scholarly journals A Comparative Study of Molybdenum Carbonyl and Oxomolybdenum Derivatives Bearing 1,2,3-Triazole or 1,2,4-Triazoles in Catalytic Olefin Epoxidation

Molecules ◽  
2018 ◽  
Vol 24 (1) ◽  
pp. 105
Author(s):  
Lucie S. Nogueira ◽  
Patrícia Neves ◽  
Ana C. Gomes ◽  
Tatiana A. Amarante ◽  
Filipe A. Almeida Paz ◽  
...  
Keyword(s):  
Hybrid Materials ◽  
Catalytic Performance ◽  
Carbonyl Complexes ◽  
One Dimensional ◽  
Tert Butyl Hydroperoxide ◽  
Molybdenum Carbonyl ◽  
Polymeric Structures ◽  
Insight Into ◽  
Dinuclear Structure

The molybdenum(0)-carbonyl-triazole complexes [Mo(CO)3(L)3] [L = 1,2,3-triazole (1,2,3-trz) or 1,2,4-triazole (1,2,4-trz)] have been prepared and examined as precursors to molybdenum(VI) oxide catalysts for the epoxidation of cis-cyclooctene. Reaction of the carbonyl complexes with the oxidant tert-butyl hydroperoxide (TBHP) (either separately or in situ) gives oxomolybdenum(VI) hybrid materials that are proposed to possess one-dimensional polymeric structures in which adjacent oxo-bridged dioxomolybdenum(VI) moieties are further linked by bidentate bridging triazole (trz) ligands. A pronounced ligand influence on catalytic performance was found and the best result (quantitative epoxide yield within 1 h at 70 °C) was obtained with the 1,2,3-triazole oxomolybdenum(VI) hybrid. Both molybdenum oxide-triazole compounds displayed superior catalytic performance in comparison with the known hybrid materials [MoO3(trz)0.5], which have different structures based on organic-inorganic perovskite-like layers. With aqueous H2O2 as the oxidant instead of TBHP, all compounds were completely soluble and active. A pronounced ligand influence on catalytic performance was only found for the hybrids [MoO3(trz)0.5], and only the 1,2,4-trz compound displayed reaction-induced self-precipitation behavior. An insight into the type of solution species that may be involved in the catalytic processes with these compounds was obtained by separately treating [MoO3(1,2,4-trz)0.5] with excess H2O2, which led to the crystallization of the complex (NH4)1.8(H3O)0.2[Mo2O2(μ2-O)(O2)4(1,2,4-trz)]·H2O. The single-crystal X-ray investigation of this complex reveals an oxo-bridged dinuclear structure with oxodiperoxo groups being further linked by a single triazole bridge.

Structure and function of neural networks in the retina

1988 ◽  
Vol 46 ◽  
pp. 26-27
Author(s):  
Peter Sterling
Keyword(s):  
Ganglion Cells ◽  
Three Dimensional ◽  
Structure And Function ◽  
Synaptic Connections ◽  
Visual Axis ◽  
One Dimensional ◽  
Cat Retina ◽  
Ultrathin Sections ◽  
And Function ◽  
Insight Into

The synaptic connections in cat retina that link photoreceptors to ganglion cells have been analyzed quantitatively. Our approach has been to prepare serial, ultrathin sections and photograph en montage at low magnification (˜2000X) in the electron microscope. Six series, 100-300 sections long, have been prepared over the last decade. They derive from different cats but always from the same region of retina, about one degree from the center of the visual axis. The material has been analyzed by reconstructing adjacent neurons in each array and then identifying systematically the synaptic connections between arrays. Most reconstructions were done manually by tracing the outlines of processes in successive sections onto acetate sheets aligned on a cartoonist's jig. The tracings were then digitized, stacked by computer, and printed with the hidden lines removed. The results have provided rather than the usual one-dimensional account of pathways, a three-dimensional account of circuits. From this has emerged insight into the functional architecture.

