scholarly journals Sol-Gel Immobilisation of Lipases: Towards Active and Stable Biocatalysts for the Esterification of Valeric Acid

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2283 ◽  
Author(s):  
Soledad Cebrián-García ◽  
Alina Balu ◽  
Araceli García ◽  
Rafael Luque

Alkyl esters are high added value products useful in a wide range of industrial sectors. A methodology based on a simple sol-gel approach (biosilicification) is herein proposed to encapsulate enzymes in order to design highly active and stable biocatalysts. Their performance was assessed through the optimization of valeric acid esterification evaluating the effect of different parameters (biocatalyst load, presence of water, reaction temperature and stirring rate) in different alcoholic media, and comparing two different methodologies: conventional heating and microwave irradiation. Ethyl valerate yields were in the 80–85% range under optimum conditions (15 min, 12% m/v biocatalyst, molar ratio 1:2 of valeric acid to alcohol). Comparatively, the biocatalysts were slightly deactivated under microwave irradiation due to enzyme denaturalisation. Biocatalyst reuse was attempted to prove that good reusability of these sol-gel immobilised enzymes could be achieved under conventional heating.

2020 ◽  
Vol 15 (1) ◽  
pp. 137-150
Author(s):  
Darshana Tushar Bhatti ◽  
Sachin Prakashbhai Parikh ◽  
◽  

A wide range of active pharmaceutical ingredients (API) is found in various water streams. These synthetic non-biodegradable organics create trouble in conventional wastewater treatment due to toxicity. There is a strong need to develop substitute technology such as visible light driven photocatalysis with a reusable photocatalyst to completely oxidize these substances into carbon dioxide and water. Sol-gel method was used for synthesis of Fe doped TiO2 and Ag-Fe codoped TiO2 nanoparticles with 0.5 wt% Fe and Ti/Ag molar ratio 30 (Ag-Fe CT 30). The morphology and structure of nanoparticles were studied using various analytical techniques. Ag-Fe CT 30 photocatalyst has exhibited excellent photocatalytic activity compared to commercial TiO2, undoped TiO2 and Fe doped TiO2 nanophotocatalysts under solar and UV irradiation for removal of an antifungal drug intermediate, Difloro triazole acetophenone (DFTA) from water. COD reduction efficiency was highest with Ag-Fe CT 30 under solar and UV irradiation proves the potential of Ag-Fe CT 30 photocatalyst to absorb both UV as well as visible radiations. Ag-Fe CT 30 has shown good stability for 4 runs without much decline in the efficacy. This study provides insights on the solar application of a reusable Ag-Fe CT 30 photocatalyst for the treatment of high strength COD wastewater. Kinetics of COD reduction by photocatalysis has been determined.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Nur Atiqah Mohamad Aziz ◽  
Robiah Yunus ◽  
Hamidah Abd Hamid ◽  
Alsultan Abdul Kareem Ghassan ◽  
Rozita Omar ◽  
...  

AbstractMicrowave-assisted synthesis is known to accelerate the transesterification process and address the issues associated with the conventional thermal process, such as the processing time and the energy input requirement. Herein, the effect of microwave irradiation on the transesterification of palm oil methyl ester (PME) with trimethylolpropane (TMP) was evaluated. The reaction system was investigated through five process parameters, which were reaction temperature, catalyst, time, molar ratio of TMP to PME and vacuum pressure. The yield of TMP triester at 66.9 wt.% and undesirable fatty soap at 17.4% were obtained at 130 °C, 10 mbar, sodium methoxide solution at 0.6 wt.%, 10 min reaction time and molar ratio of TMP to PME at 1:4. The transesterification of palm oil-based methyl ester to trimethylolpropane ester was 3.1 folds faster in the presence of microwave irradiation. The total energy requirement was markedly reduced as compared to the conventional heating method. The findings indicate that microwave-assisted transesterification could probably be an answer to the quest for a cheaper biodegradable biolubricant.


2010 ◽  
Vol 644 ◽  
pp. 39-42 ◽  
Author(s):  
E.M. Múzquiz-Ramos ◽  
Dora A. Cortés-Hernández ◽  
O.A. Herrera-Romero ◽  
José C. Escobedo-Bocardo

In this work, the synthesis of CoFe2O4 via sol-gel auto-combustion method, using iron nitrate, cobalt nitrate and citric acid, with subsequent heat treatment in air was studied. The effects of the molar ratio of the metal nitrates to citric acid and the heat treatment temperatures on the magnetic properties have been investigated. The X-ray diffraction patterns showed peaks consistent with cubic spinel-type structure. The average crystallite sizes were determined from the (311) peak of the diffraction pattern using Scherrer equation. Particle sizes in the range of 18-44 nm were obtained. The crystallite size increases with annealing temperature. Magnetic properties, such as saturation magnetization (Ms), remanent magnetization (Mr) and coercivity field (Hc) were measured at room temperature using a vibrating sample magnetometer. Saturation magnetization was found to increase with particle size, whereas coercivity was found to reduce exponentially as the particle size was increased, apart from the Hc of the sample treated at 300 °C. The present work shows that magnetic properties vary over a wide range by changing the synthesis conditions.


