scholarly journals Nonlocal Buckling Analysis of Composite Curved Beams Reinforced with Functionally Graded Carbon Nanotubes

Molecules ◽  
2019 ◽  
Vol 24 (15) ◽  
pp. 2750 ◽  
Author(s):  
Behrouz Karami ◽  
Maziar Janghorban ◽  
Davood Shahsavari ◽  
Rossana Dimitri ◽  
Francesco Tornabene
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Slenderness Ratio ◽  
Nonlocal Parameter ◽  
Beam Theory ◽  
Functionally Graded ◽  
Opening Angle ◽  
Curved Beams ◽  
Differential Model ◽  
Mechanical Buckling

This work deals with the size-dependent buckling response of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) (FG-CNTRC) curved beams based on a higher-order shear deformation beam theory in conjunction with the Eringen Nonlocal Differential Model (ENDM). The material properties were estimated using the rule of mixtures. The Hamiltonian principle was employed to derive the governing equations of the problem which were, in turn, solved via the Galerkin method to obtain the critical buckling load of FG-CNTRC curved beams with different boundary conditions. A detailed parametric study was carried out to investigate the influence of the nonlocal parameter, CNTs volume fraction, opening angle, slenderness ratio, and boundary conditions on the mechanical buckling characteristics of FG-CNTRC curved beams. A large parametric investigation was performed on the mechanical buckling behavior of FG-CNTRC curved beams, which included different CNT distribution schemes, as useful for design purposes in many practical engineering applications.

Exact solutions for the bending of Timoshenko beams using Eringen’s two-phase nonlocal model

2018 ◽  
Vol 24 (3) ◽  
pp. 559-572 ◽  
Author(s):  
Yuanbin Wang ◽  
Kai Huang ◽  
Xiaowu Zhu ◽  
Zhimei Lou
Keyword(s):  
Differential Equations ◽  
Boundary Conditions ◽  
Exact Solutions ◽  
Nonlocal Parameter ◽  
Beam Theory ◽  
Nonlocal Model ◽  
Bernoulli Beam ◽  
Two Phase ◽  
Differential Model ◽  
Euler Bernoulli Beam

Eringen’s nonlocal differential model has been widely used in the literature to predict the size effect in nanostructures. However, this model often gives rise to paradoxes, such as the cantilever beam under end-point loading. Recent studies of the nonlocal integral models based on Euler–Bernoulli beam theory overcome the aforementioned inconsistency. In this paper, we carry out an analytical study of the bending problem based on Eringen’s two-phase nonlocal model and Timoshenko beam theory, which accounts for a better representation of the bending behavior of short, stubby nanobeams where the nonlocal effect and transverse shear deformation are significant. The governing equations are established by the principal of virtual work, which turns out to be a system of integro-differential equations. With the help of a reduction method, the complicated system is reduced to a system of differential equations with mixed boundary conditions. After some detailed calculations, exact analytical solutions are obtained explicitly for four types of boundary conditions. Asymptotic analysis of the exact solutions reveals clearly that the nonlocal parameter has the effect of increasing the deflections. In addition, as compared with nonlocal Euler–Bernoulli beam, the shear effect is evident, and an additional scale effect is captured, indicating the importance of applying higher-order beam theories in the analysis of nanostructures.

scholarly journals Finite Element Analysis of Functionally Graded Beams using Different Beam Theories

2020 ◽  
Vol 6 (11) ◽  
pp. 2086-2102
Author(s):  
Farshad Rahmani ◽  
Reza Kamgar ◽  
Reza Rahgozar
Keyword(s):  
Finite Element ◽  
Boundary Conditions ◽  
Power Law ◽  
Volume Fraction ◽  
Slenderness Ratio ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Transverse Shear Strain ◽  
Material Distribution ◽  
Beam Theories

