scholarly journals First-Principles Study of the Reaction between Fluorinated Graphene and Ethylenediamine

Molecules ◽  
2019 ◽  
Vol 24 (2) ◽  
pp. 284
Author(s):  
Jin Tian ◽  
Yuhong Chen ◽  
Jing Wang ◽  
Tingting Liu ◽  
Meiling Zhang ◽  
...  
Keyword(s):  
Energy Barrier ◽  
Density Functional ◽  
Population Analysis ◽  
Reaction Process ◽  
Main Reaction ◽  
Mulliken Charge ◽  
Reaction Energy ◽  
Functional Theory ◽  
Fluorinated Graphene ◽  
Trans Structure

The reaction process between gauche- and trans-structure ethylenediamine (EDA) and fluorinated graphene (CF) was studied based on density functional theory (DFT). Firstly, the reaction between the most stable gauche-structure EDA and CF was discussed. Some of the reaction results were verified in experiment, but the overall reaction energy barrier was higher. Then, the reaction between the trans-structured EDA and CF was simulated, which concluded that CF is reduced in the main reaction channel and HF is generated at the same time. In this reaction process, the reaction energy barrier is as low as 0.81 eV, which indicates that the reaction may occur spontaneously under natural conditions The Mulliken charge population analysis and the calculation of bond energy prove that the NH bond is more stable than CH and that the H atoms in the CH2 of trans-structure EDA more easily react with CF.

scholarly journals Density Functional Theory Study on the Adsorption Mechanism of Sulphide Gas Molecules on α-Fe2O3(001) Surface

Inorganics ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 80
Author(s):  
Li Zhou ◽  
Huadong Zhu ◽  
Wen Zeng
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Molecular Form ◽  
Population Analysis ◽  
Chemical Properties ◽  
Vacancy Defect ◽  
Mulliken Charge ◽  
Functional Theory ◽  
Differential Density ◽  
Gas Molecules

Sulphide gas is an impurity that affects the quality of natural gas, which needs reasonable storage and transportation. In this work, we investigated the adsorption structure and electronic behavior of hydrogen sulfide (H2S), carbonyl sulfur (COS), and methyl mercaptan (CH3SH) on sulphide gas molecules on pure and vacant α-Fe2O3(001) surfaces by density functional theory with geometrical relaxations. The results show that H2S and CH3SH are mainly adsorbed in the form of molecules on the pure Fe2O3(001) surface. On the vacant α-Fe2O3(001) surface, they can be adsorbed on Fe atoms in molecular form and by dissociation. The absolute value of the adsorption energy of H2S and CH3SH on the vacancy defect α-Fe2O3 surface is larger, and the density of states show that the electron orbital hybridization is more significant, and the adsorption is stronger. The charge differential density and Mulliken charge population analysis show that the charge is rearranged and chemical bonds are formed. The affinity of H2S to the vacancy α-Fe2O3(001) surface is slightly higher than that of CH3SH, while COS molecules basically do not adsorb on the α-Fe2O3(001) surface, which may be related to the stable chemical properties of the molecules themselves.

COMPUTATIONAL STUDIES OF THE AMMONOLYSIS FOR N-METHYL β-SULTAM

2005 ◽  
Vol 04 (02) ◽  
pp. 383-395
Author(s):  
MAOXIA HE ◽  
DACHENG FENG ◽  
JU XIE ◽  
ZHENGTING CAI
Keyword(s):  
Energy Barrier ◽  
Density Functional ◽  
Dft Method ◽  
Computational Studies ◽  
Reaction Energy ◽  
Positive Role ◽  
Functional Theory ◽  
Concerted Mechanism ◽  
Alcoholysis Reaction ◽  
Reaction Processes

As a first step toward the understanding of the aminolysis reaction of β-sultam compounds, the ammonolysis and the effect of a second ammonia on the ammonolysis reactions of N -methyl β-sultam have been studied using Density Functional Theory (DFT) method at the B3LYP/6-31G* level. The exploration of the reaction processes proposed two different mechanisms: concerted and stepwise mechanisms. There is one pathway in concerted mechanism and two pathways in stepwise mechanisms: pathways a and b. The calculations of reaction energy barriers show that the nonconcerted route is the more favored one. Solvent effects were assessed by the PCM method. The results show that the pathway a in channel II is the most favorable in both cases. The presence of solvent disfavors the reaction, and the participation of ammonia in the ammonolysis reaction plays a positive role and reduces the active energy greatly. All transition states in the assisted ammonolysis are 45–65 kJ/mol lower than those for the non-assisted reaction. The results also show that the ammonolysis reaction have a higher energy barrier than the alcoholysis reaction. This low reactivity of amines is also observed in the reactions of N -benzoyl β-sultam and p-nitrophenyl toluene-p-sulfonate where there is a distinct preference towards oxygen nucleophiles.