2021 ◽  
Author(s):  
Bishwajit Changmai ◽  
Kalyani Rajkumari ◽  
diparjun das ◽  
Samuel Lalthazuala Rokhum

Synthesis and application of acid-functionalized mesoporous polymer catalyst for the synthesis of 3,4-Dihydropyrimidin-2(1H)-ones via Biginelli condensation reaction under microwave irradiation is investigated. Several analytical techniques such as FT-IR, BET, TEM, SEM and EDX were employed to characterize the synthesized polymeric catalyst. High acidity (1.15 mmol g-1 ), high surface area (90.44 m2 g -1 ) and mesoporous nature of the catalyst effectively promoted the synthesis of 3,4-Dihydropyrimidin-2(1H)-ones. Microwave irradiation shows higher yield (89-98 %) as compared to conventional heating (15-25 % yield) under our optimized reaction conditions such as 1:1:1.2 molar ratio of aldehyde/ethylacetoacetate/urea, catalyst loading of 6 wt.% (with respect to aldehyde), the temperature of 80 °C and microwave power of 50 W. The synthesized Biginelli products were fully characterized by 1H and 13C NMR. The reusability of the catalyst was investigated up to 5 successive cycles and it showed great stability towards the synthesis of 3,4-Dihydropyrimidin-2(1H)-ones without any significant depreciation in yields.


2005 ◽  
Vol 492-493 ◽  
pp. 743-748 ◽  
Author(s):  
Hyung Mi Lim ◽  
Mi Ra Kang ◽  
Sang Chun Lee ◽  
Seung Ho Lee ◽  
Kwang Jin Kim

Layered double hydroxide(LDH) was synthesized from the mixture of magnesium hydroxide and aluminum hydroxide with microwave irradiation. It has been compared with that of conventional heating method in the respect of crystallization time, structure, morphology, particle size, and its anion exchange capacity. The microwave speeded up the crystallization rate of Mg-Al- LDH so that the XRD patterns of LDH was observed from the sample after microwave hydrothermal treatment, while the crystal phase was hardly observed from that prepared by conventional hydrothermal method before drying process. Mg-Al-LDH prepared with microwave irradiation seemed to have slightly higher Mg/Al molar ratio even with the same compositions of starting materials and the lower anion exchange capacity after 1 day exposure in 0.1N NaCl solution compared to the conventionally prepared one.


Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2167
Author(s):  
Hoang Chinh Nguyen ◽  
Fu-Ming Wang ◽  
Kim Khue Dinh ◽  
Thanh Truc Pham ◽  
Horng-Yi Juan ◽  
...  

This study developed a microwave-mediated noncatalytic esterification of oleic acid for producing ethyl biodiesel. The microwave irradiation process outperformed conventional heating methods for the reaction. A highest reaction conversion, 97.62%, was achieved by performing esterification with microwave irradiation at a microwave power of 150 W, 2:1 ethanol:oleic acid molar ratio, reaction time of 6 h, and temperature of 473 K. A second-order reaction model (R2 of up to 0.997) was established to describe esterification. The reaction rate constants were promoted with increasing microwave power and temperature. A strong linear relation of microwave power to pre-exponential factors was also established, and microwave power greatly influenced the reaction due to nonthermal effects. This study suggested that microwave-assisted noncatalytic esterification is an efficient approach for biodiesel synthesis.


2021 ◽  
Vol 21 (4) ◽  
pp. 218-226
Author(s):  
L. B. Okhlopkova ◽  
K. A. Kravchenko ◽  
M. A. Kerzhentsev ◽  
Z. R. Ismagilov

The purpose of this work is to present our latest achievements in the design, synthesis and development of a new catalytic microreactor for the processes of selective and continuous synthesis of substances with added value that are used in fine organic synthesis and pharmaceutical industries. In this advanced device, metal nanoparticles are embedded in mesoporous materials, which are deposited in the form of highly active and selective catalytic films on the walls of capillary microchannels with diameters of 220 and 530 μm. In such microreactor systems, there is no subsequent separation of the catalyst, which facilitates continuous operation. Potentially the most stable coatings are crystalline or amorphous titanium dioxide based metal oxides synthesized by the sol-gel method and containing embedded catalytically active polymetallic nanoparticles. The catalytic properties and operational stability of capillary microreactors were investigated at atmospheric pressure and compared with conventional industrial batch reactors. The developed Pd50Zn50 /TiO2 coating showed a higher activity (1.5 gMBE·gPd–1·s–1) and selectivity (96.7 %) in comparison with the coatings described earlier in the literature and with the industrial Lindlar catalyst, and retained high catalytic performance after 88 hours of reaction.


