scholarly journals Gold in Paleoproterozoic (2.1 to 1.77 Ga) Continental Magmatic Arcs at the Tapajós and Juruena Mineral Provinces (Amazonian Craton, Brazil): A New Frontier for the Exploration of Epithermal–Porphyry and Related Deposits

Minerals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 714
Author(s):  
Caetano Juliani ◽  
Rafael Rodrigues de Assis ◽  
Lena Virgínia Soares Monteiro ◽  
Carlos Marcello Dias Fernandes ◽  
José Eduardo Zimmermann da Silva Martins ◽  
...  
Keyword(s):  
Gold Mineralization ◽  
Mineral Exploration ◽  
Shear Zones ◽  
Gold Deposits ◽  
Lava Flows ◽  
The South ◽  
Alteration Zones ◽  
New Frontier ◽  
Amazonian Craton ◽  
Low Sulfidation

This review paper aims to integrate geological, tectonic and metallogenetic data, including new data, and propose a regional model for the gold (and base metal) mineralization in the south Amazonian Craton to support the mineral exploration concerning magmatic–hydrothermal deposits. The Proterozoic evolution of the Amazonian Craton comprises the accretion of terrains to the Archean Carajás Mineral Province. In the Tapajós and Juruena mineral provinces, located at the south part of the Amazonian craton, a long-lived ocean–continent subduction event produced ca. 2.0 to 1.77 Ga continental magmatic arcs. Extensive lava flows, volcaniclastic, sedimentary, and plutonic rocks were originated during at least four major orogenic magmatic events (ca. 2.1, 1.9, 1.88, and 1.80 Ga) and two post- to anorogenic events (ca. 1.87 and 1.77 Ga). Gold mineralization occurs in: (i) alluvial/colluvial occurrences, (ii) orogenic carbonate–sulfide-rich quartz veins in shear zones, (iii) stockworks, veins, and dissemination in granites, (iv) contact of basic dikes, (v) well-preserved high-, intermediate- and low-sulfidation epithermal mineralization, and (vi) porphyry-like and intrusion-related gold systems associated with late- to post-orogenic epizonal granites. The estimated historical gold production, mainly in secondary deposits, is over 27 Moz at the Tapajós and 6 Moz at the Juruena provinces. A total resource of over 5 Moz Au is currently defined in several small to large primary gold deposits. Andesite to rhyolite, volcaniclastic, and clastic sedimentary rocks (1.96–1.88 Ga) host epithermal (high-, intermediate-, and low-sulfidation) Au–(Ag–Pb–Zn) mineralization, whereas Au–Cu and Cu–M–Au mineralization is hosted in sub-volcanic tonalitic to granitic plutons. Advanced argillic alteration (alunite, pyrophyllite, enargite) associated with high-sulfidation mineralization occurs in ring volcanoes around nested volcanic calderas. This zone grades outward to propylitic or chlorite alteration, often covered by silica caps with vuggy silica. Lava flows and volcaniclastic rocks within faults or associated with volcanic edifices and rhyolitic domes host low- and intermediate-sulfidation mineralization. Low-sulfidation alteration zones typically have adularia and illite or sericite. Chalcopyrite, sphalerite, galena, pyrite, digenite, and manganiferous calcite are related to intermediate-sulfidation gold mineralization. Late- to post-orogenic evolved oxidized I-type granitoids host alkalic-type epithermal and porphyry-like gold mineralization. Porphyry-style hydrothermal alteration is analogous to those of modern systems, with inner sodic and potassic (potassic feldspar ± biotite or biotite) alterations grading to propylitic, muscovite-sericite, chlorite–sericite, and chlorite alterations. Potassic alteration zones are the locus of Cu–Mo mineralization, and gold-rich zones occur in muscovite/sericite–quartz–pyrite alteration. The Paleoproterozoic epithermal and porphyry-like mineralization in these large provinces defines a new frontier for the exploration of world-class gold deposits in the worldwide Proterozoic arc-related magmatic terrains.

