scholarly journals Geological Mapping Using Drone-Based Photogrammetry: An Application for Exploration of Vein-Type Cu Mineralization

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 585
Author(s):  
Mehdi Honarmand ◽  
Hadi Shahriari
Keyword(s):  
Mineral Exploration ◽  
Low Cost ◽  
Field Work ◽  
Geological Mapping ◽  
Visual Interpretation ◽  
Geological Structures ◽  
Ground Control Points ◽  
Digital Elevation ◽  
Vein Type ◽  
Elevation Model

In this research, drone-based photogrammetry was utilized for mapping geology with the objective of mineral exploration in the Shahzadeh Abbas Cu deposit, Kerman province, Iran. Cu mineralization is of vein-type and follows geological structures. A low-cost drone was used to collect geological data. A spatial resolution of 3.26 cm was achieved by considering a flight altitude of 70 m. To reach the accuracy of less than 5 cm, 70% lateral and 80% front image overlaps were applied and 220 temporary ground control points (TGCPs) were used in an area of 2.02 km2. TGCPs were accurately positioned using DGPS-RTK measurements. Agisoft PhotoScan software was used for photogrammetric processing. The orthophoto product was performed for outlining geological units through visual interpretation. The digital elevation model (DEM) was converted to a hill-shade model in ArcGIS software to extract the geological structures such as faults and dikes. A draft geology map was prepared using orthophoto and hill-shade images to minimize the time and cost of the subsequent field work. Rock sampling was carried out and Cu-bearing veins were specified through field investigations. The geology map was finalized based on field work data and petrology studies. The geological survey indicated that diabase dikes with a northwest–southeast strike often host Cu mineralization in the study area. The position of Cu-bearing dikes was delineated for the next stage of the exploration program. This research demonstrated the time- and cost-effectiveness of using drone-based photogrammetry for preparing base geology maps for the exploration of vein-type mineralization in far districts with rough topography.

scholarly journals Volkanostratigrafi Inderaan Jauh Kompleks Gunungapi Gede dan Sekitarnya, Jawa Barat, Indonesia

2019 ◽  
Vol 20 (1) ◽  
pp. 9
Author(s):  
Fitriani Agustin ◽  
Sutikno Bronto
Keyword(s):  
Remote Sensing ◽  
Geological Mapping ◽  
Lava Flows ◽  
Energy Resources ◽  
Visual Interpretation ◽  
Remote Sensing Technology ◽  
Sensing Technology ◽  
Digital Elevation ◽  
History Of ◽  
Elevation Model

Remote sensing technology greatly helps to identify the various of volcano features, including active, old and ancient volcanoes. The aim of this  paper is intended to introduce various volcanic features in the Gede Volcano Complexs (GVC) and souronding area; compose volcanostratigraphy; and estimate the history of the volcanoes. The method used is a visual interpretation 9 meters spatial resolution of Digital Elevation Model (DEM) TerraSar-x image. Indonesian Stratigraphy Nomenclature Guide 1996 was implemented in vocanostratigraphy unit classification, involving Arc, Super Brigate, Brigate, Crown and Hummockly. Based on the interpretation the DEM image, volcanostratigraphic unit the Gede Volcano Complex consists of Bregade Masigit (Br. M.), which consists of Joklok (Gm.J.) and Gegerbentang (Gm.G.) Hummocs; Crown Lingkung (Kh.L.) consisting of Pangrango (Gm.P.), Situ Gunung (Gm Sg.), Cikahuripan (Gm.Ck.), Pasir Prahu (Gm.Ph) Hummocs; Gege Crown (Kh.G.), which is located in the east of Lingkung Crown. The Gede Crown consists of Gumuruh humock (Gm.Gh.), Gunung Gede lava flows (LG 1,2,3,4,5), and giant debrise avalances (gv-G). The geological mapping based volcanostratigraphy is very useful for exploration of mineral and energy resources, as well as geological hazards.Keywords : volcanostratigraphy, DEM TerraSar-x image, Gunung Gede Complexs.

scholarly journals Suggestions to Limit Geometric Distortions in the Reconstruction of Linear Coastal Landforms by SfM Photogrammetry with PhotoScan® and MicMac® for UAV Surveys with Restricted GCPs Pattern

