scholarly journals Manipulation of Miniature and Microminiature Bodies on a Harmonically Oscillating Platform by Controlling Dry Friction

Micromachines ◽  
2021 ◽  
Vol 12 (9) ◽  
pp. 1087
Author(s):  
Sigitas Kilikevičius ◽  
Algimantas Fedaravičius ◽  
Virginija Daukantienė ◽  
Kristina Liutkauskienė ◽  
Linas Paukštaitis
Keyword(s):  
Dry Friction ◽  
The Body ◽  
Control Parameters ◽  
Friction Control ◽  
Vibrating Plates ◽  
Directional Motion ◽  
Novel Method ◽  
Nonprehensile Manipulation ◽  
Motion Characteristics ◽  
And Control

Currently used nonprehensile manipulation systems that are based on vibrational techniques employ temporal (vibrational) asymmetry, spatial asymmetry, or force asymmetry to provide and control a directional motion of a body. This paper presents a novel method of nonprehensile manipulation of miniature and microminiature bodies on a harmonically oscillating platform by creating a frictional asymmetry through dynamic dry friction control. To theoretically verify the feasibility of the method and to determine the control parameters that define the motion characteristics, a mathematical model was developed, and modeling was carried out. Experimental setups for miniature and microminiature bodies were developed for nonprehensile manipulation by dry friction control, and manipulation experiments were carried out to experimentally verify the feasibility of the proposed method and theoretical findings. By revealing how characteristic control parameters influence the direction and velocity, the modeling results theoretically verified the feasibility of the proposed method. The experimental investigation verified that the proposed method is technically feasible and can be applied in practice, as well as confirmed the theoretical findings that the velocity and direction of the body can be controlled by changing the parameters of the function for dynamic dry friction control. The presented research enriches the classical theories of manipulation methods on vibrating plates and platforms, as well as the presented results, are relevant for industries dealing with feeding, assembling, or manipulation of miniature and microminiature bodies.

scholarly journals Nonprehensile Manipulation of Parts on a Horizontal Circularly Oscillating Platform with Dynamic Dry Friction Control

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5581
Author(s):  
Sigitas Kilikevičius ◽  
Kristina Liutkauskienė ◽  
Algimantas Fedaravičius
Keyword(s):  
Dry Friction ◽  
Full Range ◽  
Experimental Setup ◽  
Control Parameters ◽  
Effective Coefficient ◽  
Friction Control ◽  
Novel Method ◽  
The Mean ◽  
Nonprehensile Manipulation ◽  
Manipulation Process

This paper presents a novel method for nonprehensile manipulation of parts on a circularly oscillating platform when the effective coefficient of dry friction between the part and the platform is being dynamically controlled. Theoretical and experimental analyses have been performed to validate the proposed method and to determine the control parameters that define the characteristics of the part’s motion. A mathematical model of the manipulation process with dynamic dry friction control was developed and solved. The modeling showed that by changing the phase shift between the function for dynamic dry friction control and the function defining the circular motion of the platform, the part can be moved in any direction as the angle of displacement can be controlled in a full range from 0 to 2π. The nature of the trajectory and the mean displacement velocity of the part mainly depend on the width of the rectangular function for dynamic dry friction control. To verify the theoretical findings, an experimental setup was developed, and experiments of manipulation were carried out. The experimental results qualitatively confirmed the theoretical findings. The presented analysis enriches the classical theories of nonprehensile manipulation on oscillating platforms, and the presented findings are relevant for mechatronics, robotics, mechanics, electronics, medical, and other industries.

scholarly journals Vibrational Transportation on a Platform Subjected to Sinusoidal Displacement Cycles Employing Dry Friction Control

Sensors ◽  
2021 ◽  
Vol 21 (21) ◽  
pp. 7280
Author(s):  
Sigitas Kilikevičius ◽  
Algimantas Fedaravičius
Keyword(s):  
Dry Friction ◽  
Manufacturing Systems ◽  
Experimental Setup ◽  
Control Parameters ◽  
Kinematic Wave ◽  
Smooth Control ◽  
Friction Control ◽  
Functional Capabilities ◽  
Wide Range ◽  
Transportation Characteristics

Currently used vibrational transportation methods are usually based on asymmetries of geometric, kinematic, wave, or time types. This paper investigates the vibrational transportation of objects on a platform that is subjected to sinusoidal displacement cycles, employing periodic dynamic dry friction control. This manner of dry friction control creates an asymmetry, which is necessary to move the object. The theoretical investigation on functional capabilities and transportation regimes was carried out using a developed parametric mathematical model, and the control parameters that determine the transportation characteristics such as velocity and direction were defined. To test the functional capabilities of the proposed method, an experimental setup was developed, and experiments were carried out. The results of the presented research indicate that the proposed method ensures smooth control of the transportation velocity in a wide range and allows it to change the direction of motion. Moreover, the proposed method offers other new functional capabilities, such as a capability to move individual objects on the same platform in opposite directions and at different velocities at the same time by imposing different friction control parameters on different regions of the platform or on different objects. In addition, objects can be subjected to translation and rotation at the same time by imposing different friction control parameters on different regions of the platform. The presented research extends the classical theory of vibrational transportation and has a practical value for industries that operate manufacturing systems performing tasks such as handling and transportation, positioning, feeding, sorting, aligning, or assembling.

