scholarly journals Immobilization of Lead and Zinc Leached from Mining Residual Materials in Kabwe, Zambia: Possibility of Chemical Immobilization by Dolomite, Calcined Dolomite, and Magnesium Oxide

Minerals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 763 ◽  
Author(s):  
Pawit Tangviroon ◽  
Kenta Noto ◽  
Toshifumi Igarashi ◽  
Takeshi Kawashima ◽  
Mayumi Ito ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Magnesium Oxide ◽  
Batch Experiments ◽  
Chemical Immobilization ◽  
Effluent Standards ◽  
Lead And Zinc ◽  
Co Precipitation

Massive amount of highly contaminated mining residual materials (MRM) has been left unattended and has leached heavy metals, particularly lead (Pb) and zinc (Zn) to the surrounding environments. Thus, the performance of three immobilizers, raw dolomite (RD), calcined dolomite (CD), and magnesium oxide (MO), was evaluated using batch experiments to determine their ability to immobilize Pb and Zn, leached from MRM. The addition of immobilizers increased the leachate pH and decreased the amounts of dissolved Pb and Zn to different extents. The performance of immobilizers to immobilize Pb and Zn followed the following trend: MO > CD > RD. pH played an important role in immobilizing Pb and Zn. Dolomite in RD could slightly raise the pH of the MRM leachate. Therefore, the addition of RD immobilized Pb and Zn via adsorption and co-precipitation, and up to 10% of RD addition did not reduce the concentrations of Pb and Zn to be lower than the effluent standards in Zambia. In contrast, the presence of magnesia in CD and MO significantly contributed to the rise of leachate pH to the value where it was sufficient to precipitate hydroxides of Pb and Zn and decrease their leaching concentrations below the regulated values. Even though MO outperformed CD, by considering the local availability of RD to produce CD, CD could be a potential immobilizer to be implemented in Zambia.

Exploring the characterization of Ni doped MgO nanoparticles using co-precipitation method

2020 ◽  
Vol 3 (1) ◽  
pp. 30-33
Author(s):  
Muthulakshmi M ◽  
Madhumitha G
Keyword(s):  
Magnesium Oxide ◽  
Analytical Techniques ◽  
Nickel Chloride ◽  
Precipitation Method ◽  
Crystalline Powder ◽  
High Melting Point ◽  
Design Synthesis ◽  
Mgo Nanoparticles ◽  
Co Precipitation

Nanotechnology is a field of applied science focused on design, synthesis and characterization of nanomaterials. The nickel and magnesium have improved their applications in transparent electrodes and nano electronics. In addition, magnesium oxide has moisture resistance and high melting point properties. In the present work has been carried out in the development of green crystalline powder of nickel doped magnesium oxide nanoparticles by Co-precipitation method, from the mixture of nickel chloride and magnesium chloride with KOH as solvent. From the XRD results, crystalline size of the particle can be observed. Spherical structure of Ni doped MgO nanoparticles were indicated by SEM results and powdered composition of samples were obtained from FTIR. EDAX represents the peak composition of the nanoparticle. The above analytical techniques have confirmed that the Ni doped MgO nanoparticles obtained from the mixture of NiCl2 and MgCl2.

Mechanisms and Remediation Technologies of Sulfate Removal from Acid Mine Drainage

2012 ◽  
Vol 610-613 ◽  
pp. 3252-3256
Author(s):  
Mei Qin Chen ◽  
Feng Ji Wu
Keyword(s):  
Heavy Metals ◽  
Acid Mine Drainage ◽  
Mine Drainage ◽  
Metal Corrosion ◽  
Sulfate Ion ◽  
High Concentration ◽  
Biological Reduction ◽  
Acid Mine ◽  
Sulfate Removal ◽  
Co Precipitation

Acid mine drainage (AMD) has properties of extreme acidification, quantities of sulfate and elevated levels of soluble heavy metals. It was a widespread environmental problem that caused adverse effects to the qualities of ground water and surface water. In the past decades, most of investigations were focused on the heavy metals as their toxicities for human and animals. As another main constitution of AMD, sulfate ion is nontoxic, yet high concentration of sulfate ion can cause many problems such as soil acidification, metal corrosion and health problems. More attention should be paid on the sulfate ion when people focus on the AMD. In the paper, sulfate removal mechanisms include adsorption, precipitation, co-precipitation and biological reduction were analyzed and summarized. Meanwhile, the remediation technologies, especially the applications of them in China were also presented and discussed.

