scholarly journals Role of the Down-Bending Plate as a Detrital Source in Convergent Systems Revealed by U–Pb Dating of Zircon Grains: Insights from the Southern Andes and Western Italian Alps

Minerals ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 632
Author(s):  
Andrea Di Giulio ◽  
Chiara Amadori ◽  
Pierre Mueller ◽  
Antonio Langone
Keyword(s):  
Tectonic Evolution ◽  
Subduction Zones ◽  
Western Alps ◽  
Published Data ◽  
Continental Margins ◽  
Provenance Analysis ◽  
Clastic Sediments ◽  
Continental Block ◽  
Back Arc ◽  
Subduction System

In convergent zones, several parts of the geodynamic system (e.g., continental margins, back-arc regions) can be deformed, uplifted, and eroded through time, each of them potentially delivering clastic sediments to neighboring basins. Tectonically driven events are mostly recorded in syntectonic clastic systems accumulated into different kinds of basins: trench, fore-arc, and back-arc basins in subduction zones and foredeep, thrust-top, and episutural basins in collisional settings. The most widely used tools for provenance analysis of synorogenic sediments and for unraveling the tectonic evolution of convergent zones are sandstone petrography and U–Pb dating of detrital zircon. In this paper, we present a comparison of previously published data discussing how these techniques are used to constrain provenance reconstructions and contribute to a better understanding of the tectonic evolution of (i) the Cretaceous transition from extensional to compressional regimes in the back-arc region of the southern Andean system; and (ii) the involvement of the passive European continental margin in the Western Alps subduction system during impending Alpine collision. In both cases, sediments delivered from the down-bending continental block are significantly involved. Our findings highlight its role as a detrital source, which is generally underestimated or even ignored in current tectonic models.

Provenance analysis on detrital zircons from the back-arc Arivechi basin: Implications for the Upper Cretaceous tectonic evolution of northern Sonora and southern Arizona

2018 ◽  
Vol 84 ◽  
pp. 276-298
Author(s):  
José Luis Rodríguez-Castañeda ◽  
Amabel Ortega-Rivera ◽  
Jaime Roldán-Quintana ◽  
Inocente Guadalupe Espinoza-Maldonado
Keyword(s):  
Tectonic Evolution ◽  
Upper Cretaceous ◽  
Detrital Zircons ◽  
Provenance Analysis ◽  
Back Arc

The role of transform faults during back-arc spreading centre jumps

2020 ◽  
Author(s):  
Nicholas Schliffke ◽  
Jeroen van Hunen ◽  
Frederic Gueydan ◽  
Valentina Magni ◽  
Mark B. Allen
Keyword(s):  
Subduction Zones ◽  
3D Models ◽  
Parameter Study ◽  
Transform Faults ◽  
Strongly Coupled ◽  
Threshold Length ◽  
Scotia Arc ◽  
Back Arc ◽  
Subduction System

<p>Jumps in the location of back-arc spreading centres are a common feature of back-arc basins, but the controlling factors are not understood. In several narrow subduction zones with a long subduction history, such as the Scotia arc or Tyrhennian Sea, several spreading centres have been active in the course of history with regular, quasi-instantaneous jumps towards the retreating trench. A prominent feature of these regions are large bounding transform (‘STEP’) faults. However, whether STEP faults influence the (unknown) dynamics spreading centre jumps remains to be explored.</p><p> </p><p>We therefore run 3D-models to simulate a long narrow subducting slab, bound by continents, which retreats and creates necessary STEP-faults self-consistently. The results offer a new mechanism for back-arc spreading jumps: After the creation of a back-arc spreading centre in the retreating subduction system, transform faults between trench and back-arc basin form. Spreading jumps are thus a consequence of the fact that these constantly elongating transform faults, which decouple the overriding plate from neighbouring plates, fail to remain active once a threshold length (~1.3x plate width) is reached. Subsequently, the back-arc basin and neighbouring plates are strongly coupled, and ongoing trench retreat localizes stresses and rapidly ruptures the overriding plate closer to the trench while the old spreading centre is abandoned.  In a parameter study, the results further explain why the narrowest subduction zones, such as the Calabrian Arc, experience more frequent and closer spreading jumps than the long-period jumps of a wider subduction zone such as the Scotia Arc. The widest subduction zones should not undergo any back-arc spreading jumps with this mechanism, consistent with other natural examples.</p>

