scholarly journals Mechanism of Depression by Fe3+ During Hemimorphite Flotation

Minerals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 790
Author(s):  
Junbo Liu ◽  
Shuming Wen ◽  
Qicheng Feng ◽  
Qian Zhang ◽  
Yijie Wang ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Electrochemical Impedance ◽  
Test Results ◽  
X Ray ◽  
Inductively Coupled ◽  
Adsorption Analysis ◽  
Plasma Mass Spectrometry ◽  
Local Electrochemical Impedance Spectroscopy ◽  
Ph Range

Sulfide hemimorphite can be depressed by Fe3+ during flotation. In this study, the depression mechanism was studied by microflotation, inductively-coupled plasma mass spectrometry, local electrochemical impedance spectroscopy (LEIS), and X-ray photoelectron spectroscopy (XPS). Flotation test results suggested that sulfated hemimorphite can be depressed by Fe3+ across the entire pH range. LEIS, adsorption analysis, and XPS indicated that S species were adsorbed on hemimorphite as ZnS. The sulfide film was attenuated and no adsorbed Fe species were found after treatment with Fe3+. The results indicate that Fe3+ reacts with the ZnS film, which decreases the number S species, and this leads to hemimorphite depression.

scholarly journals Fe-Containing MOFs as Seeds for the Preparation of Highly Active Fe/Al-SBA-15 Catalysts in the NAlkylation of Aniline

Molecules ◽  
2019 ◽  
Vol 24 (15) ◽  
pp. 2695 ◽  
Author(s):  
Mhadmhan ◽  
Marquez-Medina ◽  
Romero ◽  
Reubroycharoen ◽  
Luque
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Catalytic Performance ◽  
Alkylation Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Highly Active ◽  
Milling Method ◽  
Plasma Mass Spectrometry

We have successfully incorporated iron species into mesoporous aluminosilicates (AlSBA15) using a simple mechanochemical milling method. The catalysts were characterized by nitrogen physisorption, inductively coupled plasma mass spectrometry (ICP-MS), pyridine (PY) and 2,6-dimethylpyridine (DMPY) pulse chromatography titration, powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). The catalysts were tested in the N-alkylation reaction of aniline with benzyl alcohol for imine production. According to the results, the iron sources, acidity of catalyst and reaction conditions were important factors influencing the reaction. The catalyst showed excellent catalytic performance, achieving 97% of aniline conversion and 96% of imine selectivity under optimized conditions.

scholarly journals Hydrodeoxygenation of Benzofuran over Bimetallic Ni-Cu/γ-Al2O3 Catalysts

Catalysts ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 274
Author(s):  
Tianhan Zhu ◽  
Hua Song ◽  
Feng Li ◽  
Yanguang Chen
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Flow Reactor ◽  
Reaction Network ◽  
Product Yield ◽  
X Ray ◽  
Inductively Coupled ◽  
Plasma Mass Spectrometry ◽  
Temperature Programmed ◽  
Al2o3 Catalyst

Bimetallic NixCu(10−x)/γ-Al2O3 catalysts (where x is the mass fraction of Ni) with different Ni/Cu mass ratios were prepared. The catalysts were characterized by X-ray diffractometry, N2 adsorption–desorption, inductively coupled plasma mass spectrometry, X-ray photoelectron spectroscopy, H2-temperature programmed reduction, and transmission electron microscopy. The effect of Ni/Cu mass ratio on benzofuran hydrodeoxygenation was investigated in a fixed-flow reactor. Cu addition improved the NiO reducibility. The strong interaction of Ni and Cu led to the formation of smaller and highly dispersed CuO and NiO species over γ-Al2O3, which favors an improvement in catalytic activity. Among the as-prepared catalysts, the Ni5Cu5/γ-Al2O3 showed the highest deoxygenated product yield (79.9%) with an acceptable benzofuran conversion of 95.2%, which increased by 18.3% and 16.9% compared with that of the monometallic Ni/γ-Al2O3 catalyst. A possible reaction network was proposed, which would provide insight into benzofuran hydrodeoxygenation over the Ni5Cu5/γ-Al2O3 catalyst.

scholarly journals Morphological Transformation of Silver Nanoparticles from Commercial Products: Modeling from Product Incorporation, Weathering through Use Scenarios, and Leaching into Wastewater

Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1258 ◽  
Author(s):  
Selvan Mohan ◽  
Juliska Princz ◽  
Banu Ormeci ◽  
Maria C. DeRosa
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Environmental Fate ◽  
Consumer Products ◽  
Morphological Transformation ◽  
Environmental Testing ◽  
X Ray ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Plasma Mass Spectrometry

There is increasing interest in the environmental fate and effects of engineered nanomaterials due to their ubiquitous use in consumer products. In particular, given the mounting evidence that dramatic transformations can occur to a nanomaterial throughout its product lifecycle, the appropriateness of using pristine nanomaterials in environmental testing is being questioned. Using a combination of transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma-mass spectrometry (ICP-MS), this work examines the morphological and compositional effects of conditions mimicking a typical lifecycle of a nano-enabled product, from the production of the silver nanoparticle (AgNP)-laden textiles, through its use, laundering, and then finally, its leaching and incubation in the wastewater collection system. These simulated weathering conditions showed evidence for the transformation of AgNPs into AgCl and Ag2S. Incubation in raw wastewater had the most dramatic effect on the AgNPs in terms of transformation, no matter what initial weathering was applied to the NPs prior to incubation. However, despite extensive transformation noted, AgNPs were still present within all the samples after the use scenarios.

