scholarly journals Copper Minerals at Vesuvius Volcano (Southern Italy): A Mineralogical Review

Minerals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 730 ◽  
Author(s):  
Giuseppina Balassone ◽  
Carmela Petti ◽  
Nicola Mondillo ◽  
Taras L. Panikorovskii ◽  
Roberto de Gennaro ◽  
...  

This work is part of a project focused on the Somma–Vesuvius volcano and aimed at identifying Cu minerals related to mineralizing processes associated with magmatic activity in an active magmatic-hydrothermal system. A mineralogical survey was carried out on a set of samples represented by sublimates and fumarolic products from the collection of the Mineralogical Museum of the University of Naples Federico II (Italy). These samples are mainly related to most recent eruptive episodes of Vesuvius activity, from 1631 onward. Copper-bearing minerals were characterized, as well as associated minerals, by X-ray diffraction (XRD) scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS). An investigation on the structural complexity of Cu-mineral assemblages with different temperature formations was also carried out using the TOPOS software package. The main copper phases are sulfates, followed by vanadates, hydroxyhalides, oxides, carbonates, silicates and finally, phosphates. New mineral occurrences for Vesuvius, both Cu-bearing and Cu-free, are described. Nevertheless, the fumarolic/alteration minerals at Vesuvius cannot be considered of economic relevance as a copper reservoir, this type of mineralizations are significant for copper crystal chemistry and for the knowledge of the mineralogical variants. The obtained datasets can be of interest for the knowledge of volcanic byproducts of copper ore deposits (i.e., porphyry copper systems) and of (base) metal segregation processes.

2009 ◽  
Vol 73 (6) ◽  
pp. 1027-1032 ◽  
Author(s):  
F. Nestola ◽  
A. Guastoni ◽  
L. Bindi ◽  
L. Secco

AbstractDalnegroite, ideally Tl4Pb2(As12Sb8)Σ20S34, is a new mineral from Lengenbach, Binntal, Switzerland. It occurs as anhedral to subhedral grains up to 200 μm across, closely associated with realgar, pyrite, Sb-rich seligmanite in a gangue of dolomite. Dalnegroite is opaque with a submetallic lustre and shows a brownish-red streak. It is brittle; the Vickers hardness (VHN25) is 87 kg mm-2(range: 69—101) (Mohs hardness ∼3—3½). In reflected light, dalnegroite is highly bireflectant and weakly pleochroic, from white to a slightly greenish-grey. In cross-polarized light, it is highly anisotropic with bluish to green rotation tints and red internal reflections.According to chemical and X-ray diffraction data, dalnegroite appears to be isotypic with chabournéite, Tl5-xPb2x(Sb,As)21-xS34. It is triclinic, probable space groupP1, witha= 16.217(7) Å,b= 42.544(9) Å,c= 8.557(4) Å, α = 95.72(4)°, β = 90.25(4)°, γ = 96.78(4)°,V= 5832(4) Å3,Z= 4.The nine strongest powder-diffraction lines [d(Å) (I/I0) (hkl)] are: 3.927 (100) (10 0); 3.775 (45) (22); 3.685 (45) (60); 3.620 (50) (440); 3.124 (50) (2); 2.929 (60) (42); 2.850 (70) (42); 2.579 (45) (02); 2.097 (60) (024). The mean of 11 electron microprobe analyses gave elemental concentrations as follows: Pb 10.09(1) wt.%, Tl 20.36(1), Sb 23.95(1), As 21.33(8), S 26.16(8), totalling 101.95 wt.%, corresponding to Tl4.15Pb2.03(As11.86Sb8.20)S34. The new mineral is named for Alberto Dal Negro, Professor in Mineralogy and Crystallography at the University of Padova since 1976.


