scholarly journals Experimental Study on Diesel Engine Emission Characteristics Based on Different Exhaust Pipe Coating Schemes

Micromachines ◽  
2021 ◽  
Vol 12 (10) ◽  
pp. 1155
Author(s):  
Keqin Zhao ◽  
Diming Lou ◽  
Yunhua Zhang ◽  
Liang Fang ◽  
Yuanzhi Tang

The thermal insulation performance of exhaust pipes coated with various materials (basalt and glass fiber materials) under different braiding forms (sleeve, winding and felt types) and the effects on the emission characteristics of diesel engines were experimentally studied through engine bench tests. The results indicated that the thermal insulation performance of basalt fiber was higher than that of glass fiber, and more notably advantageous at the early stage of the diesel engine idle cold phase. The average temperature drop during the first 600 s of the basalt felt (BF) pipe was 2.6 °C smaller than that of the glass fiber felt (GF) pipe. Comparing the different braiding forms, the temperature decrease in the felt-type braided material was 2.6 °C and 2.9 °C smaller than that in the sleeve- and winding-type braided materials, respectively. The basalt material was better than the glass fiber material regarding the gaseous pollutant emission reduction performance, especially in the idling cold phase of diesel engines. The NOx conversion rate of the BF pipe was 7.4% higher than that of the GF pipe, and the hydrocarbon (HC) conversion rate was 2.3% higher than that of the GF pipe, while the CO conversion rate during the first 100 s was 24.5% higher than that of the GF pipe. However, the particulate matter emissions were not notably different.

Author(s):  
A. K. Babu ◽  
G. Devaradjane

The intent of this paper is to summarize the state of knowledge on use of vegetable oils as diesel fuels. Fuel related properties are reviewed and compared with conventional diesel fuel. The use of neat vegetable oil (edible and/or nonedible), biodiesel and its blends in a diesel engine has been discussed. Performance and emission characteristics are highlighted. Suitability of different combustion chambers for diesel engine operation with vegetable oils is outlined. Techniques to decrease viscosities are discussed. An overview on current developments on the use of vegetable oils directly and indirectly in diesel engines is presented.


2011 ◽  
Vol 127 ◽  
pp. 237-241
Author(s):  
Wen Ming Cheng ◽  
Jia Liu

Diesel engines are widely used in almost all walks of life and cannot be dispensed with in the near future, and common rail technology is now widely applied in diesel engines for its advantages. An experimental investigation is carried out to establish the emission characteristics of a common rail diesel engine fuelled with diesel and biodiesel produced from cottonseed oil. The emissions measured were carbon monoxide, hydrocarbon, oxides of nitrogen and smoke. From the results, it is found that most exhaust emissions encountered with conventional diesel fuel are reduced with biodiesel fuel, with the exception of nitrogen oxides. From the investigation it can be concluded that biodiesel can be used as an alternative to diesel in a common rail diesel engine without any engine modifications.


