scholarly journals Supercritical CO2 Extraction of Palladium Oxide from an Aluminosilicate-Supported Catalyst Enhanced by a Combination of Complexing Polymers and Piperidine

Molecules ◽  
2021 ◽  
Vol 26 (3) ◽  
pp. 684
Author(s):  
Andrea Ruiu ◽  
Bernhard Bauer-Siebenlist ◽  
Marin Senila ◽  
W. S. Jennifer Li ◽  
Karine Seaudeau-Pirouley ◽  
...  
Keyword(s):  
Energy Saving ◽  
Supercritical Co2 ◽  
Supported Catalyst ◽  
Precious Metals ◽  
Palladium Oxide ◽  
Supercritical Co2 Extraction ◽  
Wide Range

Precious metals, in particular Pd, have a wide range of applications in industry. Due to their scarcity, precious metals have to be recycled, preferably with green and energy-saving recycling processes. In this article, palladium extraction from an aluminosilicate-supported catalyst, containing about 2 wt% (weight%) of Pd (100% PdO), with supercritical CO2 (scCO2) assisted by complexing polymers is described. Two polymers, p(FDA)SH homopolymer and p(FDA-co-DPPS) copolymer (FDA: 1,1,2,2-tetrahydroperfluorodecyl acrylate; DPPS: 4-(diphenylphosphino)styrene), were tested with regards to their ability to extract palladium. Both polymers showed relatively low extraction conversions of approximately 18% and 30%, respectively. However, the addition of piperidine as activator for p(FDA-co-DPPS) allowed for an increase in the extraction conversion of up to 60%.

scholarly journals Optimized Supercritical CO2 Extraction Enhances the Recovery of Valuable Lipophilic Antioxidants and Other Constituents from Dual-Purpose Hop (Humulus lupulus L.) Variety Ella

Antioxidants ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 918
Author(s):  
Nóra Emilia Nagybákay ◽  
Michail Syrpas ◽  
Vaiva Vilimaitė ◽  
Laura Tamkutė ◽  
Audrius Pukalskas ◽  
...  
Keyword(s):  
Supercritical Co2 ◽  
Antioxidant Properties ◽  
Extraction Yield ◽  
Biologically Active ◽  
High Yield ◽  
Acid Extraction ◽  
Supercritical Co2 Extraction ◽  
Bioactive Constituents ◽  
Total Extract

The article presents the optimization of supercritical CO2 extraction (SFE-CO2) parameters using response surface methodology (RSM) with central composite design (CCD) in order to produce single variety hop (cv. Ella) extracts with high yield and strong in vitro antioxidant properties. Optimized SFE-CO2 (37 MPa, 43 °C, 80 min) yielded 26.3 g/100 g pellets of lipophilic fraction. This extract was rich in biologically active α- and β-bitter acids (522.8 and 345.0 mg/g extract, respectively), and exerted 1481 mg TE/g extract in vitro oxygen radical absorbance capacity (ORAC). Up to ~3-fold higher extraction yield, antioxidant recovery (389.8 mg TE/g pellets) and exhaustive bitter acid extraction (228.4 mg/g pellets) were achieved under the significantly shorter time compared to the commercially used one-stage SFE-CO2 at 10–15 MPa and 40 °C. Total carotenoid and chlorophyll content was negligible, amounting to <0.04% of the total extract mass. Fruity, herbal, spicy and woody odor of extracts could be attributed to the major identified volatiles, namely β-pinene, β-myrcene, β-humulene, α-humulene, α-selinene and methyl-4-decenoate. Rich in valuable bioactive constituents and flavor compounds, cv. Ella hop SFE-CO2 extracts could find multipurpose applications in food, pharmaceutical, nutraceutical and cosmetics industries.

scholarly journals Supercritical CO2 extraction of Moroccan argan (Argania spinosa L.) oil: Extraction kinetics and solubility determination

2021 ◽  
Vol 46 ◽  
pp. 101458
Author(s):  
Adil Mouahid ◽  
Isabelle Bombarda ◽  
Magalie Claeys-Bruno ◽  
Sandrine Amat ◽  
Emmanuelle Myotte ◽  
...  
Keyword(s):  
Supercritical Co2 ◽  
Oil Extraction ◽  
Supercritical Co2 Extraction ◽  
Extraction Kinetics ◽  
Argania Spinosa ◽  
Solubility Determination

Effect of pelletization on supercritical CO2 extraction of rosemary antioxidants

2019 ◽  
Vol 147 ◽  
pp. 162-171 ◽  
Author(s):  
Caroline Sielfeld ◽  
José M. del Valle ◽  
Federico Sastre
Keyword(s):  
Supercritical Co2 ◽  
Supercritical Co2 Extraction

Trigonella foenum-graecum L. Seed Oil Obtained by Supercritical CO2 Extraction

2012 ◽  
Vol 89 (12) ◽  
pp. 2269-2278 ◽  
Author(s):  
Renming Yang ◽  
Honglun Wang ◽  
Nianhua Jing ◽  
Chenxu Ding ◽  
Yourui Suo ◽  
...  
Keyword(s):  
Supercritical Co2 ◽  
Seed Oil ◽  
Supercritical Co2 Extraction ◽  
Trigonella Foenum Graecum ◽  
Trigonella Foenum Graecum L

Energy consumption optimization for AC drives position control

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Branislav Ftorek ◽  
Milan Saga ◽  
Pavol Orsansky ◽  
Jan Vittek ◽  
Peter Butko
Keyword(s):  
Control System ◽  
Energy Saving ◽  
Energy Savings ◽  
Position Control ◽  
Control Strategies ◽  
Content Type ◽  
Ac Drives ◽  
Energy Demands ◽  
Wide Range ◽  
Energy Consumption Optimization

Purpose The main purpose of this paper is to evaluate the two energy saving position control strategies for AC drives valid for a wide range of boundary conditions including an analysis of their energy expenses. Design/methodology/approach For energy demands analysis, the optimal energy control based on mechanical and electrical losses minimization is compared with the near-optimal one based on symmetrical trapezoidal speed profile. Both control strategies respect prescribed maneuver time and define acceleration profile for preplanned rest-to-rest maneuver. Findings Presented simulations confirm lower total energy expenditures of energy optimal control if compared with near-optimal one, but the differences are only small due to the fact that two energy saving strategies are compared. Research limitations/implications Developed overall control system consisting of energy saving profile generator, pre-compensator and position control system respecting principles of field-oriented control is capable to track precomputed state variables precisely. Practical implications Energy demands of both control strategies are verified and compared to simulations and preliminary experiments. The possibilities of energy savings were confirmed for both control strategies. Originality/value Experimental verification of designed control structure is sufficiently promising and confirmed assumed energy savings.

Sign in / Sign up

Export Citation Format

Share Document