Research on the Morphological of Lead and Zinc in the Smelting Slag

2015 ◽  
Vol 1088 ◽  
pp. 200-205
Author(s):  
Lin Yu ◽  
Dong Wei Li
Keyword(s):  
Heavy Metals ◽  
Sequential Extraction ◽  
Ecological Risk ◽  
Total Content ◽  
Residual Fraction ◽  
Bcr Sequential Extraction ◽  
Lead And Zinc ◽  
Smelting Slag ◽  
Reducible Fraction

In this paper analysed the forms of heavy metals (Zn Pb Cd and As) of the Smelting Slag for Lead and Zinc,using BCR sequential extraction. Different chemical morphological of heavy metals have different activity and harmfulness. Migration and Utilization of heavy metals were decided by the existent form of heavy metals in the soil,which influenced Bioactivity and Toxicity. The results show that the main forms of Zn and Cd are Oxidizable and Residual fraction, and Pb mainly occurred in Oxidizable and Reducible fraction. however, As mainly occurred in Residual fraction, which the percentage of reachs 99.56%. According to the percentage of fractions extracted in total content (As is 0.44%, Zn is 14.7%, Pb is 85.98%, Cd is 48.86%),the latent ecological risk of heavy metals varied in the descending order of,Pb Cd Zn and As.

scholarly journals Pre-treatment of desalination feed seawater by Jordanian Tripoli, Pozzolana, and Feldspar: Batch experiments

2011 ◽  
Vol 17 (2) ◽  
pp. 163-171 ◽  
Author(s):  
Aiman Al-Rawajfeh ◽  
Khaldoon Al-Whoosh ◽  
Dwairi Al ◽  
Ahmad Al-Maaberah ◽  
Amer Tarawneh
Keyword(s):  
Layered Double Hydroxide ◽  
Metal Ion ◽  
Raw Materials ◽  
Batch Experiments ◽  
Initial Concentration ◽  
Considerable Potential ◽  
Ion Concentrations ◽  
Pre Treatment ◽  
Co Precipitation ◽  
Double Hydroxide

In this research, composites of layered double hydroxide (LDH) with three Jordanian natural raw materials; Tripoli (T), Pozzolana (P) and Feldspar (F) were prepared by co-precipitation and have been used for feed seawater pre-treatment. The data reveals that percent adsorption decreased with increase in initial concentration, but the actual amount of adsorbed ions per unit mass of LDH/T-P-F increased with increase in metal ion concentrations. The values of ?Go were negative and within 21 to 26 KJ/mol, while the values of ?Ho and ?So were positive and within the range of 0.1 to 25 KJ/mol. The values of ?H?, ?S?, and ?G? indicate the favorability of physisorption and show that the LDH/T-P-F composites have a considerable potential as adsorbents for the removal of ions from seawater.

INSOLUBILIZATION OF HEAVY METALS IN VOLCANIC DEPOSIT WITH MAGNESIUM OXIDE INSOLUBILIZER

2020 ◽  
Vol 76 (7) ◽  
pp. III_393-III_401
Author(s):  
Yutaka DOTE ◽  
Kenichi ITO ◽  
Tomoo SEKITO ◽  
Seiichi OBANA ◽  
Shingo FUJII
Keyword(s):  
Heavy Metals ◽  
Magnesium Oxide ◽  
Volcanic Deposit

scholarly journals Optimization of pH, temperature and carbon source for bioleaching of heavy metals by Aspergillus flavus isolated from contaminated soil

