scholarly journals An Immunosensor for the Detection of ULBP2 Biomarker

Micromachines ◽  
2020 ◽  
Vol 11 (6) ◽  
pp. 568
Author(s):  
Wen-Chi Yang ◽  
Su-Yu Liao ◽  
Thien Luan Phan ◽  
Nguyen Van Hieu ◽  
Pei-Yi Chu ◽  
...  
Keyword(s):  
Zno Nanoparticles ◽  
Limit Of Detection ◽  
Signal To Noise Ratio ◽  
High Sensitivity ◽  
Impedance Spectrum ◽  
Array Configuration ◽  
Long Term Storage ◽  
Coefficients Of Variation ◽  
Screen Printed Carbon Electrode ◽  
Good Repeatability

Pancreatic cancer (PC) is a global health problem that features a very high mortality rate. The UL16 binding protein 2 (ULBP2) is a new biomarker for PC detection. This study develops a simple, reliable, and inexpensive immunosensor for the detection of the ULBP2 antigen while also investigating the effects of an array configuration of connected sensors and zinc oxide (ZnO) nanoparticles on the immunosensor’s sensitivity. The ULBP2 antibody was immobilized onto the screen-printed carbon electrode (SPCE) surfaces of three different sensors: a simple SPCE (ULBP2-SPCE); an SPCE array, which is a series of identical SPCE connected to each other at different arrangements of rows and columns (ULBP2-SPCE-1x2 and ULBP2-SPCE-1x3); and an SPCE combined with ZnO nanoparticles (ULBP2-ZnO/SPCE). Impedance spectrum measurements for the immunosensors to ULBP2 antigen were conducted and compared. According to the result, the array configurations (ULBP2-SPCE-1x2 and ULBP2-SPCE-1x3) show an improvement of sensitivity compared to the ULBP2-SPCE alone, but the improvement is not as significant as that of the ULBP2-ZnO/SPCE configuration (ULBP2-ZnO/SPCE > ULBP2-SPCE: 18 times larger). The ULBP2-ZnO/SPCE immunosensor has a low limit of detection (1 pg/mL) and a high sensitivity (332.2 Ω/Log(pg/mL)), excellent linearity (R2 = 0.98), good repeatability (coefficients of variation = 5.03%), and is stable in long-term storage (retaining 95% activity after 28 days storage). In an array configuration, the immunosensor has an increased signal-to-noise ratio (ULBP2-SPCE-1x3 > ULBP2-SPCE: 1.5-fold) and sensitivity (ULBP2-SPCE-1x3 > ULBP2-SPCE: 2.6-fold). In conclusion, either the modification with ZnO nanoparticles onto the sensor or the use of an array configuration of sensors can enhance the immunosensor’s sensitivity. In this study, the best immunosensor for detecting ULBP2 antigens is the ULBP2-ZnO/SPCE immunosensor.

Novel electrochemiluminescent materials for sensor applications

2014 ◽  
Vol 174 ◽  
pp. 357-367 ◽  
Author(s):  
Lynn Dennany ◽  
Zahera Mohsan ◽  
Alexander L. Kanibolotsky ◽  
Peter J. Skabara
Keyword(s):  
Redox Reactions ◽  
Limit Of Detection ◽  
Signal To Noise Ratio ◽  
High Sensitivity ◽  
Radical Cations ◽  
Detection Sensitivity ◽  
Sensor Development ◽  
Sensor Applications ◽  
Sensor Devices ◽  
The Impact

Electrochemiluminescence (ECL) uses redox reactions to generate light at an electrode surface, and is gaining increasing attention for biosensor development due to its high sensitivity and excellent signal-to-noise ratio. ECL studies of monodisperse oligofluorene–truxenes (T4 series) have been reported previously, showing the production of stable radical cations and radical anions, generating blue ECL. The compound in this study differs from the original structures, in that there are 2,1,3-benzothiadazole (BT) units inserted between the first and second fluorene units of the quarterfluorenyl arms. It was therefore anticipated that the incorporation of these highly luminescent and ECL-active compounds into sensor development would lead to significant decreases in detection limits. In this contribution, we report on the impact of incorporating these novel complexes into sensor devices on the ECL efficiency, as well as the ability of these to improve the detection sensitivity and decrease the limit of detection using the reagent-free detection of model analytes. The real world impact of these compounds is elucidated through the comparison with more standard ECL materials such as ruthenium-based compounds. The potential for multiple applications is to be examined within this contribution.

scholarly journals An Electrochemical Sensor Based on a Nitrogen-Doped Carbon Material and PEI Composites for Sensitive Detection of 4-Nitrophenol

