scholarly journals Lead-Free Bi3.15Nd0.85Ti3O12 Nanoplates Filler-Elastomeric Polymer Composite Films for Flexible Piezoelectric Energy Harvesting

Micromachines ◽  
2020 ◽  
Vol 11 (11) ◽  
pp. 966
Author(s):  
Wancheng Qin ◽  
Peng Zhou ◽  
Yajun Qi ◽  
Tianjin Zhang
Keyword(s):  
Energy Harvesting ◽  
Mechanical Energy ◽  
Short Circuit ◽  
Composite Films ◽  
Short Circuit Current ◽  
Lead Free ◽  
Piezoelectric Energy Harvesting ◽  
Wearable Electronics ◽  
Light Emitting ◽  
Piezoelectric Energy

Nowadays, wearable and flexible nanogenerators are of great importance for portable personal electronics. A flexible piezoelectric energy harvester (f-PEH) based on Bi3.15Nd0.85Ti3O12 single crystalline nanoplates (BNdT NPs) and polydimethylsiloxane (PDMS) elastomeric polymer was fabricated, and high piezoelectric energy harvesting performance was achieved. The piezoelectric output performance is highly dependent on the mass ratio of the BNdT NPs in the PDMS matrix. The as-prepared f-PEH with 12.5 wt% BNdT NPs presents the highest output voltage of 10 V, a peak-peak short-circuit current of 1 μA, and a power of 1.92 μW under tapping mode of 6.5 N at 2.7 Hz, which can light up four commercial light emitting diodes without the energy storage process. The f-PEHs can be used to harvest daily life energy and generate a voltage of 2–6 V in harvesting the mechanical energy of mouse clicking or foot stepping. These results demonstrate the potential application of the lead-free BNdT NPs based f-PEHs in powering wearable electronics

Development of lead-free materials for piezoelectric energy harvesting

2011 ◽  
Vol 1325 ◽  
Author(s):  
R. Rai ◽  
I. Coondoo ◽  
R. P. Lopes ◽  
I. Bdikin ◽  
R. Ayouchi ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Piezoresponse Force Microscopy ◽  
Solid State Reaction Method ◽  
Lead Free ◽  
Piezoelectric Energy Harvesting ◽  
Force Microscopy ◽  
Environment And Health ◽  
Piezoelectric Energy

ABSTRACTMechanical energy harvesting from ambient vibrations is an attractive renewable source of energy for various applications. Prior research was solely based on lead-containing materials which are detrimental to the environment and health. Therefore, lead-free materials are becoming more attractive for harvesting applications. The present work is focused on the development of lead-free piezoelectric materials based on solid solution having composition (KNa)NbO3-xABO3, (where A = Li, and B = Nb; x = 0, 5, 5.5, 6, and 6.5 wt%). The solid solutions of the above ceramics were prepared by using solid-state reaction method. The X-ray diffraction spectra exhibited single phase formation and good crystallinity with LiNbO3 addition up to x = 6.5 wt%. Dielectric studies reveal that the composition with LiNbO3 = 6.5 wt% exhibits superior properties suitable for piezoelectric energy harvesting applications. The nanoscale piezoelectric data obtained with piezoresponse force microscopy provide a direct evidence of strong piezoelectricity with LN doping. The best piezoelectric properties are obtained for the composition K0.5Na0.5NbO3 – 6.5%LiNbO3.

Energy harvesting from quasi-static deformations via bilaterally constrained strips

2018 ◽  
Vol 29 (18) ◽  
pp. 3572-3581
Author(s):  
Suihan Liu ◽  
Ali Imani Azad ◽  
Rigoberto Burgueño
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Energy Resource ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Power Budget ◽  
Piezoelectric Energy ◽  
Static Conditions

Piezoelectric energy harvesting from ambient vibrations is well studied, but harvesting from quasi-static responses is not yet fully explored. The lack of attention is because quasi-static actions are much slower than the resonance frequency of piezoelectric oscillators to achieve optimal outputs; however, they can be a common mechanical energy resource: from large civil structure deformations to biomechanical motions. The recent advances in bio-micro-electro-mechanical systems and wireless sensor technologies are motivating the study of piezoelectric energy harvesting from quasi-static conditions for low-power budget devices. This article presents a new approach of using quasi-static deformations to generate electrical power through an axially compressed bilaterally constrained strip with an attached piezoelectric layer. A theoretical model was developed to predict the strain distribution of the strip’s buckled configuration for calculating the electrical energy generation. Results from an experimental investigation and finite element simulations are in good agreement with the theoretical study. Test results from a prototyped device showed that a peak output power of 1.33 μW/cm2 was generated, which can adequately provide power supply for low-power budget devices. And a parametric study was also conducted to provide design guidance on selecting the dimensions of a device based on the external embedding structure.