2011 ◽  
Vol 75 (5) ◽  
pp. 2677-2686 ◽  
Author(s):  
L. Bindi ◽  
C. Carbone ◽  
R. Cabella ◽  
G. Lucchetti

AbstractBassoite, ideally SrV3O7·4H2O, is a new mineral from the Molinello manganese mine, Val Graveglia. eastern Liguria, northern Apennines, Italy. It occurs as black euhedral to subhedral grains up to 400 urn across, closely associated with rhodonite, quartz and braunite. Bassoite is opaque with a sub-metallic lustre and a black streak. It is brittle and neither fracture nor cleavage was observed; the Vickers micro-hardness (VHN100) is 150 kg/mm (range 142—165; corresponding to a Mohs hardness of 4—41/2). The calculated density is 2.940 g/cm3 (on the basis of the empirical formula and X-ray single-crystal data). Bassoite is weakly bireflectant and very weakly pleochroic from grey to a dark green. Internal reflections are absent. The mineral is anisotropic, without characteristic rotation tints. Reflectance percentages (Rmin and Rmax) for the four standard COM wavelengths are 18.5%, 19.0% (471.1 nm); 17.2%, 17.8% (548.3 nm); 16.8%, 17.5% (586.6 nm) and 16.2%, 16.8% (652.3 nm), respectively.Bassoite is monoclinic, space group P21/m, with unit-cell parameters: a = 5.313(3) Å, b = 10.495(3) Å, c = 8.568(4) Å, β = 91.14(5)°, V= 477.7(4) Å3, a:b:c = 0.506:1:0.816, and Z = 2. The crystal structure was refined to R1 = 0.0209 for 1148 reflections with Fo > 4σ(Fo) and it consists of layers of VO5 pyramids (with vanadium in the tetravalent state) pointing up and down alternately with Sr between the layers (in nine-fold coordination). The nine most intense X-ray powder-diffraction lines [d in Å (I/I0) (hkt)] are: 8.5663 (100) (001); 6.6363 (14) (011); 3.4399 (14) (1̄21); 3.4049 (17) (121); 2.8339 (15) (1̄22); 2.7949 (11) (122); 2.6550 (15) (200); 2.6237 (11) (040) and 1.8666 (15) (240). Electron microprobe analyses produce a chemical formula (Sr0.97Ca0.02Na0.01)V3.00O74H20, on the basis of 2(Sr+Ca+Na) = 1, taking the results of the structure refinement into account. The presence of water molecules was confirmed by micro-Raman spectroscopy. The name honours Riccardo Basso (b. 1947), full professor of Mineralogy and Crystallography at the University of Genova. The new mineral and mineral name have been approved by the Commission on New Minerals, Nomenclature and Classification, IMA (2011-028).


2004 ◽  
Vol 68 (2) ◽  
pp. 241-245 ◽  
Author(s):  
A. C. Roberts ◽  
J. A. R. Stirling ◽  
A. J. Criddle ◽  
G. E. Dunning ◽  
J. Spratt

AbstractAurivilliusite, ideally Hg2+Hg1+OI, is monoclinic, C 2/c, with unit-cell parameters refined from X-ray powder data: a= 17.580(6), b= 6.979(1), c= 6.693(3)Å, β = 101.71(4)°, V = 804.0(5)Å3, a:b:c= 2.5190:1:0.9590,Z = 8. The strongest six lines of the X-ray powder-diffraction pattern [din Å (I )(hkl)] are: 8.547(70)(200), 3.275(100)(002), 2.993(80)(2̄21), 2.873(80)(600), 2.404(50b)(6̄02, 421, 2̄22) and 1.878(50)(2̄23). This extremely rare mineral was collected from a small prospect pit near the longabandoned Clear Creek mercury mine, New Idria district, San Benito County, California, USA. It is intimately intermixed with another new undefined Hg-O-I phase (‘CCUK-15’), and is also closely associated with native mercury, cinnabar and edgarbaileyite in a host rock principally composed of quartz and magnesite. Aurivilliusite occurs in a cm-wide quartz vein predominantly as irregular-shaped thin patches ‘splattered’ on the quartz surface; patches vary in size from 10–20 μm up to 0.5 mm. The only known subhedral platy brightly reflecting crystal fragment, with major ﹛100﹜ form and distinct ﹛100﹜ cleavage, did not exceed 0.2 mm in longest dimension. The mineral is dark grey-black with a dark red-brown streak. Physical properties include: metallic lustre; opaque; non-fluorescent; brittle; uneven fracture; calculated density 8.96 g/cm3 (empirical formula), 8.99 g/cm3 (ideal formula). In polished section in plane-polarized reflected light, aurivilliusite resembles cinnabar, is extremely light sensitive, shows twinning and no internal reflections, and exhibits an unusual ‘red light’ coalescing phenomena. Averaged and corrected results of electron-microprobe analyses yielded HgO 40.10, Hg2O 38.62, I 22.76, Br 0.22, Cl 0.06, sum 101.76, less O = I + Br + Cl –1.46, total 100.30 wt.%, corresponding to Hg1.002+Hg1.001+ O1.01(I0.97Br0.01Cl0.01)Σ0.99, based on O + I + Br + Cl = 2 atoms per formula unit (a.p.f.u.). The original value for Hg, 74.27 wt.%, was partitioned in a HgO:Hg2O ratio of 1:1 after the discovery of the crystal-structure paper dealing with the synthetic equivalent of aurivilliusite. The mineral name is in honour of the late Dr Karin Aurivillius (1920 –1982), chemistcrystallographer at the University of Lund, Sweden, for her significant contributions to the crystal chemistry of Hg-bearing inorganic compounds. Aurivilliusite is related chemically to terlinguaite, Hg2+Hg1+OCl, but has a different structure and X-ray characteristics.