Evolution of Orogenic Plateaus at Subduction Zones - Sinking and raising the southern margin of the Central Anatolian Plateau

2018 ◽  
Author(s):  
David Fernández-Blanco
Keyword(s):  
Tectonic Evolution ◽  
Subduction Zones ◽  
Inversion Tectonics ◽  
High Discharge ◽  
Anatolian Plateau ◽  
Surface Uplift ◽  
Southern Margin ◽  
Wide Range ◽  
Forearc Basins ◽  
Orogenic Plateaus

Orogenic plateaus have raised abundant attention amongst geoscientists during the last decades, offering unique opportunities to better understand the relationships between tectonics and climate, and their expression on the Earth’s surface.Orogenic plateau margins are key areas for understanding the mechanisms behind plateau (de)formation. Plateau margins are transitional areas between domains with contrasting relief and characteristics; the roughly flat elevated plateau interior, often with internally drained endorheic basins, and the external steep areas, deeply incised by high-discharge rivers. This thesis uses a wide range of structural and tectonic approaches to investigate the evolution of the southern margin of the Central Anatolian Plateau (CAP), studying an area between the plateau interior and the Cyprus arc. Several findings are presented here that constrain the evolution, timing and possible causes behind the development of this area, and thus that of the CAP. After peneplanation of the regional orogeny, abroad regional subsidence took place in Miocene times in the absence of major extensional faults, which led to the formation of a large basin in the northeast Mediterranean. Late Tortonian and younger contractional structures developed in the interior of the plateau, in its margin and offshore, and forced the inversion tectonics that fragmented the early Miocene basin into the different present-day domains. The tectonic evolution of the southern margin of the CAP can be explained based on the initiation of subduction in south Cyprus and subsequent thermo-mechanical behavior of this subduction zone and the evolving rheology of the Anatolian plate. The Cyprus slab retreat and posterior pull drove subsidence first by relatively minor stretching of the crust and then by its flexure. The growth by accretion and thickening of the upper plate, and that of the associated forearc basins system, caused by accreting sediments, led to rheological changes at the base of the crust that allowed thermal weakening, viscous deformation, driving subsequent surface uplift and raising the modern Taurus Mountains. This mechanism could be responsible for the uplifted plateau-like areas seen in other accretionary margins. ISBN: 978-90-9028673-0

scholarly journals Post-magmatic fracturing, fluid flow, and vein mineralization in supra-subduction zones: a comparative study on vein calcites from the Troodos ophiolite and the Izu–Bonin forearc and rear arc

2021 ◽  
Vol 110 (2) ◽  
pp. 627-649
Author(s):  
Dennis Quandt ◽  
W. Kurz ◽  
P. Micheuz
Keyword(s):  
Fluid Flow ◽  
Subduction Zones ◽  
Growth Dynamics ◽  
Pillow Lava ◽  
Published Data ◽  
Fracturing Fluid ◽  
Deep Seawater ◽  
Vein Formation ◽  
Mineralization Processes ◽  
Extensional Faulting

AbstractBased on the published data of pillow lava-hosted mineralized veins, this study compares post-magmatic fracturing, fluid flow, and secondary mineralization processes in the Troodos and Izu–Bonin supra-subduction zone (SSZ) and discusses the crucial factors for the development of distinct vein types. Thin section and cathodoluminescence petrography, Raman spectroscopy, fluid inclusion microthermometry, and trace element and isotope (87Sr/86Sr, δ18O, δ13C, Δ47) geochemistry indicate that most veins consist of calcite that precipitated from pristine to slightly modified seawater at temperatures < 50 °C. In response to the mode of fracturing, fluid supply, and mineral growth dynamics, calcites developed distinct blocky (precipitation into fluid-filled fractures), syntaxial (crack and sealing), and antitaxial (diffusion-fed displacive growth) vein microtextures with vein type-specific geochemical signatures. Blocky veins predominate in all study areas, whereas syntaxial veins represent subordinate structures. Antitaxial veins occur in all study areas but are particularly abundant in the Izu–Bonin rear arc where the local geological setting was conducive of antitaxial veining. The temporal framework of major calcite veining coincides with the onset of extensional faulting in the respective areas and points to a tectonic control on veining. Thus, major calcite veining in the Troodos SSZ began contemporaneously with volcanic activity and extensional faulting and completed within ~ 10–20 Myr. This enabled deep seawater downflow and hydrothermal fluid upflow. In the Izu–Bonin forearc, reliable ages of vein calcites point to vein formation > 15 Myr after subduction initiation. Therefore, high-T mineralization (calcite, quartz, analcime) up to 230 °C is restricted to the Troodos SSZ.

