scholarly journals Biomineralization by Extremely Halophilic and Metal-Tolerant Community Members from a Sulfate-Dominated Metal-Rich Environment

2021 ◽  
Vol 10 (1) ◽  
pp. 79
Author(s):  
Marie Harpke ◽  
Sebastian Pietschmann ◽  
Flávio Silva Costa ◽  
Clara Gansert ◽  
Falko Langenhorst ◽  
...  

The adaptation to adverse environmental conditions can lead to adapted microbial communities that may be screened for mechanisms involved in halophily and, in this case, metal tolerance. At a former uranium mining and milling site in Seelingstädt, Germany, microbial communities from surface waters and sediment soils were screened for isolates surviving high salt and metal concentrations. The high salt contents consisted mainly of chloride and sulfate, both in soil and riverbed sediment samples, accompanied by high metal loads with presence of cesium and strontium. The community structure was dominated by Chloroflexi, Proteobacteria and Acidobacteriota, while only at the highest contaminations did Firmicutes and Desulfobacterota reach appreciable percentages in the DNA-based community analysis. The extreme conditions providing high stress were mirrored by low numbers of cultivable strains. Thirty-four extremely halotolerant bacteria (23 Bacillus sp. and another 4 Bacillales, 5 Actinobacteria, and 1 Gamma-Proteobacterium) surviving 25 to 100 mM SrCl2, CsCl, and Cs2SO4 were further analyzed. Mineral formation of strontium- or cesium-struvite could be observed, reducing bioavailability and thereby constituting the dominant metal and salt resistance strategy in this environment.

2004 ◽  
Vol 49 (11-12) ◽  
pp. 327-336 ◽  
Author(s):  
S. Wuertz ◽  
S. Okabe ◽  
M. Hausner

Several important advances have been made in the study of biofilm microbial populations relating to their spatial structure (or architecture), their community structure, and their dependence on physicochemical parameters. With the knowledge that hydrodynamic forces influence biofilm architecture came the realization that metabolic processes may be enhanced if certain spatial structures can be forced. An example is the extent of plasmid-mediated horizontal gene transfer in biofilms. Recent in situ work in defined model systems has shown that the biofilm architecture plays a role for genetic transfer by bacterial conjugation in determining how far the donor cells can penetrate the biofilm. Open channels and pores allow for more efficient donor transport and hence more frequent cell collisions leading to rapid spread of the genes by horizontal gene transfer. Such insight into the physical environment of biofilms can be utilized for bioenhancement of catabolic processes by introduction of mobile genetic elements into an existing microbial community. If the donor organisms themselves persist, bioaugmentation can lead to successful establishment of newly introduced species and may be a more successful strategy than biostimulation (the addition of nutrients or specific carbon sources to stimulate the authochthonous population) as shown for an enrichment culture of nitrifying bacteria added to rotating disk biofilm reactors using fluorescent in situ hybridization (FISH) and microelectrode measurements of NH4+, NO2-, NO3-, and O2. However, few studies have been carried out on full-scale systems. Bioaugmentation and bioenhancement are most successful if a constant selective pressure can be maintained favoring the promulgation of the added enrichment culture. Overall, knowledge gain about microbial community interactions in biofilms continues to be driven by the availability of methods for the rapid analysis of microbial communities and their activities. Molecular tools can be grouped into those suitable for ex situ and in situ community analysis. Non-spatial community analysis, in the sense of assessing changes in microbial populations as a function of time or environmental conditions, relies on general fingerprinting methods, like DGGE and T-RFLP, performed on nucleic acids extracted from biofilm. These approaches have been most useful when combined with gene amplification, cloning and sequencing to assemble a phylogenetic inventory of microbial species. It is expected that the use of oligonucleotide microarrays will greatly facilitate the analysis of microbial communities and their activities in biofilms. Structure-activity relationships can be explored using incorporation of 13C-labeled substrates into microbial DNA and RNA to identify metabolically active community members. Finally, based on the DNA sequences in a biofilm, FISH probes can be designed to verify the abundance and spatial location of microbial community members. This in turn allows for in situ structure/function analysis when FISH is combined with microsensors, microautoradiography, and confocal laser scanning microscopy with advanced image analysis.


2021 ◽  
Author(s):  
Laura Vega ◽  
Jesús Jaimes ◽  
Duvan Morales ◽  
David Martínez ◽  
Lissa Cruz-Saavedra ◽  
...  

Author(s):  
Xingliang Li ◽  
Minji Li ◽  
Beibei Zhou ◽  
Yuzhang Yang ◽  
Jia Zhou ◽  
...  

