghosh
Keyword(s):  
Electronic Structures ◽  
Density Functional ◽  
Room Temperature ◽  
Electron Pair ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Cluster 2 ◽  
Cobalt Center

Synthesis, isolation, and structural characterization of unique metal rich diamagnetic cobaltaborane clusters are reported. They were obtained from reactions of monoborane as well as modified borohydride reagents with cobalt sources. For example, the reaction of [Cp*CoCl]2 with [LiBH4·THF] and subsequent photolysis with excess [BH3·THF] (THF = tetrahydrofuran) at room temperature afforded the 11-vertex tricobaltaborane nido-[(Cp*Co)3B8H10] (1, Cp* = η5-C5Me5). The reaction of Li[BH2S3] with the dicobaltaoctaborane(12) [(Cp*Co)2B6H10] yielded the 10-vertex nido-2,4-[(Cp*Co)2B8H12] cluster (2), extending the library of dicobaltadecaborane(14) analogues. Although cluster 1 adopts a classical 11-vertex-nido-geometry with one cobalt center and four boron atoms forming the open pentagonal face, it disobeys the Polyhedral Skeletal Electron Pair Theory (PSEPT). Compound 2 adopts a perfectly symmetrical 10-vertex-nido framework with a plane of symmetry bisecting the basal boron plane resulting in two {CoB3} units bridged at the base by two boron atoms and possesses the expected electron count. Both compounds were characterized in solution by multinuclear NMR and IR spectroscopies and by mass spectrometry. Single-crystal X-ray diffraction analyses confirmed the structures of the compounds. Additionally, density functional theory (DFT) calculations were performed in order to study and interpret the nature of bonding and electronic structures of these complexes.

scholarly journals 2-Hetaryl-1,3-tropolones based on five-membered nitrogen heterocycles: synthesis, structure and properties

2015 ◽  
Vol 11 ◽  
pp. 2179-2188 ◽  
Author(s):  
Yury A Sayapin ◽  
Inna O Tupaeva ◽  
Alexandra A Kolodina ◽  
Eugeny A Gusakov ◽  
Vitaly N Komissarov ◽  
...  
Keyword(s):  
Density Functional ◽  
Acetic Acid Solution ◽  
Intramolecular Proton Transfer ◽  
Molecular Structures ◽  
X Ray Diffraction ◽  
Dft Methods ◽  
Functional Theory ◽  
X Ray ◽  
X Ray Crystallography ◽  
Derivatives Of

A series of derivatives of 2-hetaryl-1,3-tropolone (β-tropolone) was prepared by the acid-catalyzed reaction of 2-methylbenzoxazoles, 2-methylbenzothiazoles and 2,3,3-trimethylindoline with 3,4,5,6-tetrachloro-1,2-benzoquinone. The molecular structures of the three representative compounds were determined by X-ray crystallography. In crystal and (as shown by the DFT PBE0/6-311+G** calculations) in solution, 2-hetaryl-4,5,6,7-tetrachloro- and 2-hetaryl-5,6,7-trichloro-1,3-tropolones exist in the NH-tautomeric form with a strong resonance-assisted intramolecular N–H···O hydrogen bond. The mechanism of the formation of 1,3-tropolones in the reaction of methylene-active five-membered heterocycles with o-chloranil in acetic acid solution has been studied using density functional theory (DFT) methods. The reaction of 2-(2-benzoxa(thia)zolyl)-5,6,7-trichloro(4,5,6,7-tetrachloro)-1,3-tropolones with alcohols leads to the contraction of the seven-membered tropone ring with the formation of 2-(2-benzoxa(thia)zolyl)-6-alkoxycarbonylphenols. The molecular structure of 2-(2-ethoxycarbonyl-6-hydroxy-3,4,5-trichlorophenyl)benzoxazole has been determined by X-ray diffraction. 2-(2-Benzoxa(thia)zolyl)-6-alkoxycarbonylphenols display intense green fluorescence with anomalous Stokes shifts caused by the excited state intramolecular proton transfer (ESIPT) effects.

scholarly journals Preparation of Zirconium Oxide Powder Using Zirconium Carboxylate Precursors

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Mohammed H. Al-Hazmi ◽  
YongMan Choi ◽  
Allen W. Apblett
Keyword(s):  
Dft Calculations ◽  
Density Functional ◽  
Dissociative Adsorption ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
Experimental Findings ◽  
Periodic Dft Calculations ◽  
Good Agreement

Zirconia was prepared at low temperatures (<450°C) using single several source precursors based on zirconium carboxylates where the R groups were systematically varied. The combination of density functional theory (DFT) calculations and extensive characterization of the precursors (i.e., X-ray diffraction, thermal gravimetric analysis, infrared spectroscopy, and scanning electron microscopy) indicated that the carboxylic acid complexes may link the zirconium metal with a cis bidentate configuration. Periodic DFT calculations were performed to examine the interaction between monoclinic ZrO2 and propanoic acid. Dissociative adsorption takes place through the cis bidentate structure with an adsorption energy of −1.43 eV. Calculated vibrational frequencies using the optimized structure are in good agreement with experimental findings.

