scholarly journals Self-Assembly of Low-Molecular-Weight Asymmetric Linear Triblock Terpolymers: How Low Can We Go?

Molecules ◽  
2020 ◽  
Vol 25 (23) ◽  
pp. 5527
Author(s):  
Christina Miskaki ◽  
Ioannis Moutsios ◽  
Gkreti-Maria Manesi ◽  
Konstantinos Artopoiadis ◽  
Cheng-Yen Chang ◽  
...  
Keyword(s):  
Self Assembly ◽  
Low Molecular Weight ◽  
Ordered Structures ◽  
Low Dimensions ◽  
X Ray ◽  
Molecular Weights ◽  
Transmission Electron ◽  
First Time ◽  
Triblock Terpolymers ◽  
Structure Properties

The synthesis of two (2) novel triblock terpolymers of the ABC type and one (1) of the BAC type, where A, B and C are chemically different segments, such as polystyrene (PS), poly(butadiene) (PB1,4) and poly(dimethylsiloxane) (PDMS), is reported; moreover, their corresponding molecular and bulk characterizations were performed. Very low dimensions are evident from the characterization in bulk from transmission electron microscopy studies, verified by small-angle X-ray data, since sub-16 nm domains are evident in all three cases. The self-assembly results justify the assumptions that the high Flory–Huggins parameter, χ, even in low molecular weights, leads to significantly well-ordered structures, despite the complexity of the systems studied. Furthermore, it is the first time that a structure/properties relationship was studied for such systems in bulk, potentially leading to prominent applications in nanotechnology and nanopatterning, for as low as sub-10 nm thin-film manipulations.

Lawson Cypress Leaf-Like ZnO Hierarchical Nanostructures by Self-Assembly

2014 ◽  
Vol 809-810 ◽  
pp. 131-135
Author(s):  
Xiao Ping Zou ◽  
Chuan Zhao ◽  
Xue Ming Lv
Keyword(s):  
Self Assembly ◽  
Annealing Process ◽  
X Ray Diffraction ◽  
Hierarchical Nanostructures ◽  
X Ray ◽  
Zno Nanostructure ◽  
Transmission Electron ◽  
Potential Applications ◽  
First Time ◽  
Scanning Electron

In this letter, Lawson cypress leaf-like ZnO hierarchical nanostructures with new and interesting morphology were synthesized by electrodeposition in aqueous solution of Zn (NO3)2followed by annealing process, this structure was the first time appearing in ZnO nanostructure. The obtained Lawson cypress leaf-like ZnO hierarchical nanostructures were composed of ZnO nanoparticles with the grain size about 100~200 nm, were observed by scanning electron microscope (SEM), ZnO was detected by X-ray diffraction (XRD), and the highly crystalline structure was demonstrated by high-resolution transmission electron microscopy (HRTEM). Lawson cypress leaf-like ZnO hierarchical nanostructures, which are well-controlled in diameter, space and thickness, have potential applications in photoelectronic devices, sensors, solar cells and nanometer devices.

scholarly journals Quartz Crystallite Size and Moganite Content as Indicators of the Mineralogical Maturity of the Carboniferous Chert: The Case of Cherts from Eastern Asturias (Spain)

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Crystallite Size ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared And Raman Spectroscopy ◽  
First Time ◽  
Geological Formations

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.

scholarly journals The Effect of Surfactant-Modified Montmorillonite on the Cross-Linking Efficiency of Polysiloxanes

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2623
Author(s):  
Monika Wójcik-Bania ◽  
Jakub Matusik
Keyword(s):  
Total Pore Volume ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
The Cross ◽  
Chain Lengths ◽  
First Time ◽  
Substituent Influence ◽  
Benzyl Substituent

Polymer–clay mineral composites are an important class of materials with various applications in the industry. Despite interesting properties of polysiloxanes, such matrices were rarely used in combination with clay minerals. Thus, for the first time, a systematic study was designed to investigate the cross-linking efficiency of polysiloxane networks in the presence of 2 wt % of organo-montmorillonite. Montmorillonite (Mt) was intercalated with six quaternary ammonium salts of the cation structure [(CH3)2R’NR]+, where R = C12, C14, C16, and R’ = methyl or benzyl substituent. The intercalation efficiency was examined by X-ray diffraction, CHN elemental analysis, and Fourier transform infrared (FTIR) spectroscopy. Textural studies have shown that the application of freezing in liquid nitrogen and freeze-drying after the intercalation increases the specific surface area and the total pore volume of organo-Mt. The polymer matrix was a poly(methylhydrosiloxane) cross-linked with two linear vinylsiloxanes of different siloxane chain lengths between end functional groups. X-ray diffraction and transmission electron microscopy studies have shown that the increase in d-spacing of organo-Mt and the benzyl substituent influence the degree of nanofillers’ exfoliation in the nanocomposites. The increase in the degree of organo-Mt exfoliation reduces the efficiency of hydrosilylation reaction monitored by FTIR. This was due to physical hindrance induced by exfoliated Mt particles.