2013 ◽  
Vol 80 (1) ◽  
pp. 177-183 ◽  
Author(s):  
Lavane Kim ◽  
Eulyn Pagaling ◽  
Yi Y. Zuo ◽  
Tao Yan

ABSTRACTThe impact of substratum surface property change on biofilm community structure was investigated using laboratory biological aerated filter (BAF) reactors and molecular microbial community analysis. Two substratum surfaces that differed in surface properties were created via surface coating and used to develop biofilms in test (modified surface) and control (original surface) BAF reactors. Microbial community analysis by 16S rRNA gene-based PCR-denaturing gradient gel electrophoresis (DGGE) showed that the surface property change consistently resulted in distinct profiles of microbial populations during replicate reactor start-ups. Pyrosequencing of the bar-coded 16S rRNA gene amplicons surveyed more than 90% of the microbial diversity in the microbial communities and identified 72 unique bacterial species within 19 bacterial orders. Among the 19 orders of bacteria detected,BurkholderialesandRhodocyclalesof theBetaproteobacteriaclass were numerically dominant and accounted for 90.5 to 97.4% of the sequence reads, and their relative abundances in the test and control BAF reactors were different in consistent patterns during the two reactor start-ups. Three of the five dominant bacterial species also showed consistent relative abundance changes between the test and control BAF reactors. The different biofilm microbial communities led to different treatment efficiencies, with consistently higher total organic carbon (TOC) removal in the test reactor than in the control reactor. Further understanding of how surface properties affect biofilm microbial communities and functional performance would enable the rational design of new generations of substrata for the improvement of biofilm-based biological treatment processes.


2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Allucia L. Shokane ◽  
Hanna Nel

Natural hazards disrupt the daily lives of people and communities. Consequently, social workers, like any other stakeholders, deal with community predicaments arising from the effects of natural hazards. The social relief distress (SRD) programme of government utilises needs-based, top-down government-driven interventions in communities affected by natural hazards, focused on what communities lack, as opposed to what communities have. This research study involved a community that experienced natural hazards, such as flooding, hail, lightning and windstorms, which destroyed property and livelihoods during the period 2014–2015. Eight experts and 12 affected community members participated in a qualitative participatory action research analysis study between 2016 and 2017. Guided by the asset-based community development (ABCD) approach, the affected community participated in a collaborative manner in the analysis of the consequences of natural hazards within the community. Data were collected through semi-structured individual interviews and focus group discussions, and analysed thematically. The findings confirmed the traumatic effects of natural hazards, such as loss of property, crops and livestock, physical injuries and even death. The main finding established that natural hazards should be managed in a collaborative way between formal experts of natural hazards and community members through ABCD principles and methods in building resilient communities.


2020 ◽  
Author(s):  
Jeffrey Marlow ◽  
Rachel Spietz ◽  
Keun-Young Kim ◽  
Mark Ellisman ◽  
Peter Girguis ◽  
...  

AbstractCoastal salt marshes are key sites of biogeochemical cycling and ideal systems in which to investigate the community structure of complex microbial communities. Here, we clarify structural-functional relationships among microorganisms and their mineralogical environment, revealing previously undescribed metabolic activity patterns and precise spatial arrangements within salt marsh sediment. Following 3.7-day in situ incubations with a non-canonical amino acid that was incorporated into new biomass, samples were embedded and analyzed by correlative fluorescence and electron microscopy to map the microscale arrangements of anabolically active and inactive organisms alongside mineral grains. Parallel sediment samples were examined by fluorescence-activated cell sorting and 16S rRNA gene sequencing to link anabolic activity to taxonomic identity. Both approaches demonstrated a rapid decline in the proportion of anabolically active cells with depth into salt marsh sediment, from ∼60% in the top cm to 10-25% between 2-7 cm. From the top to the bottom, the most prominent active community members shifted from sulfur cycling phototrophic consortia, to sulfate-reducing bacteria likely oxidizing organic compounds, to fermentative lineages. Correlative microscopy revealed more abundant (and more anabolically active) organisms around non-quartz minerals including rutile, orthoclase, and plagioclase. Microbe-mineral relationships appear to be dynamic and context-dependent arbiters of biogeochemical cycling.Statement of SignificanceMicroscale spatial relationships dictate critical aspects of a microbiome’s inner workings and emergent properties, such as evolutionary pathways, niche development, and community structure and function. However, many commonly used methods in microbial ecology neglect this parameter – obscuring important microbe-microbe and microbe-mineral interactions – and instead employ bulk-scale methodologies that are incapable of resolving these intricate relationships.This benchmark study presents a compelling new approach for exploring the anabolic activity of a complex microbial community by mapping the precise spatial configuration of anabolically active organisms within mineralogically heterogeneous sediment through in situ incubation, resin embedding, and correlative fluorescence and electron microscopy. In parallel, active organisms were identified through fluorescence-activated cell sorting and 16S rRNA gene sequencing, enabling a powerful interpretive framework connecting location, identity, activity, and putative biogeochemical roles of microbial community members.We deploy this novel approach in salt marsh sediment, revealing quantitative insights into the fundamental principles that govern the structure and function of sediment-hosted microbial communities. In particular, at different sediment horizons, we observed striking changes in the proportion of anabolically active cells, the identities of the most prominent active community members, and the nature of microbe-mineral affiliations. Improved approaches for understanding microscale ecosystems in a new light, such as those presented here, reveal environmental parameters that promote or constrain metabolic activity and clarify the impact that microbial communities have on our world.