Reaction Mechanism of Atomic Layer Deposition of Al on the Si (100) Surface: A Density Functional Theory Study

2014 ◽  
Vol 941-944 ◽  
pp. 1283-1287
Author(s):  
Mao Jin Dong ◽  
Ran Fang ◽  
Yu Qing Xiong ◽  
Duo Shu Wang ◽  
Ji Zhou Wang ◽  
...  
Keyword(s):  
Density Functional ◽  
Activation Barrier ◽  
Exothermic Reaction ◽  
Atomic Layer ◽  
Reaction Process ◽  
Chemical Adsorption ◽  
Reaction Energy ◽  
Functional Theory ◽  
Barrier Energy ◽  
Layer Deposition

Using H2 and Al (CH3)3(TMA) as precursor, we investigated the atomic layer deposition mechanism of the metal Al on Si (100) surface by density functional theory. The reaction process comprises two half-reaction depositions: TMA "half-reaction" includes I and II on the H blunt reaction surface; H2 "half-reaction" includes the subsequent reaction Ⅲ and Ⅳ. In the TMA half reaction process, trimethyl aluminum first molecularly adsorbed in the active site of H*-Si9H12-H* to form a stable complex in the form of chemical adsorption state. Potential curves show that at 298 K, adsorption energy is -2.26kJ/mol, with respect to the chemical adsorption state, the activation barrier energy is 124.72kJ/mol, and finally the whole exothermic reaction energy is 41.4kJ/mol. After H2 half reaction, the bond length between Al-Si can be considered equal; two Al-C bonds become relatively stable molecular structure. The adsorption energy is -0.10kJ/mol at 298 K, and the activation barrier energy 189.15kJ/mol. The results show that two half-reaction process mechanism is similar, TMA endothermic reaction needs more energy to be carried out under heating conditions ; endothermic and exothermic reaction energy is basic balance, the activation energy is large, so the reaction is the best using ionized gas to be carried out.

DFT study on the hydrolysis of metsulfuron-methyl: A sulfonylurea herbicide

2018 ◽  
Vol 17 (08) ◽  
pp. 1850050 ◽  
Author(s):  
Qiuhan Luo ◽  
Gang Li ◽  
Junping Xiao ◽  
Chunhui Yin ◽  
Yahui He ◽  
...  
Keyword(s):  
Free Energy ◽  
Water Molecule ◽  
Carbonyl Group ◽  
Energy Barrier ◽  
Density Functional ◽  
Free Energy Barrier ◽  
Functional Theory ◽  
Metsulfuron Methyl ◽  
Catalytic Role ◽  
Hydrolysis Of

Sulfonylureas are an important group of herbicides widely used for a range of weeds and grasses control particularly in cereals. However, some of them tend to persist for years in environments. Hydrolysis is the primary pathway for their degradation. To understand the hydrolysis behavior of sulfonylurea herbicides, the hydrolysis mechanism of metsulfuron-methyl, a typical sulfonylurea, was investigated using density functional theory (DFT) at the B3LYP/6-31[Formula: see text]G(d,p) level. The hydrolysis of metsulfuron-methyl resembles nucleophilic substitution by a water molecule attacking the carbonyl group from aryl side (pathway a) or from heterocycle side (pathway b). In the direct hydrolysis, the carbonyl group is directly attacked by one water molecule to form benzene sulfonamide or heterocyclic amine; the free energy barrier is about 52–58[Formula: see text]kcal[Formula: see text]mol[Formula: see text]. In the autocatalytic hydrolysis, with the second water molecule acting as a catalyst, the free energy barrier, which is about 43–45[Formula: see text]kcal[Formula: see text]mol[Formula: see text], is remarkably reduced by about 11[Formula: see text]kcal[Formula: see text]mol[Formula: see text]. It is obvious that water molecules play a significant catalytic role during the hydrolysis of sulfonylureas.

scholarly journals Exo⇔Endo Isomerism, MEP/DFT, XRD/HSA-Interactions of 2,5-Dimethoxybenzaldehyde: Thermal, 1BNA-Docking, Optical, and TD-DFT Studies

Molecules ◽  
2020 ◽  
Vol 25 (24) ◽  
pp. 5970
Author(s):  
Nabil Al-Zaqri ◽  
Mohammed Suleiman ◽  
Anas Al-Ali ◽  
Khaled Alkanad ◽  
Karthik Kumara ◽  
...  
Keyword(s):  
Density Functional ◽  
Energy Gap ◽  
Structural Parameters ◽  
Population Analysis ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
Optical Energy Gap ◽  
Functional Theory ◽  
Reactivity Descriptors ◽  
Td Dft

