scholarly journals Immobilization of Soybean Lipoxygenase on Nanoporous Rice Husk Silica by Adsorption: Retention of Enzyme Function and Catalytic Potential

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 291
Author(s):  
Putheary Ngin ◽  
Kyoungwon Cho ◽  
Oksoo Han
Keyword(s):  
Thermal Stability ◽  
Rice Husk ◽  
Thermal Inactivation ◽  
Specific Activity ◽  
Silica Particles ◽  
Soybean Lipoxygenase ◽  
Desorption Kinetics ◽  
Rice Husk Silica ◽  
Kinetics Of ◽  
Thermal Stability Of

Soybean lipoxygenase was immobilized on nanoporous rice husk silica particles by adsorption, and enzymatic parameters of the immobilized protein, including the efficiency of substrate binding and catalysis, kinetic and operational stability, and the kinetics of thermal inactivation, were investigated. The maximal adsorption efficiency of soybean lipoxygenase to the silica particles was 50%. The desorption kinetics of soybean lipoxygenase from the silica particles indicate that the silica-immobilized enzyme is more stable in an anionic buffer (sodium phosphate, pH 7.2) than in a cationic buffer (Tris-HCl, pH 7.2). The specific activity of immobilized lipoxygenase was 73% of the specific activity of soluble soybean lipoxygenase at a high concentration of substrate. The catalytic efficiency (kcat/Km) and the Michaelis–Menten constant (Km) of immobilized lipoxygenase were 21% and 49% of kcat/Km and Km of soluble soybean lipoxygenase, respectively, at a low concentration of substrate. The immobilized soybean lipoxygenase was relatively stable, as the enzyme specific activity was >90% of the initial activity after four assay cycles. The thermal stability of the immobilized lipoxygenase was higher than the thermal stability of soluble lipoxygenase, demonstrating 70% and 45% of its optimal specific activity, respectively, after incubation for 30 min at 45 °C. These results demonstrate that adsorption on nanoporous rice husk silica is a simple and rapid method for protein immobilization, and that adsorption may be a useful and facile method for the immobilization of many biologically important proteins of interest.

A New Flame-Retardant Epoxy Composites Based on Silica and Metal Salt of Phosphinate

2013 ◽  
Vol 357-360 ◽  
pp. 1461-1464 ◽  
Author(s):  
Xue Qing Liu ◽  
Heng Zhou ◽  
Ji Yan Liu ◽  
Hao Wang ◽  
Shao Jun Cai
Keyword(s):  
Mechanical Properties ◽  
Thermal Stability ◽  
Rice Husk ◽  
Oxygen Index ◽  
Metal Salt ◽  
Synergistic Effects ◽  
Combustion Time ◽  
Limiting Oxygen Index ◽  
Rice Husk Silica ◽  
Thermal Stability Of

The influence of silica on the mechanical properties, thermal stability and the flammability of epoxy (EP) blended with aluminum methylethylphosphinate (Al (MEP) has been studied by the limiting oxygen index (LOI), UL-94 test, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). Results show that adding silica enhances the mechanical properties of EP/Al (MEP). Synergistic effects between Al (MEP) and silica are obtained leading to the increase of LOI and to the reduction of combustion time. The TGA data demonstrate that silica can enhance the thermal stability of the EP/Al (MEP) and increase the char residue formation at high temperature. When the rice husk silica is substituted for silica, the composite presents lower LOI, lower thermal stability and char formation as well as inferior mechanical strength. The SEM results indicate that rice husk silica based composite shows poorer fillermatrix adhesion, which will be responsible for its inferior mechanical properties, lower thermal stability and flammability.

The Ordered Phase Formation in Ti-Al-Ga Alloys

1970 ◽  
Vol 28 ◽  
pp. 440-441
Author(s):  
Shiro Fujishiro ◽  
Harold L. Gegel
Keyword(s):  
Thermal Stability ◽  
High Temperature ◽  
Titanium Alloys ◽  
Growth Kinetics ◽  
Stoichiometric Composition ◽  
Good Potential ◽  
Alpha Titanium ◽  
Cold Rolled ◽  
Kinetics Of ◽  
Thermal Stability Of

Ordered-alpha titanium alloys having a DO19 type structure have good potential for high temperature (600°C) applications, due to the thermal stability of the ordered phase and the inherent resistance to recrystallization of these alloys. Five different Ti-Al-Ga alloys consisting of equal atomic percents of aluminum and gallium solute additions up to the stoichiometric composition, Ti3(Al, Ga), were used to study the growth kinetics of the ordered phase and the nature of its interface.The alloys were homogenized in the beta region in a vacuum of about 5×10-7 torr, furnace cooled; reheated in air to 50°C below the alpha transus for hot working. The alloys were subsequently acid cleaned, annealed in vacuo, and cold rolled to about. 050 inch prior to additional homogenization

scholarly journals Isothermal Vulcanization and Non-Isothermal Degradation Kinetics of XNBR/Epoxy/XNBR-g-Halloysite Nanotubes (HNT) Nanocomposites