Functionalisation of Imidazolin-2-imine to Corresponding Phosphinamine, Chalcogenide (O, S, Se, Te), and Borane Compounds

2015 ◽  
Vol 68 (1) ◽  
pp. 127 ◽  
Author(s):  
Kishor Naktode ◽  
Sayak Das Gupta ◽  
Abhinanda Kundu ◽  
Salil K. Jana ◽  
Hari Pada Nayek ◽  
...  
Keyword(s):  
Good Yield ◽  
Density Functional ◽  
Elemental Sulfur ◽  
Molecular Structures ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Tert Butyl ◽  
Imine Ligands ◽  
Orbital Analysis

1,3-Di-tert-butyl-imidazolin-2-ylidine-1,1-diphenylphosphinamine (2) was prepared from 1,3-di-tert-butyl-imidazolin-2-imine (1) and chlorodiphenylphosphine. Compound 2 was treated further with elemental sulfur, selenium, and tellurium to afford the corresponding chalcogenide derivatives, 1,3-di-tert-butyl-imidazolin-2-ylidine-P,P-diphenyl-phosphinothioicamide (4), 1,3-di-tert-butyl-imidazolin-2-ylidine-P,P-diphenyl-phosphinoselenoicamide (5), and 1,3-di-tert-butyl-imidazolin-2-ylidine-P,P-diphenyl-phosphinotelluroicamide (6) in good yield. 1,3-Di-tert-butyl-imidazolin-2-ylidine-P,P-diphenylphosphinicamide (3) was obtained by dissolving compound 2 in hydrochloric acid solution in THF. The corresponding borane adduct, 1,3-di-tert-butyl-imidazolin-2-ylidine-P,P-diphenyl-phosphinaminoborane (7) was isolated by the reaction of compound 2 and sodium borohydride in good yield. The molecular structures of compounds 2 and 4–7 were established by X-ray diffraction analyses. To analyse the electronic structure of chalcogenides of imidazolin-2-imine ligands, the protonation energies of the oxygen, sulfur, and selenide derivative of ligand 2 were calculated by means of density functional theory. Finally, the charge distribution in compounds 3, 4, and 5 were determined using natural bond orbital analysis.

scholarly journals Structural basis for the transformation pathways of the sodium naproxen anhydrate–hydrate system

IUCrJ ◽  
2014 ◽  
Vol 1 (5) ◽  
pp. 328-337 ◽  
Author(s):  
Andrew D. Bond ◽  
Claus Cornett ◽  
Flemming H. Larsen ◽  
Haiyan Qu ◽  
Dhara Raijada ◽  
...  
Keyword(s):  
Solid State ◽  
Density Functional ◽  
Structural Information ◽  
Structural Similarity ◽  
Structural Basis ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
Face To Face ◽  
Transformation Pathways ◽  
Dehydration Processes

Crystal structures are presented for two dihydrate polymorphs (DH-I and DH-II) of the non-steroidal anti-inflammatory drug sodium (S)-naproxen. The structure of DH-I is determined from twinned single crystals obtained by solution crystallization. DH-II is obtained by solid-state routes, and its structure is derived using powder X-ray diffraction, solid-state13C and23Na MAS NMR, and molecular modelling. The validity of both structures is supported by dispersion-corrected density functional theory (DFT-D) calculations. The structures of DH-I and DH-II, and in particular their relationships to the monohydrate (MH) and anhydrate (AH) structures, provide a basis to rationalize the observed transformation pathways in the sodium (S)-naproxen anhydrate–hydrate system. All structures contain Na+/carboxylate/H2O sections, alternating with sections containing the naproxen molecules. The structure of DH-I is essentially identical to MH in the naproxen region, containing face-to-face arrangements of the naphthalene rings, whereas the structure of DH-II is comparable to AH in the naproxen region, containing edge-to-face arrangements of the naphthalene rings. This structural similarity permits topotactic transformation between AH and DH-II, and between MH and DH-I, but requires re-organization of the naproxen molecules for transformation between any other pair of structures. The topotactic pathways dominate at room temperature or below, while the non-topotactic pathways become active at higher temperatures. Thermochemical data for the dehydration processes are rationalized in the light of this new structural information.

scholarly journals A multinuclear solid state NMR, density functional theory and X-Ray diffraction study of hydrogen bonding in Group I hydrogen dibenzoates

CrystEngComm ◽  
2013 ◽  
Vol 15 (43) ◽  
pp. 8823 ◽  
Author(s):  
Gregory J. Rees ◽  
Stephen P. Day ◽  
Alberth Lari ◽  
Andrew P. Howes ◽  
Dinu Iuga ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Hydrogen Bonding ◽  
Solid State ◽  
Diffraction Study ◽  
Solid State Nmr ◽  
Density Functional ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray ◽  
Group I

scholarly journals Hydrosilyation of CO2 using a silatrane hydride: structural characterization of a silyl formate compound

2021 ◽  
Vol 99 (2) ◽  
pp. 259-267
Author(s):  
Serge Ruccolo ◽  
Erika Amemiya ◽  
Daniel G. Shlian ◽  
Gerard Parkin
Keyword(s):  
Molecular Structure ◽  
Density Functional Theory ◽  
Oxygen Atom ◽  
Structural Characterization ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
X Ray Diffraction ◽  
Functional Theory ◽  
X Ray

The silatrane hydride compound, [N(CH2CH2O)3]SiH, reacts with CO2 in the presence of the [tris(2-pyridylthio)methyl]zinc hydride complex, [Tptm]ZnH, to afford the silyl formate and methoxide derivatives, [N(CH2CH2O)3]SiO2CH and [N(CH2CH2O)3]SiOCH3. The molecular structure of [N(CH2CH2O)3]SiO2CH has been determined by X-ray diffraction, thereby demonstrating that the formate ligand adopts a distal conformation in which the uncoordinated oxygen atom resides with a trans-like disposition relative to silicon. Density functional theory calculations indicate that the atrane motif of [N(CH2CH2O)3]SiO2CH is flexible, such that the energy of the molecule changes relatively little as the Si···N distance varies over the range 2.0–3.0 Å.

Sign in / Sign up

Export Citation Format

Share Document