scholarly journals Editorial for the Special Issue “Platinum-Group Minerals: New Results and Advances in PGE Mineralogy in Various Ni-Cu-Cr-PGE Ore Systems”

Minerals ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 365 ◽  
Author(s):  
Andrei Y. Barkov ◽  
Federica Zaccarini
Keyword(s):  
Platinum Group Elements ◽  
Special Issue ◽  
Accessory Minerals ◽  
Platinum Group Minerals ◽  
Platinum Group

The platinum-group minerals (PGM) consist of a group of accessory minerals that concentrate the six platinum-group elements (PGE): osmium (Os), iridium (Ir), ruthenium (Ru), rhodium (Rh), platinum (Pt), and palladium (Pd) [...]

Platinum-group minerals in the middle group of chromitite layers at Marikana, western Bushveld Complex: indications for collection mechanisms and postmagmatic modification

1992 ◽  
Vol 29 (2) ◽  
pp. 209-221 ◽  
Author(s):  
Roland K. W. Merkle
Keyword(s):  
Base Metal ◽  
Bushveld Complex ◽  
Platinum Group Elements ◽  
Critical Zone ◽  
Significant Loss ◽  
Drill Core ◽  
Middle Group ◽  
Platinum Group Minerals ◽  
Base Metal Sulphides ◽  
Platinum Group

The platinum-group minerals in a drill core taken through the middle group of chromitite layers in the Critical Zone at Marikana in the western Bushveld Complex were found to consist mainly of laurite as inclusions in chromite grains. The platinum-group minerals containing Pt, Pd, and Rh are concentrated in the intercumulus silicates and frequently associated with base-metal sulphides. Up to about 20% of all platinum-group minerals in the investigated chromitite layers contain sub stantial amounts of As. The base-metal sulphides are strongly modified in the postmagmatic stage, which led to a significant loss of Fe and S, in this way concentrating Cu, Ni, and the platinum-group elements by factors of up to 10. Interaction between chromite and base-metal sulphides cannot account for all the Fe lost in chromite-poor samples, and the importance of additional processes is indicated. Inclusions in chromite and orthopyroxene indicate the formation of discrete platinum-group minerals and As-rich phases before the formation of an immiscible sulphide melt. Resorption of earlier formed platinum-group minerals into the immiscible sulphide melt and postmagmatic sulphidation destroyed most of the evidence of the early formed platinum-group minerals.

Genesis of the Jinbaoshan PGE-(Cu)-(Ni) deposit: Distribution of chalcophile elements and platinum-group minerals

2021 ◽  
Vol 59 (6) ◽  
pp. 1511-1542
Author(s):  
Yiguan Lu ◽  
C. Michael Lesher ◽  
Liqiang Yang ◽  
Matthew I. Leybourne ◽  
Wenyan He ◽  
...  
Keyword(s):  
Solid Solution ◽  
Platinum Group Element ◽  
Platinum Group Elements ◽  
Group Element ◽  
Monosulfide Solid Solution ◽  
Platinum Group Minerals ◽  
Pd Alloy ◽  
Platinum Group ◽  
Lower Temperature ◽  
Subduction System

ABSTRACT The Jinbaoshan platinum group element-(Cu)-(Ni) deposit in southwest China is a sulfide-poor magmatic platinum-group element deposit that experienced multiple phases of post-magmatic modification. The sulfide assemblages of most magmatic Ni-Cu-platinum-group element deposits in China and elsewhere in the world are dominated by pentlandite-pyrrhotite-chalcopyrite with lesser magnetite and minor platinum-group minerals. However, Jinbaoshan is characterized by (1) hypogene violarite-pyrite 1-millerite-chalcopyrite and (2) supergene violarite-(polydymite)-pyrite 2-chalcopyrite assemblages. The platinum-group minerals are small (0.5–10 μm diameter) and include moncheite Pt(Te,Bi)2, mertieite-I Pd11(Sb,As)4, the atokite Pd3Sn – rustenburgite Pt3Sn solid solution, irarsite IrAsS, and sperrylite PtAs2 hosted mainly by violarite, silicates (primarily serpentine), and millerite. The platinum-group minerals occur in two sulfide assemblages: (1) mertieite-I-dominant (with irarsite, palladium, and Pd-alloy) in the hypogene assemblage and (2) moncheite-dominant (with irarsite, sperrylite, and atokite) in the supergene assemblage. Palladium and intermediate platinum-group elements (Os, Ir, Ru) are concentrated mainly in violarite, polydymite, and pyrite 2. Platinum is seldom hosted by base metal sulfides and occurs mainly as discrete platinum-group minerals, such as moncheite, sperrylite, and merenskyite. Violarite and polydymite in the Jinbaoshan deposit contain more Pb-Ag than pentlandite and pyrrhotite in the Great Dyke and Lac des Iles deposit. The formation of the sulfide assemblages in Jinbaoshan can be interpreted to have occurred in three stages: (1) a magmatic Fe-Ni-Cu sulfide melt crystallized Fe-Ni monosulfide and Cu-rich intermediate solid solutions, which inverted to a primary pyrrhotite-pentlandite-chalcopyrite-magnetite assemblage; (2) an early-secondary hypogene voilarite-millterite-pyrite 1-chalcopyrite assemblage formed by interaction with a lower-temperature magmatic-hydrothermal deuteric fluid; and (3) a late-secondary supergene violarite-polydymite-pyrite 2-chalcopyrite assemblage formed during weathering. Late-magmatic-hydrothermal fluids enriched the mineralization in Pb-Ag-Cd-Zn, which are incompatible in monosulfide solid solution, added Co-Pt into violarite, and expelled Pd to the margins of hypogene violarite and millerite, which caused Pd depletion in the hypogene violarite and the formation of mertieite-I. Supergene violarite inherited Pd and intermediate platinum-group elements from primary pentlandite. Thus, the unusual sulfide assemblages in the Jinbaoshan platinum-group element-(Cu)-(Ni) deposit results from multiple overprinted post-magmatic processes, but they did not significantly change the chalcophile element contents of the mineralization, which is interpreted to have formed at high magma:sulfide ratios (R factors) through interaction of crustally derived sulfide and a hybrid picritic-ferropicritic magma derived from subduction-metasomatized pyroxenitic mantle during impingement of the Emeishan plume on the Paleo-Tethyan oceanic subduction system.