2014 ◽  
Vol 78 (4) ◽  
pp. 905-917 ◽  
Author(s):  
I. V. Pekov ◽  
N. V. Zubkova ◽  
V. O. Yapaskurt ◽  
D. I. Belakovskiy ◽  
I. S. Lykova ◽  
...  

AbstractA new mineral, yurmarinite, Na7(Fe3+,Mg,Cu)4(AsO4)6, occurs in sublimates of the Arsenatnaya fumarole at the Second scoria cone of the Northern Breakthrough of the Great Tolbachik Fissure Eruption, Tolbachik volcano, Kamchatka, Russia. It is associated with hatertite, bradaczekite, johillerite, hematite, tenorite, tilasite and aphthitalite. Yurmarinite occurs as well-shaped, equant crystals up to 0.3 mm in size, their clusters up to 0.5 mm and thin, interrupted crystal crusts up to 3 mm × 3 mm on volcanic scoria. Crystal forms are {101}, {011}, {100}, {110} and {001}. Yurmarinite is transparent, pale green or pale yellowish green to colourless. The lustre is vitreous and the mineral is brittle. The Mohs hardness is ∼4½. One direction of imperfect cleavage was observed, the fracture is uneven. D(calc.) is 4.00 g cm−3. Yurmarinite is optically uniaxial (−), ω = 1.748(5), ε = 1.720(3). The Raman spectrum is given. The chemical composition (wt.%, electron microprobe data) is Na2O 16.85, K2O 0.97, CaO 1.28, MgO 2.33, MnO 0.05, CuO 3.17, ZnO 0.97, Al2O3 0.99, Fe2O3 16.44, TiO2 0.06, P2O5 0.12, V2O5 0.08, As2O5 56.68, total 99.89. The empirical formula, calculated on the basis of 24 O atoms per formula unit, is (Na6.55Ca0.28K0.22)S7.05(Fe2.483+Mg0.70Cu0.48Al0.23Zn0.14Ti0.01Mn0.01)S4.05(As5.94P0.02V0.01)S5.97O24. Yurmarinite is rhombohedral, Rc, a = 13.7444(2), c = 18.3077(3) Å, V = 2995.13(8) Å3, Z = 6. The strongest reflections in the X-ray powder pattern [d, Å (I)(hkl)] are: 7.28(45)(012); 4.375(33)(211); 3.440(35)(220); 3.217(36)(131,214); 2.999(30)(223); 2.841(100)(125); 2.598(43)(410). The crystal structure was solved from single-crystal X-ray diffraction data to R = 0.0230. The structure is based on a 3D heteropolyhedral framework formed by M4O18 clusters (M = Fe3+ > Mg,Cu) linked with AsO4 tetrahedra. Sodium atoms occupy two octahedrally coordinated sites in the voids of the framework. In terms of structure, yurmarinite is unique among minerals but isotypic with several synthetic compounds with the general formula (Na7–x☐x)(M3+x3+M1–x2+)(T5+O4)2 in which T = As or P, M3+ = Fe or Al, M2+ = Fe and 0 ≤ x ≤ 1. The mineral is named in honour of the Russian mineralogist, petrologist and specialist in studies of ore deposits, Professor Yuriy B. Marin (b. 1939). The paper also contains a description of the Arsenathaya fumarole and an overview of arsenate minerals formed in volcanic exhalations.