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2872
Author(s):  
Seyed Mohamad Reza Paran ◽  
Ghasem Naderi ◽  
Elnaz Movahedifar ◽  
Maryam Jouyandeh ◽  
Krzysztof Formela ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Degradation Kinetics ◽  
Halloysite Nanotubes ◽  
Butadiene Rubber ◽  
Order Model ◽  
Scanning Calorimetry ◽  
Theoretical Methods ◽  
Vulcanization Kinetics ◽  
Kinetics Of ◽  
Thermal Stability Of

The effect of several concentrations of carboxylated nitrile butadiene rubber (XNBR) functionalized halloysite nanotubes (XHNTs) on the vulcanization and degradation kinetics of XNBR/epoxy compounds were evaluated using experimental and theoretical methods. The isothermal vulcanization kinetics were studied at various temperatures by rheometry and differential scanning calorimetry (DSC). The results obtained indicated that the nth order model could not accurately predict the curing performance. However, the autocatalytic approach can be used to estimate the vulcanization reaction mechanism of XNBR/epoxy/XHNTs nanocomposites. The kinetic parameters related to the degradation of XNBR/epoxy/XHNTs nanocomposites were also assessed using thermogravimetric analysis (TGA). TGA measurements suggested that the grafted nanotubes strongly enhanced the thermal stability of the nanocomposite.

Binding of 3-phosphoglycerate leads to both activation and stabilisation of ADP-glucose pyrophosphorylase from apple leaves

2005 ◽  
Vol 32 (9) ◽  
pp. 839
Author(s):  
Rui Zhou ◽  
Lailiang Cheng
Keyword(s):  
Heat Treatment ◽  
Thermal Stability ◽  
Enzyme Activity ◽  
Inorganic Phosphate ◽  
Thermal Inactivation ◽  
Specific Activity ◽  
Apple Leaves ◽  
Apparent Homogeneity ◽  
Adp Glucose Pyrophosphorylase ◽  
High Concentrations

Apple leaf ADP-glucose pyrophosphorylase was purified 1436-fold to apparent homogeneity with a specific activity of 58.9 units mg–1. The enzyme was activated by 3-phosphoglycerate (PGA) and inhibited by inorganic phosphate (Pi) in the ADPG synthesis direction. In the pyrophosphorolytic direction, however, high concentrations of PGA (> 2.5 mm) inhibited the enzyme activity. The enzyme was resistant to thermal inactivation with a T0.5 (temperature at which 50% of the enzyme activity is lost after 5 min incubation) of 52°C. Incubation with 2 mm PGA or 2 mm Pi increased T0.5 to 68°C. Incubation with 2 mm dithiothreitol (DTT) decreased T0.5 to 42°C, whereas inclusion of 2 mm PGA in the DTT incubation maintained T0.5 at 52°C. DTT-induced decrease in thermal stability was accompanied by monomerisation of the small subunits. Presence of PGA in the DTT incubation did not alter the monomerisation of the small subunits of the enzyme induced by DTT. These findings indicate that binding of PGA renders apple leaf AGPase with a conformation that is not only more efficient in catalysis but also more stable to heat treatment. The physiological significance of the protective effect of PGA on thermal inactivation of AGPase is discussed.

Thermal Breakdown Kinetics of 1-Ethyl-3-Methylimidazolium Ethylsulfate Measured Using Quantitative Infrared Spectroscopy

2017 ◽  
Vol 71 (12) ◽  
pp. 2626-2631 ◽  
Author(s):  
Jeffrey L. Wheeler ◽  
McKinley Pugh ◽  
S. Jake Atkins ◽  
Jason M. Porter
Keyword(s):  
Thermal Stability ◽  
Room Temperature ◽  
Computational Models ◽  
Elevated Temperatures ◽  
Molar Absorptivity ◽  
Ir Absorption ◽  
Optical Cell ◽  
Multiple Samples ◽  
Kinetics Of ◽  
Thermal Stability Of

In this work, the thermal stability of the room temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM][EtSO4]) is investigated using infrared (IR) spectroscopy. Quantitative IR absorption spectral data are measured for heated [EMIM][EtSO4]. Spectra have been collected between 25 ℃ and 100 ℃ using a heated optical cell. Multiple samples and cell pathlengths are used to determine quantitative values for the molar absorptivity of [EMIM][EtSO4]. These results are compared to previous computational models of the ion pair. These quantitative spectra are used to measure the rate of thermal decomposition of [EMIM][EtSO4] at elevated temperatures. The spectroscopic measurements of the rate of decomposition show that thermogravimetric methods overestimate the thermal stability of [EMIM][EtSO4].

Sign in / Sign up

Export Citation Format

Share Document