The exo⇔endo isomerization of 2,5-dimethoxybenzaldehyde was theoretically studied by density functional theory (DFT) to examine its favored conformers via sp2–sp2 single rotation. Both isomers were docked against 1BNA DNA to elucidate their binding ability, and the DFT-computed structural parameters results were matched with the X-ray diffraction (XRD) crystallographic parameters. XRD analysis showed that the exo-isomer was structurally favored and was also considered as the kinetically preferred isomer, while several hydrogen-bonding interactions detected in the crystal lattice by XRD were in good agreement with the Hirshfeld surface analysis calculations. The molecular electrostatic potential, Mulliken and natural population analysis charges, frontier molecular orbitals (HOMO/LUMO), and global reactivity descriptors quantum parameters were also determined at the B3LYP/6-311G(d,p) level of theory. The computed electronic calculations, i.e., TD-SCF/DFT, B3LYP-IR, NMR-DB, and GIAO-NMR, were compared to the experimental UV–Vis., optical energy gap, FTIR, and 1H-NMR, respectively. The thermal behavior of 2,5-dimethoxybenzaldehyde was also evaluated in an open atmosphere by a thermogravimetric–derivative thermogravimetric analysis, indicating its stability up to 95 °C.

A Density Functional Theory Study on the Ring-Opening Polymerization of D-Lactide Catalyzed by a Bifunctional-Thiourea Catalyst

2009 ◽  
Vol 62 (2) ◽  
pp. 157 ◽  
Author(s):  
Rong-Xiu Zhu ◽  
Ruo-Xi Wang ◽  
Dong-Ju Zhang ◽  
Cheng-Bu Liu
Keyword(s):  
Density Functional Theory ◽  
Ring Opening ◽  
Density Functional ◽  
Population Analysis ◽  
Density Functional Theory Calculations ◽  
Ring Opening Polymerization ◽  
Acyl Transfer ◽  
Frontier Molecular Orbital ◽  
Functional Theory ◽  
Elimination Pathway

The thiourea-catalyzed methanolysis of d-lactide, a model system for the initiation and propagation of the organocatalyzed ring-opening polymerization (ROP) of lactide, has been studied by performing density functional theory calculations. Both the catalyzed and uncatalyzed reactions are explored along two possible pathways: one involves the stepwise addition–elimination pathway and the other is related to the concerted pathway. It is found that the reaction without the presence of the catalyst is difficult because the barrier involved is as high as 176 kJ mol–1. With the aid of a thiourea catalyst, the barrier is reduced to 88 kJ mol–1 with a preference for the stepwise addition–elimination mechanism over the concerted one. The role of the catalyst has been rationalized by analyzing the frontier molecular orbital interactions between the catalyst and substrates and by performing natural population analysis. Finally, another mechanism involving acyl transfer is discussed for the thiourea-catalyzed ROP.

First principle simulation on oxidation mechanism of diethyl ether by nitrogen dioxide

2015 ◽  
Vol 14 (03) ◽  
pp. 1550020 ◽  
Author(s):  
Yuan Yuan ◽  
Wei Hu ◽  
Xuhui Chi ◽  
Cuihua Li ◽  
Dayong Gui ◽  
...  
Keyword(s):  
Diethyl Ether ◽  
Energy Barrier ◽  
Density Functional ◽  
Oxidation Process ◽  
Oxidation Mechanism ◽  
High Energy ◽  
First Principle ◽  
Functional Theory ◽  
The Third ◽  
High Energy Barrier

The oxidation mechanism of diethyl ethers by NO2was carried out using density functional theory (DFT) at the B3LYP/6-31+G (d, p) level. The oxidation process of ether follows four steps. First, the diethyl ether reacts with NO2to produce HNO2and diethyl ether radical with an energy barrier of 20.62 kcal ⋅ mol-1. Then, the diethyl ether radical formed in the first step directly combines with NO2to form CH3CH ( ONO ) OCH2CH3. In the third step, the CH3CH ( ONO ) OCH2CH3was further decomposed into the CH3CH2ONO and CH3CHO with a moderately high energy barrier of 32.87 kcal ⋅ mol-1. Finally, the CH3CH2ONO continues to react with NO2to yield CH3CHO , HNO2and NO with an energy barrier of 28.13 kcal ⋅ mol-1. The calculated oxidation mechanism agrees well with Nishiguchi and Okamoto's experiment and proposal.