Author(s):  
Alex Y ◽  
Roji George Roy

Biodiesel has become more attractive recently, because of its environmental benefits and the fact that it is made from renewable resources. Over the past few decades, most of the countries depending on diesel engines for transportation. Some of its valuable advantages like highest thermal efficiency made it very popular. At the same time, the cost of diesel fuel is increasing, due to the depletion of fossil fuels. In this current scenario, we need an alternative fuel instead of diesel fuel. Many of the researchers have successfully placed several works on generating energy from different types of alternative sources including solar and some kind of conversion processes including renewable agricultural products into liquid fuel. One of the biggest challenges for developing countries in relation to energy consumption is to develop and implement technologies that help to improve efficiency of automobile engines, also to reduce the emissions of harmful gases and particulate matters. In order to avoid environmental impacts, emissions are reduced or eliminated by introducing renewable energy resources. The present research chronicles the production and testing of renewable biodiesel fuel derived from virgin coconut oil on a diesel engine, to analyses the engine performance and emission characteristics. In the first phase of work, production of biodiesel fuel from virgin coconut oil using transeterification process with two types of catalysts (homogenous and heterogeneous). The preliminary results shows that, with the addition of homogenous catalyst called Potassium Hydroxide (KOH) with methanol shows much higher activity than that of heterogeneous catalysts, and it shows more similar properties with diesel fuel. The results obtained from the chemical test and physicochemical properties of transesterified biodiesel fuel clearly proves the above-mentioned statement. The chemical tests such as GCMS and FT-IR clearly shows that the biodiesel fuel has sufficient amount of volatile components and functional groups. Then, physicochemical properties include, Fire point, Flashpoint, density, and viscosity were analyzed. Finally, Engine performance and Emission characteristics were analysed to confirm, whether this biodiesel fuel is suitable for diesel engines, without any engine modifications. It was found to be, the transesterified virgin coconut oil biodiesel has similar properties to that of the diesel fuel. From the physiochemical properties and engine performance clearly shows that, coconut oil biodiesel is suitable for diesel engine on blending, at a blending percentage level of 20% with conventional diesel fuel. Since the obtained transesterified biofuel can be used as an alternative fuel for diesel engines. The several journal reports and find outs from experimental investigation clearly depicts that the efficiency of the transesterified biofuel mainly depends upon the amount of catalyst adding and type of catalysts present in the biofuel, whether it is homogenous or heterogeneous catalyst is suitable with methanol. Finally, from the analysis made from biodiesel fuel. Coconut Oil Biodiesel fuel has less emission characteristics than that of the diesel fuels.


2021 ◽  
Vol 71 (1) ◽  
pp. 139-148
Author(s):  
Prasad K. Hari ◽  
Srinivasan C. Ananda ◽  
Kumar K. Praveen

Abstract Biodiesels from vegetable oils are also gaining momentum as a encouraging fuels which acts as alternative for agricultural diesel engines. Even though there is a slight penalty in the performance parameters by the usage of vegetable biodiesel fuels in diesel engines because of their high viscosity, there is considerable reduction in emissions which is dominant factor from the environmental perspective. In the present experimental work four fuels Canola (20% Canola oil plus 80% Diesel) biodiesel (B20C),Sesame (20% Sesame oil plus 80% Diesel) biodiesel (B20S), B20C blended with 5% n-butanol(B20C5B) and B20S is blended with 5% nbutanol(B20S5B) have tried as an alternative fuels to the Diesel. In the primitive stage tests were supervised on diesel engine with diesel. Thereafter in the second stage, tests were directed at identical operating conditions by using B20C, B20S and their blends as biodiesels. The engine important performance parameters brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC) and also the emission characteristics hydrocarbons (HC), carbon monoxide (CO), smoke opacity and nitrogen oxides (NOx) are evaluated. The results are contrasted with respect on base line data (diesel). From the experimental readings it was observed that the BTE of B20C, B20S, B20C5B and B20S5B at 100% load decreased by 2.64%,1.9 %,1.41% and 0.94% respectively, relative to diesel (D). At maximum loading condition BSFC for diesel,B20C,B20S,B20C5B and B20S5B are 0.254, 0.284,0.273,0.270 and 0.260kg/kWh. Overall, it is concluded that the emission characteristics of HC, CO and Smoke opacity are dropped for all tested biodiesels when compared to diesel fuel.


2020 ◽  
Vol 6 (2) ◽  
pp. 108-113 ◽  
Author(s):  
Kianoosh Shojae ◽  
Majid Mahdavian

Background: Vegetable oil of Fatty Acid Methyl Esters (FAME) that is obtained by triglycerides of transesterification in the presence of methanol, recently, has been highly regarded by scholars for use in diesel engines. These oils can be used as biodiesels in diesel engines and have various benefits (these fuels are renewable, biodegradable, and nontoxic). Objective: In this work, many studies are reviewed in the field of using vegetable oils as biodiesel in diesel engines. Moreover, a simulation study is conducted to compare oxygen and peak pressure of a diesel engine fueled by three different biodiesels in comparison to diesel fuel. We have examined the chemical ignition delay time and kinetic viscosity of biodiesel in the combustion process of diesel engine and the effects of these factors are evaluated on air–fuel mixing and subsequent combustion.


