scholarly journals First Principles Calculation of the Stability of Iron Bearing Carbonates at High Pressure Conditions

Minerals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 54
Author(s):  
Jun Tsuchiya ◽  
Risa Nishida ◽  
Taku Tsuchiya
Keyword(s):  
High Pressure ◽  
High Spin ◽  
First Principles ◽  
Lower Mantle ◽  
Local Density ◽  
First Principles Calculation ◽  
Generalized Gradient ◽  
Carbonate Minerals ◽  
Pressure Stability ◽  
The Stability

Carbonate minerals such as ferromagnesite (Mg,Fe)CO 3 are suggested to be a possible major deep-carbon host in the lower mantle, because ferromagnesite is possibly stabilized by Fe spin crossover under pressure. However, the behavior of Fe-bearing carbonates under lower mantle pressure conditions has not been suitably examined thus far. Thus, in this study, we investigate the high-pressure stability of ferromagnesite and possible high-pressure structures with the chemical composition of (Mg 0.833 Fe 0.167 )CO 3 via first principles calculation using internally consistent local density approximation with Hubbard parameter (LDA+U) method, which can more accurately account for the electronic state of Fe than the LDA and generalized gradient approximation (GGA) approaches. The enthalpy values obtained via our calculations suggest that (Mg 0.833 Fe 0.167 )CO 3 undergoes phase transition from the R 3 ¯ c structure (high spin) to the P 1 ¯ (high spin) at 50 GPa, and to C2/m (high-spin) structure above 80 GPa, under static 0 K conditions. Therefore, no spin transitions in these carbonate minerals is expected under the lower mantle pressure conditions.

scholarly journals Structural and Electronic Properties of Orthorhombic Phase Bi2Se3 Based On First-Principles Study

2019 ◽  
Vol 16 (2) ◽  
pp. 77 ◽  
Author(s):  
Muhammad Zamir Mohyedin ◽  
Afiq Radzwan ◽  
Mohammad Fariz Mohamad Taib ◽  
Rosnah Zakaria ◽  
Nor Kartini Jaafar ◽  
...  
Keyword(s):  
Electronic Properties ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
Computer Code ◽  
First Principles Calculation ◽  
Generalized Gradient ◽  
Exchange Correlation ◽  
Percentage Difference ◽  
Structural And Electronic Properties

Bi2Se3 is one of the promising materials in thermoelectric devices and very useful out of environmental concern due to its efficiency to perform at room temperature. Based on the first-principles calculation of density functional theory (DFT) by using CASTEP computer code, structural and electronic properties of Bi2Se3 were investigated. The calculation is conducted within the exchange-correlation of local density approximation (LDA) and generalized gradient approximation within the revision of Perdew-Burke-Ernzerhof (GGA-PBE) functional. It was found that the results are consistent with previous works of theoretical study with small percentage difference. LDA exchange-correlation functional method is more accurate and have a better agreement than GGA-PBE to describe the structural properties of Bi2Se3 which consist of lattice parameters. LDA functional also shown more accurate electronic structure of Bi2Se3 that consist of band structure and density of states (DOS) which consistent with most previous theoretical works with small percentage difference. This study proves the reliability of CASTEP computer code and show LDA exchange-correlation functional is more accurate in describing the nature of Bi2Se3 compared to the other functionals.

scholarly journals Insight into Physical and Thermodynamic Properties of X3Ir (X = Ti, V, Cr, Nb and Mo) Compounds Influenced by Refractory Elements: A First-Principles Calculation

Crystals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 104 ◽  
Author(s):  
Dong Chen ◽  
Jiwei Geng ◽  
Yi Wu ◽  
Mingliang Wang ◽  
Cunjuan Xia
Keyword(s):  
Thermodynamic Properties ◽  
First Principles ◽  
Density Functional ◽  
Local Density ◽  
First Principles Calculation ◽  
Generalized Gradient ◽  
Functional Theory ◽  
Debye Temperatures ◽  
Experimental Parameters ◽  
Experimental Values

The effects of refractory metals on physical and thermodynamic properties of X3Ir (X = Ti, V, Cr, Nb and Mo) compounds were investigated using local density approximation (LDA) and generalized gradient approximation (GGA) methods within the first-principles calculations based on density functional theory. The optimized lattice parameters were both in good compliance with the experimental parameters. The GGA method could achieve an improved structural optimization compared to the LDA method, and thus was utilized to predict the elastic, thermodynamic and electronic properties of X3Ir (X = Ti, V, Cr, Nb and Mo) compounds. The calculated mechanical properties (i.e., elastic constants, elastic moduli and elastic anisotropic behaviors) were rationalized and discussed in these intermetallics. For instance, the derived bulk moduli exhibited the sequence of Ti3Ir < Nb3Ir < V3Ir < Cr3Ir < Mo3Ir. This behavior was discussed in terms of the volume of unit cell and electron density. Furthermore, Debye temperatures were derived and were found to show good consistency with the experimental values, indicating the precision of our calculations. Finally, the electronic structures were analyzed to explain the ductile essences in the iridium compounds.