Nanomaterials ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 86
Author(s):  
Xue Nie ◽  
Peihong Deng ◽  
Haiyan Wang ◽  
Yougen Tang
Keyword(s):  
Electrochemical Sensor ◽  
Signal To Noise Ratio ◽  
High Sensitivity ◽  
Environmental Water ◽  
Fast Response ◽  
Nitrogen Doped ◽  
Potential Applications ◽  
Good Repeatability ◽  
Nitrogen Doped Carbon ◽  
Optimized Conditions

A glassy carbon electrode (GCE) was modified with nitrogen-doped carbon materials (NC) and polyethyleneimine (PEI) composites to design an electrochemical sensor for detecting 4-nitrophenol (4-NP). The NC materials were prepared by a simple and economical method through the condensation and carbonization of formamide. The NC materials were dispersed in a polyethyleneimine (PEI) solution easily. Due to the excellent properties of NC and PEI as well as their synergistic effect, the electrochemical reduction of the 4-NP on the surface of the NC–PEI composite modified electrode was effectively enhanced. Under the optimized conditions, at 0.06–10 μM and 10–100 μM concentration ranges, the NC–PEI/GCE sensor shows a linear response to 4-NP, and the detection limit is 0.01 μM (the signal-to-noise ratio is three). The reliability of the sensor for the detection of 4-NP in environmental water samples was successfully evaluated. In addition, the sensor has many advantages, including simple preparation, fast response, high sensitivity and good repeatability. It may be helpful for potential applications in detecting other targets.

Development of an Indirect Competitive Enzyme-Linked Immunosorbent Assay Based on the Multiepitope Peptide for the Synchronous Detection of Staphylococcal Enterotoxin A and G Proteins in Milk

2015 ◽  
Vol 78 (2) ◽  
pp. 362-369 ◽  
Author(s):  
MINGYAN LIANG ◽  
TINGTING ZHANG ◽  
XUELAN LIU ◽  
YANAN FAN ◽  
SHENGLIN XIA ◽  
...  
Keyword(s):  
Immunosorbent Assay ◽  
Limit Of Detection ◽  
Signal To Noise Ratio ◽  
Food Poisoning ◽  
High Sensitivity ◽  
Cross Reactivity ◽  
Enzyme Linked Immunosorbent Assay ◽  
Synchronous Detection ◽  
Standard Curve ◽  
Stability And Accuracy

Staphylococcal food poisoning (SFP), one of the most common foodborne diseases, results from ingestion of staphylococcal enterotoxins (SEs) in foods. In our previous studies, we found that SEA and SEG were two predominant SE proteins produced by milk-acquired S. aureus isolates. Here, a tandemly arranged multiepitope peptide (named SEAGepis) was designed with six linear B-cell epitopes derived from SEA or SEG and was heterologously expressed. The SEAGepis-specific antibody was prepared by immunizing rabbit with rSEAGepis. Then, an indirect competitive enzyme-linked immunosorbent assay (ic-ELISA) based on rSEAGepis and the corresponding antibody was developed to simultaneously detect SEA and SEG. Under the optimized conditions, the ic-ELISA standard curve for rSEAGepis was constructed in the concentration range of 0.5 to 512 ng/ml, and the average coefficients of variation of intra-and interassay were 4.28 and 5.61% during six standard concentrations. The average half-maximal inhibitory concentration was 5.07 ng/ml, and the limit of detection at a signal-to-noise ratio of 3 was 0.52 ng/ml. The anti-rSEAGepis antibody displayed over 90% cross-reactivity with SEA and SEG but less than 0.5% cross-reactivity with other enterotoxins. Artificially contaminated milk with different concentrations of rSEAGepis, SEA, and SEG was detected by the established ic-ELISA; the recoveries of rSEAGepis, SEA, and SEG were 91.1 to 157.5%, 90.3 to 134.5%, and 89.1 to 117.5%, respectively, with a coefficient of variation below 12%. These results demonstrated that the newly established ic-ELISA possessed high sensitivity, specificity, stability, and accuracy and could potentially be a useful analytical method for synchronous detection of SEA and SEG in milk.

scholarly journals Dispersed Conducting Polymer Nanocomposites with Glucose Oxidase and Gold Nanoparticles for the Design of Enzymatic Glucose Biosensors

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2173
Author(s):  
Natalija German ◽  
Almira Ramanaviciene ◽  
Arunas Ramanavicius
Keyword(s):  
Glucose Oxidase ◽  
Conducting Polymer ◽  
Limit Of Detection ◽  
High Sensitivity ◽  
Serum Samples ◽  
Glucose Determination ◽  
Constant Potential ◽  
Good Repeatability ◽  
Graphite Rod