Drones ◽  
2018 ◽  
Vol 3 (1) ◽  
pp. 2 ◽  
Author(s):  
Marion Jaud ◽  
Sophie Passot ◽  
Pascal Allemand ◽  
Nicolas Le Dantec ◽  
Philippe Grandjean ◽  
...  
Keyword(s):  
Low Cost ◽  
Software Tool ◽  
Rapid Acquisition ◽  
Geometric Distortions ◽  
Ground Control Points ◽  
Digital Elevation ◽  
Coastal Landforms ◽  
Elevation Model ◽  
Camera Distortion

Owing to the combination of technological progress in Unmanned Aerial Vehicles (UAVs) and recent advances in photogrammetry processing with the development of the Structure-from-Motion (SfM) approach, UAV photogrammetry enables the rapid acquisition of high resolution topographic data at low cost. This method is particularly widely used for geomorphological surveys of linear coastal landforms. However, linear surveys are generally pointed out as problematic cases because of geometric distortions creating a “bowl effect” in the computed Digital Elevation Model (DEM). Secondly, the survey of linear coastal landforms is associated with peculiar constraints for Ground Control Points (GCPs) measurements and for the spatial distribution of the tie points. This article aims to assess the extent of the bowl effects affecting the DEM generated above a linear beach with a restricted distribution of GCPs, using different acquisition scenarios and different processing procedures, both with PhotoScan® software tool and MicMac® software tool. It appears that, with a poor distribution of the GCPs, a flight scenario that favors viewing angles diversity can limit DEM’s bowl effect. Moreover, the quality of the resulting DEM also depends on the good match between the flight plan strategy and the software tool via the choice of a relevant camera distortion model.

scholarly journals PHOTOGRAMMETRIC MAPPING BASED ON UAV IMAGERY

2013 ◽  
Vol 39 (4) ◽  
pp. 158-163 ◽  
Author(s):  
Tautvydas Berteška ◽  
Birutė Ruzgienė
Keyword(s):  
Low Cost ◽  
Digital Camera ◽  
Experimental Investigations ◽  
Digital Photogrammetry ◽  
Software Application ◽  
Ground Control Points ◽  
Standard Mapping ◽  
Digital Elevation ◽  
Mapping Technology ◽  
Elevation Model

Unmanned Aerial Vehicle (UAV) and Digital Photogrammetry is an up-to-date area mapping technology. Implemented features are low-cost, mobile and simple. UAV (fixed-wing EPP-FPV) with mounted digital camera (Canon S100) was used for imagery while digital photogrammetry processing (with lisa software application) was applied for cartographic data collection. High imagery quality is a significant factor for the efficiency and quality of standard mapping products, such as Digital Elevation Model and Ortho Images. DEM and Orthophoto quality mainly depends on camera resolution, flight height and accuracy of Ground Control Points (GCP). In experimental investigations, GCP coordinates were gained interactively from the Internet. Application of the appropriate DEM checking technique showed that DEM error was up to 0.5 m.

scholarly journals Volkanostratigrafi Inderaan Jauh Kompleks Gunungapi Gede dan Sekitarnya, Jawa Barat, Indonesia

2019 ◽  
Vol 20 (1) ◽  
pp. 9
Author(s):  
Fitriani Agustin ◽  
Sutikno Bronto
Keyword(s):  
Remote Sensing ◽  
Geological Mapping ◽  
Lava Flows ◽  
Energy Resources ◽  
Visual Interpretation ◽  
Remote Sensing Technology ◽  
Sensing Technology ◽  
Digital Elevation ◽  
History Of ◽  
Elevation Model

Remote sensing technology greatly helps to identify the various of volcano features, including active, old and ancient volcanoes. The aim of this  paper is intended to introduce various volcanic features in the Gede Volcano Complexs (GVC) and souronding area; compose volcanostratigraphy; and estimate the history of the volcanoes. The method used is a visual interpretation 9 meters spatial resolution of Digital Elevation Model (DEM) TerraSar-x image. Indonesian Stratigraphy Nomenclature Guide 1996 was implemented in vocanostratigraphy unit classification, involving Arc, Super Brigate, Brigate, Crown and Hummockly. Based on the interpretation the DEM image, volcanostratigraphic unit the Gede Volcano Complex consists of Bregade Masigit (Br. M.), which consists of Joklok (Gm.J.) and Gegerbentang (Gm.G.) Hummocs; Crown Lingkung (Kh.L.) consisting of Pangrango (Gm.P.), Situ Gunung (Gm Sg.), Cikahuripan (Gm.Ck.), Pasir Prahu (Gm.Ph) Hummocs; Gege Crown (Kh.G.), which is located in the east of Lingkung Crown. The Gede Crown consists of Gumuruh humock (Gm.Gh.), Gunung Gede lava flows (LG 1,2,3,4,5), and giant debrise avalances (gv-G). The geological mapping based volcanostratigraphy is very useful for exploration of mineral and energy resources, as well as geological hazards.Keywords : volcanostratigraphy, DEM TerraSar-x image, Gunung Gede Complexs.DOI: 10.33332/jgsm.2019.v20.1.9-16

scholarly journals Volkanostratigrafi Inderaan Jauh Kompleks Gunungapi Gede dan Sekitarnya, Jawa Barat, Indonesia