scholarly journals The influence of chemical parameters on the in-situ metal carbonyl complex formation studied with the fast on-line reaction apparatus (FORA)

2021 ◽  
Vol 109 (4) ◽  
pp. 243-260 ◽  
Author(s):  
Yves Wittwer ◽  
Robert Eichler ◽  
Dominik Herrmann ◽  
Andreas Türler
Keyword(s):  
Metal Carbonyl ◽  
Ambient Air ◽  
Single Atom ◽  
Carbonyl Complex ◽  
Carbonyl Complexes ◽  
On Line ◽  
Carrier Gases ◽  
And Performance ◽  
Atom Chemistry

Abstract A new setup named Fast On-line Reaction Apparatus (FORA) is presented which allows for the efficient investigation and optimization of metal carbonyl complex (MCC) formation reactions under various reaction conditions. The setup contains a 252Cf-source producing short-lived Mo, Tc, Ru and Rh isotopes at a rate of a few atoms per second by its 3% spontaneous fission decay branch. Those atoms are transformed within FORA in-situ into volatile metal carbonyl complexes (MCCs) by using CO-containing carrier gases. Here, the design, operation and performance of FORA is discussed, revealing it as a suitable setup for performing single-atom chemistry studies. The influence of various gas-additives, such as CO2, CH4, H2, Ar, O2, H2O and ambient air, on the formation and transport of MCCs was investigated. O2, H2O and air were found to harm the formation and transport of MCCs in FORA, with H2O being the most severe. An exception is Tc, for which about 130 ppmv of H2O caused an increased production and transport of volatile compounds. The other gas-additives were not influencing the formation and transport efficiency of MCCs. Using an older setup called Miss Piggy based on a similar working principle as FORA, it was additionally investigated if gas-additives are mostly affecting the formation or only the transport stability of MCCs. It was found that mostly formation is impacted, as MCCs appear to be much less sensitive to reacting with gas-additives in comparison to the bare Mo, Tc, Ru and Rh atoms.

scholarly journals Insight into Active Centers and Anti-Coke Behavior of Niobium-Containing SBA-15 for Glycerol Dehydration

Catalysts ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 488
Author(s):  
Katarzyna Stawicka ◽  
Maciej Trejda ◽  
Maria Ziolek
Keyword(s):  
Coke Formation ◽  
Catalytic Performance ◽  
Acid Sites ◽  
Silica Matrix ◽  
High Concentration ◽  
Active Centers ◽  
Acidic Sites ◽  
Glycerol Dehydration ◽  
Adsorption Desorption ◽  
Insight Into

Niobium containing SBA-15 was prepared by two methods: impregnation with different amounts of ammonium niobate(V) oxalate (Nb-15/SBA-15 and Nb-25/SBA-15 containing 15 wt.% and 25 wt.% of Nb, respectively) and mixing of mesoporous silica with Nb2O5 followed by heating at 500 °C (Nb2O5/SBA-15). The use of these two procedures allowed obtaining materials with different textural/surface properties determined by N2 adsorption/desorption isotherms, XRD, UV-Vis, pyridine, and NO adsorption combined with FTIR spectroscopy. Nb2O5/SBA-15 contained exclusively crystalline Nb2O5 on the SBA-15 surface, whereas the materials prepared by impregnation had both metal oxide and niobium incorporated into the silica matrix. The niobium species localized in silica framework generated Brønsted (BAS) and Lewis (LAS) acid sites. The inclusion of niobium into SBA-15 skeleton was crucial for the achievement of high catalytic performance. The strongest BAS were on Nb-25/SBA-15, whereas the highest concentration of BAS and LAS was on Nb-15/SBA-15 surface. Nb2O5/SBA-15 material possessed only weak LAS and BAS. The presence of the strongest BAS (Nb-25/SBA-15) resulted in the highest dehydration activity, whereas a high concentration of BAS was unfavorable. Silylation of niobium catalysts prepared by impregnation reduced the number of acidic sites and significantly increased acrolein yield and selectivity (from ca. 43% selectivity for Nb-25/SBA-15 to ca. 61% for silylated sample). This was accompanied by a considerable decrease in coke formation (from 47% selectivity for Nb-25/SBA-15 to 27% for silylated material).