scholarly journals Hydrothermal remobilization platinum group elements and their secondary minerals in chromitite deposits of the Eastern Sayan ophiolites (Russia)

2019 ◽  
Vol 98 ◽  
pp. 08014
Author(s):  
Ol’ga Kiseleva ◽  
Evgeniya Airiyants ◽  
Dmytriy Belyanin ◽  
Sergey Zhmodik
Keyword(s):  
Fluid Phase ◽  
Platinum Group Elements ◽  
Base Metals ◽  
Crustal Fluid ◽  
Platinum Group Minerals ◽  
Mantle Peridotites ◽  
Mantle Fluids ◽  
Platinum Group ◽  
Hydrothermal Remobilization ◽  
Eastern Sayan

Serpentinization is an important post-magmatic process in spreading and subducted zones. This process is the cause of the remobilization and redistribution of highly mobile elements, platinum group elements (PGE) and base metals. Secondary platinum group minerals (PGMs) formed because of PGE remobilization under the action of mantle and crustal fluid on the rocks. The formation of the secondary PGMs can occur in several stages. Under the effect on the chromitites of reduced mantle fluids, native PGE alloys were formed during early serpentinization. Under dehydrating subducted slab fluid phase was caused in serpentinization mantle peridotites and have been dissolved magmatic high-temperature platinum group minerals. During the obduction of ophiolites, an inversion from reducing to oxidizing condition took place with the formation of nickel arsenides and As, Sb – bearing PGMs.

Supergene mobilization and redistribution of platinum-group elements in the Merensky Reef, eastern Bushveld Complex, South Africa

2021 ◽  
Vol 59 (6) ◽  
pp. 1381-1396
Author(s):  
Maximilian Korges ◽  
Malte Junge ◽  
Gregor Borg ◽  
Thomas Oberthür
Keyword(s):  
South Africa ◽  
Platinum Group Element ◽  
Bushveld Complex ◽  
Platinum Group Elements ◽  
Element Distribution ◽  
Group Element ◽  
Recovery Rates ◽  
Merensky Reef ◽  
Platinum Group Minerals ◽  
Platinum Group

ABSTRACT Near-surface supergene ores of the Merensky Reef in the Bushveld Complex, South Africa, contain economic grades of platinum-group elements, however, these are currently uneconomic due to low recovery rates. This is the first study that investigates the variation in platinum-group elements in pristine and supergene samples of the Merensky Reef from five drill cores from the eastern Bushveld. The samples from the Richmond and Twickenham farms show different degrees of weathering. The whole-rock platinum-group element distribution was studied by inductively coupled plasma-mass spectrometry and the platinum-group minerals were investigated by reflected-light microscopy, scanning electron microscopy, and electron microprobe analysis. In pristine (“fresh”) Merensky Reef samples, platinum-group elements occur mainly as discrete platinum-group minerals, such as platinum-group element-sulfides (cooperite–braggite) and laurite as well as subordinate platinum-group element-bismuthotellurides and platinum-group element-arsenides, and also in solid solution in sulfides (especially Pd in pentlandite). During weathering, Pd and S were removed, resulting in a platinum-group mineral mineralogy in the supergene Merensky Reef that mainly consists of relict platinum-group minerals, Pt-Fe alloys, and Pt-oxides/hydroxides. Additional proportions of platinum-group elements are hosted by Fe-hydroxides and secondary hydrosilicates (e.g., serpentine group minerals and chlorite). In supergene ores, only low recovery rates (ca. 40%) are achieved due to the polymodal and complex platinum-group element distribution. To achieve higher recovery rates for the platinum-group elements, hydrometallurgical or pyrometallurgical processing of the bulk ore would be required, which is not economically viable with existing technology.