Magnetite (U-Th-Sm)/He dating: analytical challenges and application

2021 ◽  
Author(s):  
Marianna Corre ◽  
Martine Lanson ◽  
Arnaud Agranier ◽  
Stephane Schwartz ◽  
Fabrice Brunet ◽  
...  
Keyword(s):  
Laser Ablation ◽  
Subduction Zones ◽  
Major Elements ◽  
Western Alps ◽  
Planetary Science ◽  
Mantle Xenoliths ◽  
Transform Faults ◽  
Geological Processes ◽  
History Of ◽  
Geochronological Constraints

&lt;p&gt;Magnetite (U-Th-Sm)/He dating method has a strong geodynamic significance, since it provides geochronological constraints on serpentinization episodes, which are associated to important geological processes such as ophiolite obductions, subduction zones, transform faults and fluid circulations. Although helium content that range from 0.1 pmol/g to 20 pmol/g can routinely be measured, the application of this dating technique however is still limited due to major analytical obstacles. The dissolution of a single magnetite crystal and the measurement of the U, Th and Sm present at the ppb level in the corresponding solution, remains highly challenging, especially because of the absence of magnetite standard. In order to overcome these analytical issues, two strategies have been followed, and tested on magnetite from high-pressure rocks from the Western Alps (Schwartz et al., 2020). Firstly, we purified U, Th and Sm (removing Fe and other major elements) using ion exchange columns in order to analyze samples, using smaller dilution. Secondly, we performed in-situ analyzes by laser-ablation-ICPMS. Since no solid magnetite certified standard is yet available, we synthetized our own by precipitating magnetite nanocrystals. The first quantitative results obtained by LA-ICP-MS using this synthetic material along with international glass standards, are promising. The laser-ablation technique overcomes the analytical difficulties related to sample dissolution and purification. It thus opens the path to the dating of magnetite (and also spinels) in various ultramafic rocks such as mantle xenoliths or serpentinized peridotites in ophiolites.&lt;/p&gt;&lt;p&gt;Schwartz S., Gautheron C., Ketcham R.A., Brunet F., Corre M., Agranier A., Pinna-Jamme R., Haurine F., Monvoin G., Riel N., 2020, Unraveling the exhumation history of high-press ure ophiolites using magnetite (U-Th-Sm)/He thermochronometry. Earth and Planetary Science Letters 543 (2020) 116359.&lt;/p&gt;

Opening and closure of Iranian back-arc basins: A seismic tomography view

2021 ◽  
Author(s):  
Nalan Lom ◽  
Abdul Qayyum ◽  
Derya Gürer ◽  
Douwe G. van der Meer ◽  
Wim Spakman ◽  
...  
Keyword(s):  
Seismic Tomography ◽  
Subduction Zones ◽  
Three Dimensional ◽  
Plate Motion ◽  
Limited Information ◽  
Three Dimensional Model ◽  
Slab Geometry ◽  
Novel Approach ◽  
Sanandaj Sirjan Zone ◽  
Back Arc