scholarly journals Development of Fragility Curves for Piping and Slope Stability of River Levees

Water ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 738
Author(s):  
Nicola Rossi ◽  
Mario Bačić ◽  
Meho Saša Kovačević ◽  
Lovorka Librić
Keyword(s):  
Slope Stability ◽  
Fragility Curves ◽  
Safety Margin ◽  
Water Levels ◽  
Flood Event ◽  
Soil Parameters ◽  
Design Code ◽  
A Site ◽  
Insight Into

The design code Eurocode 7 relies on semi-probabilistic calculation procedures, through utilization of the soil parameters obtained by in situ and laboratory tests, or by the means of transformation models. To reach a prescribed safety margin, the inherent soil parameter variability is accounted for through the application of partial factors to either soil parameters directly or to the resistance. However, considering several sources of geotechnical uncertainty, including the inherent soil variability, measurement error and transformation uncertainty, full probabilistic analyses should be implemented to directly consider the site-specific variability. This paper presents the procedure of developing fragility curves for levee slope stability and piping as failure mechanisms that lead to larger breaches, where a direct influence of the flood event intensity on the probability of failure is calculated. A range of fragility curve sets is presented, considering the variability of levee material properties and varying durations of the flood event, thus providing crucial insight into the vulnerability of the levee exposed to rising water levels. The procedure is applied to the River Drava levee, a site which has shown a continuous trend of increased water levels in recent years.

1,3-Butadiene production from aqueous ethanol over ZnO/MgO-SiO2 catalysts: Insight into H2O effect on catalytic performance

2021 ◽  
Vol 616 ◽  
pp. 118081
Author(s):  
Pavlo I. Kyriienko ◽  
Olga V. Larina ◽  
Dmytro Yu. Balakin ◽  
Anatolii O. Stetsuk ◽  
Yurii M. Nychiporuk ◽  
...  
Keyword(s):  
Aqueous Ethanol ◽  
Catalytic Performance ◽  
Insight Into

Insight into the enhanced photocatalytic properties of AgBr/Ag4P2O7 composites synthesized via in situ ion exchange reaction

2021 ◽  
Vol 9 (1) ◽  
pp. 104889
Author(s):  
Wyllamanney da S. Pereira ◽  
Fabrício B. Destro ◽  
Cipriano B. Gozzo ◽  
Edson R. Leite ◽  
Júlio C. Sczancoski
Keyword(s):  
Ion Exchange ◽  
Exchange Reaction ◽  
Photocatalytic Properties ◽  
Ion Exchange Reaction ◽  
Insight Into

scholarly journals In situ synthesis of methane using Ag–GDC composite electrodes in a tubular solid oxide electrolytic cell: new insight into the role of oxide ion removal

2021 ◽  
Vol 5 (7) ◽  
pp. 2055-2064
Author(s):  
Saheli Biswas ◽  
Aniruddha P. Kulkarni ◽  
Daniel Fini ◽  
Sarbjit Giddey ◽  
Sankar Bhattacharya
Keyword(s):  
Electrolytic Cell ◽  
Composite Electrodes ◽  
Ion Removal ◽  
Single Temperature ◽  
Methanation Catalyst ◽  
Oxide Ion ◽  
Insight Into ◽  
Electrochemical Phenomenon

In situ synthesis of methane in a single-temperature zone SOEC in the absence of any methanation catalyst is a completely electrochemical phenomenon governed by the thermodynamic equilibrium of various reactions.

Sign in / Sign up

Export Citation Format

Share Document