2014 ◽  
Vol 78 (4) ◽  
pp. 1043-1055 ◽  
Author(s):  
D. Pinto ◽  
A. Garavelli ◽  
D. Mitolo

AbstractBalićžunićite, ideally Bi2O(SO4)2, is a new mineral found as a high-temperature fumarole sublimate (T = 600°C) at La Fossa crater, Vulcano, Aeolian Islands, Italy. It occurs as aggregates of mm-sized prismatic and elongated crystals (∼50 μm across and up to 200 μm long) associated with anglesite, leguernite, one other potentially new Bi-oxysulfate mineral, lillianite, galenobismutite, bismoclite, Cd-rich sphalerite, wurtzite, pyrite and pyrrhotite. Balićžunićite is colourless to white or pale brown, transparent and non-fluorescent. It has a vitreous lustre and a white streak. Electron microprobe analysis gives the following average chemical composition (wt.%): Bi2O3 68.68 and SO3 23.73, total 92.41. The empirical chemical formula, calculated on the basis of 9 anions p.f.u., is Bi1.99S2O9. The calculated density is 5.911 g/cm3.Balićžunićite is triclinic, space group P, with a 6.7386(3), b 11.1844(5), c 14.1754(7) Å, α 80.082(2)°, β 88.462(2)°, γ 89.517(2)°, V = 1052.01(8) Å3 and Z = 6. The six strongest reflections in the X-ray powder-diffraction data [d in Å(I) (hkl)] are: 3.146 (100) (033), 3.486 (21) (004), 3.409 (12) (01), 3.366 (7) (200), 5.562 (4) (11), 5.433 (4) (111). Balićžunićite is the natural analogue of the stable low-temperature a form of synthetic Bi2O(SO4)2. The name is in honour of Tonci Balić-Žunić(born 1952), Professor of Mineralogy at the Natural History Museum of the University of Cophenagen. Both the mineral and the mineral name have been approved by the IMA-CNMNC Commission (IMA2012-098).


2020 ◽  
Vol 115 (2) ◽  
pp. 231-239 ◽  
Author(s):  
Jeffrey W. Hedenquist ◽  
Yasushi Watanabe ◽  
Antonio Arribas

Abstract Surface samples of hypogene alunite that cement late breccia bodies from the El Salvador porphyry copper district of Chile were recently dated. One alunite sample over the principal Turquoise Gulch porphyry deposit has a 40Ar/39Ar total gas age of 40.64 ± 1.04 Ma, overlapping the age of a late latite intrusion. Two other samples associated with quartz-alunite replacement of rhyolite, ~750 m southwest of the collapse zone over the block cave of the porphyry copper deposit, are distinctly younger, at 38.12 ± 0.66 and 38.04 ± 0.22 Ma (averages of duplicate analyses, with ±2σ errors). Previously reported U/Pb ages of zircons from 15 Eocene-age diorite, granodiorite, and granite porphyry intrusions have weighted mean ages that range from about 44 to 41 Ma, with peak magmatic flux interpreted at 44 to 43 Ma. Porphyry copper ores in the El Salvador district formed at about the same time as porphyry intrusions, with intrusive centers that migrated in a south-southwest direction, from the small deposits at Cerro Pelado (~44.2 Ma), to Old Camp (~43.6 Ma) and M Gulch-Copper Hill (~43.5–43.1 Ma), to the main ore deposit at Turquoise Gulch (~42 Ma). The granodiorite porphyry intrusions at Turquoise Gulch are associated with ~80% of the known copper ore of the district; they record waning stages of magmatism at 42.5 to 42.0 Ma, followed by weakly altered latite dikes at 41.6 Ma. Molybdenite in quartz veins returned Re-Os ages of 41.8 to 41.2 Ma. The two alunite samples from our study with coincident dates of ~38 Ma provide evidence for magmatic-hydrothermal activity younger than any recognized to date, consistent with the alteration overprint of quartz-alunite on older muscovite after erosion. This younger activity must have been associated with a blind intrusion, likely located south of the Turquoise Gulch deposit, based on the distribution of alteration minerals, and offset from the zoning associated with the Turquoise Gulch center. Stable isotope values (δ34S, δ18O, δD) of the ~38 Ma alunite indicate a high-temperature hypogene origin, consistent with formation in a lithocap environment that typically is located at shallow levels over and on the shoulders of porphyry copper deposits. Both observations—alteration overprint and markedly younger age of alunite—indicate the potential for porphyry copper mineralization south of Granite Gulch, as much as 1,000 m below the level of the coeval outcropping quartz-alunite replacement, perhaps near ~2,000-m elevation; this is hundreds of meters deeper than the known copper ore of Turquoise Gulch.