Probability model for control parameters in the aircraft's information and control systems

2018 ◽  
Vol 2 ◽  
pp. 9-16
Author(s):  
A. Al-Ammouri ◽  
◽  
H.A. Al-Ammori ◽  
A.E. Klochan ◽  
A.M. Al-Akhmad ◽  
...  
Keyword(s):  
Control Systems ◽  
Probability Model ◽  
Control Parameters ◽  
And Control

Perbandingan Efek Suplementasi Tablet Tambah Darah Dengan Dan Tanpa Vitamin C Terhadap Kadar Hemoglobin Pada Ibu Hamil Dengan Usiakehamilan 16-32 Minggu Di Desa Keniten Kecamatan Mojo Kabupaten Kediri

2017 ◽  
Vol 3 (1) ◽  
pp. 76
Author(s):  
Siti Asiyah ◽  
Dwi Estuning Rahayu ◽  
Wiranti Dwi Novita Isnaeni
Keyword(s):  
Treatment Group ◽  
Vitamin C ◽  
Gestational Age ◽  
Group Treatment ◽  
Sampling Technique ◽  
Hemoglobin Level ◽  
The Body ◽  
Control Group ◽  
Fetal Organ ◽  
And Control

The needed of Iron Tablet in pregnancy was increase than mother who not pregnant.  That  cause of  high metabolism at the pregnancy for formed of  fetal organ and energy. One of effort for prevent anemia in mother pregnant with giving the Iron tablet and vitamin c. The reason of  this research in 4 June – 11 July 2014 is for compare the effect of  iron tablet suplementation with and without vitamin C toward Hemoglobin level in mother pregnant With Gestational Age Of 16-32 Weeks In Desa Keniten Kecamatan Mojo Kabupaten Kediri. This research method using comparative analytical.  Research design type of Quasy Eksperiment that have treatment group and control group. Treatment group will giving by Iron tablet and 100 mg vitamin C, and control group just giving by iron tablet during 21 days. Population in this research are all of mother pregnant with Gestational Age Of 16-32 Weeks with Sampling technique is  cluster random sampling is 29 mother pregnant. Comparison analysis of  iron tablet suplementation effect with and without vitamin C toward Hemoglobin level in mother pregnant With Gestational Age Of 16-32 Weeks, data analysis using Mann Whitney U-test and the calculated U value (44,5) less than U-table (51). So there was difference of iron tablet suplementation effect with and without vitamin C toward Hemoglobin level in mother pregnant With Gestational Age Of 16-32 Weeks Therefore, the addition of vitamin C on iron intake is needed to increase the uptake of iron tablets. When the amount of iron uptake increases, the reserves of iron in the body will also increase, so as to prevent anemia in pregnant women; Keywords : Iron Tablet (Fe), Vitamin C, Hemoglobin level, Mother Pregnant

In-vivo evaluation of lipid lowering ability of Chloris paraguaiensis extracts

2020 ◽  
Vol 7 (2) ◽  
pp. 21-24
Author(s):  
Pavani C H
Keyword(s):  
Medicinal Plants ◽  
Chemical Constituents ◽  
The Body ◽  
Lipid Lowering ◽  
Medical Systems ◽  
In Vivo Evaluation ◽  
Standard Drug ◽  
Anti Oxidant ◽  
And Control

Hyperlipidemia is the immediate results of the excessive fat intake in food. This results in the elevated levels of cholesterol and triglycerides in the blood. This leads to heart conditions like CAD, hypertension, congestive heart failure as risk factors which can be lethal. There are many drugs to treat and control the lipids levels in the body. These drugs are either designed to prevent LDL accumulation and VLDL synthesis. Some drugs also lower the elevated levels of saturated lipids in the body. But many drugs are known to cause side effects and adverse effects; therefore, alternatives to the drugs are the subjects for current investigations. Herbs and medicinal plants are used as treatment sources for many years. They have been used in the Indian medical systems like Ayurveda, Siddha etc. As the application of herbs in the treatment is growing, there is an urgent need for the establishment of Pharmacological reasoning and standardization of the activity of the medicinal plants. Chloris paraguaiensis Steud. is Poyaceae member that is called locally as Uppugaddi. Traditionally it is used to treat Rheumatism, Diabetes, fever and diarrhoea. The chemical constituents are known to have anti-oxidant properties and most of the anti-oxidants have anti-hyperlipidemic activity too. Since the plant has abundant flavonoid and phenol content, the current research focusses on the investigation of the anti-hyperlipidemic activity of the plant Chloris extracts. Extracts of Chloris at 200mg/kg showed a comparably similar anti hyperlipidemia activity to that of the standard drug. The extracts showed a dose based increase in the activity at 100 and 200mg/kg body weight.