2019 ◽  
Vol 20 (1) ◽  
pp. 9
Author(s):  
Fitriani Agustin ◽  
Sutikno Bronto
Keyword(s):  
Remote Sensing ◽  
Geological Mapping ◽  
Lava Flows ◽  
Energy Resources ◽  
Visual Interpretation ◽  
Remote Sensing Technology ◽  
Sensing Technology ◽  
Digital Elevation ◽  
History Of ◽  
Elevation Model

Remote sensing technology greatly helps to identify the various of volcano features, including active, old and ancient volcanoes. The aim of this  paper is intended to introduce various volcanic features in the Gede Volcano Complexs (GVC) and souronding area; compose volcanostratigraphy; and estimate the history of the volcanoes. The method used is a visual interpretation 9 meters spatial resolution of Digital Elevation Model (DEM) TerraSar-x image. Indonesian Stratigraphy Nomenclature Guide 1996 was implemented in vocanostratigraphy unit classification, involving Arc, Super Brigate, Brigate, Crown and Hummockly. Based on the interpretation the DEM image, volcanostratigraphic unit the Gede Volcano Complex consists of Bregade Masigit (Br. M.), which consists of Joklok (Gm.J.) and Gegerbentang (Gm.G.) Hummocs; Crown Lingkung (Kh.L.) consisting of Pangrango (Gm.P.), Situ Gunung (Gm Sg.), Cikahuripan (Gm.Ck.), Pasir Prahu (Gm.Ph) Hummocs; Gege Crown (Kh.G.), which is located in the east of Lingkung Crown. The Gede Crown consists of Gumuruh humock (Gm.Gh.), Gunung Gede lava flows (LG 1,2,3,4,5), and giant debrise avalances (gv-G). The geological mapping based volcanostratigraphy is very useful for exploration of mineral and energy resources, as well as geological hazards.Keywords : volcanostratigraphy, DEM TerraSar-x image, Gunung Gede Complexs.DOI: 10.33332/jgsm.2019.v20.1.9-16

scholarly journals Volkanostratigrafi Inderaan Jauh Kompleks Gunungapi Gede dan Sekitarnya, Jawa Barat, Indonesia

2019 ◽  
Vol 20 (1) ◽  
pp. 9
Author(s):  
Fitriani Agustin ◽  
Sutikno Bronto
Keyword(s):  
Remote Sensing ◽  
Geological Mapping ◽  
Lava Flows ◽  
Energy Resources ◽  
Visual Interpretation ◽  
Remote Sensing Technology ◽  
Sensing Technology ◽  
Digital Elevation ◽  
History Of ◽  
Elevation Model

Remote sensing technology greatly helps to identify the various of volcano features, including active, old and ancient volcanoes. The aim of this  paper is intended to introduce various volcanic features in the Gede Volcano Complexs (GVC) and souronding area; compose volcanostratigraphy; and estimate the history of the volcanoes. The method used is a visual interpretation 9 meters spatial resolution of Digital Elevation Model (DEM) TerraSar-x image. Indonesian Stratigraphy Nomenclature Guide 1996 was implemented in vocanostratigraphy unit classification, involving Arc, Super Brigate, Brigate, Crown and Hummockly. Based on the interpretation the DEM image, volcanostratigraphic unit the Gede Volcano Complex consists of Bregade Masigit (Br. M.), which consists of Joklok (Gm.J.) and Gegerbentang (Gm.G.) Hummocs; Crown Lingkung (Kh.L.) consisting of Pangrango (Gm.P.), Situ Gunung (Gm Sg.), Cikahuripan (Gm.Ck.), Pasir Prahu (Gm.Ph) Hummocs; Gege Crown (Kh.G.), which is located in the east of Lingkung Crown. The Gede Crown consists of Gumuruh humock (Gm.Gh.), Gunung Gede lava flows (LG 1,2,3,4,5), and giant debrise avalances (gv-G). The geological mapping based volcanostratigraphy is very useful for exploration of mineral and energy resources, as well as geological hazards.Keywords : volcanostratigraphy, DEM TerraSar-x image, Gunung Gede Complexs.