2017 ◽  
Vol 81 (5) ◽  
pp. 1151-1159 ◽  
Author(s):  
Luca Bindi ◽  
Hubert Putz ◽  
Werner H. Paar ◽  
Christopher J. Stanley

AbstractOmariniite, ideally Cu8Fe2ZnGe2S12, represents the Ge-analogue of stannoidite and was found in bornite-chalcocite-rich ores near the La Rosario vein of the Capillitas epithermal deposit, Catamarca Province, Argentina. The mineral is associated closely with three other Ge-bearing minerals (putzite, catamarcaite, rarely zincobriartite) and bornite, chalcocite, digenite, covellite, sphalerite, tennantite, luzonite, wittichenite, thalcusite and traces of mawsonite. The width of the seams rarely exceeds 60 μm, their length can attain several 100 μm. The mineral is opaque, orange-brown in polished section, has a metallic lustre and a brownish-black streak. It is brittle, and the fracture is irregular to subconchoidal. Neither cleavage nor parting are observable in the sections. In plane-polarized light omariniite is brownish-orange and has a weak pleochroism. Internal reflections are absent. The mineral is distinctly anisotropic with rotation tints varying between brownish-orange and greenish-brown. The average result of 45 electron-microprobe analyses is Cu 42.18(34), Fe 9.37(26), Zn 5.17(43), In 0.20(6), Ge 11.62(22), S 31.80(20), total 100.34(46) wt.%. The empirical formula, based on Σ(Me + S) = 25, is Cu8.04(Fe2.03In0.02)Σ2.05Zn0.96 Ge1.94S12.01, ideally Cu8+Fe2+Zn2+Ge24+S122-. Omariniite is orthorhombic, space group I222, with unit-cell parameters: a = 10.774(1), b = 5.3921(5), c = 16.085(2) Å, V = 934.5(2) Å3, a:b:c = 1.9981:1:2.9831, Z = 2. X-ray single-crystal studies (R1 = 0.023) revealed the structure to be a sphalerite derivative identical to that of stannoidite. Omariniite is named after Dr. Ricardo Héctor Omarini (1946–2015), Professor at the University of Salta, for his numerous contributions to the geology of Argentina.


2006 ◽  
Vol 62 (3) ◽  
pp. 447-456 ◽  
Author(s):  
Michel Evain ◽  
Luca Bindi ◽  
Silvio Menchetti

The crystal structures of 222- and 221-polybasite [(Ag,Cu)16(Sb,As)2S11] crystals have been solved and refined by means of X-ray diffraction data (collected at 100 and 120 K, respectively) from twinned crystals. Both structures consist of the stacking of [(Ag,Cu)6Sb2S7]2− and [Ag9CuS4]2+ module layers in which Sb forms isolated SbS3 pyramids typically occurring in sulfosalts; copper links two S atoms in a linear coordination and silver occupies sites with coordination ranging from quasi-linear to almost tetrahedral. An Ag → Cu substitution in the [(Ag,Cu)6Sb2S7]2− module layer is observed in both structures, the substitution amount being larger in the 221- than in the 222-polybasite. A pattern of the possible mechanism regulating the type of unit cell that is stabilized is proposed: starting from the hypothetical stoichiometric and fully ordered Ag15CuSb2S11 222-polybasite structure, with a low C2/c monoclinic symmetry and a large 222 supercell, the disorder introduced by the substitution of Cu for Ag increases the symmetry with a cell reduction along the c axis yielding the 221 supercell and a trigonal crystal system. A further increase of the substitution gives rise to a folding of the cell along the a and b axes and the 111-pearceite structure, space group P\bar3m1.


