scholarly journals Diversity and Abundance of Microbial Communities in UASB Reactors during Methane Production from Hydrolyzed Wheat Straw and Lucerne

2020 ◽  
Vol 8 (9) ◽  
pp. 1394
Author(s):  
Tong Liu ◽  
Anna Schnürer ◽  
Johanna Björkmalm ◽  
Karin Willquist ◽  
Emma Kreuger
Keyword(s):  
Microbial Community ◽  
Wheat Straw ◽  
Archaeal Community ◽  
Biofuel Production ◽  
Upflow Anaerobic Sludge Blanket ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
The European Union ◽  
Caldicellulosiruptor Saccharolyticus ◽  
Uasb Reactors

The use of straw for biofuel production is encouraged by the European Union. A previous study showed the feasibility of producing biomethane in upflow anaerobic sludge blanket (UASB) reactors using hydrolyzed, steam-pretreated wheat straw, before and after dark fermentation with Caldicellulosiruptor saccharolyticus, and lucerne. This study provides information on overall microbial community development in those UASB processes and changes related to acidification. The bacterial and archaeal community in granular samples was analyzed using high-throughput amplicon sequencing. Anaerobic digestion model no. 1 (ADM1) was used to predict the abundance of microbial functional groups. The sequencing results showed decreased richness and diversity in the microbial community, and decreased relative abundance of bacteria in relation to archaea, after process acidification. Canonical correspondence analysis showed significant negative correlations between the concentration of organic acids and three phyla, and positive correlations with seven phyla. Organic loading rate and total COD fed also showed significant correlations with microbial community structure, which changed over time. ADM1 predicted a decrease in acetate degraders after a decrease to pH ≤ 6.5. Acidification had a sustained effect on the microbial community and process performance.

Toxicity of Sodium and Potassium Ions on Performance of UASB System

2014 ◽  
Vol 953-954 ◽  
pp. 1105-1108 ◽  
Author(s):  
Seni Karnchanawong ◽  
Kraiwet Kabtum
Keyword(s):  
Biogas Production ◽  
Cod Removal ◽  
Upflow Anaerobic Sludge Blanket ◽  
Synthetic Wastewater ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Working Volume ◽  
Anaerobic Sludge Blanket ◽  
Uasb Reactors ◽  
Sodium And Potassium

The objective of this study was to investigate the toxicity of Na+and K+ions on performance of upflow anaerobic sludge blanket (UASB) system. Three laboratory-scale UASB reactors, 15.8 - l working volume, were employed with 1 reactor operated as control. They were loaded at organic loading rate (OLR) of 5 kg COD/(m3-d), treating synthetic wastewater with COD concentration ~ 5000 mg/l. Na+and K+ions were added in the range of 1010 - 7180 and 41 - 7320 mg/l, respectively. No toxicity was observed at influent Na+and K+concentrations up to 3340 and 2750 mg/l, respectively. Slight inhibitions on COD removal were founded at Na+and K+concentrations of 4610 and 3920 mg/l, respectively, but moderate effect on biogas production had occurred. When Na+and K+concentrations were increased to 7180 and 7320 mg/l, respectively, strong inhibitions were observed with COD removal dropped to 45.5 and 48.8 %, respectively. Ratios of biogas productions, as compared to the control reactor, were dropped to 0.31 and 0.32, respectively. Increasing cation concentrations had more detrimental effect on biogas production than COD removal.

Modeling simultaneous removal of primary substrates and chlorinated phenols in upflow anaerobic sludge blanket reactors

2001 ◽  
Vol 28 (6) ◽  
pp. 910-921 ◽  
Author(s):  
K J Kennedy ◽  
Z Ning ◽  
L Fernandes
Keyword(s):  
Dynamic Model ◽  
Model Development ◽  
Oxygen Demand ◽  
Upflow Anaerobic Sludge Blanket ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Chlorinated Phenols ◽  
Degradation Rates ◽  
Anaerobic Sludge Blanket ◽  
Uasb Reactors

A dynamic model describing the simultaneous degradation of easily degradable substrates (sucrose and acetic acid (HAc)) and 2,4-dichlorophenol (2,4-DCP) in upflow anaerobic sludge blanket (UASB) reactors was developed. The two critical factors considered in the model development were sorption and substrate interaction during degradation. Data obtained from experiments on the multiple substrate degradation in continuous UASB reactors were used to validate and verify the dynamic model. The model predicts the system responses for 2,4-DCP, 4-monochlorophenol (4-MCP), HAc, propionic acid (HPr), and chemical oxygen demand (COD) concentration in the effluent. The modeling results indicated that the degradation rates for 2,4-DCP and for cosubstrates, HAc and HPr, changed inversely as a function of the specific organic loading rate for UASB reactors.Key words: dynamic, modeling, UASB, 2,4-dichlorophenol, sorption, degradation, co-metablism.

