scholarly journals Activation Mechanism of Lead Ions in Perovskite Flotation with Octyl Hydroxamic Acid Collector

Minerals ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 341 ◽  
Author(s):  
Yu Zheng ◽  
Yating Cui ◽  
Weiqing Wang
Keyword(s):  
Zeta Potential ◽  
Photoelectron Spectroscopy ◽  
Hydroxamic Acid ◽  
Relative Content ◽  
Lead Ions ◽  
Activation Mechanism ◽  
X Ray ◽  
Ft Ir ◽  
Acidic Conditions ◽  
Ir Analysis

The activation mechanism of lead ions (Pb2+) in perovskite flotation with an octyl hydroxamic acid collector was systematically investigated using microflotation experiments, zeta-potential measurements, adsorption tests, Fourier transform infrared (FT-IR) analysis, and X-ray photoelectron spectroscopy (XPS) analysis. The results of microflotation experiments and adsorption tests indicate that the presence of Pb2+ can promote the adsorption of octyl hydroxamic acid (OHA) on the perovskite surface and enhance the flotability of perovskite under weakly acidic conditions. The maximum recovery of 79.62% was obtained at pH 6.5 in the presence of Pb2+, and the maximum recovery of 57.93% was obtained at pH 5.7 without Pb2+. At pHs below 7, lead species are mainly present as Pb2+ and PbOH+ in the solution; besides this, the relative content of titanium increases on the perovskite surface. The adsorption of Pb2+ and PbOH+ on the perovskite surface makes the zeta-potential of perovskite shift positively, and increases the number of activated sites on the perovskite surface. FT-IR and XPS analyses confirm that OHA chemisorbs on the surface of Pb2+-activated perovskite and forms hydrophobic Pb-OHA complexes, which improve the flotability of perovskite.

scholarly journals Bastnaesite, Barite, and Calcite Flotation Behaviors with Salicylhydroxamic Acid as the Collector

Minerals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 282 ◽  
Author(s):  
Wenliang Xiong ◽  
Jie Deng ◽  
Kaile Zhao ◽  
Weiqing Wang ◽  
Yanhong Wang ◽  
...  
Keyword(s):  
Zeta Potential ◽  
Photoelectron Spectroscopy ◽  
Physical Adsorption ◽  
Solution Chemistry ◽  
Chemical Adsorption ◽  
Salicylhydroxamic Acid ◽  
X Ray ◽  
Ft Ir ◽  
Bastnaesite Flotation ◽  
Flotation Behavior

The flotation of bastnaesite, as a major mineral source of rare earth elements, attracting much attention in the mineral processing field, is challenging owing to the natural flotability of calcium-bearing minerals. To promote the application of flotation, we systematically investigated the flotation behavior of bastnaesite, barite, and calcite, with salicylhydroxamic acid (SHA) as the collector through micro-flotation experiments, zeta-potential measurements, Fourier transform infrared (FT-IR) analyses, X-ray photoelectron spectroscopy (XPS) analyses, and solution chemistry analyses. Micro-flotation experiments confirm that the flotability of bastnaesite is high at pH 6.5–8.5, while calcite floats at pH 8.0–9.5, and barite has little flotation response. The results of FT-IR, XPS, and zeta-potential measurements indicate that there is chemical adsorption of SHA on the bastnaesite surface, and physical adsorption also occurs. However, as for barite and calcite, there is only physical adsorption of SHA on the surfaces. The solution chemistry results show that SHA anions can interact with RE3+, REOH2+, and RE(OH)2+ on bastnaesite surfaces in aqueous suspensions, resulting in bastnaesite flotation.

Synthesis and Evaluation of Levulinic Ester as Biodiesel Additives

2020 ◽  
Vol 71 (8) ◽  
pp. 21-26
Author(s):  
Elena-Emilia Oprescu ◽  
Cristina-Emanuela Enascuta ◽  
Elena Radu ◽  
Vasile Lavric
Keyword(s):  
Maximum Yield ◽  
Strength Distribution ◽  
Point Of View ◽  
Reaction Parameters ◽  
X Ray ◽  
Ethyl Levulinate ◽  
Ft Ir ◽  
Ir Analysis ◽  
Biodiesel Blend ◽  
Acid Strength Distribution