scholarly journals Alpha helical surfactant-like peptides self-assemble into pH-dependent nanostructures

Soft Matter ◽  
2021 ◽  
Vol 17 (11) ◽  
pp. 3096-3104
Author(s):  
Valeria Castelletto ◽  
Jani Seitsonen ◽  
Janne Ruokolainen ◽  
Ian W. Hamley
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Small Angle ◽  
Self Assembly ◽  
X Ray ◽  
Cryogenic Transmission Electron Microscopy ◽  
X Ray Scattering ◽  
Transmission Electron ◽  
Ph Dependent ◽  
Ray Scattering

A designed surfactant-like peptide is shown, using a combination of cryogenic-transmission electron microscopy and small-angle X-ray scattering, to have remarkable pH-dependent self-assembly properties.

scholarly journals Chirality, Gelation Ability and Crystal Structure: Together or Apart? Alkyl Phenyl Ethers of Glycerol as Simple LMWGs

Symmetry ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 732
Author(s):  
Alexander A. Bredikhin ◽  
Aidar T. Gubaidullin ◽  
Zemfira A. Bredikhina ◽  
Robert R. Fayzullin ◽  
Olga A. Lodochnikova
Keyword(s):  
Self Assembly ◽  
Chiral Recognition ◽  
Soft Materials ◽  
Gelling Agent ◽  
Low Molecular Weight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Different Types ◽  
Low Molecular Weight Gelators ◽  
Phenyl Ethers

Chiral recognition plays an important role in the self-assembly of soft materials, in particular supramolecular organogels formed by low molecular weight gelators (LMWGs). Out of 14 pairs of the studied racemic and enantiopure samples of alkyl-substituted phenyl ethers of glycerol, only eight enantiopure diols form the stable gels in nonane. The formation of gels from solutions was studied by polarimetry, and their degradation with the formation of xerogels was studied by the PXRD method. The revealed crystalline characteristics of all studied xerogels corresponded to those for crystalline samples of the parent gelators. In addition to those previously investigated, crystalline samples of enantiopure para-n-alkylphenyl glycerol ethers [alkyl = pentyl (5), hexyl (6), heptyl (7), octyl (8), nonyl (9)] and racemic 3-(3,5-dimethylphenoxy)propane-1,2-diol (rac-14) have been examined by single crystal X-ray diffraction analysis. Among 22 samples of compounds 1-14 studied by SC-XRD, seven different types of supramolecular motifs are identified, of which only two are realized in crystals of supramolecular gelators. An attempt was made to relate the ability to gel formation with the characteristics of the supramolecular motif of a potential gelling agent, and the frequency of formation of the motif, required for gelation, with the chiral characteristics of the sample.

scholarly journals Low-temperature hydrothermal synthesis of hierarchical flower-like CuB2O4 superstructures

2020 ◽  
Vol 14 (2) ◽  
pp. 113-118
Author(s):  
Daniel Ursu ◽  
Anamaria Dabici ◽  
Marinela Miclau ◽  
Nicolae Miclau
Keyword(s):  
Thermal Stability ◽  
Low Temperature ◽  
Self Assembly ◽  
Hydrothermal Solution ◽  
Optical Measurements ◽  
Oriented Attachment ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
One Step

We report for the first time the fabrication of hierarchical ordered superstructure CuB2O4 with flower-like morphology via a one-step, low temperature hydrothermal method. The tetragonal structure of CuB2O4 was determined by X-ray diffraction and high-resolution transmission electron microscopy. Optical measurements attested of the quality of the fabricated CuB2O4 and high temperature X-ray diffraction confirmed its thermal stability up to 600 ?C. The oriented attachment growth and the hierarchical self-assembly of micrometer-sized platelets producing hierarchical superstructures with flower-like morphology are designed by pH of the hydrothermal solution. The excellent band gap, high thermal stability and hierarchical structure of the CuB2O4 are promising for the photovoltaic and photocatalytic applications.

Boron Nitride Nanotubes: Nanoparticles Functionalization and Junction Fabrication

2007 ◽  
Vol 7 (2) ◽  
pp. 530-534 ◽  
Author(s):  
Chunyi Zhi ◽  
Yoshio Bando ◽  
Guozhen Shen ◽  
Chengchun Tang ◽  
Dmitri Golberg
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Boron Nitride ◽  
Boron Nitride Nanotubes ◽  
X Ray Diffraction ◽  
Carbon Nanostructure ◽  
Wet Chemistry ◽  
X Ray ◽  
Transmission Electron ◽  
First Time

Adopting a wet chemistry method, Au and Fe3O4 nanoparticles were functionalized on boron nitride nanotubes (BNNTs) successfully for the first time. X-ray diffraction pattern and transmission electron microscopy were used to characterize the resultant products. Subsequently, a method was proposed to fabricate heterojunction structures based on the particle-functionalized BNNTs. As a demonstration, BNNT-carbon nanostructure, BNNT-ZnO and BNNT-Ga2O3 junctions were successfully fabricated using the functionalized particles as catalysts.