Biosensors for the determination of glucose concentration have a great significance in clinical diagnosis, and in the food and pharmaceutics industries. In this research, short-chain polyaniline (PANI) and polypyrrole (Ppy)-based nanocomposites with glucose oxidase (GOx) and 6 nm diameter AuNPs (AuNPs(6 nm)) were deposited on the graphite rod (GR) electrode followed by the immobilization of GOx. Optimal conditions for the modification of GR electrodes by conducting polymer-based nanocomposites and GOx were elaborated. The electrodes were investigated by cyclic voltammetry and constant potential amperometry in the presence of the redox mediator phenazine methosulfate (PMS). The improved enzymatic biosensors based on GR/PANI-AuNPs(6 nm)-GOx/GOx and GR/Ppy-AuNPs(6 nm)-GOx/GOx electrodes were characterized by high sensitivity (65.4 and 55.4 μA mM−1 cm−2), low limit of detection (0.070 and 0.071 mmol L−1), wide linear range (up to 16.5 mmol L−1), good repeatability (RSD 4.67 and 5.89%), and appropriate stability (half-life period (τ1/2) was 22 and 17 days, respectively). The excellent anti-interference ability to ascorbic and uric acids and successful practical application for glucose determination in serum samples was presented for GR/PANI-AuNPs(6 nm)-GOx/GOx electrode.

scholarly journals An Acetylcholinesterase Inhibition-Based Biosensor for Aflatoxin B1 Detection Using Sodium Alginate as an Immobilization Matrix

Toxins ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 173 ◽  
Author(s):  
Amani Chrouda ◽  
Khouala Zinoubi ◽  
Raya Soltane ◽  
Noof Alzahrani ◽  
Gamal Osman ◽  
...  
Keyword(s):  
Sodium Alginate ◽  
Aflatoxin B1 ◽  
Dynamic Range ◽  
Electrochemical Impedance ◽  
High Sensitivity ◽  
Acetylcholinesterase Inhibition ◽  
Toxic Substances ◽  
Long Term Storage ◽  
Good Repeatability

In this study, we investigated a novel aflatoxin biosensor based on acetylcholinesterase (AChE) inhibition by aflatoxin B1 (AFB1) and developed electrochemical biosensors based on a sodium alginate biopolymer as a new matrix for acetylcholinesterase immobilization. Electrochemical impedance spectroscopy was performed as a convenient transduction method to evaluate the AChE activity through the oxidation of the metabolic product, thiocholine. Satisfactory analytical performances in terms of high sensitivity, good repeatability, and long-term storage stability were obtained with a linear dynamic range from 0.1 to 100 ng/mL and a low detection limit of 0.1 ng/mL, which is below the recommended level of AFB1 (2 µg/L). The suitability of the proposed method was evaluated using the samples of rice supplemented with AFB1 (0.5 ng/mL). The selectivity of the AChE-biosensor for aflatoxins relative to other sets of toxic substances (OTA, AFM 1) was also investigated.

scholarly journals Ratiometric Fluorescent Biosensors for Glucose and Lactate Using an Oxygen-Sensing Membrane

Biosensors ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 208
Author(s):  
Hong Dinh Duong ◽  
Jong Il Rhee
Keyword(s):  
Limit Of Detection ◽  
Oxygen Sensing ◽  
High Sensitivity ◽  
Glucose Sensing ◽  
Oxidation Reactions ◽  
Lactate Oxidase ◽  
Lactate Oxidation ◽  
Detection Range ◽  
Quenching Effect ◽  
Sensing Membrane

In this study, ratiometric fluorescent glucose and lactate biosensors were developed using a ratiometric fluorescent oxygen-sensing membrane immobilized with glucose oxidase (GOD) or lactate oxidase (LOX). Herein, the ratiometric fluorescent oxygen-sensing membrane was fabricated with the ratio of two emission wavelengths of platinum meso-tetra (pentafluorophenyl) porphyrin (PtP) doped in polystyrene particles and coumarin 6 (C6) captured into silica particles. The operation mechanism of the sensing membranes was based on (i) the fluorescence quenching effect of the PtP dye by oxygen molecules, and (ii) the consumption of oxygen levels in the glucose or lactate oxidation reactions under the catalysis of GOD or LOX. The ratiometric fluorescent glucose-sensing membrane showed high sensitivity to glucose in the range of 0.1–2 mM, with a limit of detection (LOD) of 0.031 mM, whereas the ratiometric fluorescent lactate-sensing membrane showed the linear detection range of 0.1–0.8 mM, with an LOD of 0.06 mM. These sensing membranes also showed good selectivity, fast reversibility, and stability over long-term use. They were applied to detect glucose and lactate in artificial human serum, and they provided reliable measurement results.