The effects of post-cumulus alteration on the distribution of chalcophile elements in magmatic sulfide deposits and implications for the formation of low-S-high-PGE zones: The Luanga deposit, Carajás Mineral Province, Brazil

2021 ◽  
Vol 59 (6) ◽  
pp. 1453-1484
Author(s):  
Eduardo Mansur ◽  
Sarah-Jane Barnes ◽  
Cesar F. Ferreira Filho
Keyword(s):  
Base Metal ◽  
Platinum Group Element ◽  
Platinum Group Elements ◽  
Group Element ◽  
Metal Sulfides ◽  
Chalcophile Elements ◽  
Platinum Group Minerals ◽  
Base Metal Sulfides ◽  
Magmatic Sulfide ◽  
Platinum Group

ABSTRACT Most of the World's platinum-group element ore deposits occur as thin stratiform layers within layered intrusions. These layers generally contain disseminated base-metal sulfides or chromite. However, cryptic platinum-group element deposits also occur without chromite or base-metal sulfides in what are known as low-S-high platinum-group element deposits. The origin of these deposits is not clearly understood. The Luanga Complex hosts the largest platinum-group elements resource in South America (i.e., 142 Mt at 1.24 ppm Pt + Pd + Au and 0.11% Ni) and hosts both a platinum-group element deposit containing disseminated base-metal sulfides (style 1) and a low-S-high platinum-group element deposit (style 2). It therefore offers the opportunity to compare the two deposit types in the same overall geological setting and consider how the low-S-high platinum-group element deposit could have formed. The first deposit style is termed the Sulfide zone and consists of a 10–50 meter-thick interval with disseminated base metal sulfides, whereas the second style is named low-S-high-Pt-Pd zone and consists of 2–10 meter-thick discontinuous lenses of 1–5 meter-thick sulfide- and oxide-free harzburgite and orthopyroxenite with discrete platinum-group minerals. Secondary assemblages commonly replace primary igneous minerals to a variable extent throughout the deposit, and thus allow for investigating the effects of post-cumulus alteration on the distribution of a wide range of chalcophile elements in a magmatic sulfide deposit at both whole-rock and mineral scale. This study presents the whole-rock distribution of S, platinum-group elements, and Te, As, Bi, Sb, and Se in both mineralization styles and the concentration of trace elements in base-metal sulfides from the Sulfide zone. The Sulfide zone has Pt/Pd ratios around 0.5 and high concentrations of Te, As, Bi, Sb, and Se, whereas the low-S-high-platinum-group element zone has Pt/Pd ratios greater than 1 and much lower Se, Te, and Bi concentrations, but comparable As and Sb contents. This is reflected in the platinum-group element assemblage, comprising bismuthotellurides in the Sulfide zone and mostly arsenides and antimonides in the low-S, high platinum-group elements zone. Moreover, the base-metal sulfides from the Sulfide zone have anomalously high As contents (50–500 ppm), which suggest that the sulfide liquid segregated from a very As-rich silicate magma, possibly illustrated by an average komatiitic basalt that assimilated a mixture of upper continental crust and black shales. We interpret the low-S-high platinum-group elements zone as a product of S loss from magmatic sulfides during post-cumulus alteration of the Luanga Complex. Selenium, Te, Bi, and Pd were also lost together with S, whereas As and Sb were expelled from base-metal sulfide structures and combined with platinum-group elements to form platinum-group minerals, suggesting they may play a role fixating platinum-group elements during alteration. The remobilization of chalcophile elements from magmatic sulfide deposits located in the Carajás Mineral Province may represent a potential source for hydrothermal deposits found in the region.

scholarly journals The Geological Occurrence, Mineralogy, and Processing by Flotation of Platinum Group Minerals (PGMs) in South Africa and Russia

Minerals ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 54
Author(s):  
Cyril O’Connor ◽  
Tatiana Alexandrova
Keyword(s):  
South Africa ◽  
Black Shale ◽  
Platinum Group Elements ◽  
Low Grade ◽  
Platinum Group Minerals ◽  
Vanadium Iron ◽  
Platinum Group ◽  
Novel Processing ◽  
Efficient Recovery ◽  
High Level

Russia and South Africa are the world’s leading producers of platinum group elements (PGEs). This places them in a unique position regarding the supply of these two key industrial commodities. The purpose of this paper is to provide a comparative high-level overview of aspects of the geological occurrence, mineralogy, and processing by flotation of the platinum group minerals (PGMs) found in each country. A summary of some of the major challenges faced in each country in terms of the concentration of the ores by flotation is presented alongside the opportunities that exist to increase the production of the respective metals. These include the more efficient recovery of minerals such as arsenides and tellurides, the management of siliceous gangue and chromite in the processing of these ores, and, especially in Russia, the development of novel processing routes to recover PGEs from relatively low grade ores occurring in dunites, black shale ores and in vanadium-iron-titanium-sulphide oxide formations.

Sign in / Sign up

Export Citation Format

Share Document