The present study deals with buckling, free vibration, and bending analysis of Functionally Graded (FG) and porous FG beams based on various beam theories. Equation of motion and boundary conditions are derived from Hamilton’s principle, and the finite element method is adopted to solve problems numerically. The FG beams are graded through the thickness direction, and the material distribution is controlled by power-law volume fraction. The effects of the different values of the power-law index, porosity exponent, and different boundary conditions on bending, natural frequencies and buckling characteristics are also studied. A new function is introduced to approximate the transverse shear strain in higher-order shear deformation theory. Furthermore, shifting the position of the neutral axis is taken into account. The results obtained numerically are validated with results obtained from ANSYS and those available in the previous work. The results of this study specify the crucial role of slenderness ratio, material distribution, and porosity condition on the characteristic of FG beams. The deflection results obtained by the proposed function have a maximum of six percent difference when the results are compared with ANSYS. It also has better results in comparison with the Reddy formulae, especially when the beam becomes slender. Doi: 10.28991/cej-2020-03091604 Full Text: PDF

scholarly journals Modeling the Size Effect on the Mechanical Behavior of Functionally Graded Curved Micro/Nanobeam

2018 ◽  
Vol 1 (2) ◽  
Author(s):  
Seyyed Amirhosein Hosseini1 ◽  
O. Rahmani2
Keyword(s):  
Size Effect ◽  
Boundary Conditions ◽  
Natural Frequencies ◽  
Power Index ◽  
Nonlocal Parameter ◽  
Functionally Graded ◽  
Opening Angle ◽  
Simply Supported ◽  
Fg Nanobeam ◽  
Good Agreement

The size effect on the free vibration and bending of a curved FG micro/nanobeam is studied in this paper. Using the Hamilton principle the differential equations and boundary conditions is derived for a nonlocal Euler-Bernoulli curved micro/nanobeam.  The material properties vary through radius direction. Using the Navier approach an analytical solution for simply supported boundary conditions is obtained where the power index law of FGM, the curved micro/nanobeam opening angle, the effect of aspect ratio and nonlocal parameter on natural frequencies and the radial and tangential displacements were analyzed. It is concluded that increasing the curved micro/nanobeam opening angle results in decreasing and increasing the frequencies and displacements, respectively. To validate the natural frequencies of curved nanobeam, when the radius of it approaches to infinity, is compared with a straight FG nanobeam and showed a good agreement.

Free vibration problem of embedded magneto-electro-thermo-elastic nanoplate made of functionally graded materials via nonlocal third-order shear deformation theory

2017 ◽  
Vol 29 (5) ◽  
pp. 741-763 ◽  
Author(s):  
Ali Kiani ◽  
Moslem Sheikhkhoshkar ◽  
Ali Jamalpoor ◽  
Mostafa Khanzadi
Keyword(s):  
Boundary Conditions ◽  
Functionally Graded Materials ◽  
Volume Fraction ◽  
Nonlocal Parameter ◽  
Plate Thickness ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Third Order ◽  
Graded Materials ◽  
Simply Supported

In the present article, according to the nonlocal elasticity theory within the framework of the third-order shear deformable plate assumption, the theoretical analysis of thermomechanical vibration response of magneto-electro-thermo-elastic nanoplate made of functionally graded materials resting on the visco-Pasternak medium is carried out. The simply supported magneto-electro-thermo-elastic nanoplate is supposed to subject to initial external electric, magnetic potentials, and temperature environment. The material characteristics of magneto-electro-thermo-elastic nanoplate are assumed to be variable continuously across the thickness direction based upon power law distribution. Hamilton’s principle is utilized to achieve the partial differential equations and corresponding boundary conditions. The equilibrium equations are solved analytically to determine the complex eigenfrequency using Navier’s approach which satisfies the simply supported boundary conditions. Numerical studies are performed to illustrate the dependency of the natural frequency of the system on the damping coefficient of the visco-Pasternak medium, nonlocal parameter, aspect ratio, temperature change, volume fraction index of functionally graded material, initial external electric voltage, initial external magnetic potential, and plate thickness. It is clearly indicated that these factors have highly significant impacts on the dynamic behavior of the proposed system.