Mechanistic Modeling and Economic Analysis of Piezoelectric Energy Harvesting Potential in Airport Pavements

2020 ◽  
Vol 2674 (11) ◽  
pp. 64-75
Author(s):  
Jingnan Zhao ◽  
Hao Wang
Keyword(s):  
Energy Harvesting ◽  
Economic Analysis ◽  
Power Output ◽  
Piezoelectric Materials ◽  
Mechanical Energy ◽  
Mechanistic Modeling ◽  
Piezoelectric Energy Harvesting ◽  
Levelized Cost Of Electricity ◽  
Near Surface ◽  
Piezoelectric Energy

This study investigated the feasibility of applying piezoelectric energy harvesting technology in airfield pavements through mechanistic modeling and economic analysis. The energy harvesting performance of piezoelectric transducers was evaluated based on mechanical energy induced by multi-wheel aircraft loading on flexible airfield pavements. A three-dimensional finite element model was used to estimate the stress pulse and magnitude under moving aircraft tire loading. A stack piezoelectric transducer design was used to estimate the power output of a piezoelectric harvester embedded at different locations and depths in the pavement. The aircraft load and speed were found to be vital factors affecting the power output, along with the installation depth and horizontal locations of the energy harvester. On the other hand, the installation of the energy module had a negligible influence on the horizontal tensile strains at the bottom of the asphalt layer and compressive strains on the top of the subgrade. However, the near-surface pavement strains increased when the edge ribs of the tire were loaded on the energy module. Feasibility analysis results showed that the calculated levelized cost of electricity was high in general, although it varies depending on the airport traffic levels and the service life of the energy module. With the development of piezoelectric materials and technology, further evaluation of energy harvesting applications at airports needs to be conducted.

Piezoelectric Energy Harvesting From Roadways Based on Pavement Compatible Package

2019 ◽  
Vol 86 (9) ◽  
Author(s):  
He Zhang ◽  
Kangxu Huang ◽  
Zhicheng Zhang ◽  
Tao Xiang ◽  
Liwei Quan
Keyword(s):  
Energy Harvesting ◽  
Output Power ◽  
Mechanical Energy ◽  
Scaling Law ◽  
Piezoelectric Energy Harvesting ◽  
Resistive Load ◽  
Piezoelectric Energy ◽  
Simple Scaling ◽  
Energy Harvesting System ◽  
Combined Parameters

Scavenging mechanical energy from the deformation of roadways using piezoelectric energy transformers has been intensively explored and exhibits a promising potential for engineering applications. We propose here a new packaging method that exploits MC nylon and epoxy resin as the main protective materials for the piezoelectric energy harvesting (PEH) device. Wheel tracking tests are performed, and an electromechanical model is developed to double evaluate the efficiency of the PEH device. Results indicate that reducing the embedded depth of the piezoelectric chips may enhance the output power of the PEH device. A simple scaling law is established to show that the normalized output power of the energy harvesting system relies on two combined parameters, i.e., the normalized electrical resistive load and normalized embedded depth. It suggests that the output power of the system may be maximized by properly selecting the geometrical, material, and circuit parameters in a combined manner. This strategy might also provide a useful guideline for optimization of piezoelectric energy harvesting system in practical roadway applications.

Harvesting Energy of Body Motion Through Single Electrode Based Self-Powered Triboelectric Nanogenerator

2019 ◽  
Vol 14 (11) ◽  
pp. 1572-1581 ◽  
Author(s):  
Shamsuddin ◽  
Saeed Ahmed Khan ◽  
Ahmed Ali ◽  
Abdul Qadir Rahimoon ◽  
Palwasha Jalalzai
Keyword(s):  
Energy Harvesting ◽  
Human Skin ◽  
Mechanical Energy ◽  
Short Circuit ◽  
Copper Acetate ◽  
Body Motion ◽  
Triboelectric Nanogenerator ◽  
Wearable Electronics ◽  
Silicon Rubber ◽  
Self Powered