In this study, the SO42-/TiO2-La2O3-Fe2O3 catalyst was prepared and tested in the conversion of fructose to ethyl levulinate . The catalyst was characterized from the point of view of the textural analysis, FT-IR analysis, acid strength distribution, X-ray powder diffraction and pyridine adsorption IR spectra. The influence of the reaction parameters on the ethyl levulinate yield was study. The maximum yield of 37.95% in levulinate esters was obtained at 180 �C, 2 g catalyst and 4 h reaction time. The effect of ethyl levulinate addition to diesel-biodiesel blend in different rates, i.e, 0.5, 1, 2.5, 5 (w.t %) on density, kinematic viscosity and flash point was evaluated and compared with the European specification.

scholarly journals Synthesis of Magnetic Ferrocene-Containing Polymer with Photothermal Effects for Rapid Degradation of Methylene Blue

Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 558
Author(s):  
Wenhui Zhu ◽  
Caiyun Zhang ◽  
Yali Chen ◽  
Qiliang Deng
Keyword(s):  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Degradation Rate ◽  
Model Compound ◽  
Vibrating Sample Magnetometer ◽  
Simulated Sunlight ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Photothermal materials are attracting more and more attention. In this research, we synthesized a ferrocene-containing polymer with magnetism and photothermal properties. The resulting polymer was characterized by Fourier-transform infrared (FT-IR), vibrating sample magnetometer (VSM), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). Its photo-thermocatalytic activity was investigated by choosing methylene blue (MB) as a model compound. The degradation percent of MB under an irradiated 808 nm laser reaches 99.5% within 15 min, and the degradation rate is 0.5517 min−1, which is 145 times more than that of room temperature degradation. Under irradiation with simulated sunlight, the degradation rate is 0.0092 min−1, which is approximately 2.5 times more than that of room temperature degradation. The present study may open up a feasible route to degrade organic pollutants.

Preparation of xanthated bentonite and its removal behavior for Pb(II) ions

2010 ◽  
Vol 61 (5) ◽  
pp. 1235-1243 ◽  
Author(s):  
Y. F. He ◽  
F. R. Li ◽  
R. M. Wang ◽  
F. Y. Li ◽  
Y. Wang ◽  
...  
Keyword(s):  
Adsorption Mechanism ◽  
Removal Rate ◽  
Freundlich Isotherm ◽  
Particle Size Analysis ◽  
Lead Ions ◽  
Size Analysis ◽  
Optimum Conditions ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir

Xanthate was successfully grafted onto bentonite by a relatively simple solution reaction. The obtained xanthated bentonite (XBent) was characterized by FT-IR spectrophotometer, thermogravimetric analysis (TG), particle size analysis, x-ray diffraction (XRD) and scanning electron microscopy (SEM). XBent acting as a type of environmentally friendly adsorbent was applied to remove lead ions from aqueous solutions. The optimum conditions were as follows: [Pb2 + ] = 500 mg L−1, [XBent] = 2 g L−1, pH = 5.0; oscillating 60 min under 200 rpm at 25°C. The removal rate of lead was up to 99.9%. It was found that the lead(II) ions—XBent adsorption isotherm model fitted well to the Freundlich isotherm. The adsorption mechanism was also investigated by SEM and XRD, which concluded that lead ions were complexed or chelated with XBent. XBent appears to have potential to be used later in water treatment as a type of inorganic polymer reagent.

Chemical Structures of Native Oxides Formed During Wet Chemical Treatments on NH4F Treated Si(111) Surfaces

1992 ◽  
Vol 259 ◽  
Author(s):  
Takeo Hattori ◽  
Hiroki Ogawa
Keyword(s):  
Photoelectron Spectroscopy ◽  
Attenuated Total Reflection ◽  
Native Oxide ◽  
X Ray ◽  
Chemical Treatments ◽  
Chemical Structures ◽  
Native Oxides ◽  
Ft Ir ◽  
Wet Chemical ◽  
Silicon Interface

ABSTRACTChemical structures of native oxides formed during wet chemical treatments on NH4F treated Si(111) surfaces were investigated using X-ray Photoelectron Spectroscopy (XPS) and Fourier Transformed Infrared Attenuated Total Reflection(FT-IR-ATR). It was found that the amounts of Si-H bonds in native oxides and those at native oxide/silicon interface are negligibly small in the case of native oxides formed in H2SO4-H2O2-H2O solution. Based on this discovery, it was confirmed that native oxides can be characterized by the amount of Si-H bonds in native oxides. Furthermore, it was found that the combination of various wet chemical treatments with the treatment in NH4OH-H2O2-H2O solution results in the drastic decrease in the amount of Si-H bonds in native oxides.

scholarly journals Dual Light- and pH-Responsive Composite of Polyazo-Derivative Grafted Cellulose Nanocrystals