Author(s):  
Yoshiyuki Aoyagi ◽  
Masahiro Kaneda ◽  
Keisuke Numahata ◽  
Koji Korematsu ◽  
Junya Tanaka

Abstract In this paper effect of on reduction a Cu-ZSM-5 catalyst of nitrogen oxides is investigated in a diesel engine. This research focuses to solve a problem that there is not enough THC to reduce nitrogen oxides in exhaust gas from a diesel engine. When diesel oil is directly supplied into the exhaust gas, the THC concentration sharply rises and the NOx conversion rate increases. The maximum NOx conversion rate reaches to 63% when the flow rate of diesel oil is 30 ml/min at a catalyst temperature 450 °C. The NOx reduction with less sacrifice of the specific fuel consumption is possible when the fuel is supplied into the exhaust pipe.


2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Zhenrong Zheng ◽  
Jiawei Wang ◽  
Qian Zhang ◽  
Kezhu Mao ◽  
Lijuan Luo ◽  
...  

Purpose The purpose of this paper is to investigate the effects of structural parameters of fabric on thermal insulation properties of the coated fabric. Design/methodology/approach The authors established a numerical model for the ablation of silicone resin-coated fabric under high heat flow, and the simulation results have been validated by quartz lamp ablation experiment. The model was used to investigate the effects of structural parameters of glass fiber fabrics on the heat transfer process of the coated fabric. Findings The numerical values were in agreement with the experimental values. The thermal insulation of the coated glass fiber fabric was better than coated carbon fabric. Thermal insulation performance of the coated glass fiber fabrics was in order plain < 2/1 twill < 3/3 twill < 5/3 stain fabric. Increasing the warp density, from 100 to 180 ends/10 cm, the temperature of the back surface of the coated glass fiber fabric was reduced from 601°C to 553°C. Thermal insulation performance dramatically increased as yarn fineness went from 129 to 280 tex, and the temperature difference was 63°C. Research limitations/implications In the ablation process, to simplify the calculation, the combustion reaction of silicone resin was ignored, which can be added in the future research. Originality/value This paper provides the ablation model of the silicon-coated fabric based on the 3D geometry model to explore the influence of the structural parameters of coated glass fiber fabric on its thermal protection performance.


Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 505
Author(s):  
Jintao Sun ◽  
Fei Cai ◽  
Dongzhi Tao ◽  
Qingqing Ni ◽  
Yaqin Fu

Glass fiber fabrics/hollow glass microspheres (HGM)–waterborne polyurethane (WPU) textile composites were prepared using glass fiber, WPU, and HGM as skeleton material, binder, and insulation filler, respectively, to study the effect of HGM on the thermal insulation performance of glass fiber fabrics. Scanning electron microscopy, Instron 3367 tensile test instrument, thermal constant analysis, and infrared thermal imaging were used to determine the cross-sectional morphology, mechanical property, thermal conductivity, and thermal insulation property, respectively, of the developed materials. The results show that the addition of HGM mixed in WPU significantly enhanced thermal insulation performance of the textile composite with the reduction of thermal conductivity of 45.2% when the volume ratio of HGM to WPU is 0.8 compared with that of material without HGM. The composite can achieve the thermal insulation effect with a temperature difference of 17.74 °C at the temperature field of 70 °C. Meanwhile, the tensile strength of the composite is improved from 14.16 to 22.14 MPa. With these results, it is confirmed that designing hollow glass microspheres (HGM) is an effective way to develop and enhance the high performance of insulation materials with an obvious lightweight of the bulk density reaching about 50%.


Sign in / Sign up

Export Citation Format

Share Document