MICROSTRUCTURE AND PROPERTIES OF THE Ni–B AND Ni–B–Ce ULTRASONIC-ASSISTED ELECTROLESS COATINGS

2018 ◽  
Vol 25 (06) ◽  
pp. 1950006 ◽  
Author(s):  
WEI QIAN ◽  
HAOTIAN CHEN ◽  
CHENQI FENG ◽  
LIYING ZHU ◽  
HUANMING WEI ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Electrochemical Impedance ◽  
Low Carbon Steel ◽  
Amorphous Structure ◽  
Low Carbon ◽  
X Ray ◽  
Inductively Coupled ◽  
Hardness Tester

We successfully obtained Ni–B and Ni–B–Ce coatings with and without sonication on low-carbon steel (Q235) through electroless plating with the deposition time of 60[Formula: see text]min. The surface morphology and elemental composition of the coatings were evaluated by scanning electron microscopy (SEM) and inductively coupled plasma (ICP). The 11[Formula: see text][Formula: see text]m thick sonicated Ni–B–Ce (Son-Ni–B–Ce) coating is uniform with the composition of Ni 87.1%, B 6.2% and Ce 6.6%. X-ray diffraction (XRD) measurements implied a typical broaden peak around 44∘, considered as amorphous structure which was confirmed by selected area electron diffraction pattern (SAED). Atomic force microscopy (AFM) showed a typical circular pit of Ni–B–Ce coating and Son-Ni–B–Ce coating. X-ray photoelectron spectroscopy (XPS) revealed the chemical status of coating components. The mechanical and corrosion resistance properties were determined by Vickers hardness tester, potentiodynamic polarization (Tafel) and electrochemical impedance spectroscopy (EIS) in 3.5[Formula: see text]wt. % NaCl solution. As a result, the Son-Ni–B–Ce coating revealed the optimum hardness (956[Formula: see text]HV), minimum roughness [Formula: see text] (92.38[Formula: see text]nm) and excellent corrosion resistance (3.65[Formula: see text][Formula: see text]Acm[Formula: see text] among all coatings.

scholarly journals Geophagic Clays from Cameroon: Provenance, Metal Contamination and Health Risk Assessment

2021 ◽  
Vol 18 (16) ◽  
pp. 8315
Author(s):  
Georges-Ivo Ekosse ◽  
George Elambo Nkeng ◽  
Nenita Bukalo ◽  
Olaonipekun Oyebanjo
Keyword(s):  
Health Risk ◽  
Inductively Coupled Plasma ◽  
Risk Index ◽  
Human Health Risk ◽  
Carcinogenic Risk ◽  
Anthropogenic Sources ◽  
Contamination Assessment ◽  
X Ray ◽  
Inductively Coupled ◽  
Plasma Mass Spectrometry

This study assessed the mineralogical and geochemical characteristics of geophagic clays sold in some markets in Cameroon to ascertain their provenance, contamination status and human health risk. To achieve this, 40 samples from 13 markets in Cameroon were purchased and analysed using X-ray diffractometry, X-ray fluorescence and laser ablation inductively coupled plasma mass spectrometry for their mineralogy and geochemistry, respectively. The geophagic clays were dominantly made up of kaolinite and quartz. Their chemistry was dominated by SiO2, Al2O3 and LOI with means of 48.76 wt%, 32.12 wt% and 13.93 wt%, respectively. The major, trace and rare earth elements data showed that these geophagic clays were predominantly derived from felsic rocks. The contamination assessment indicated no enrichment of metals from anthropogenic sources, except for Zn in samples from Acacia, Madagascar and Mfoudi markets. The index of geo-accumulation indicated no contamination to moderate contamination of the clays. The non-carcinogenic index values for Fe, Co, Cr, Cu, Ni, Pb and Zn were generally less than 1, suggesting no non-carcinogenic risk exposure to children and adults consuming the geophagic clays from these metals. The carcinogenic risk index (TCR) for Ni and Cr were above 10−6, which implies that children and adults are vulnerable to minimal carcinogenic health risk. The TCR values from Ni posed the highest risk, especially to children consuming clays from some markets.

scholarly journals Characterization of Fly Ash Generated from Matla Power Station in Mpumalanga, South Africa

2012 ◽  
Vol 9 (4) ◽  
pp. 1788-1795 ◽  
Author(s):  
Olushola S. Ayanda ◽  
Olalekan S. Fatoki ◽  
Folahan A. Adekola ◽  
Bhekumusa J. Ximba
Keyword(s):  
Fly Ash ◽  
Inductively Coupled Plasma ◽  
Coal Fly Ash ◽  
Harmful Effect ◽  
Point Of Zero Charge ◽  
X Ray Diffraction ◽  
Power Station ◽  
X Ray ◽  
Inductively Coupled ◽  
Plasma Mass Spectrometry

In this study, fly ash was obtained from Matla power station and the physicochemical properties investigated. The fly ash was characterized by x-ray fluorescence, x-ray diffraction, scanning electron microscopy, and inductively coupled plasma mass spectrometry. Surface area, particle size, ash and carbon contents, pH, and point of zero charge were also measured. The results showed that the fly ash is alkaline and consists mainly of mullite (Al6Si2O13) and quartz (SiO2). Highly toxic metals As, Sb, Cd, Cr, and Pb as well as metals that are essential to health in trace amounts were also present. The storage and disposal of coal fly ash can thus lead to the release of leached metals into soils, surface and ground waters, find way into the ecological systems and then cause harmful effect to man and its environments.

Sign in / Sign up

Export Citation Format

Share Document