2009 ◽  
Vol 73 (1) ◽  
pp. 131-148 ◽  
Author(s):  
P. Elliott ◽  
U. Kolitsch ◽  
G. Giester ◽  
E. Libowitzky ◽  
C. McCammon ◽  
...  

Plimerite, ideally Zn (PO4)3(OH)5, is a new mineral from the Block 14 Opencut, Broken Hill, New SouthWales. It occurs as pale-green to dark-olive-green, almost black, acicular to prismatic and bladed crystals up to 0.5 mm long and as hemispherical aggregates of radiating acicular crystals up to 3 mm across. Crystals are elongated along [001] and the principal form observed is {100} with minor {010} and {001}. The mineral is associated with hinsdalite-plumbogummite, pyromorphite, libethenite, brochantite, malachite, tsumebite and strengite. Plimerite is translucent with a pale-greyish-green streak and a vitreous lustre. It shows an excellent cleavage parallel to {100} and {010} and distinct cleavage parallel to {001}. It is brittle, has an uneven fracture, a Mohs’ hardness of 3.5–4, D(meas.) = 3.67(5) g/cm3 and D(calc.) = 3.62 g/cm3 (for the empirical formula). Optically, it is biaxial negative with α = 1.756(5), β = 1.764(4), γ = 1.767(4) and 2V(calc.) of –63º; pleochroism is X pale-greenish-brown, Y pale-brown, Z pale-bluish-green; absorption Z > X > Y; optical orientation XYZ = cab. Plimerite is orthorhombic, space group Bbmm, unit-cell parameters: a = 13.865(3) Å, b = 16.798(3) Å, c = 5.151(10) Å, V = 1187.0(4) Å3 (single-crystal data) and Z = 4. Strongest lines in the X-ray powder diffraction pattern are [d (A˚ ), I, hkl]: 4.638, (50), (111); 3.388, (50), (041); 3.369, (55), (131); 3.168, (100), (132); 2.753, (60), (115); 2.575, (90), (200); 2.414, (75), (220); 2.400, (50), (221); 1.957, (40), (225). Electron microprobe analysis yielded (wt.%): PbO 0.36, CaO 0.17, ZnO 20.17, MnO 0.02, Fe2O3 29.82, FeO 2.98, Al2O3 4.48, P2O5 32.37, As2O5 0.09, H2O (calc) 6.84, total 97.30 (Fe3+/Fe2+ ratio determined by Mössbauer spectroscopy). The empirical formula calculated on the basis of 17 oxygens is Ca0.02Pb0.01Zn1.68Al0.60P3.09As0.01O17.00H5.15. The crystal structure was solved by direct methods and refined to an R1 index of 6.41% for 1332 observed reflections from single-crystal X-ray diffraction data (Mo-Kα radiation, CCD area detector). The structure of plimerite is isotypic with that of rockbridgeite and is based on face-sharing trimers of (Mϕ6) octahedra which link by sharing edges to form chains, that extend in the b-direction. Chains link to clusters comprising pairs of corner-sharing (Mϕ6) octahedra that link to PO4 tetrahedra forming sheets parallel to (001). The sheets link via octahedra and tetrahedra corners into a heteropolyhedral framework structure. The mineral name honours Professor Ian Plimer for his contributions to the study of the geology of ore deposits.


2006 ◽  
Vol 70 (18) ◽  
pp. A82 ◽  
Author(s):  
O. Cardon ◽  
L. Reisberg ◽  
A.S. Andre-Mayer ◽  
J. Leroy ◽  
V. Milu

Sign in / Sign up

Export Citation Format

Share Document