Source requirements for the Golden Mile, Kalgoorlie: significance to the metamorphic replacement model for Archean gold deposits

1987 ◽  
Vol 24 (8) ◽  
pp. 1643-1651 ◽  
Author(s):  
G. Neil Phillips ◽  
David I. Groves ◽  
Isobel J. Brown
Keyword(s):  
Greenstone Belt ◽  
Gold Mineralization ◽  
Source Area ◽  
Shear Zones ◽  
Gold Deposits ◽  
Source Rocks ◽  
Critical Parameters ◽  
Alteration Zones ◽  
Replacement Model ◽  
Golden Mile

The Golden Mile at Kalgoorlie represents a giant Archean hydrothermal gold system localized by ductile shear zones and hosted mainly by a differentiated tholeiitic sill. Chlorite, carbonate, and pyrite alteration zones cover the whole mineralized area (1 km × 3 km), and calculations suggest that for the Golden Mile (production around 1200 t Au), the amounts of components added to these alteration zones are 340 Mt CO2, 20 Mt K, and 5 Mt S. If one adopts a metamorphic-replacement model for gold mineralization in which all ore components derive from devolatilization of greenstones at amphibolite facies or above, these data suggest that a source area involving a 5 km thick greenstone slab of area 8 km × 8 km could produce the necessary CO2, K, S, H2O, and Au. This is considered a reasonable volume of greenstone belt, and under such a model the minimum spacing of large gold deposits would be approximately 20 km along strike.Neither special Au-enriched source rocks nor unreasonably large volumes of greenstone belt are required to produce a giant gold deposit. Instead, the most critical parameters are suitable structural environments providing focussing of fluids and multiple channelways through specific Fe-rich, low-tensile-strength host rocks to ensure efficient depositional mechanisms.

Mafic igneous rocks and mineralisation in the Palaeoproterozoic Ketilidian orogen, South-East Greenland: project SUPRASYD 1996

1997 ◽  
pp. 66-74
Author(s):  
Henrik Stendal ◽  
Wulf Mueller ◽  
Nicolai Birkedal ◽  
Esben I. Hansen ◽  
Claus Østergaard
Keyword(s):  
Mineral Exploration ◽  
Volcanic Rocks ◽  
Shear Zones ◽  
Field Work ◽  
Igneous Rocks ◽  
Border Zone ◽  
The South ◽  
East Greenland ◽  
North West ◽  
Arc Setting

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Stendal, H., Mueller, W., Birkedal, N., Hansen, E. I., & Østergaard, C. (1997). Mafic igneous rocks and mineralisation in the Palaeoproterozoic Ketilidian orogen, South-East Greenland: project SUPRASYD 1996. Geology of Greenland Survey Bulletin, 176, 66-74. https://doi.org/10.34194/ggub.v176.5064 _______________ The multidisciplinary SUPRASYD project (1992–96) focused on a regional investigation of the Palaeoproterozoic Ketilidian orogenic belt which crosses the southern tip of Greenland. Apart from a broad range of geological and structural studies (Nielsen et al., 1993; Garde & Schønwandt, 1994, 1995; Garde et al., 1997), the project included a mineral resource evaluation of the supracrustal sequences associated with the Ketilidian orogen (e.g. Mosher, 1995). The Ketilidian orogen of southern Greenland can be divided from north-west to south-east into: (1) a border zone in which the crystalline rocks of the Archaean craton are unconformably overlain by Ketilidian supracrustal rocks; (2) a major polyphase pluton, referred to as the Julianehåb batholith; and (3) extensive areas of Ketilidian supracrustal rocks, divided into psammitic and pelitic rocks with subordinate interstratified mafic volcanic rocks (Fig. 1). The Julianehåb batholith is viewed as emplaced in a magmatic arc setting; the supracrustal sequences south of the batholith have been interpreted as either (1) deposited in an intra-arc and fore-arc basin (Chadwick & Garde, 1996), or (2) deposited in a back-arc or intra-arc setting (Stendal & Swager, 1995; Swager, 1995). Both possibilities are plausible and infer subduction-related processes. Regional compilations of geological, geochemical and geophysical data for southern Greenland have been presented by Thorning et al. (1994). Mosher (1995) has recently reviewed the mineral exploration potential of the region. The commercial company Nunaoil A/S has been engaged in gold prospecting in South Greenland since 1990 (e.g. Gowen et al., 1993). A principal goal of the SUPRASYD project was to test the mineral potential of the Ketilidian supracrustal sequences and define the gold potential in the shear zones in the Julianehåb batholith. Previous work has substantiated a gold potential in amphibolitic rocks in the south-west coastal areas (Gowen et al., 1993.), and in the amphibolitic rocks of the Kutseq area (Swager et al., 1995). Field work in 1996 was focused on prospective gold-bearing sites in mafic rocks in South-East Greenland. Three M.Sc. students mapped showings under the supervision of the H. S., while an area on the south side of Kangerluluk fjord was mapped by H. S. and W. M. (Fig. 4).

