scholarly journals Phytochemical Profiling and Quality Control of Terminalia sericea Burch. ex DC. Using HPTLC Metabolomics

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 432
Author(s):  
Nduvho Mulaudzi ◽  
Chinedu P. Anokwuru ◽  
Sidonie Y. Tankeu ◽  
Sandra Combrinck ◽  
Weiyang Chen ◽  
...  

Terminalia sericea is used throughout Africa for the treatment of a variety of conditions and has been identified as a potential commercial plant. The study was aimed at establishing a high-performance thin layer chromatography (HPTLC) chemical fingerprint for T. sericea root bark as a reference for quality control and exploring chemical variation within the species using HPTLC metabo3lomics. Forty-two root bark samples were collected from ten populations in South Africa and extracted with dichloromethane: methanol (1:1). An HPTLC method was optimized to resolve the major compounds from other sample components. Dichloromethane: ethyl acetate: methanol: formic acid (90:10:30:1) was used as the developing solvent and the plates were visualized using 10% sulfuric acid in methanol as derivatizing agent. The concentrations of three major bioactive compounds, sericic acid, sericoside and resveratrol-3-O-β-rutinoside, in the extracts were determined using a validated ultra-performance liquid chromatography-photodiode array (UPLC-PDA) detection method. The rTLC software (written in the R-programming language) was used to select the most informative retardation factor (Rf) ranges from the images of the analysed sample extracts. Further chemometric models, including principal component analysis (PCA) and hierarchical cluster analysis (HCA), were constructed using the web-based high throughput metabolomic software. The rTLC chemometric models were compared with the models previously obtained from ultra-performance liquid chromatography coupled with mass spectrometry (UPLC-MS). A characteristic fingerprint containing clear bands for the three bioactive compounds was established. All three bioactive compounds were present in all the samples, although their corresponding band intensities varied. The intensities correlated with the UPLC-PDA results, in that samples containing a high concentration of a particular compound, displayed a more intense band. Chemometric analysis using HCA revealed two chemotypes, and the subsequent construction of a loadings plot indicated that sericic acid and sericoside were responsible for the chemotypic variation; with sericoside concentrated in Chemotype 1, while sericic acid was more abundant in Chemotype 2. A characteristic chemical fingerprint with clearly distinguishable features was established for T. sericea root bark that can be used for species authentication, and to select samples with high concentrations of a particular marker compound(s). Different chemotypes, potentially differing in their therapeutic potency towards a particular target, could be distinguished. The models revealed the three analytes as biomarkers, corresponding to results reported for UPLC-MS profiling and thereby indicating that HPTLC is a suitable technique for the quality control of T. sericea root bark.

Molecules ◽  
2019 ◽  
Vol 24 (7) ◽  
pp. 1436 ◽  
Author(s):  
Sabina Lachowicz ◽  
Jan Oszmiański

The aim of this study was to determine the content of triterpenoids and polyphenols, and antioxidative activity in leaves, stalks, and roots of plants from the species Fallopia as well as to present the main relationship between them. Polyphenolic compounds and triterpenoids were identified with liquid chromatography-photodiode detector-mass spectrometry/quadrupole time of flight (LC-MS-Q/TOF; qualitatively) and quantified with an ultra-performance liquid chromatography-photodiode detector (UPLC-PDA (quantitatively), and their antioxidative activity was determined with radical scavenging capacity (ABTS) and oxygen radical absorbance capacity (ORAC) assays. Generally, the wild Fallopia japonica Houtt. species had 1.2 times higher content of bioactive compounds and antioxidative activity than Fallopia sachalinensis. Contents of polyphenolic compounds determined in leaves, stalks, and roots were on average 17.81, 10.60, and 9.02 g/100 g of dry weight (DW), whereas the average contents of triterpenoids reached 0.78, 0.70, and 0.50 g/100 g DW, respectively. The leaves were a better source of polymeric procyanidins, phenolic acids, flavones, and flavonols, as well as oleanolic and ursolic acids than the other morphological parts of the tested plants. However, the roots were an excellent source of flavan-3-ols (monomeric and oligomer) and stilbenes, such as resveratrol, and their derivatives. The results obtained showed significant differences between plants of the wild Fallopia species and their morphological parts, and enabled selecting the most valuable morphological part of the tested plants to be used for food enrichment and nutraceuticals production. Therefore, the leaves seem to be the best as potential food additives for health, due to the above-average content of polyphenolic compounds and triterpenoids. In turn, roots, with their high contents of stilbenes and polyphenolic compounds, represent a good material for the medical, pharmaceutical, and cosmetic industries. The principal component analysis of the plants of wild Fallopia species and their morphological parts confirmed significant differences in their chemical composition.