A DFT study on the mechanism of reaction between 2, 4-diisocyanatotolune and cellulose

2016 ◽  
Vol 15 (02) ◽  
pp. 1650012 ◽  
Author(s):  
Jiping Cao ◽  
Yali Liu ◽  
Aijuan Shi ◽  
Yuan Yuan ◽  
Mingliang Wang
Keyword(s):  
Reaction Mechanisms ◽  
Energy Barrier ◽  
Density Functional ◽  
Membered Ring ◽  
Functional Theory ◽  
Mechanism Of Reaction ◽  
The Density Functional Theory ◽  
Good Accordance ◽  
Experimental Activation Energy ◽  
Ring Transition State

The reaction mechanisms between 2, 4-Diisocyanatotolune (2, 4-TDI) and cellulose have been investigated using the density functional theory at the B3LYP/6-31[Formula: see text]G (d, p) level. The calculations show that the direct addition of 2, 4-TDI and cellulose possesses an unrealistically high barrier of 32–34[Formula: see text]kcal[Formula: see text]mol[Formula: see text]. With a neighboring [Formula: see text]-d-glucose serving as a proton transporter by forming a flexible six-membered ring transition state, the energy barrier of the reaction is significantly reduced to 16–18 kcal[Formula: see text]mol[Formula: see text], which is in a good accordance with the experimental activation energy of 13.9–16.7[Formula: see text]kcal[Formula: see text]mol[Formula: see text]. It is indicated that the reaction between 2, 4-TDI and cellulose is auto-catalyzed with a neighboring [Formula: see text]-d-glucose acting as a reactive catalyst.

scholarly journals Novel Insights into the Hydroxylation Behaviors of α-Quartz (101) Surface and its Effects on the Adsorption of Sodium Oleate

Minerals ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 450 ◽  
Author(s):  
Zhang ◽  
Xu ◽  
Hu ◽  
He ◽  
Tian ◽  
...  
Keyword(s):  
Sodium Oleate ◽  
Density Functional ◽  
Population Analysis ◽  
Water Molecules ◽  
Mulliken Population ◽  
Flotation Reagents ◽  
Functional Theory ◽  
Rigorous Study ◽  
Adsorption Energies ◽  
Hydroxylated Surface

A scientific and rigorous study on the adsorption behavior and molecular mechanism of collector sodium oleate (NaOL) on a Ca2+-activated hydroxylated α-quartz surface was performed through experiments and density functional theory (DFT) simulations. The rarely reported hydroxylation behaviors of water molecules on the α-quartz (101) surface were first innovatively and systematically studied by DFT calculations. Both experimental and computational results consistently demonstrated that the adsorbed calcium species onto the hydroxylated structure can significantly enhance the adsorption of oleate ions, resulting in a higher quartz recovery. The calculated adsorption energies confirmed that the adsorbed hydrated Ca2+ in the form of Ca(H2O)3(OH)+ can greatly promote the adsorption of OL− on hydroxylated quartz (101). In addition, Mulliken population analysis together with electron density difference analysis intuitively illustrated the process of electron transfer and the Ca-bridge phenomenon between the hydroxylated surface and OL− ions. This work may offer new insights into the interaction mechanisms existing among oxidized minerals, aqueous medium, and flotation reagents.

scholarly journals Theoretical Study on Influence of Cobalt Oxides Valence State Change for C6H5COOH Pyrolysis

Catalysts ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 197
Author(s):  
Si-Mei Fu ◽  
Yue Zhao ◽  
Jiang-Tao Liu ◽  
Wen-Sheng Liang ◽  
Gang-Sen Li ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Valence State ◽  
Energy Barrier ◽  
Density Functional ◽  
Model Compound ◽  
Theoretical Study ◽  
Cobalt Oxides ◽  
State Change ◽  
Pyrolysis Process ◽  
Functional Theory

Benzoic acid (C6H5COOH) is selected as coal-based model compound with Co compounds (Co3O4, CoO and Co) as the catalysts, and the influence of the valence state change of the catalyst for pyrolysis process is investigated using density functional theory (DFT). DFT results shows that the highest energy barrier of C6H5COOH pyrolysis is in the following order: Ea(CoO) <Ea(Co3O4) <Ea(no catalyst) <Ea(Co). In general, Co3O4 catalyst accelerates C6H5COOH pyrolysis. Then, the catalytic activity further increases when Co3O4 is reduced to CoO. Finally, Co shows no activity for C6H5COOH pyrolysis due to the reduction of CoO to metallic Co.

Sign in / Sign up

Export Citation Format

Share Document