2019 ◽  
Vol 42 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Sadia Qayyum ◽  
Ke Meng ◽  
Sidra Pervez ◽  
Faiza Nawaz ◽  
Changsheng Peng
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Aspergillus Flavus ◽  
Contaminated Soil ◽  
Ph Value ◽  
Optimal Conditions ◽  
Batch Experiments ◽  
Molecular Biological Analysis ◽  
One Step ◽  
Industrial Mining

Abstract Soil contamination with heavy metal content is a growing concern throughout the world as a result of industrial, mining, agricultural and domestic activities. Fungi are the most common and efficient group of heavy metal resistant microbe family which have potential for metal bioleaching. The use of filamentous fungi in bioleaching of heavy metals from contaminated soil has been developed recently. The current study intends to isolate a strain with the ability to degrade the pH value of the liquid medium. Identification results based on morphological and molecular biological analysis gave a 98% match to Aspergillus flavus. Batch experiments were conducted to select the optimal conditions for bioleaching process which indicated that 130 mg/ L sucrose, neutral pH and temperature of 30°C were more suitable during 15-day bioleaching experiments using A. flavus. In one-step bioleaching, the bioleaching efficiencies were 18.16% for Pb, 39.77% for Cd and 58.22% for Zn+2, while two-step bioleaching showed efficiencies of 16.91% for Pb, 49.66% for Cd and 65.73% for Zn+2. Overall, this study indicates that bioleaching of heavy metals in contaminated soil using A. flavus has the potential for contaminated soil remediation.

Size distribution and source of heavy metals in particulate matter on the lead and zinc smelting affected area

2018 ◽  
Vol 71 ◽  
pp. 188-196 ◽  
Author(s):  
Kai Zhang ◽  
Fahe Chai ◽  
Zilong Zheng ◽  
Qing Yang ◽  
Xuecai Zhong ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Particulate Matter ◽  
Size Distribution ◽  
Affected Area ◽  
Lead And Zinc ◽  
Zinc Smelting

scholarly journals The Novel Use of Saraca thaipingensis Leaf Powder as Potential Biosorbent Material for the Removal of Chromium(VI)

2015 ◽  
Vol 3 (3) ◽  
pp. 35-39
Author(s):  
Sannasi Palsan ◽  
Chai Swee Fern ◽  
Stephanie Bernardine ◽  
Lim Fan Shiang
Keyword(s):  
Heavy Metals ◽  
Particle Size ◽  
Contact Time ◽  
Low Cost ◽  
Peninsular Malaysia ◽  
The Novel ◽  
Batch Experiments ◽  
Chromium Vi ◽  
Removal Of Heavy Metals ◽  
Leaf Powder

Saraca thaipingensis or ‘Gapis’ tree, classified under the Fabaceae family is a native of Taiping; copious over Peninsular Malaysia and Southeast Asia. The withered and fallen dead leaves were collected from INTI International University’s garden walkway. To date, literature has yet to capture the use of S. thaipingensis tree parts or refuse as potential biosorbent material for the removal of heavy metals thus verifying the novelty of this study. Batch experiments were carried out with the leaf powder to study the effects of dosage, particle size and contact time towards Cr(VI) removal (%) at 1-100 mg/L. Results showed that Cr(VI) removal increased from 52.22% to 99.31% (p < 0.05) with increase in biosorbent dosage (0.005, 0.010, 0.015, 0.020, 0.025 and 0.050 g). The different particle size ranges tested were: 107-125, 126-150, 151-250, 251-500, and 501- 1000 ?m. Highest Cr(VI) removal of 99.53% was obtained with the 151-250 ?m particle size; further size decrease did not yield more removal (p > 0.05). The optimal Cr(VI) removal was recorded after 45 min (99.62%) and 90 min (99.76%) contact time (p > 0.05). Further characterization and optimization studies are being carried out to develop a novel, sustainable, low cost yet effective leaf powder based biosorbent material.

Sign in / Sign up

Export Citation Format

Share Document