Gold-bismuth-telluride-sulphide assemblages at the Viceroy Mine, Harare-Bindura-Shamva greenstone belt, Zimbabwe

2008 ◽  
Vol 72 (4) ◽  
pp. 953-970 ◽  
Author(s):  
T. Oberthür ◽  
T. W. Weiser
Keyword(s):  
Native Gold ◽  
Gold Mineralization ◽  
Close Association ◽  
Shear Zones ◽  
Gold Deposits ◽  
Orogenic Gold ◽  
Main Stage ◽  
Melting Temperatures ◽  
Native Bismuth ◽  
Gold Bearing

AbstractGold mineralization at the Viceroy Mine is hosted in extensional veins in steep shear zones that transect metabasalts of the Archaean Arcturus Formation. The gold mineralization is generally made up of banded or massive quartz carrying abundant coarse arsenopyrite. However, most striking is a distinct suite of Au-Bi-Te-S minerals, namely joseite-A (Bi4TeS2), joseite-B (Bi4Te2S), hedleyite (Bi7Te3), ikunolite (Bi4S3), ‘protojoseite’ (Bi3TeS), an unnamed mineral (Bi6Te2S), bismuthinite (Bi2S3), native Bi, native gold, maldonite (Au2Bi), and jonassonite (AuBi5S4). The majority of the Bi-Te-S phases is characterized by Bi/(Se+Te) ratios of >1. Accordingly, this assemblage formed at reduced conditions at relatively low fS2 and fTe2. Fluid-inclusion thermometry indicates depositional temperatures of the main stage of mineralization of up to 342°C, in the normal range of mesothermal, orogenic gold deposits worldwide. However, melting temperatures of Au-Bi-Te phases down to at least 235°C (assemblage (Au2Bi + Bi + Bi7Te3)) imply that the Au-Bi-Te phases have been present as liquids or melt droplets. Furthermore, the close association of native gold, native bismuth and other Bi-Te-S phases suggests that gold was scavenged from the hydrothermal fluids by Bi-Te-S liquids or melts. It is concluded that a liquid/melt-collecting mechanism was probably active at Viceroy Mine, where the distinct Au-Bi-Te-S assemblage either formed late as part of the main, arsenopyrite-dominated mineralization, or it represents a different mineralization event, related to rejuvenation of the shear system. In either case, some of the gold may have been extracted from pre-existing, gold-bearing arsenopyrite by Bi-Te-S melts, thus leading to an upgrade of the gold ores at Viceroy. The Au-Bi-Te-S assemblage represents an epithermal-style mineralization overprinted on an otherwise mesothermal (orogenic) gold mineralization.

Gold distribution in the Val-d'Or Formation and a model for the formation of the Lamaque–Sigma mines, Val-d'Or, Quebec

1991 ◽  
Vol 28 (5) ◽  
pp. 706-720 ◽  
Author(s):  
Mehmet F. Taner ◽  
Pierre Trudel
Keyword(s):  
Gold Mineralization ◽  
Regional Metamorphism ◽  
Analytical Techniques ◽  
Shear Zones ◽  
Gold Deposits ◽  
Mining District ◽  
Volcanic Complex ◽  
Geothermal Systems ◽  
Gold Mines ◽  
Geothermal Activity

Recent lithogeochemical studies by accurate analytical techniques (e.g., instrumental and radiochemical neutron-activation analyses) have been used to explore the possibility of using gold distribution in the research for new gold deposits; these show that anomalous gold distribution occurs in some parts of the Val-d'Or Formation in the Val-d'Or mining district of Quebec. Gold lithogeochemistry in the Val-d'Or Formation has shown that it is possible to distinguish: (i) background values (1.4–3.5 ppb Au); (ii) zones of primarily anomalous gold values around the Lamaque–Sigma mines (median: 15 ppb Au); (iii) enrichment halos around gold orebodies (median: 70 ppb Au); and (iv) secondary gold enrichment in shear zones. We conclude that the Val-d'Or Formation is auriferous, i.e., anomalously rich in gold at least in some of its parts and contains the Lamaque – Sigma gold mines, representing 68% of the total gold production in the district. The Val-d'Or Formation is part of a central volcanic complex within an island-arc system. The centre of this complex is located in the main Lamaque plug, and this environment may be compared to high-temperature active geothermal systems that are commonly responsible for the formation of epithermal gold deposits. Gold mineralization at Sigma and Lamaque is considered to be related to a late hydrothermal phase or a retrograde phase of regional metamorphism. For the formation of the gold deposits, two distinct and successive events are postulated: (i) a gold-rich synvolcanic geothermal activity and (ii) a late remobilisation from the host rocks followed by deposition of gold ore within favourable structures.

