scholarly journals Optimization of Culture Conditions and Production of Bio-Fungicides from Trichoderma Species under Solid-State Fermentation Using Mathematical Modeling

2021 ◽  
Vol 9 (8) ◽  
pp. 1675
Author(s):  
Afrasa Mulatu ◽  
Tesfaye Alemu ◽  
Negussie Megersa ◽  
Ramesh R. Vetukuri

Agro-industrial wastes suitable for economical and high mass production of novel Trichoderma species under solid-state fermentation were identified by optimizing the culture conditions using a mathematical model and evaluating the viability of the formulated bio-product. Fourteen inexpensive, locally available, organic substrates and cereals were examined using a one-factor-at-a-time experiment. The fungus colonized nearly all substrates after 21 days of incubation, although the degree of colonization and conidiation varied among the substrates. A mixture of wheat bran and white rice (2:1 w/w) was found to support maximum growth of T. asperellum AU131 (3.2 × 107 spores/g dry substrate) and T. longibrachiatum AU158 (3.5 × 107 spores/g dry substrate). Using a fractional factorial design, the most significant growth factors influencing biomass production were found to be temperature, moisture content, inoculum concentration, and incubation period (p ≤ 0.05). Analysis of variance of a Box–Behnken design showed that the regression model was highly significant (p ≤ 0.05) with F-values of 10.38 (P = 0.0027, T. asperellum AU131) and 12.01 (p < 0.0017, T. longibrachiatum AU158). Under optimal conditions, maximum conidia yield of log10 (8.6) (T. asperellum AU131) and log10(9.18) (T. longibrachiatum) were obtained. For wettable powder Trichoderma species formulations, it was possible to maintain conidial viability at room temperature (25 °C) for eight months at concentrations above 106 CFU/g.

2019 ◽  
Vol 3 (2) ◽  
pp. 71-77
Author(s):  
Rosa Dorta-Vásquez ◽  
Oscar Valbuena ◽  
Domenico Pavone-Maniscalco

Abstract Paper production generates large quantities of a solid waste known as papermaking sludge (PS), which needs to be handled properly for final disposal. The high amount of this byproduct creates expensive economical costs and induces environmental and ecological risks. Therefore, it is necessary to search uses for PS, in order to reduce the negative environmental impact and to generate a more valuable byproduct. Due to the cellulolytic composition of PS, this work evaluated a solid state fermentation process using it as substrate to obtain spores of the fungus Trichoderma asperellum. Optimal conditions to obtain T. asperellum spores were: 60% water content, 3% (w/w) salts (Nutrisol P® and Nutrisol K®), inoculum concentration at 1x105 spores/g, and pasteurized or sterilized PS. Under these conditions it was possible to obtain 2.37x109 spores/g. T. asperellum spores applied directly to pepper (Capsicum anuum) seeds without PS increased significantly seedling dry mass in greenhouse assays. This work suggests an alternative, economic and abundant substrate for production of T. asperellum spores.


2011 ◽  
Vol 2011 ◽  
pp. 1-9 ◽  
Author(s):  
Aline Machado de Castro ◽  
Mariana Martins Pereira Teixeira ◽  
Daniele Fernandes Carvalho ◽  
Denise Maria Guimarães Freire ◽  
Leda dos Reis Castilho

This work aimed at investigating the simultaneous production of amylases and proteases by solid-state fermentation (SSF) of babassu cake using Aspergillus awamori IOC-3914. By means of experimental design techniques and the desirability function, optimum inoculum conditions (C/N ratio of propagation medium, inoculum age, and concentration of inoculum added to SSF medium) for the production of both groups of enzymes were found to be 25.8, 28.4 h, and 9.1 mg g−1, respectively. Significant influence of both initial C/N ratio and inoculum concentration was observed. Optimum amylolytic activities predicted by this multiresponse analysis were validated by independent experiments, thus indicating the efficacy of this approach.


2018 ◽  
Vol 37 (2) ◽  
pp. 149-156 ◽  
Author(s):  
C. Marzo ◽  
A.B. Díaz ◽  
I. Caro ◽  
A. Blandino

Nowadays, significant amounts of agro-industrial wastes are discarded by industries; however, they represent interesting raw materials for the production of high-added value products. In this regard, orange peels (ORA) and exhausted sugar beet cossettes (ESBC) have turned out to be promising raw materials for hydrolytic enzymes production by solid state fermentation (SSF) and also a source of sugars which could be fermented to different high-added value products. The maximum activities of xylanase and exo-polygalacturonase (exo-PG) measured in the enzymatic extracts obtained after the SSF of ORA were 31,000 U·kg-1 and 17,600 U·kg-1, respectively; while for ESBC the maximum values reached were 35,000 U·kg-1 and 28,000 U·kg-1, respectively. The enzymatic extracts obtained in the SSF experiments were also employed for the hydrolysis of ORA and ESBC. Furthermore, it was found that extracts obtained from SSF of ORA, supplemented with commercial cellulase, were more efficient for the hydrolysis of ORA and ESBC than a commercial enzyme cocktail typically used for this purpose. In this case, maximum reducing sugars concentrations of 57 and 47 g·L-1 were measured after the enzymatic hydrolysis of ESBC and ORA, respectively.


2013 ◽  
Vol 39 (1) ◽  
pp. 43-51 ◽  
Author(s):  
Kumkum Azad ◽  
Md. Abdul Halim ◽  
Feroza Hossain

Two thermophilic fungi, Thermomyces lanuginosus BPJ-10 and Rhizomucor pusillus BPJ-2 were studied under solid state fermentation (SSF) using wheat bran for the production of thermostable xylanase. The optimum time required for the production of xylanase was found to be 4 days and 7 days for R. pusillus BPJ-2 and T. lanuginosus BPJ-10 respectively. The optimum temperatures for the production of xylanase by R. pusillus BPJ-2 and T. lanuginosus BPJ-10 were 45°C and 50°C respectively. The maximum activity of xylanase (1.685 IU/ml and 0.075 IU/ml) was exhibited by T. lanuginosus BPJ-10 and R. pusillus BPJ-2 at pH 7.0 and pH 4.0 respectively. The optimum moisture content for maximum xylanase production was 90% for both fungi. J. Asiat. Soc. Bangladesh, Sci. 39(1): 43-51, June 2013 DOI: http://dx.doi.org/10.3329/jasbs.v39i1.16032


2020 ◽  
Vol 11 (12) ◽  
pp. 6667-6675 ◽  
Author(s):  
Xiaoqing Ding ◽  
Lei Yao ◽  
Yong Hou ◽  
Yanbin Hou ◽  
Genliang Wang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document