Thermoelastic Vibration of Shear Deformable Functionally Graded Curved Beams with Microstructural Defects

2018 ◽  
Vol 18 (11) ◽  
pp. 1850135 ◽  
Author(s):  
Mohammad Amir ◽  
Mohammad Talha
Keyword(s):  
Material Properties ◽  
Volume Fraction ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Opening Angle ◽  
Curved Beams ◽  
Microstructural Defects ◽  
Thermoelastic Vibration ◽  
Benchmark Solutions ◽  
Shear Deformable

In the present study, the thermoelastic vibration of shear deformable functionally graded material (FGM) curved beams with microstructural defects (porosity) has been analyzed by the finite element method. The formulation is based on the higher-order shear deformation theory. The material properties of FGM beams are allowed to vary continuously in the thickness direction by a simple power-law distribution in terms of the volume fractions of the constituents. Even and uneven distributions of porosities in the beam have been considered with temperature-dependent material properties. Comparison and convergence study has been performed to validate the present formulation. Parametric studies have been done to study the effect of different influencing parameters on the frequency of the FGM curved beam, i.e. porosity, temperature rise, volume fraction index and opening angle. Some new results are presented which can be used as benchmark solutions for future research.

Size-dependent vibration of functionally graded rotating nanobeams with different boundary conditions based on nonlocal elasticity theory

2021 ◽  
pp. 095440622110380
Author(s):  
Jianshi Fang ◽  
Bo Yin ◽  
Xiaopeng Zhang ◽  
Bin Yang
Keyword(s):  
Angular Velocity ◽  
Boundary Conditions ◽  
Elasticity Theory ◽  
Nonlocal Elasticity ◽  
Slenderness Ratio ◽  
Nonlocal Parameter ◽  
Nonlocal Elasticity Theory ◽  
Functionally Graded ◽  
Different Boundary Conditions ◽  
Gradient Variation

The free vibration of rotating functionally graded nanobeams under different boundary conditions is studied based on nonlocal elasticity theory within the framework of Euler-Bernoulli and Timoshenko beam theories. The thickness-wise material gradient variation of the nanobeam is considered. By introducing a second-order axial shortening term into the displacement field, the governing equations of motion of the present new nonlocal model of rotating nanobeams are derived by the Hamilton’s principle. The nonlocal differential equations are solved through the Galerkin method. The present nonlocal models are validated through the convergence and comparison studies. Numerical results are presented to investigate the influences of the nonlocal parameter, angular velocity, material gradient variation together with slenderness ratio on the vibration of rotating FG nanobeams with different boundary conditions. Totally different from stationary nanobeams, the rotating nanobeams with relatively high angular velocity could produce larger fundamental frequencies than local counterparts. Additionally, the axial stretching-transverse bending coupled vibration is perfectly shown through the frequency loci veering and modal conversion.

Effect of In-Plane Load and Thermal Environment on Buckling and Vibration Behavior of Two-Dimensional Functionally Graded Tapered Timoshenko Nanobeam

2020 ◽  
Vol 143 (1) ◽  
Author(s):  
Roshan Lal ◽  
Chinika Dangi
Keyword(s):  
Thermal Environment ◽  
Slenderness Ratio ◽  
Differential Quadrature Method ◽  
Equations Of Motion ◽  
Nonlocal Parameter ◽  
Beam Theory ◽  
Functionally Graded ◽  
Two Dimensional ◽  
Power Law Distribution ◽  
Energy Principle

Abstract In this work, buckling and vibration characteristics of two-dimensional functionally graded (FG) nanobeam of nonuniform thickness subjected to in-plane and thermal loads have been analyzed within the frame work of Timoshenko beam theory. The beam is tapered by linear variation in thickness along the length. The temperature-dependent material properties of the beam are varying along thickness and length as per a power-law distribution and exponential function, respectively. The analysis has been presented using Eringen’s nonlocal theory to incorporate the size effect. Hamilton’s energy principle has been used to formulate the governing equations of motion. These resulting equations have been solved via generalized differential quadrature method (GDQM) for three combinations of clamped and simply supported boundary conditions. The effect of in-plane load together with temperature variation, nonuniformity parameter, gradient indices, nonlocal parameter, and slenderness ratio on the natural frequencies is illustrated for the first three modes of vibration. The critical buckling loads in compression have been computed by putting the frequencies equal to zero. A significant contribution of in-plane load on mechanical behavior of two-directional functionally graded nanobeam with nonuniform cross section has been noticed. Results are in good accordance.

scholarly journals Large deformation behavior of functionally graded porous curved beams in thermal environment

