scholarly journals Hydrothermal Alteration in the Main Sulfide Zone at Unki Mine, Shurugwi Subchamber of the Great Dyke, Zimbabwe: Evidence from Petrography and Silicates Mineral Chemistry

Minerals ◽  
2017 ◽  
Vol 7 (7) ◽  
pp. 127 ◽  
Author(s):  
Jeff Chaumba
Geosphere ◽  
2020 ◽  
Vol 16 (2) ◽  
pp. 685-710 ◽  
Author(s):  
Jeff B. Chaumba ◽  
Caston T. Musa

Abstract The major platinum group element (PGE) occurrence in the Great Dyke of Zimbabwe, the main sulfide zone, is a tabular stratabound layer hosted in pyroxenites, and it is broadly similar in form throughout the length of the Great Dyke. We conducted a petrographic and sulfide composition study on a sulfide-enriched zone from the contact of the mafic sequence–ultramafic sequence through the main sulfide zone at Unki Mine in the Shurugwi Subchamber to its underlying footwall rocks to place some constraints on the origin of the rocks. Pyrrhotite, pentlandite, chalcopyrite, and pyrite are the base metal sulfides that were encountered during the study. Pyrrhotite, pentlandite, and chalcopyrite typically occurred as inclusions in both primary (orthopyroxene, plagioclase, and clinopyroxene) and secondary (amphibole and chlorite) silicate phases, whereas pyrite was observed in only three samples, where it occurred in association with pyrrhotite. The concentrations of PGEs in the base metal sulfides were nearly all at or below minimum detection limits. The intercumulus nature of some of these sulfides in the investigated sequence suggests that they were likely formed during the crystallization history of these rocks. The occurrence of pyrite, which we interpret to be an alteration phase, suggests that a late-stage event, likely formed during hydrothermal alteration, helped to concentrate the mineralization at Unki Mine. In some cases, however, these sulfides occur partially surrounding some chromite and silicate phases. Thus, some sulfides in the Unki Mine area were likely formed early in the crystallization history of the Great Dyke, whereas others were formed late during hydrothermal processes. Low concentrations of PGEs such as platinum (Pt), palladium (Pd), and rhodium (Rh) in base metal sulfides imply that the PGEs in the main sulfide zone and Unki Mine are hosted either in silicates and/or platinum group minerals. Very low Co contents in pentlandites in the rocks under investigation are interpreted to imply that very limited Fe substitution by Co, and also of Ni by Co, occurred. Broadly comparable trends, with minor variations of Fe in pyrrhotite, of Co and Ni in pentlandite, and of Cu in chalcopyrite, for example, likely reflect magmatic processes. The concentrations of these metals in base metal sulfides vary sympathetically, indicating that their original magmatic signatures were subsequently affected by hydrothermal fluids. The spiked pattern displayed by the variations in the percent modal proportions of the base metal sulfides across the entire investigated stratigraphic section is interpreted to reflect remobilization of the sulfides during hydrothermal alteration. Depletions in some elements, which occur near the base and at the top of the investigated succession, are likely a result of this hydrothermal alteration.


2004 ◽  
Vol 36 (1) ◽  
pp. 492 ◽  
Author(s):  
Π. Βουδούρης ◽  
Κ. Αρίκας ◽  
Α. Κατερινόπουλος

In this study a new occurrence of Pb-rich members of the alunite supergroup minerals is described. The "alunites" were traced in advanced argilic alteration zones of epithermal and porphyry type mineralizations in W. Thrace/(Greece). These "alunites" are Ca-Sr-Ba-Pb-rich phosphatessulfates and represent solid solutions between members of the alunite, woodhouseite and crandallite group minerals. The highest concentrations of PbO in the Mavrokoryfi and Melitaina alunites are 24.7% and 17.4% respectively. The plumbian phosphates-sulfates occur in the cores of the crystals and are surrounded by common K-Na-rich alunites in Mavrokoryfi and Ba-rich woodhouseite in Melitena, an indication that they were formed in a magmatic-hydrothermal environment after dissolution of apatite and feldspars by phosphate-sulphate rich solutions. The mineral-chemistry of these "alunites" can provide information regarding the genesis of the advanced argilic alteration zones in Greece, and help us in the distinction of the epithermal from deep porphyry style environments.