scholarly journals Flood vulnerability assessment in the Accra Metropolis, southeastern Ghana

2021 ◽  
Vol 11 (7) ◽  
Author(s):  
Benjamin Wullobayi Dekongmen ◽  
Amos Tiereyangn Kabo-bah ◽  
Martin Kyereh Domfeh ◽  
Emmanuel Daanoba Sunkari ◽  
Yihun Taddele Dile ◽  
...  
Keyword(s):  
Drainage Density ◽  
Geological Structures ◽  
Flood Vulnerability ◽  
Rock Types ◽  
Digital Elevation ◽  
Annual Population ◽  
Density Values ◽  
High Runoff ◽  
Elevation Model ◽  
Very High

AbstractFloods in Ghana have become a perennial challenge in the major cities and communities located in low-lying areas. Therefore, cities and communities located in these areas have been classified as potential or natural flood-prone zones. In this study, the Digital Elevation Model (DEM) of the Accra Metropolis was used to assess the drainage density and elevation patterns of the area. The annual population estimation data and flood damages were assessed to understand the damages and population trend. This research focused primarily on the elevation patterns, slope patterns, and drainage density of the Accra Metropolis. Very high drainage density values, which range between 149 and 1117 m/m2, showed very high runoff converging areas. High drainage density was also found to be in the range of 1117–1702 m/m2, which defined the area as a high runoff converging point. The medium and low converging points of runoff were also found to be ranging between 1702–2563 m/m2 and 2563–4070 m/m2, respectively. About 32% of the study area is covered by natural flood-prone zones, whereas flood-prone zones also covered 33% and frequent flood zones represent 25%. Areas in the Accra Metropolis that fall in the Accraian and Togo series rock types experience high floods. However, the lineament networks (geological structures) that dominate the Dahomeyan series imply that the geological structures in the Dahomeyan series also channel the runoffs into the low-lying areas, thereby contributing to the perennial flooding in the Accra Metropolis.

scholarly journals Accuracy of 3D Landscape Reconstruction without Ground Control Points Using Different UAS Platforms

Drones ◽  
2020 ◽  
Vol 4 (2) ◽  
pp. 13 ◽  
Author(s):  
Margaret Kalacska ◽  
Oliver Lucanus ◽  
J. Pablo Arroyo-Mora ◽  
Étienne Laliberté ◽  
Kathryn Elmer ◽  
...  
Keyword(s):  
Low Cost ◽  
Ground Control ◽  
Unmanned Aerial Systems ◽  
Control Points ◽  
Model Errors ◽  
Positional Accuracy ◽  
Ground Control Points ◽  
Digital Elevation ◽  
High Level ◽  
Aerial Systems

The rapid increase of low-cost consumer-grade to enterprise-level unmanned aerial systems (UASs) has resulted in the exponential use of these systems in many applications. Structure from motion with multiview stereo (SfM-MVS) photogrammetry is now the baseline for the development of orthoimages and 3D surfaces (e.g., digital elevation models). The horizontal and vertical positional accuracies (x, y and z) of these products in general, rely heavily on the use of ground control points (GCPs). However, for many applications, the use of GCPs is not possible. Here we tested 14 UASs to assess the positional and within-model accuracy of SfM-MVS reconstructions of low-relief landscapes without GCPs ranging from consumer to enterprise-grade vertical takeoff and landing (VTOL) platforms. We found that high positional accuracy is not necessarily related to the platform cost or grade, rather the most important aspect is the use of post-processing kinetic (PPK) or real-time kinetic (RTK) solutions for geotagging the photographs. SfM-MVS products generated from UAS with onboard geotagging, regardless of grade, results in greater positional accuracies and lower within-model errors. We conclude that where repeatability and adherence to a high level of accuracy are needed, only RTK and PPK systems should be used without GCPs.

scholarly journals Influência de lineamentos estruturais no desencadeamento dos movimentos de massa no maciço de Uruburetama, Ceará