Author(s):  
Aslam Burhan ◽  
Bhavin Vyas

<p><strong>Objective: </strong>To develop and validate simple, sensitive and selective ultra-performance liquid chromatography and tandem mass spectrometry (UPLC-MS/MS) method for quantification of rifampicin (RIF) in rat plasma and its application to pharmacokinetics study.</p><p><strong>Methods: </strong>Precipitation method was used for the extraction of plasma samples, an aliquot of 25 µl plasma samples was extracted using acetonitrile precipitation technique. Chromatographic separation was performed usingWaters Acquity<sup>TM</sup>UPLC columns, BEH C18 (50 mm× 2.1 mm, 1.7 µm) by a gradient mixture of acetonitrile and water (both containing 0.1 % formic acid) as a mobile phase at the flow rate of 0.7 ml/min.The analyte was protonated in the positive ESI (electrospray ionization interface) and detected in MRM (multiple reactions monitoring) modes using the transition m/z 308.60-455.30.</p><p><strong>Results: </strong>The method had a short chromatography run time of 1.8 min with improved sensitivity over existing methods. Calibration curves been linear over the wide range of 1.97-5047.00 ng/ml. The between and within-batch precision and accuracy of the method was determined by using 4 quality control samples; the highest %CV observed was10.11. The mean recovery values are 74.26, 82.77 and 101.73 at low, medium and high-quality control levels; respectively.</p><p><strong>Conclusion: </strong>It was concluded that the developed and validated UPLC-MS/MS method was sensitive,specific, precise, linear, and rapid. Therefore, the method can be used for quantification of RIFin rat plasma with various advantages over the reported methods. RIF is widely recommended by US-FDAguidance for industry on drug interaction studies and the developed method can be used to explore drug interaction studies in drug discovery and development.</p>


Author(s):  
Gabrielle Nunes da Silva ◽  
Letícia Delduque Alves ◽  
Isabella Escobar dos Santos ◽  
Daniele Maia Bila ◽  
Alfredo Akira Ohnuma Júnior ◽  
...  

This study evaluates the rainwater harvesting system to determine the chemical quality of the water and allocate it for use. Samples were collected in the city of Rio de Janeiro at the points of Direct Precipitation (DP), First Flush (FF) and Reservoir (RR). The methodology involved carrying out an analysis of Ca, Cd, Cu, Na, Ni, Fe, K, Mg, Pb, Zn, conductivity, turbidity, pH and chloride. The R language was used for the principal component analysis, Pearson coefficient correlation, hierarchical cluster analysis, Tukey test and boxplot. The results show that when there is no interference from the catchment surface (DP), the rainwater has a low concentration of metals, although the first millimeters of rain have a concentration above what is permissible in the guidelines issued by the Ministry of Health (Ordinance n° 05/2017). The disposal system (FF) reduced the concentration of pollutants in the RR, but not enough to comply with legislation. It was noted that Ca, K and Na are the main metals found in rainwater. During the dry period, there were significant correlations between the physico-chemical and meteorological parameters. The high concentration of metals in the wet period suggests that rain assists the cleaning of the atmosphere and that most metals are present in the form of aerosols or fine particles suspended in the air. The findings reveal significant indications of acid rain and pre-treatment is recommended to ensure rainwater can be used safely for more mundane purposes.


Plants ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 328 ◽  
Author(s):  
Ana V. González-de-Peredo ◽  
Mercedes Vázquez-Espinosa ◽  
Estrella Espada-Bellido ◽  
Marta Ferreiro-González ◽  
Antonio Amores-Arrocha ◽  
...  

Myrtus communis L. is an evergreen shrub that produces berries with a high content in antioxidant compounds. Since these compounds have demonstrated a positive effect on human health, the interest on berries and their usages has increased. However, environmental conditions may affect the productivity of these species and consequently the quality of wild myrtle. Ecotypes from diverse geographical origins may result in significant variations in terms of bioactive compounds content as well as in chemical traits. For this reason, in this work ecotypes from two different localizations have been studied to determine if their differences in morphological and anthocyanins traits can be attributed to their origin and the environmental characteristics of these locations. For this, chemometric analyses such as Hierarchical Cluster Analysis and Principal Component Analysis, were employed. The results showed differences between the ecotypes depending on their location. In particular, myrtle berries from maritime zones present greater fruit size and amount of bioactive compounds, which means an improvement in the quality of the final product based on this raw material. It can be concluded that both morphological and anthocyanins traits are related to the location of the ecotype and allow selecting the best ecotype for the required applications.


2017 ◽  
Vol 119 (9) ◽  
pp. 2117-2127 ◽  
Author(s):  
Leonardo Fonseca Maciel ◽  
Ana Lúcia de Souza Madureira Felício ◽  
Elisa Yoko Hirooka

Purpose Many factors can influence the bioactive compounds in cocoa beans. The purpose of this paper is to characterize the bioactive compound profile of 12 cocoa bean clones produced in Bahia’s Southern region. Design/methodology/approach Total phenolic content, total flavonoids and total anthocyanins were determined using spectrophotometric methods. Caffeic acid, caffeine, theobromine, catechin and epicatechin contents were determined using Ultra Performance Liquid Chromatography with a Photodiode Array Detector. Principal component analysis (PCA) was carried out using to determine the variability of the results found in relation to the clones studied. Findings The authors observed variations in the bioactive compound content between the analyzed cocoa clones. The SRN clone showed the highest levels of phenolic content, flavonoids, caffeine, catechin, and epicatechin. PCA showed that all the clones had unique characteristics related to the composition of their bioactive compounds content, classifying each clone in a well-defined manner. Originality/value This work is an important contribution for the characterization of new cocoa bean clones in relation to their content of bioactive compounds. The information reported in this paper can be decisive in the choice of the variety of cocoa in the production of chocolate with high bioactive compounds content and claim of functional property.


Sign in / Sign up

Export Citation Format

Share Document