The use of upflow anaerobic sludge blanket reactors in the treatment of poultry slaughterhouse wastewater

2001 ◽  
Vol 44 (4) ◽  
pp. 83-88 ◽  
Author(s):  
V. Del Nery ◽  
M. H.Z. Damianovic ◽  
F. G. Barros
Keyword(s):  
Loading Rate ◽  
Upflow Anaerobic Sludge Blanket ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Dissolved Air Flotation ◽  
Slaughterhouse Wastewater ◽  
Cod Reduction ◽  
Start Up ◽  
Anaerobic Sludge Blanket ◽  
Uasb Reactors

This work studied the performance of the dissolved air flotation (DAF) system and the start-up and the operation of two 450 m3 UASB reactors in a poultry slaughterhouse in Sorocaba, Brazil. The DAF presented reduction efficiency of grease and fats, suspended solids and COD 50% higher. The reactors were seeded with non-adapted sludge. The average COD of the reactor influent was 2,695mg/L; and the initial organic loading rate (OLR) and the initial sludge loading rate at the start-up were 0.51 kg COD/m3.day and 0.04 kg COD/kg VTS.day, respectively. The start-up period was 144 days. During this time the reactor flow rate and OLR were gradually increased. At the reactor start-up, the maximum OLR value was 2.1 kg COD/m3.day, the COD reduction was higher than 80%, and the concentration of volatile fatsty acids (VFA) was below 100mg/L. The COD reductions, considering the reactor effluent raw COD and soluble COD were similar throughout the period studied in both reactors. The reactor effluent raw COD was approximately 10% higher than the soluble COD until the 225th day of operation. From the 225th day of operation this value increased 20%-30% due to the sludge washout. The effluent soluble COD reduction, the effluent VFA concentration and the operational stability attested the good performance of UASB reactors in poultry slaughterhouse wastewater treatment.

scholarly journals Performance of UASB reactors in two stages under different HRT and OLR treating residual waters of swine farming

2013 ◽  
Vol 33 (2) ◽  
pp. 367-378 ◽  
Author(s):  
Estevão Urbinati ◽  
Rose M. Duda ◽  
Roberto A. de Oliveira
Keyword(s):  
Oxygen Demand ◽  
Pilot Scale ◽  
Anaerobic Treatment ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
In Series ◽  
Two Stages ◽  
Uasb Reactors

In this study it was evaluated the effects of hydraulic retention time (HRT) and Organic Loading Rate (OLR) on the performance of UASB (Upflow Anaerobic Sludge Blanket) reactors in two stages treating residual waters of swine farming. The system consisted of two UASB reactors in pilot scale, installed in series, with volumes of 908 and 188 L, for the first and second stages (R1 and R2), respectively. The HRT applied in the system of anaerobic treatment in two stages (R1 + R2) was of 19.3, 29.0 and 57.9 h. The OLR applied in the R1 ranged from 5.5 to 40.1 kg CODtotal (m³ d)-1. The average removal efficiencies of chemical oxygen demand (COD) and total suspended solids (TSS) ranged, respectively, from 66.3 to 88.2% and 62.5 to 89.3% in the R1, and from 85.5 to 95.5% and 76.4 to 96.1% in the system (R1 + R2). The volumetric production of methane in the system (R1 + R2) ranged from 0.295 to 0.721 m³CH4 (m³ reactor d)-1. It was found that the OLR applied were not limiting to obtain high efficiencies of CODtotal and TSS removal and methane production. The inclusion of the UASB reactor in the second stage contributed to increase the efficiencies of CODtotal and TSS removal, especially, when the treatment system was submitted to the lowest HRT and the highest OLR.

scholarly journals Performance Comparison of Conventional and Modified Upflow Anaerobic Sludge Blanket (UASB) Reactors Treating High-Strength Cattle Slaughterhouse Wastewater

Water ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 806 ◽  
Author(s):  
Mohammed Ali Musa ◽  
Syazwani Idrus ◽  
Hasfalina Che Man ◽  
Nik Norsyahariati Nik Daud
Keyword(s):  
Oxygen Demand ◽  
High Strength ◽  
Performance Comparison ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
Slaughterhouse Wastewater ◽  
Anaerobic Sludge Blanket ◽  
Uasb Reactors

Cattle slaughterhouse wastewater (CSWW) with an average chemical oxygen demand (COD) and biochemical oxygen demand of 32,000 mg/L and 17,000 mg/L, respectively, can cause a severe environmental hazard if discharged untreated. Conventional upflow anaerobic sludge blanket (UASB) reactor is used in the treatment of slaughterhouse wastewater to meet the discharge standard limit of wastewater discharge set by the Department of Environment Malaysia (DOE). However, at higher loading rates the conventional systems are characterized by slow-growing microorganism resulting in long startup period, surface scum formation, and sludge washout. In this work, the performance of two laboratory scale (12 L) conventional (R1) and modified (R2) UASB reactors treating CSWW at mesophilic (36 ± 1 °C) condition were investigated. Both reactors were subjected to increasing organic loading rate (OLR) from 1.75 to 32 g L−1 day−1. The average COD, BOD5, and TSS removal efficiencies were ˃90%, at an OLR between 1.75 to 5 g L−1 day−1. The study revealed that R1 drastically reduced to 50, 53, and 43% with increasing OLR until 16 g L−1 day−1, whereas R2 maintained 76, 77, and 88% respectively, under the same OLR. Sign of reactor instability was very much pronounced in R1, showing poorly active Methanosaeta spp., whereas R2 showed a predominantly active Methanosarcina spp.