scholarly journals STRUCTURAL, STRATIGRAPHIC AND METALLOGENETIC ASPECTS OF THE PARAGUAY FOLD AND THRUST BELT: IMPLICATIONS FOR GOLD MINERALIZATION AND COLLAGE OF THE GONDWANA

2020 ◽  
Vol 39 (2) ◽  
pp. 279-296
Author(s):  
Elzio da Silva BARBOZA ◽  
Mauro Cesar GERALDES ◽  
Francisco Egídio Cavalcante PINHO ◽  
Carlos José FERNANDES ◽  
Carlos Humberto da SILVA
Keyword(s):  
Gold Mineralization ◽  
Gold Deposits ◽  
Terrigenous Sediments ◽  
Quartz Veins ◽  
Fold And Thrust Belt ◽  
Cap Carbonates ◽  
External Domain ◽  
Amazonian Craton ◽  
Eastern Border ◽  
Type 3

ABSTRACT - Paraguay Belt occupies the western portion of the Tocantins Province, surrounding the Southeast of the Amazonian Craton and the eastern border of the Rio Apa Block, suggesting continuity with Tucavaca Belt in Bolivia. The rocks of the Paraguay belt were initially deposited in a glaciomarine environment in sites proximal to the cratonic area and deeper marine under the influence of turbidite flows in distal sites (Cuiabá Group, Bauxi and Puga Formation). The cap carbonates, thick limestone and dolostone succession of the Araras Group and siltstones and diamictites of the Serra Azul Formation related to Glaskiers glaciation overlay these diamictites (related to Marinoan glaciation). On the top there are terrigenous sediments of the Alto Paraguay Group, represented by sandstones of Raizama and claystones of Diamantino formations, respectively. The belt can be divided into three distinct structural zones: The Internal Domain is comprised of turbidite and glaciogenic sequences. Glaciogenic rocks on the base and carbonaceous and terrigenous sediments on the top occur in the External Domain. Horizontal platformal cover on the Amazonian Craton rocks are characterized by open folds. Structural studies allowed characterization of continuous deformational phases: the main deformational phase generated regional inverse folds with a NE-SW trend and fan geometry. Several regionally widespread lode-type gold deposits related to four types of the quartz veins were identified: type 1 is in concordance to bedding, type 2 is parallel to Sn, type 3 is parallel to Sn+2, and vertical Type 4 (Au-rich) is orthogonal to Sn. Late deformation developed in the Cuiabá region, recorded the closure of the ocean and the invertion where the hydrothermal fluids are the responsible for the orebodies formation. Keywords: Paraguay Belt, Structural, Stratigraphy, Metalogenesis.

Gold Deposits of the ~15-Moz Ahafo South Camp, Sefwi Granite-Greenstone Belt, Ghana: Insights into the Anatomy of an Orogenic Gold Plumbing System

2021 ◽  
Author(s):  
Quentin Masurel ◽  
Paul Morley ◽  
Nicolas Thébaud ◽  
Helen McFarlane
Keyword(s):  
Rock Mass ◽  
Shear Zone ◽  
Gold Mineralization ◽  
Hanging Wall ◽  
Spatial Association ◽  
Sedimentary Rocks ◽  
Shear Zones ◽  
Gold Deposits ◽  
Orogenic Gold ◽  
Plutonic Rocks