1998 ◽  
Vol 64 (2) ◽  
pp. 721-732 ◽  
Author(s):  
Søren Møller ◽  
Claus Sternberg ◽  
Jens Bo Andersen ◽  
Bjarke Bak Christensen ◽  
Juan Luis Ramos ◽  
...  

ABSTRACT Microbial communities growing in laboratory-based flow chambers were investigated in order to study compartmentalization of specific gene expression. Among the community members studied, the focus was in particular on Pseudomonas putida and a strain of anAcinetobacter sp., and the genes studied are involved in the biodegradation of toluene and related aromatic compounds. The upper-pathway promoter (Pu) and themeta-pathway promoter (Pm) from the TOL plasmid were fused independently to the gene coding for the green fluorescent protein (GFP), and expression from these promoters was studied inP. putida, which was a dominant community member. Biofilms were cultured in flow chambers, which in combination with scanning confocal laser microscopy allowed direct monitoring of promoter activity with single-cell spatial resolution. Expression from thePu promoter was homogeneously induced by benzyl alcohol in both community and pure-culture biofilms, while the Pmpromoter was induced in the mixed community but not in a pure-culture biofilm. By sequentially adding community members, induction ofPm was shown to be a consequence of direct metabolic interactions between an Acinetobacter species and P. putida. Furthermore, in fixed biofilm samples organism identity was determined and gene expression was visualized at the same time by combining GFP expression with in situ hybridization with fluorescence-labeled 16S rRNA targeting probes. This combination of techniques is a powerful approach for investigating structure-function relationships in microbial communities.


2019 ◽  
Vol 7 (12) ◽  
pp. 662 ◽  
Author(s):  
Luca Nerva ◽  
Chiara Pagliarani ◽  
Massimo Pugliese ◽  
Matteo Monchiero ◽  
Solène Gonthier ◽  
...  

The reduction of antimicrobial treatments and mainly the application of environmentally friendly compounds, such as resistance elicitors, is an impelling challenge to undertake more sustainable agriculture. We performed this research to study the effectiveness of non-conventional compounds in reducing leaf fungal attack and to investigate whether they influence the grape phyllosphere. Pathogenicity tests were conducted on potted Vitis vinifera “Nebbiolo” and “Moscato” cultivars infected with the powdery mildew agent (Erysiphe necator) and treated with three elicitors. Differences in the foliar microbial community were then evaluated by community-level physiological profiling by using BiologTM EcoPlates, high throughput sequencing of the Internal Transcribed Spacer (ITS) region, and RNA sequencing for the viral community. In both cultivars, all products were effective as they significantly reduced pathogen development. EcoPlate analysis and ITS sequencing showed that the microbial communities were not influenced by the alternative compound application, confirming their specific activity as plant defense elicitors. Nevertheless, “Moscato” plants were less susceptible to the disease and presented different phyllosphere composition, resulting in a richer viral community, when compared with the “Nebbiolo” plants. The observed effect on microbial communities pointed to the existence of distinct genotype-specific defense mechanisms independently of the elicitor application.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Vanessa L. Brisson ◽  
Jennifer E. Schmidt ◽  
Trent R. Northen ◽  
John P. Vogel ◽  
Amélie C. M. Gaudin

Abstract Maize domestication and breeding have resulted in drastic and well documented changes in aboveground traits, but belowground effects on root system functioning and rhizosphere microbial communities remain poorly understood, despite their critical importance for nutrient and water acquisition. We investigated the rhizosphere microbial community composition and structure of ten Zea mays accessions along an evolutionary transect (two teosinte, three inbred maize lines, and five modern maize hybrids) grown in nutrient depleted soil from a low input agricultural system. Microbial community analysis revealed significant differences in community composition between soil compartments (proximal vs. distal rhizosphere) and between plant genetic groups (teosinte, inbred, and modern hybrid). Only a small portion of the microbial community was differentially selected across plant genetic groups: 3.7% of prokaryotic community members and 4.9% of fungal community members were significantly associated with a specific plant genetic group. Indicator species analysis showed the greatest differentiation between modern hybrids and the other two plant genetic groups. Co-occurrence network analysis revealed that microbial co-occurrence patterns of the inbred maize lines’ rhizosphere were significantly more similar to those of the teosintes than to the modern hybrids. Our results suggest that advances in hybrid development significantly impacted rhizosphere microbial communities and network assembly.


Sign in / Sign up

Export Citation Format

Share Document