High Pressure Elasticity of MgSiO3 Perovskite, MgO and SiO2

1997 ◽  
Vol 499 ◽  
Author(s):  
Bijaya B. Karki
Keyword(s):  
High Pressure ◽  
First Principles ◽  
Lower Mantle ◽  
Elastic Moduli ◽  
Local Density ◽  
Initial Pressure ◽  
Structural Transformations ◽  
Wave Velocities ◽  
Mgsio3 Perovskite ◽  
Shear Wave Velocities

ABSTRACTFull elastic constant tensors (cij) of three minerals namely, MgSiO3 perovskite, MgO and SiO2, are obtained as a function of pressure up to 140 GPa using first-principles computer simulations based on the local density and pseudopotential approximations. The zero pressure values and initial pressure dependence of athermal elastic constants derived from stress-strain relations are in excellent agreement with available experimental data. We find that elastic moduli, wave velocities and anisotropy of the minerals are strongly pressure dependent, particularly, in the vicinity of the structural transformations. In the view of the present experimental limitations at realistic conditions of the inner Earth, our results for high pressure elasticity are expected to be of substantial geophysical significance. Comparisons based on compressional and shear wave velocities support the prevailing hypothesis of Mg-rich silicate perovskite dominated composition for the lower mantle.

Structural, elastic and thermodynamic properties of A15-type compounds V3X (X = Ir, Pt and Au) from first-principles calculations

2016 ◽  
Vol 30 (35) ◽  
pp. 1650414 ◽  
Author(s):  
Mingliang Wang ◽  
Zhe Chen ◽  
Dong Chen ◽  
Cunjuan Xia ◽  
Yi Wu
Keyword(s):  
Thermodynamic Properties ◽  
Debye Temperature ◽  
First Principles ◽  
Density Functional ◽  
Coefficient Of Thermal Expansion ◽  
Local Density ◽  
Debye Model ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Experimental Values

The structural, elastic and thermodynamic properties of the A15 structure V3Ir, V3Pt and V3Au were studied using first-principles calculations based on the density functional theory (DFT) within generalized gradient approximation (GGA) and local density approximation (LDA) methods. The results have shown that both GGA and LDA methods can process the structural optimization in good agreement with the available experimental parameters in the compounds. Furthermore, the elastic properties and Debye temperatures estimated by LDA method are typically larger than the GGA methods. However, the GGA methods can make better prediction with the experimental values of Debye temperature in V3Ir, V3Pt and V3Au, signifying the precision of the calculating work. Based on the E–V data derived from the GGA method, the variations of the Debye temperature, coefficient of thermal expansion and heat capacity under pressure ranging from 0 GPa to 50 GPa and at temperature ranging from 0 K to 1500 K were obtained and analyzed for all compounds using the quasi-harmonic Debye model.

First-Principles Investigation on Elastic Constants of TiN under High Pressure

2013 ◽  
Vol 802 ◽  
pp. 109-113
Author(s):  
Kittiya Prasert ◽  
Pitiporn Thanomngam ◽  
Kanoknan Sarasamak
Keyword(s):  
Elastic Constants ◽  
First Principles ◽  
Local Density ◽  
Ambient Pressure ◽  
Lattice Parameter ◽  
First Principles Calculations ◽  
Generalized Gradient ◽  
Generalized Gradient Approximation ◽  
Shear Distortion ◽  
Calculated Lattice Parameter

Elastic constants of NaCl-type TiN under pressure were investigated by first-principles calculations within both local density approximation (LDA) and Perdew-Burke-Ernzerhof generalized-gradient approximation (PBE-GGA). At ambient pressure, the calculated lattice parameter, bulk modulus, and elastic constants of NaCl-type TiN are in well agreement with other available values. Under pressure, all elastic constants,C11,C12, andC44, are found to increase with pressure.C11, which is related to the longitudinal distortion, increases rapidly with pressure whileC12andC44which are related to the transverse and shear distortion, respectively, are much less sensitive to pressure.

Sign in / Sign up

Export Citation Format

Share Document