2001 ◽  
Vol 34 (3) ◽  
pp. 1015 ◽  
Author(s):  
Β. ΜΕΛΦΟΣ ◽  
Π. ΒΟΥΔΟΥΡΗΣ ◽  
Κ. ΑΡΙΚΑΣ ◽  
Μ. ΒΑΒΕΛΙΔΗΣ

The present study correlates both the mineralogy of the hydrothermal alteration and the mineral chemistry of molybdenites from three porphyry Mo ± Cu occurrences in Thrace: Melitena, Pagoni Rachi/Kirki and Ktismata/ Maronia. The mineralisations are genetically related to calcalkaline, subvolcanic bodies of Tertiary age. According to their mineralogical and chemical composition the host rocks are characterized as dacite (Melitena), dacitic andésite (Pagoni Rachi) and porphyry microgranite (Ktismata/Maronia). The molybdenites occur in disseminated form, as fracture fillings, as well within quartz stockworks crosscuting the central alteration zones of the intrusives. They are accompanied by the following mineral assemblages: quartz, sericite, pyrophyllite, diaspore, Ca-Ba-rich alunite, pyrite (Melitena); quartz, albite/K-feldspar, biotite, actinolite, magnetite (Pagoni Rachi); and sericite, kaolinite, pyrophyllite, chlorite (Ktismata). Preliminary microthermometric results showed homogenisation temperatures from 352° to 390 °C for Pagoni Rachi area and from 295° to 363 °C for Melitena area. The salinities range between 4.5 and 6.1 wt% eq. NaCl and between 2.7 and 3.4 wt% eq. NaCl, respectively. Detailed study on over 400 fluid inclusions from the porphyry Cu-Mo deposit in Maronia area revealed formation temperatures from 300° to 420 °C, whereas salinities are distincted in two different groups from 6 to 16 wt% eq. NaCl and from 28 to 55 wt% eq. NaCl. The chemical composition of the molybdenites from the three porphyry Mo±Cu deposits in Thrace was studied with 155 microprobe analyses. The results revealed unusual high and variable Re concentrations in the studied molybdenites. Re content in molybdenite from Melitena area vary from 0.21 to 1.74 wt%, 0.79 wt% on average. The highest values were measured in samples from Pagoni Rachi (0.45-4.21 wt%, 1.98 wt% on average). Finally, microprobe analyses from molybdenite in Ktismata/Maronia showed Re content between 0.12 and 2.88 wt% (0.76 wt% on average). Rhenium is a very rare element with many definite uses, and is mainly associated with molybdenite in porphyry type deposits. According to the data published so far the Re content in molybdenite reaches up to 0.42 wt%. It is obvious therefore that such high Re concentrations (0.12 to 4.22 wt%) from the studied molybdenites in Thrace, are very ineresting for a possible future exploitation.


Clay Minerals ◽  
1984 ◽  
Vol 19 (4) ◽  
pp. 579-590 ◽  
Author(s):  
Tj. Peters ◽  
B. Hofmann

AbstractClay minerals of several hydrothermally altered zones in a 1200-m biotite-granite core from a drillhole in northern Switzerland were studied microscopically, by XRD and by electron microprobe. The minerals principally affected by the hydrothermal alteration were plagioclase (An5-An20) and, to a lesser extent, biotite. Illite, regularly interstratified illite-smectite and dioctahedral chlorite-smectite, dioctahedral chlorite, trioctahedral chlorite and kaolinite were detected in the alteration products. Commonly, two or more clay minerals occurred together in pseudomorphs after plagioclase. The mineral chemistry of the clay minerals showed a predominance of the substitution KAl for Si and, to a lesser extent, MgSi for Al. Fluid-inclusion data and the absence of pure smectite and epidote indicated temperatures of ∼200°C for the fluid that caused this alteration.


Sign in / Sign up

Export Citation Format

Share Document