2021 ◽  
Author(s):  
Bishwajit Changmai ◽  
Kalyani Rajkumari ◽  
diparjun das ◽  
Samuel Lalthazuala Rokhum

Synthesis and application of acid-functionalized mesoporous polymer catalyst for the synthesis of 3,4-Dihydropyrimidin-2(1H)-ones via Biginelli condensation reaction under microwave irradiation is investigated. Several analytical techniques such as FT-IR, BET, TEM, SEM and EDX were employed to characterize the synthesized polymeric catalyst. High acidity (1.15 mmol g-1 ), high surface area (90.44 m2 g -1 ) and mesoporous nature of the catalyst effectively promoted the synthesis of 3,4-Dihydropyrimidin-2(1H)-ones. Microwave irradiation shows higher yield (89-98 %) as compared to conventional heating (15-25 % yield) under our optimized reaction conditions such as 1:1:1.2 molar ratio of aldehyde/ethylacetoacetate/urea, catalyst loading of 6 wt.% (with respect to aldehyde), the temperature of 80 °C and microwave power of 50 W. The synthesized Biginelli products were fully characterized by 1H and 13C NMR. The reusability of the catalyst was investigated up to 5 successive cycles and it showed great stability towards the synthesis of 3,4-Dihydropyrimidin-2(1H)-ones without any significant depreciation in yields.


2019 ◽  
Vol 16 (3) ◽  
pp. 194-201 ◽  
Author(s):  
Renu Bala ◽  
Vandana Devi ◽  
Pratibha Singh ◽  
Navjot Kaur ◽  
Pawandeep Kaur ◽  
...  

Background: Tetrahydroindazole, a member of the fused-pyrazole system, is a least studied class of heterocyclic compounds owing to its scarcity in nature. However, a large number of synthetically prepared tetrahydroindazoles are known to show a variety of biological activities such as interleukin- 2 inducible T-Cell kinase inhibitors, AMPA receptor positive allosteric modulators, antitumor, antituberculosis, anti-inflammatory and antimicrobial activities. Vilsmeier-Haack reaction is one of the most important chemical reactions used for formylation of electron rich arenes. Even though Vilsmeier- Haack reaction was studied on a wide variety of hydrazones derived from active methylene compounds, literature lacks the examples of the use of 4-substituted cyclohexanones as a substrate for the synthesis of 4,5,6,7-tetrahydroindazoles. The study of the reaction of Vilsmeier-Haack reagent with hydrazones derived from cyclic keto compounds having active methylene has been considered the interested topic of investigation. In the present study, ethyl cyclohexanone-4-carboxylate was treated with one equivalent of various hydrazines for two hours and the resulted hydrazones were further treated with an OPC-VH reagent (Vilsmeier-Haack reagent isolated from phthaloyl dichloride and N,Ndimethylformamide) afforded 4,5,6,7-tetrahydroindazoles in excellent yields. The synthesized compounds 4a-f and 5a-f were screened for their antioxidant activities using the DPPH radical scavenging assay. The target compounds were synthesized regioselectively using 4+1 approach in excellent yields. A number of experiments using both conventional heating as well as microwave irradiation methods were tried and on comparison, microwave irradiation method was found excellent in terms of easy work up, high chemical yields, shortened reaction times, clean and, no by-products formation. Some of the synthesized compounds showed significant antioxidant activity. The microwave assisted synthesis of 4,5,6,7-tetrahydroindazoles from ethyl cyclohexanone-4-carboxylate has been reported under mild conditions in excellent yield. Easy work up, high chemical yield, shortened reaction times, clean and no by-products formation are the major advantages of this protocol. These advantages may make this method useful for chemists who are interested in developing novel 4,5,6,7-tetrahydroindazole based drugs.


2018 ◽  
Vol 9 (1) ◽  
pp. 133-139
Author(s):  
Waleed S. Mohammed ◽  
Ahmed H. El-Shazly ◽  
Marwa F. Elkady ◽  
Masahiro Ohshima

Introduction: The utilization of biodiesel as an alternative fuel is turning out to be progressively famous these days because of worldwide energy deficiency. The enthusiasm for utilizing Jatropha as a non-edible oil feedstock is quickly developing. The performance of the base catalyzed methanolysis reaction could be improved by a continuous process through a microreactor in view of the high mass transfer coefficient of this technique. Materials & Methods: Nanozirconium tungstovanadate, which was synthetized using sol-gel preparation method, was utilized in a complementary step for biodiesel production process. The prepared material has an average diameter of 0.066 &µm. Results: First, the NaOH catalyzed methanolysis of Jatropha oil was investigated in a continuous microreactor, and the efficient mixing over different mixers and its impact on the biodiesel yield were studied under varied conditions. Second, the effect of adding the nanocatalyst as a second stage was investigated. Conclusion: The maximum percentage of produced methyl esters from Jatropha oil was 98.1% using a methanol/Jatropha oil molar ratio of 11 within 94 s using 1% NaOH at 60 &°C. The same maximum conversion ratio was recorded with the nanocatalyst via only 0.3% NaOH.


Sign in / Sign up

Export Citation Format

Share Document