A self-powered mechanical energy harvesting system consists of the storage system and the energy scavenging TENG. Triboelectric nanogenerator includes a system which integrates a self-powered sensor and the power generator, this triboelectric nanogenerator has the potential to be used in a modern wearable electronic TENG. It has been reported that triboelectric nanogenerator working under complicated deformation like bending, stretching and twisting brings the main problem. Here we have fabricated the shape adaptive Triboelectric nanogenerator which solves all the deformation issues and can harvest the mechanical energy through human body motion in any deformation, the fabricated TENG is a self-powered sensor which can sense the different human activities and can monitor the health issues, the TENG stores the energy directly to the capacitor for powering the wearable electronics. A human skin based triboelectric nanogenerator was designed from the silicon rubber and the copper acetate-II used as the electrode, which makes the TENG flexible self-powered sensor, it can be stretched up to 200%. The stretchable nature and the flexibility of the human skin based silicon rubber triboelectric nanogenerator makes it the promising flexible and shape-adaptive energy harvesting TENG. The fabricated TENG generated the open circuit voltage 70 V and the short circuit current 11 μA and delivered the power 55 μW at the load of 80 MΩ. 42 LEDs were powered directly from the TENG. The fabricated TENG has human skin tactile property which does not harm the human skin while using it multiple times. The layer of copper acetate is completely coated with silicone rubber. The fabricated TENG is flexible, biocompatible and cost effective.

scholarly journals Development of Micro-Mobility Based on Piezoelectric Energy Harvesting for Smart City Applications

2020 ◽  
Vol 12 (7) ◽  
pp. 2933 ◽  
Author(s):  
Chaiyan Jettanasen ◽  
Panapong Songsukthawan ◽  
Atthapol Ngaopitakkul
Keyword(s):  
Energy Source ◽  
Energy Harvesting ◽  
Smart City ◽  
Alternative Energy ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Alternative Energy Source ◽  
Piezoelectric Energy ◽  
Energy Harvesting System

This study investigates the use of an alternative energy source in the production of electric energy to meet the increasing energy requirements, encourage the use of clean energy, and thus reduce the effects of global warming. The alternative energy source used is a mechanical energy by piezoelectric material, which can convert mechanical energy into electrical energy, that can convert mechanical energy from pressure forces and vibrations during activities such as walking and traveling into electrical energy. Herein, a pilot device is designed, involving the modification of a bicycle into a stationary exercise bike with a piezoelectric generator, to study energy conversion and storage generated from using the bike. Secondly, the piezoelectric energy harvesting system is used on bicycles as a micro-mobility, light electric utility vehicle with smart operation, providing a novel approach to smart city design. The results show that the energy harvested from the piezoelectric devices can be stored in a 3200 mAh, 5 V battery and power sensors on the bicycle. Moreover, 13.6 mW power can be generated at regular cycling speed, outputting 11.5 V and 1.2 mA. Therefore, the piezoelectric energy harvesting system has sufficient potential for application as a renewable energy source that can be used with low power equipment.

Active Piezoelectric Energy Harvesting: General Principle and Experimental Demonstration

2008 ◽  
Vol 20 (5) ◽  
pp. 575-585 ◽  
Author(s):  
Yiming Liu ◽  
Geng Tian ◽  
Yong Wang ◽  
Junhong Lin ◽  
Qiming Zhang ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Boundary Conditions ◽  
Energy Conversion ◽  
Mechanical Energy ◽  
Impedance Matching ◽  
Energy Conversion Efficiency ◽  
Limiting Factors ◽  
Piezoelectric Energy Harvesting ◽  
Piezoelectric Device ◽  
Piezoelectric Energy

In piezoelectric energy harvesting systems, the energy harvesting circuit is the interface between a piezoelectric device and an electrical load. A conventional view of this interface is based on impedance matching concepts. In fact, an energy harvesting circuit can also apply electrical boundary conditions, such as voltage and charge, to the piezoelectric device for each energy conversion cycle. An optimized electrical boundary condition can therefore increase the mechanical energy flow into the device and the energy conversion efficiency of the device. We present a study of active energy harvesting, a type of energy harvesting approach which uses switch-mode power electronics to control the voltage and/or charge on a piezoelectric device relative to the mechanical input for optimized energy conversion. Under quasi-static assumptions, a model based on the electromechanical boundary conditions is established. Some practical limiting factors of active energy harvesting, due to device limitations and the efficiency of the power electronic circuitry, are discussed. In the experimental part of the article, active energy harvesting is demonstrated with a multilayer PVDF polymer device. In these experiments, the active energy harvesting approach increased the harvested energy by a factor of five for the same mechanical displacement compared to an optimized diode rectifier-based circuit.

Sign in / Sign up

Export Citation Format

Share Document