Click Synthesis of Shape-Persistent Azodendrimers and their Orthogonal Self-Assembly to Nanofibres

2018 ◽  
Vol 71 (6) ◽  
pp. 463 ◽  
Author(s):  
Tamer El Malah ◽  
Hany F. Nour
Keyword(s):  
Electron Microscopy ◽  
Mass Spectrometry ◽  
Self Assembly ◽  
Molecular Structures ◽  
Side Chain ◽  
Spectroscopic Techniques ◽  
Molecular Weights ◽  
Transmission Electron ◽  
Click Synthesis ◽  
Scanning Electron

The copper(i)-catalyzed azide–alkyne cycloaddition (CuAAC) reaction has been efficiently utilized to synthesize a series of dendrons with amino functionalities. The aminodendrons successfully underwent azodimerization to furnish a series of pyridyl- and phenyl-based azodendrimers with peripheral alkyl or ether side chain substituents. The molecular structures of the azodendrimers were fully assigned using different spectroscopic techniques, such as 1H NMR and 13C NMR, and the molecular weights were determined using MALDI-TOF mass spectrometry. The molecular self-assembly of the azodendrimers was investigated by scanning electron microscopy and transmission electron microscopy, which revealed the formation of highly ordered and uniform self-assembled nanofibres.

scholarly journals Formation of ZnO/Zn0.5Cd0.5Se Alloy Quantum Dots in the Presence of High Oleylamine Contents

Nanomaterials ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 999
Author(s):  
Yi-An Chen ◽  
Kuo-Hsien Chou ◽  
Yi-Yang Kuo ◽  
Cheng-Ye Wu ◽  
Po-Wen Hsiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Particle Size ◽  
X Ray Diffraction ◽  
One Pot ◽  
X Ray ◽  
Transmission Electron ◽  
Average Size ◽  
Alloy Quantum Dots ◽  
First Time

To the best of our knowledge, this report presents, for the first time, the schematic of the possible chemical reaction for a one-pot synthesis of Zn0.5Cd0.5Se alloy quantum dots (QDs) in the presence of low/high oleylamine (OLA) contents. For high OLA contents, high-resolution transmission electron microscopy (HRTEM) results showed that the average size of Zn0.5Cd0.5Se increases significantly from 4 to 9 nm with an increasing OLA content from 4 to 10 mL. First, [Zn(OAc)2]–OLA complex can be formed by a reaction between Zn(OAc)2 and OLA. Then, Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) data confirmed that ZnO is formed by thermal decomposition of the [Zn(OAc)2]–OLA complex. The results indicated that ZnO grew on the Zn0.5Cd0.5Se surface, thus increasing the particle size. For low OLA contents, HRTEM images were used to estimate the average sizes of the Zn0.5Cd0.5Se alloy QDs, which were approximately 8, 6, and 4 nm with OLA loadings of 0, 2, and 4 mL, respectively. We found that Zn(OAc)2 and OLA could form a [Zn(OAc)2]–OLA complex, which inhibited the growth of the Zn0.5Cd0.5Se alloy QDs, due to the decreasing reaction between Zn(oleic acid)2 and Se2−, which led to a decrease in particle size.

scholarly journals Defective TiO2 Core-Shell Magnetic Photocatalyst Modified with Plasmonic Nanoparticles for Visible Light-Induced Photocatalytic Activity

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 672 ◽  
Author(s):  
Zuzanna Bielan ◽  
Agnieszka Sulowska ◽  
Szymon Dudziak ◽  
Katarzyna Siuzdak ◽  
Jacek Ryl ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Phenol Degradation ◽  
Magnetic Core ◽  
Magnetic Photocatalyst ◽  
X Ray ◽  
Transmission Electron ◽  
First Time

In the presented work, for the first time, the metal-modified defective titanium(IV) oxide nanoparticles with well-defined titanium vacancies, was successfully obtained. Introducing platinum and copper nanoparticles (NPs) as surface modifiers of defective d-TiO2 significantly increased the photocatalytic activity in both UV-Vis and Vis light ranges. Moreover, metal NPs deposition on the magnetic core allowed for the effective separation and reuse of the nanometer-sized photocatalyst from the suspension after the treatment process. The obtained Fe3O4@SiO2/d-TiO2-Pt/Cu photocatalysts were characterized by X-ray diffractometry (XRD) and specific surface area (BET) measurements, UV-Vis diffuse reflectance spectroscopy (DR-UV/Vis), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Further, the mechanism of phenol degradation and the role of four oxidative species (h+, e−, •OH, and •O2−) in the studied photocatalytic process were investigated.

Sign in / Sign up

Export Citation Format

Share Document