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1725 ◽  
Author(s):  
Xiaohong Liu ◽  
Ming Li ◽  
Xuemei Zheng ◽  
Elias Retulainen ◽  
Shiyu Fu
Keyword(s):  
Cellulose Nanocrystals ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
X Ray Diffraction ◽  
Responsive Materials ◽  
X Ray ◽  
Ph Response ◽  
Transmission Electron ◽  
Ft Ir ◽  
Hexyl Methacrylate

As a type of functional group, azo-derivatives are commonly used to synthesize responsive materials. Cellulose nanocrystals (CNCs), prepared by acid hydrolysis of cotton, were dewatered and reacted with 2-bromoisobuturyl bromide to form a macro-initiator, which grafted 6-[4-(4-methoxyphenyl-azo) phenoxy] hexyl methacrylate (MMAZO) via atom transfer radical polymerization. The successful grafting was supported by Fourier transform infrared spectroscopy (FT-IR) and Solid magnetic resonance carbon spectrum (MAS 13C-NMR). The morphology and surface composition of the poly{6-[4-(4-methoxyphenylazo) phenoxy] hexyl methacrylate} (PMMAZO)-grafted CNCs were confirmed with Transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The grafting rate on the macro-initiator of CNCs was over 870%, and the polydispersities of branched polymers were narrow. The crystal structure of CNCs did not change after grafting, as determined by X-ray diffraction (XRD). The polymer PMMAZO improved the thermal stability of cellulose nanocrystals, as shown by thermogravimetry analysis (TGA). Then the PMMAZO-grafted CNCs were mixed with polyurethane and casted to form a composite film. The film showed a significant light and pH response, which may be suitable for visual acid-alkali measurement and reversible optical storage.

Preparation and Characterization of Ni2+-Montmorillonite/Polyvinyl Alcohol Water-Soluble Nanocomposite Film

2005 ◽  
Vol 13 (8) ◽  
pp. 839-846 ◽  
Author(s):  
Li-Ping Wang ◽  
Yun-Pu Wang ◽  
Fa-Ai Zhang
Keyword(s):  
Polyvinyl Alcohol ◽  
Photoelectron Spectroscopy ◽  
Thermal Characteristics ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
Xps Spectra ◽  
X Ray ◽  
Alcohol Water ◽  
Ft Ir ◽  
Silicate Layers

A new type of nano-composite film was prepared from polyvinyl alcohol, Ni2+-montmorillonite (Ni2+-MMT), defoamer, a levelling agent and a plasticizer. Its thermal characteristics were studied by Differential Scanning Calorimetry (DSC). The intermolecular interactions were measured by Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), and the tensile strength (TS) and elongation at break (%E) were measured. The microstructures were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). FT-IR and XPS spectra indicated that cross-linking has taken place between PVA and Ni2+-MMT. XRD and AFM indicate that the PVA molecules had inserted themselves into the silicate layers of MMT, exfoliating them and dispersing them randomly into the PVA matrix. Compared to pure PVA film, the TS of the films was increased and %E decreased when the Ni2+-Montmorillonite was added and the dissolution temperature of the film was also reduced.

scholarly journals Preparation and characterization of self-cleaning cotton fabric loaded with self-dispersive and reactive biphasic TiO2

2021 ◽  
Author(s):  
Kuang Wang ◽  
Jiayi Chen ◽  
Jialong Tian ◽  
Dawei Gao ◽  
Xiaolei Song ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Cotton Fabrics ◽  
Ammonia Solution ◽  
X Ray ◽  
Washing Fastness ◽  
Fastness Property ◽  
Structure Dispersion ◽  
Ft Ir ◽  
Self Cleaning

Abstract In this article, amino functionalized TiO2 (TiO2/KH550) was obtained in a mild reaction between 3-aminopropyltriethoxysilane and TiO2 with the aid of concentrated ammonia solution. 4-(4,6-dichloro-1,3,5-triazine-2-yl) amino) sodium benzenesulfonate (SAT) was synthesized and characterized by 1H NMR and fourier transform infrared spectroscopy (FT-IR). Self-dispersive and reactive TiO2 (TiO2/KH550/SAT) was prepared by nucleophile substitution reaction between TiO2/KH550 and SAT. Finally, cotton fabrics loaded with different amounts of TiO2/KH550/SAT were achieved by pad-dry-cure method. The chemical structure, dispersion and thermal performance of TiO2, TiO2/KH550 and TiO2/KH550/SAT were investigated by FT-IR, zeta potential and thermogravimetric analysis (TG). The crystalline phase, morphology, chemical composition and optical absorption property of cotton fabrics were studied by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis DRS). Moreover, the anti-ultraviolet, self-cleaning and washing fastness properties of cotton fabrics were investigated. It has been found that TiO2/KH550/SAT demonstrated excellent dispersion stability in aqueous even after standing for a month. Cotton fabrics loaded with TiO2/KH550/SAT possessed adorable anti-ultraviolet performance, highly efficient and durable self-cleaning activity as well as appreciable washing fastness property. The mechanism and possible reactions for the preparation of self-cleaning cotton fabrics loaded with TiO2/KH550/SAT were proposed.