scholarly journals Ag nanoparticles outperform Au nanoparticles for the use as label in electrochemical point-of-care sensors

2021 ◽  
Author(s):  
Franziska Beck ◽  
Carina Horn ◽  
Antje J. Baeumner
Keyword(s):  
Limit Of Detection ◽  
Point Of Care ◽  
Automatic Measurement ◽  
High Sensitivity ◽  
Differential Pulse ◽  
Small Sample ◽  
Blood Protein ◽  
User Friendliness ◽  
Response Curves ◽  
Assay Protocol

AbstractElectrochemical immunosensors enable rapid analyte quantification in small sample volumes, and have been demonstrated to provide high sensitivity and selectivity, simple miniaturization, and easy sensor production strategies. As a point-of-care (POC) format, user-friendliness is equally important and most often not combinable with high sensitivity. As such, we demonstrate here that a sequence of metal oxidation and reduction, followed by stripping via differential pulse voltammetry (DPV), provides lowest limits of detection within a 2-min automatic measurement. In exchanging gold nanoparticles (AuNPs), which dominate in the development of POC sensors, with silver nanoparticles (AgNPs), not only better sensitivity was obtained, but more importantly, the assay protocol could be simplified to match POC requirements. Specifically, we studied both nanoparticles as reporter labels in a sandwich immunoassay with the blood protein biomarker NT-proBNP. For both kinds of nanoparticles, the dose-response curves easily covered the ng∙mL−1 range. The mean standard deviation of all measurements of 17% (n ≥ 4) and a limit of detection of 26 ng∙mL−1 were achieved using AuNPs, but their detection requires addition of HCl, which is impossible in a POC format. In contrast, since AgNPs are electrochemically less stable, they enabled a simplified assay protocol and provided even lower LODs of 4.0 ng∙mL−1 in buffer and 4.7 ng∙mL−1 in human serum while maintaining the same or even better assay reliability, storage stability, and easy antibody immobilization protocols. Thus, in direct comparison, AgNPs clearly outperform AuNPs in desirable POC electrochemical assays and should gain much more attention in the future development of such biosensors.

Analytical assessment of ortho clinical diagnostics high-sensitivity cardiac troponin I assay

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Peter A. Kavsak ◽  
Tara Edge ◽  
Chantele Roy ◽  
Paul Malinowski ◽  
Karen Bamford ◽  
...  
Keyword(s):  
Cardiac Troponin ◽  
Troponin I ◽  
Limit Of Detection ◽  
Clinical Performance ◽  
Characteristic Curve ◽  
Area Under The Curve ◽  
High Sensitivity ◽  
Cardiac Troponin I ◽  
Clinical Diagnostics ◽  
Ortho Clinical Diagnostics

AbstractObjectivesTo analytically evaluate Ortho Clinical Diagnostics VITROS high-sensitivity cardiac troponin I (hs-cTnI) assay in specific matrices with comparison to other hs-cTn assays.MethodsThe limit of detection (LoD), imprecision, interference and stability testing for both serum and lithium heparin (Li-Hep) plasma for the VITROS hs-cTnI assay was determined. We performed Passing-Bablok regression analyses between sample types for the VITROS hs-cTnI assay and compared them to the Abbott ARCHITECT, Beckman Access and the Siemens ADVIA Centaur hs-cTnI assays. We also performed Receiver-operating characteristic curve analyses with the area under the curve (AUC) determined in an emergency department (ED)-study population (n=131) for myocardial infarction (MI).ResultsThe VITROS hs-cTnI LoD was 0.73 ng/L (serum) and 1.4 ng/L (Li-Hep). Stability up to five freeze-thaws was observed for the Ortho hs-cTnI assay, with the analyte stability at room temperature in serum superior to Li-Hep with gross hemolysis also affecting Li-Hep plasma hs-cTnI results. Comparison of Li-Hep to serum concentrations (n=202), yielded proportionally lower concentrations in plasma with the VITROS hs-cTnI assay (slope=0.85; 95% confidence interval [CI]:0.83–0.88). In serum, the VITROS hs-cTnI concentrations were proportionally lower compared to other hs-cTnI assays, with similar slopes observed between assays in samples frozen <−70 °C for 17 years (ED-study) or in 2020. In the ED-study, the VITROS hs-cTnI assay had an AUC of 0.974 (95%CI:0.929–0.994) for MI, similar to the AUCs of other hs-cTn assays.ConclusionsLack of standardization of hs-cTnI assays across manufacturers is evident. The VITROS hs-cTnI assay yields lower concentrations compared to other hs-cTnI assays. Important differences exist between Li-Hep plasma and serum, with evidence of stability and excellent clinical performance comparable to other hs-cTn assays.