Abstract The ~15-Moz Ahafo South gold camp is located in southwest Ghana, the world’s premier Paleoproterozoic gold subprovince. Major orogenic gold deposits in the camp include Subika, Apensu, Awonsu, and Amoma. These deposits occur along an ~15-km strike length of the Kenyase-Yamfo shear zone, a major tectonostratigraphic boundary juxtaposing metamorphosed volcano-plutonic rocks of the Sefwi belt against metamorphosed volcano-sedimentary rocks of the Sunyani-Comoé basin. In this study, we document the geologic setting, structural geometry, and rheological architecture of the Ahafo South gold deposits based on the integration of field mapping, diamond drill core logging, 3-D geologic modeling, and the geologic interpretation of aeromagnetic data. At the camp scale, the Awonsu, Apensu, and Amoma deposits lie along strike from one another and share similar hanging-wall plutonic rocks and footwall volcano-sedimentary rocks. In contrast, the Subika gold deposit is hosted entirely in hanging-wall plutonic rocks. Steeper-dipping segments (e.g., Apensu, Awonsu, Subika) and right-hand flexures (e.g., Amoma, Apensu) in the Kenyase-Yamfo shear zone and subsidiary structures appear to have represented sites of enhanced damage and fluid flux (i.e., restraining bends). All gold deposits occur within structural domains bounded by discontinuous, low-displacement, sinistral N-striking tear faults oblique to the orogen-parallel Kenyase-Yamfo shear zone. At the deposit scale, ore-related hydrothermal alteration is zoned, with distal chlorite-sericite grading into proximal silica-albite-Fe-carbonate mineral assemblages. Alteration halos are restricted to narrow selvages around quartz-carbonate vein arrays in multiple stacked ore shoots at Subika, whereas these halos extend 30 to 100 m away from the ore zones at Apensu and Awonsu. There is a clear spatial association between shallow-dipping mafic dikes, mafic chonoliths, shear zones, and economic gold mineralization. The abundance of mafic dikes and chonoliths within intermediate to felsic hanging-wall plutonic host rocks provided rheological heterogeneity that favored the formation of enhanced fracture permeability, promoting the tapping of ore fluid(s). Our interpretation is that these stacked shallow-dipping mafic dike arrays also acted as aquitards, impeding upward fluid flow within the wider intrusive rock mass until a failure threshold was episodically reached due to fluid overpressure, resulting in transient fracture-controlled upward propagation of the ore-fluid(s). Our results indicate that high-grade ore shoots at Ahafo South form part of vertically extensive fluid conduit systems that are primarily controlled by the rheological architecture of the rock mass.

scholarly journals The geological and structural controls of gold mineralization in Qala en Nahal-Um Sagata region, South Gedarif, Sudan

2020 ◽  
Vol 59 (3) ◽  
pp. 19-26
Author(s):  
Musab Awad Ahmed HASSAN ◽  
◽  
Aleksandr Evgen’yevich KOTEL’NIKOV ◽  
Keyword(s):  
Gold Mineralization ◽  
Mineral Exploration ◽  
Structural Evolution ◽  
Absorption Spectrometry ◽  
Shear Zones ◽  
Structural Features ◽  
Geological Structure ◽  
Geological Mapping ◽  
Quartz Veins ◽  
Ophiolitic Complex

Relevance and purpose of the work. The study area is located in Gedarif state in Sudan. The ongoing work is aimed at solving fundamental problems of the geological structure of the Qala En Nahal-Um Saqata Ophiolitic Complex and applied tasks of mineral exploration. Detailed studies are being conducted for the first time in this area. The purpose of the investigation is to study the geological and structural features of the region, as well as to obtain information about the localization of gold mineralization. Methods of research. Within the study area, a geological mapping of the ophiolitic complex was carried out. It’s included an analysis of structural elements for investigation of the structural evolution and the phases of deformation. Chemical analysis of the mineralized quartz veins to determine the gold was carried out by Atomic Absorption Spectrometry (AAS) technique at the ALS Laboratory in Saudi Arabia. Results of the work. The investigation of the structural evolution revealed at least three phases of deformation. The gold mineralization occurs in auriferous quartz veins, which are hosted in metavocano-sedimentary, sheared synorogenic granites and listvenites. The auriferous quartz veins are structurally controlled by dominantly NE main shear directions. Conclusions. The gold mineralization in the area can be classified shear zone related mineralization, which is formed during the final event accomplished by crustal cooling, and formation of auriferous quartz vein along shear zones. Gold concentration were recorded in both quartz veins and associates alteration rocks. The area is promising for the presence of a gold deposit.

scholarly journals Virtual Structural Analysis of Jokisivu Open Pit Using ‘Structure-from-Motion’ Unmanned Aerial Vehicles (UAV) Photogrammetry: Implications for Structurally-Controlled Gold Deposits in Southwest Finland

2018 ◽  
Vol 10 (8) ◽  
pp. 1296 ◽  
Author(s):  
Mohammad Sayab ◽  
Domingo Aerden ◽  
Markku Paananen ◽  
Petri Saarela
Keyword(s):  
High Resolution ◽  
Unmanned Aerial Vehicles ◽  
Gold Mineralization ◽  
Regional Scale ◽  
Shear Zones ◽  
Gold Deposits ◽  
Open Pit ◽  
Conjugate System ◽  
Aerial Vehicles ◽  
D Model