&lt;p&gt;Iran is a mosaic of continental blocks that are surrounded by Tethyan oceanic relics. Remnants of these oceanic rock assemblages are exposed around the Central Iranian Microcontinent (CIM), discretely along the Sanandaj-Sirjan Zone and in Jaz-Murian. The ophiolite belts surrounding the CIM are mainly assumed to represent narrow back-arc basins that opened in Cretaceous and closed before the Eocene. Although these ophiolites are exposed as small pieces on continental crust today, they represent oceans wide enough to form supra-subduction ophiolites and arc-related magmatic rocks which suggest that their palaeogeographic width was at least some hundreds of kilometers. Current models for the palaeogeographic dimension, opening and closure of these basins are highly schematic. They usually seem plausible in two-dimensional reconstructions, however a single three-dimensional model explaining whole Iran and its surrounding regions has not been fully accomplished.&amp;#160; This is mostly because while the geological record provides constraints on the origin and ages of the subducted ocean floor, it provides limited information about onset and cessation of the subduction and almost no constraints on the dimension of these oceans and the subduction zones that consumed them.&lt;/p&gt;&lt;p&gt;In this study, we follow a novel approach in estimating the dimension and evolution of these back-arc basin by using seismic tomography. Seismic tomography has revealed that we can image and trace subducted lithosphere relics. Imaged mantle structure is now being used to link sinking slabs with sutures and to define shape of a slab. Systematic comparison of regions where the timing of subduction is reasonably well constrained by geological data showed that slabs sink gradually through the mantle at rates more or less the same. This perspective enabled us to study slab shape as a function of absolute trench motion. While mantle stationary trenches tend to create steep slabs or slab walls, the flat-lying segments are formed where the overlying trenches are mobile relative to the mantle, normal facing during roll-back, overturned during slab advance. &amp;#160;Under the assumption of vertical sinking after break-off, it is also possible to locate the palaeo-trenches. &amp;#160;When combined with absolute plate motion reconstructions, tomographically determined volume and size of the subducted lithosphere can also be used to estimate the size/width of the prehistoric oceans. To this end, we build on and further develop concepts that relate absolute trench motion during subduction to modern slab geometry to evaluate the possible range of dimensions associated with opening and closure of the Iranian back-arc basins.&lt;/p&gt;

Tectonic evolution of the Brian�onnais units along a transect (ECORS-CROP) through the Italian-French Western Alps

2004 ◽  
Vol 97 (3) ◽  
pp. 321-345 ◽  
Author(s):  
Stefan Bucher ◽  
Christina Ulardic ◽  
Romain Bousquet ◽  
Stefano Ceriani ◽  
Bernhard F�genschuh ◽  
...  
Keyword(s):  
Tectonic Evolution ◽  
Western Alps

Refining the Paleoproterozoic tectonothermal history of the Penokean Orogen: New U-Pb age constraints from the Pembine-Wausau terrane, Wisconsin, USA

2021 ◽  
Author(s):  
Jian-Wei Zi ◽  
Stephen Sheppard ◽  
Janet R. Muhling ◽  
Birger Rasmussen
Keyword(s):  
Volcanic Rocks ◽  
Massive Sulfide ◽  
Time Frame ◽  
Metamorphic Event ◽  
Published Data ◽  
Banded Iron Formations ◽  
Time Space ◽  
Lithospheric Extension ◽  
History Of ◽  
Back Arc

An enduring problem in the assembly of Laurentia is uncertainty about the nature and timing of magmatism, deformation, and metamorphism in the Paleoproterozoic Wisconsin magmatic terranes, which have been variously interpreted as an intra-oceanic arc, foredeep or continental back-arc. Resolving these competing models is difficult due in part to a lack of a robust time-frame for magmatism in the terranes. The northeast part of the terranes in northern Wisconsin (USA) comprise mafic and felsic volcanic rocks and syn-volcanic granites thought to have been emplaced and metamorphosed during the 1890−1830 Ma Penokean orogeny. New in situ U-Pb geochronology of igneous zircon from the volcanic rocks (Beecher Formation), and from two tonalitic plutons (the Dunbar Gneiss and Newingham Tonalite) intruding the volcanic rocks, yielded crystallization ages ranging from 1847 ± 10 Ma to 1842 ± 7 Ma (95% confidence). Thus, these rocks record a magmatic episode that is synchronous with bimodal volcanism in the Wausau domain and Marshfield terrane farther south. Our results, integrated with published data into a time-space diagram, highlight two bimodal magmatic cycles, the first at 1890−1860 Ma and the second at 1845−1830 Ma, developed on extended crust of the Superior Craton. The magmatic episodes are broadly synchronous with volcanogenic massive sulfide mineralization and deposition of Lake Superior banded iron formations. Our data and interpretation are consistent with the Penokean orogeny marking west Pacific-style accretionary orogenesis involving lithospheric extension of the continental margin, punctuated by transient crustal shortening that was accommodated by folding and thrusting of the arc-back-arc system. The model explains the shared magmatic history of the Pembine-Wausau and Marshfield terranes. Our study also reveals an overprinting metamorphic event recorded by reset zircon and new monazite growth dated at 1775 ± 10 Ma suggesting that the main metamorphic event in the terranes is related to the Yavapai-interval accretion rather than the Penokean orogeny.

Sign in / Sign up

Export Citation Format

Share Document