2020 ◽  
Vol 13 (3) ◽  
pp. 1294
Author(s):  
Eduardo Viana Freires ◽  
Cláudio Ângelo da Silva Neto ◽  
Cynthia Romariz Duarte ◽  
César Ulisses Vieira Veríssimo ◽  
Daniel Dantas Moreira Gomes ◽  
...  
Keyword(s):  
High Energy ◽  
Automatic Extraction ◽  
Mass Movements ◽  
Alos Palsar ◽  
Geological Structures ◽  
Physical Conditions ◽  
Directional Filters ◽  
Digital Elevation ◽  
Predominant Orientation ◽  
Elevation Model

A disposição de estruturas geológicas em áreas planálticas é elemento importante na compreensão da dinâmica que ocorre na superfície de suas encostas e que é responsável pela esculturação do relevo. Neste contexto destacam-se os movimentos gravitacionais, que podem gerar perdas econômicas, ambientais e humanas em eventos de alta energia e/ou com grande extensão. Esta pesquisa analisou a influência de lineamentos estruturais no desencadeamento dos movimentos gravitacionais no maciço de Uruburetama, localizado no estado do Ceará. A metodologia consistiu na extração automática de lineamentos a partir do Modelo Digital de Elevação (MDE) fornecido pelo sensor orbital ALOS PALSAR. A partir da média de filtros direcionais aplicados a 0°, 45°, 90° e 135° de iluminação foi possível realçar as feições lineares da imagem original, facilitando sua extração. Posteriormente, foram elaborados mapas de distribuição espacial e densidade de lineamentos, além de diagrama de roseta. Tais produtos subsidiaram a análise da disposição dos principais trends estruturais da área, destacando que a maior densidade e a orientação predominante de lineamentos podem ser indicativas do grau de susceptibilidade à ocorrência de movimentos de massa no maciço de Uruburetama, desde que também sejam consideradas as características físicas dominantes e o grau de intervenção humana nas encostas. Os resultados demonstraram que os lineamentos estruturais obtidos de forma automática, quando analisados em conjunto com as características ambientais podem ser aplicados na análise de susceptibilidade à ocorrência de movimentos de massa.  Influence of structural lineaments as a trigger of mass movements in the Uruburetama massif, Ceará state, Brazil A B S T R A C TThe geological structures arrangement in plateau areas is an important element in understanding the dynamics that occur on the surface of their slopes and which is responsible for relief sculpting. In this context, gravitational movements stand out, which can generate economic, environmental and human losses in high energy events and / or with large extension. This research analyzed the influence of structural lineaments in the gravitational movements triggering in the Uruburetama massif, located in the state of Ceará. The methodology consisted of automatic extraction of lineaments from the Digital Elevation Model (DEM) provided by the ALOS PALSAR orbital sensor. From the average of directional filters applied at 0°, 45°, 90° and 135° of illumination it was possible to enhance the linear features of the original image, facilitating their extraction. Subsequently, maps of spatial distribution and lineaments density were developed, as well as a rosette diagram. Such products subsidized the analysis of the disposition of the main structural trends of the area, emphasizing that the higher density and the predominant orientation of lineaments may be indicative of the degree of susceptibility to the occurrence of mass movements in the Uruburetama massif, if the dominant physical conditions and the degree of human intervention on the slopes are also considered. The results showed that the structural lineaments obtained automatically, when analyzed together with the environmental characteristics can be applied in the susceptibility analysis to the occurrence of mass movements.Keywords: ALOS PALSAR, directional filters, image fusion, lineaments extraction

Lowlands Mapping in Forest Guinea

2013 ◽  
Vol 4 (1) ◽  
pp. 20-34 ◽  
Author(s):  
S. Saïdi ◽  
A. Camara ◽  
L. Gazull ◽  
M. Passouant ◽  
M. Soumaré
Keyword(s):  
Surface Topography ◽  
Digital Elevation Model ◽  
Low Cost ◽  
Mapping Method ◽  
Drainage Network ◽  
Digital Elevation ◽  
Agricultural Potential ◽  
Forested Areas ◽  
Main Index ◽  
Elevation Model

This article presents a lowland mapping method for the Forested Guinea (Guinée Forestière) using a 30 m resolution Digital Elevation Model (DEM) that is currently the best option to analyze large forested areas. This low cost DEM method applies surface topography analysis processes to better discriminate areas with stagnant and/or accumulated water. The main index selected is the immediate proximity of flat areas to drainage network, the former with slope gradients not exceeding 5% (2.86°). The mapped lowlands potential cover a surface of 4516 km2, i.e., 10% of the total area of the region with hydro-agricultural potential.

Sign in / Sign up

Export Citation Format

Share Document