Unmanned aerial vehicles (UAVs) are rapidly growing remote sensing platforms for capturing high-resolution images of exposed rock surfaces. We used a DJI Phantom 3 Professional (P3P) quadcopter to capture aerial images that were used to generate a high-resolution three-dimensional (3-D) model of the Jokisivu open-pit gold deposit that is located in southwestern Finland. 158 overlapping oblique and nadir images were taken and processed with Agisoft Photoscan Pro to generate textured 3-D surface models. In addition, 69 overlapping images were taken from the steep faces of the open pit. We assessed the precision of the 3-D model by deploying ground control points (GCPs) and the average errors were found minimal along X (2.0 cm), Y (1.2 cm), and Z (5.0 cm) axes. The steep faces of the open pit were used for virtual structural measurements and kinematic analyses in CloudCompare and ArcGIS to distinguish the orientation of different fracture sets and statistical categorization, respectively. Three distinct fracture sets were observed. The NW-SE and NE-SW striking fractures form a conjugate geometry, whereas the NNW-SSE striking fractures cut the conjugate fracture set. The orientation of conjugate fractures match well with the resource model of the deposit and NW- and NE-trending segments of regional-scale anastomosing shear zones. Based on the conjugate geometry of fracture sets I and II, and the regional pattern of anastomosing shear system lead us to interpret an origin of gold mineralization in two stages. An early N-S or NNW-SSE crustal shortening, corresponding to the regional D4 (ca. 1.83–1.81 Ga) or pre-D4 (ca. 1.87–1.86 Ga) Svecofennian tectonic event(s) that produced anastomosing shear zones. Subsequent E-W directed D5 contraction (ca. 1.79–1.77 Ga) partly reactivated the anastomosing shear zones with the formation of conjugate system, which controlled the migration of fluids and gold mineralization in SW Finland.

Structural control of gold mineralization at the Bousquet mine, Abitibi, Quebec

1989 ◽  
Vol 26 (1) ◽  
pp. 157-175 ◽  
Author(s):  
Ghislain Tourigny ◽  
Claude Hubert ◽  
Alex C. Brown ◽  
Robert Crépeau
Keyword(s):  
Deformation Zone ◽  
Structural Control ◽  
Gold Mineralization ◽  
Shear Zones ◽  
Hydrothermal Activity ◽  
Gold Deposits ◽  
Ductile Deformation ◽  
Tectonic Deformation ◽  
Progressive Deformation ◽  
Initial Development

The Bousquet gold deposits are structurally controlled, disseminated and vein type lodes located within a 500 m wide anastomosing deformation zone. Ore is located within narrow zones of high strain surrounded by lozenge-shaped panels of less-deformed rock. Strain characteristics are those of the bulk inhomogeneous flattening style. Ore lenses are spatially related to highly sheared, fractured, and altered mafic and felsic volcanic and volcaniclastic rocks of contrasting rheologic properties. Deformation features can be ascribed to multistage progressive ductile → brittle deformation. Strain markers and kinematic indicators show that the principal displacement within the deformation zone was reverse faulting with a minor sinistral throw. A structural analysis demonstrates that the deformation responsible for the development of a pervasive regional foliation, brittle fractures, and oblique reverse faults can be attributed to a north–south compression.Metamorphic minerals such as andalusite, kyanite, garnet, biotite, chlorite, chloritoid, and calcic plagioclases indicate that upper greenschist metamorphism was attained locally within the ductile deformation zones. Subsequent pervasive retrograde alteration, including carbonatization and hydration of silicates to white mica and chlorite, suggests an important period of hydrothermal activity after peak metamorphism. Native gold is typically closely associated with pyrite and with these hydrothermal assemblages and was probably channelled into ductile and brittle structural zones prior to and after peak metamorphism.Two principal types of steeply dipping auriferous sulphide veins are present in the mine: foliation-oblique veins and foliation-parallel veins. Foliation-oblique veins occur within steeply dipping conjugate shear fractures spatially related to competent protoliths. The main set was emplaced during late stages of the regional tectonic deformation, after the initial development of a pervasive regional foliation and before the end of the progressive deformation. Foliation-parallel veins are located within openings created by decoupling schistosity laminae or by overriding of irregular surfaces such as fault planes and shear zones. These veins are relatively younger and less deformed than the foliation-oblique veins.Pervasive pyritic disseminations along foliation surfaces are earliest and synchronous with the development of foliation and probably continued throughout the progressive deformation. Early disseminated sulphides may also have been remobilized by pressure solution into later vein systems.

Sign in / Sign up

Export Citation Format

Share Document