2021 ◽  
Author(s):  
S. F. Nikrad ◽  
A. Kanellopoulos ◽  
M. Bodaghi ◽  
Z. T. Chen ◽  
A. Pourasghar
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Thermal Environment ◽  
Ritz Method ◽  
Shear Deformation Theory ◽  
Bending Moment ◽  
Functionally Graded ◽  
Equilibrium Path ◽  
Curved Beams ◽  
Governing Equations

AbstractThe in-plane thermoelastic response of curved beams made of porous materials with different types of functionally graded (FG) porosity is studied in this research contribution. Nonlinear governing equations are derived based on the first-order shear deformation theory along with the nonlinear Green strains. The nonlinear governing equations are solved by the aid of the Rayleigh–Ritz method along with the Newton–Raphson method. The modified rule-of-mixture is employed to derive the material properties of imperfect FG porous curved beams. Comprehensive parametric studies are conducted to explore the effects of volume fraction and various dispersion patterns of porosities, temperature field, and arch geometry as well as boundary conditions on the nonlinear equilibrium path and stability behavior of the FG porous curved beams. Results reveal that dispersion and volume fraction of porosities have a significant effect on the thermal stability path, maximum stress, and bending moment at the crown of the curved beams. Moreover, the influence of porosity dispersion and structural geometry on the central radial and in-plane displacement of the curved beams is evaluated. Results show that various boundary conditions make a considerable difference in the central radial displacements of the curved beams with the same porosity dispersion. Due to the absence of similar results in the specialized literature, this paper is likely to provide pertinent results that are instrumental toward a reliable design of FG porous curved beams in thermal environment.

scholarly journals Thermo-Electro-Mechanical Vibrations of Porous Functionally Graded Piezoelectric Nanoshells

Nanomaterials ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 301 ◽  
Author(s):  
Yun Fei Liu ◽  
Yan Qing Wang
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Nonlocal Parameter ◽  
Nonlocal Elasticity Theory ◽  
Functionally Graded ◽  
Small Scale ◽  
Love’S Shell Theory ◽  
Small Scale Effect ◽  
Functionally Graded Piezoelectric ◽  
The Galerkin Method

In this work, we aim to study free vibration of functionally graded piezoelectric material (FGPM) cylindrical nanoshells with nano-voids. The present model incorporates the small scale effect and thermo-electro-mechanical loading. Two types of porosity distribution, namely, even and uneven distributions, are considered. Based on Love’s shell theory and the nonlocal elasticity theory, governing equations and corresponding boundary conditions are established through Hamilton’s principle. Then, natural frequencies of FGPM nanoshells with nano-voids under different boundary conditions are analyzed by employing the Navier method and the Galerkin method. The present results are verified by the comparison with the published ones. Finally, an extensive parametric study is conducted to examine the effects of the external electric potential, the nonlocal parameter, the volume fraction of nano-voids, the temperature rise on the vibration of porous FGPM cylindrical nanoshells.

Thermal Buckling and Postbuckling Analysis of Functionally Graded Carbon Nanotube-Reinforced Composite Beams

2016 ◽  
Vol 846 ◽  
pp. 182-187 ◽  
Author(s):  
He Long Wu ◽  
Sritawat Kitipornchai ◽  
Jie Yang
Keyword(s):  
Carbon Nanotube ◽  
Volume Fraction ◽  
Slenderness Ratio ◽  
Beam Theory ◽  
Thermal Buckling ◽  
Functionally Graded ◽  
Equilibrium Path ◽  
Temperature Dependent ◽  
Reinforced Composite ◽  
Beam Thickness

Thermal buckling and postbuckling of functionally graded carbon nanotube-reinforced composite (FG-CNTRC) beams are investigated in this paper based on Timoshenko beam theory within the framework of von Kármán geometric nonlinearity. The material properties of FG-CNTRCs are assumed to be temperature-dependent and vary in the beam thickness direction. The governing equations are derived by employing Hamilton’s principle then discretized by using differential quadrature (DQ) method. An iterative scheme is used to obtain the critical buckling temperature and nonlinear thermal postbuckling equilibrium path of the FG-CNTRC beam. Numerical results are presented for FG-CNTRC beams hinged or clamped at both ends, with particular focuses on the effects of the volume fraction of carbon nanotubes (CNTs), slenderness ratio, and end supports on the thermal buckling and postbuckling characteristics.

Sign in / Sign up

Export Citation Format

Share Document