Nitrite reduction and methanogenesis in a single-stage UASB reactor

2015 ◽  
Vol 72 (12) ◽  
pp. 2236-2242 ◽  
Author(s):  
L. I. Borges ◽  
C. M. López-Vazquez ◽  
H. García ◽  
J. B. van Lier
Keyword(s):  
Domestic Wastewater ◽  
High Strength ◽  
Single Stage ◽  
Nitrite Reduction ◽  
Upflow Anaerobic Sludge Blanket ◽  
Uasb Reactor ◽  
Organic Loading Rate ◽  
Anaerobic Sludge ◽  
N Removal

In this study, nitrite reduction and methanogenesis in a single-stage upflow anaerobic sludge blanket (UASB) reactor was investigated, using high-strength synthetic domestic wastewater as substrate. To assess long-term effects and evaluate the mechanisms that allow successful nitrite reduction and methanogenesis in a single-stage UASB, sludge was exposed to relatively high nitrite loading rates (315 ± 13 mgNO2−-N/(l.d)), using a chemical oxygen demand (COD) to nitrogen ratio of 18 gCOD/gNO2−-N, and an organic loading rate of 5.4 ± 0.2 gCOD/(l.d). In parallel, the effects of sludge morphology on methanogenesis inhibition were studied by performing short-term batch activity tests at different COD/NO2−-N ratios with anaerobic sludge samples. In long-term tests, denitrification was practically complete and COD removal efficiency did not change significantly after nitrite addition. Furthermore, methane production only decreased by 13%, agreeing with the reducing equivalents requirement for complete NO2− reduction to N2. Apparently, the spatial separation of denitrification and methanogenesis zones inside the UASB reactor allowed nitrite reduction and methanogenesis to occur at the same moment. Batch tests showed that granules seem to protect methanogens from nitrite inhibition, probably due to transport limitations. Combined COD and N removal via nitrite in a single-stage UASB reactor could be a feasible technology to treat high-strength domestic wastewater.

Improved nitrogen removal in upflow anaerobic sludge blanket (UASB) reactors by incorporation of Anammox bacteria into the granular sludge

2004 ◽  
Vol 49 (11-12) ◽  
pp. 69-76 ◽  
Author(s):  
J.E. Schmidt ◽  
D.J. Batstone ◽  
I. Angelidaki
Keyword(s):  
In Situ Hybridisation ◽  
Granular Sludge ◽  
Ammonia Removal ◽  
Appropriate Technology ◽  
Upflow Anaerobic Sludge Blanket ◽  
Anaerobic Sludge ◽  
The Third ◽  
Anammox Activity ◽  
Anaerobic Sludge Blanket ◽  
Uasb Reactors

Upflow anaerobic sludge blanket reactors may offer a number of advantages over conventional mixed-tank, SBR, and biofilm reactors, including high space-loading, low footprint, and resistance to shocks and toxins. In this study, we assessed the use of upflow anaerobic sludge blanket (UASB) reactor technology as applied to anaerobic ammonia removal, or Anammox. Four 200 ml UASB reactors were inoculated with 50% (by volume) anaerobic granular sludge and 50% flocular sludge from different sources (all with the potential for containing Anammox organisms). Tools used to assess the reactors included basic analyses, fluorescent in-situ hybridisation, and mathematical modelling, with statistical non-linear parameter estimation. Two of the reactors showed statistically identical Anammox activity (i.e., identical kinetic parameters), with good ammonia and nitrite removal (0.14 kgNHx m-3 reactor day-1, with 99% ammonia removal). The third reactor also demonstrated significant Anammox activity, but with poor identifiability of parameters. The fourth reactor had no statistical Anammox activity. Modelling indicated that poor identifiability and performance in the third and fourth reactors were related to an excess of reduced carbon, probably originating in the inoculum. Accumulation of Anammox organisms was confirmed both by a volume loading much lower than the growth rate, and response to a probe specific for organisms previously reported to mediate Anammox processes. Overall, the UASB reactors were effective as Anammox systems, and identifiability of the systems was good, and repeatable (even compared to a previous study in a rotating biological contactor). This indicates that operation, design, and analysis of Anammox UASB reactors specifically, and Anammox systems in general, are reliable and portable, and that UASB systems are an appropriate technology for this process.

Sign in / Sign up

Export Citation Format

Share Document