Role of Rasayana in Prevention of COVID-19 - A Review

2020 ◽  
Vol 11 (SPL1) ◽  
pp. 716-722
Author(s):  
Sneha Dhakite ◽  
Sadhana Misar Wajpeyi
Keyword(s):  
Immune System ◽  
Respiratory System ◽  
Viral Infections ◽  
Cost Effective ◽  
The Body ◽  
Healthy Life ◽  
Vital Functions ◽  
Healthy Life Style ◽  
And Control

The “Coronavirus disease 19 (COVID-19)” is caused by “Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2)”, a newly discovered member of the Coronaviridae family of viruses which is a highly communicable. There is no effective medical treatment till date for Coronavirus disease hence prevention is the best way to keep disease away. Rasayana proved to be highly efficacious and cost effective for the Prevention and Control of viral infections when vaccines and standard therapies are lacking. Rasayana Chikitsa is one of the eight branches of Ashtanga Ayurveda which helps to maintain healthy life style. Rasayana improves immunity and performs many vital functions of human body. Vyadhikshamatva that is immune mechanism of the body is involved in Prevention of the occurrence of a new disease and it also decreases the virulence and progression of an existing disease. In COVID-19 the Respiratory system mainly get affected which is evident from its symptoms like cold, cough and breathlessness. Here the drugs help in enhancing immune system and strengthening functions of Respiratory system can be useful. For this purpose, the Rasayana like Chyavanprasha, Agastya Haritaki, Pippali Rasayana, Guduchi, Yashtimadhu, Haridra, Ashwagandha, Tulsi are used. Rasayana working on Respiratory system are best for Prevention of Coronavirus and boosting immune system. Rasayana Chikitsa can be effective in the Prevention as well as reducing symptoms of COVID-19.

scholarly journals The dynamic of body and brain co-evolution

2021 ◽  
pp. 105971232199468
Author(s):  
Paolo Pagliuca ◽  
Stefano Nolfi
Keyword(s):  
Morphological Traits ◽  
The Body ◽  
Morphological Variations ◽  
And Control ◽  
Selection Of

We introduce a method that permits to co-evolve the body and the control properties of robots. It can be used to adapt the morphological traits of robots with a hand-designed morphological bauplan or to evolve the morphological bauplan as well. Our results indicate that robots with co-adapted body and control traits outperform robots with fixed hand-designed morphologies. Interestingly, the advantage is not due to the selection of better morphologies but rather to the mutual scaffolding process that results from the possibility to co-adapt the morphological traits to the control traits and vice versa. Our results also demonstrate that morphological variations do not necessarily have destructive effects on robots’ skills.

scholarly journals Clinical and in Vivo Response Following Surgery or Surgery Plus Adjuvant Chemotherapy or Immunotherapy for Colorectal Carcinoma in a Rat Model

1983 ◽  
Vol 76 (10) ◽  
pp. 833-840 ◽  
Author(s):  
A K House ◽  
M A L Maley
Keyword(s):  
Body Weight ◽  
Adjuvant Chemotherapy ◽  
Surgical Excision ◽  
The Body ◽  
Recurrent Tumour ◽  
Mesenteric Node ◽  
And Control ◽  
Tumour Weight

Two cohorts of rats, 240 with colon cancer and 150 controls, were assessed clinically and immunologically for their response to tumour and its management which was either by surgical excision alone or by surgical excision combined with either adjuvant chemotherapy or immunotherapy. The histology and invasion characteristics were observed for similarity with those of human lesions. Metastases were found in liver, lymph nodes, the peritoneum or lungs in 27% of animals during follow up. Significantly fewer adjuvant-treated rats had metastases than those receiving surgery alone ( P < 0.05), and less total tumour weight was found in the adjuvant-treated rats at four ( P < 0.03) and six ( P < 0.001) weeks postoperatively. Animals in the adjuvant immunotherapy group survived longer than in either other group ( P < 0.001). The crude parameters of host response to tumour, body, spleen and mesenteric lymph node weight were recorded and the latter two indexed to body weight. The body weight of tumour and control rats increased significantly with time ( P < 0.04). The spleen and mesenteric node indices were significantly ( P < 0.04) greater in tumour than control rats and were varied by recurrent tumour growth and by the adjuvant treatment administered postoperatively.

Sign in / Sign up

Export Citation Format

Share Document