scholarly journals Direct Conjugation of Resveratrol on Hydrophilic Gold Nanoparticles: Structural and Cytotoxic Studies for Biomedical Applications

Nanomaterials ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1898
Author(s):  
Iole Venditti ◽  
Giovanna Iucci ◽  
Ilaria Fratoddi ◽  
Manuela Cipolletti ◽  
Emiliano Montalesi ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Photoelectron Spectroscopy ◽  
X Ray ◽  
Conjugated Systems ◽  
Cell Vitality ◽  
Anticancer Effects ◽  
Radiation Induced ◽  
Ft Ir ◽  
Cytotoxic Studies ◽  
X Ray Absorption

Strongly hydrophilic gold nanoparticles (AuNPs), functionalized with citrate and L-cysteine, were synthetized and used as Resveratrol (RSV) vehicle to improve its bioavailability. Two different conjugation procedures were investigated: the first by adding RSV during AuNPs synthesis (1) and the second by adding RSV after AuNPs synthesis (2). The two different conjugated systems, namely AuNPs@RSV1 and AuNPs@RSV2 respectively, showed good loading efficiency (η%): η1 = 80 ± 5% for AuNPs@RSV1 and η2 = 20 ± 3% for AuNPs@RSV2. Both conjugated systems were investigated by means of Dynamic Light Scattering (DLS), confirming hydrophilic behavior and nanodimension (<2RH> 1 = 45 ± 12 nm and <2RH> 2 = 170 ± 30 nm). Fourier Transform Infrared Spectroscopy (FT-IR), Synchrotron Radiation induced X-Ray Photoelectron Spectroscopy (SR-XPS) and Near Edge X-ray Absorption Fine Structure (NEXAFS) techniques were applied to deeply understand the hooking mode of RSV on AuNPs surface in the two differently conjugated systems. Moreover, the biocompatibility of AuNPs and AuNPs@RSV1 was evaluated in the concentration range 1.0–45.5 µg/mL by assessing their effect on breast cancer cell vitality. The obtained data confirmed that, at the concentration used, AuNPs do not induce cell death, whereas AuNPs@RSV1 maintains the same anticancer effects as the unconjugated RSV.

scholarly journals Hydrogenative Cyclization of Levulinic Acid to γ-Valerolactone with Methanol and Ni-Fe Bimetallic Catalysts

Catalysts ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 1096
Author(s):  
Ligang Luo ◽  
Xiao Han ◽  
Qin Zeng
Keyword(s):  
Photoelectron Spectroscopy ◽  
Levulinic Acid ◽  
Hydrogen Donor ◽  
Effect Of Temperature ◽  
X Ray ◽  
Transmission Electron ◽  
Ft Ir ◽  
Temperature Programmed

A series of Ni-Fe/SBA-15 catalysts was prepared and tested for the catalytic hydrogenation of levulinic acid to γ-valerolactone, adopting methanol as the only hydrogen donor, and investigating the synergism between Fe and Ni, both supported on SBA-15, towards this reaction. The characterization of the synthesized catalysts was carried out by XRD (X-ray powder diffraction), TEM (transmission electron microscopy), H2-TPD (hydrogen temperature-programmed desorption), XPS (X-ray photoelectron spectroscopy), and in situ FT-IR (Fourier transform–infrared spectroscopy) techniques. H2-TPD and XPS results have shown that electron transfer occurs from Fe to Ni, which is helpful both for the activation of the C=O bond and for the dissociative activation of H2 molecules, also in agreement with the results of the in situ FT-IR spectroscopy. The effect of temperature and reaction time on γ-valerolactone production was also investigated, identifying the best reaction conditions at 200 °C and 180 min, allowing for the complete conversion of levulinic acid and the complete selectivity to γ-valerolactone. Moreover, methanol was identified as an efficient hydrogen donor, if used in combination with the Ni-Fe/SBA-15 catalyst. The obtained results are promising, especially if compared with those obtained with the traditional and more expensive molecular hydrogen and noble-based catalysts.

Sign in / Sign up

Export Citation Format

Share Document