scholarly journals Confirming putative variants at ≤ 5% allele frequency using allele enrichment and Sanger sequencing

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Yan Helen Yan ◽  
Sherry X. Chen ◽  
Lauren Y. Cheng ◽  
Alyssa Y. Rodriguez ◽  
Rui Tang ◽  
...  
Keyword(s):  
Sanger Sequencing ◽  
Limit Of Detection ◽  
High Sensitivity ◽  
Sequencing Errors ◽  
Whole Exome ◽  
Formalin Fixed Paraffin ◽  
Formalin Fixed Paraffin Embedded ◽  
Fresh Frozen ◽  
The Cost ◽  
Allelic Fraction

AbstractWhole exome sequencing (WES) is used to identify mutations in a patient’s tumor DNA that are predictive of tumor behavior, including the likelihood of response or resistance to cancer therapy. WES has a mutation limit of detection (LoD) at variant allele frequencies (VAF) of 5%. Putative mutations called at ≤ 5% VAF are frequently due to sequencing errors, therefore reporting these subclonal mutations incurs risk of significant false positives. Here we performed ~ 1000 × WES on fresh-frozen and formalin-fixed paraffin-embedded (FFPE) tissue biopsy samples from a non-small cell lung cancer patient, and identified 226 putative mutations at between 0.5 and 5% VAF. Each variant was then tested using NuProbe NGSure, to confirm the original WES calls. NGSure utilizes Blocker Displacement Amplification to first enrich the allelic fraction of the mutation and then uses Sanger sequencing to determine mutation identity. Results showed that 52% of the 226 (117) putative variants were disconfirmed, among which 2% (5) putative variants were found to be misidentified in WES. In the 66 cancer-related variants, the disconfirmed rate was 82% (54/66). This data demonstrates Blocker Displacement Amplification allelic enrichment coupled with Sanger sequencing can be used to confirm putative mutations ≤ 5% VAF. By implementing this method, next-generation sequencing can reliably report low-level variants at a high sensitivity, without the cost of high sequencing depth.

scholarly journals The Double Face of Ketamine—The Possibility of Its Identification in Blood and Beverages

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 813
Author(s):  
Magdalena Świądro ◽  
Paweł Stelmaszczyk ◽  
Irena Lenart ◽  
Renata Wietecha-Posłuszny
Keyword(s):  
Date Rape ◽  
Signal To Noise Ratio ◽  
High Sensitivity ◽  
Heroin Addiction ◽  
Assisted Extraction ◽  
Low Concentrations ◽  
High Concentrations ◽  
Rosé Wine ◽  
Tof Ms

The purpose of this study was to develop and validate a high-sensitivity methodology for identifying one of the most used drugs—ketamine. Ketamine is used medicinally to treat depression, alcoholism, and heroin addiction. Moreover, ketamine is the main ingredient used in so-called “date-rape” pills (DRP). This study presents a novel methodology for the simultaneous determination of ketamine based on the Dried Blood Spot (DBS) method, in combination with capillary electrophoresis coupled with a mass spectrometer (CE-TOF-MS). Then, 6-mm circles were punched out from DBS collected on Whatman DMPK-C paper and extracted using microwave-assisted extraction (MAE). The assay was linear in the range of 25–300 ng/mL. Values of limits of detection (LOD = 6.0 ng/mL) and quantification (LOQ = 19.8 ng/mL) were determined based on the signal to noise ratio. Intra-day precision at each determined concentration level was in the range of 6.1–11.1%, and inter-day between 7.9–13.1%. The obtained precision was under 15.0% (for medium and high concentrations) and lower than 20.0% (for low concentrations), which are in accordance with acceptance criteria. Therefore, the DBS/MAE/CE-TOF-MS method was successfully checked for analysis of ketamine in matrices other than blood, i.e., rose wine and orange juice. Moreover, it is possible to identify ketamine in the presence of flunitrazepam, which is the other most popular ingredient used in DRP. Based on this information, the selectivity of the proposed methodology for identifying ketamine in the presence of other components of rape pills was checked.

Sign in / Sign up

Export Citation Format

Share Document