scholarly journals Swelling Studies of Porous and Nonporous Semi-IPN Hydrogels for Sensor and Actuator Applications

Micromachines ◽  
2020 ◽  
Vol 11 (4) ◽  
pp. 425
Author(s):  
Daniela Franke ◽  
Gerald Gerlach
Keyword(s):  
Abrupt Change ◽  
Swelling Behavior ◽  
Template Method ◽  
Swelling Kinetics ◽  
Interpenetrating Network ◽  
Salt Solutions ◽  
Theoretical Assumptions ◽  
Different Temperatures ◽  
Swelling Studies ◽  
Kinetics Of

In this article, we present a semi-interpenetrating network (IPN) hydrogel of reasonable size with improved swelling behavior. The semi-IPN is composed of N-isopropylacrylamide and 2-acrylamido-2-methyl-1-propanesulfonic acid. Porosity was generated chemically by a surfactant-based template method. The swelling behavior was measured after an abrupt change of the temperature to 25 °C or 40 °C or after an abrupt change of the salt concentration of the aqueous medium surrounding the hydrogel samples. A set of static swelling degrees was determined from swelling measurements in salt solutions of varying concentrations and at different temperatures. Introducing porosity to the semi-IPN decreases the swelling times for most measurements while the sensor and actuator characteristics of the hydrogel found in previous studies are preserved. Additionally, we propose theoretical assumptions and explanations regarding the differences in the swelling kinetics of the porous and the nonporous semi-IPN and deduce implications for sensor and actuator applications.

Synthesis, Characterization and Controlled Drug Release of Thermosensitive Poly(NIPAAm-co-HEMA) and IPN(NIPAAm/HEMA) Hydrogels

2006 ◽  
Vol 11-12 ◽  
pp. 737-740 ◽  
Author(s):  
Yuan Xiao Wang ◽  
Xiu Fen Wang ◽  
Shi Wei Song
Keyword(s):  
Drug Release ◽  
Drug Delivery Systems ◽  
Controlled Drug Delivery ◽  
Controlled Drug Release ◽  
Swelling Ratio ◽  
Interpenetrating Network ◽  
Different Temperatures ◽  
Swelling Characteristics ◽  
Kinetics Of

A series of thermo-sensitive copolymers and interpenetrating network hydrogels were prepared using PNIPAAm and HEMA.The effects of the PNIPAAm/HEMA ratio on the swelling ratio ,and deswelling and reswelling kinetics of gels at different temperatures and drug release characteristics in vitro were discussed. The results showed that the copolymer and IPN hydrogels exhibited thermo-sensitive swelling characteristics. Therefore, the hydrogels may be useful in the controlled drug delivery systems.

Effect of Salinity and Temperature on Swelling Behavior of Nano/Micro Polymer Particle

2013 ◽  
Vol 448-453 ◽  
pp. 3993-3997
Author(s):  
Yu Lou ◽  
Wei Yao Zhu ◽  
Xue Ling Zhang ◽  
Yun Qian Long
Keyword(s):  
Oil Recovery ◽  
Polymer Particle ◽  
Swelling Behavior ◽  
Swelling Kinetics ◽  
Swelling Ratio ◽  
Polymer Particles ◽  
Equilibrium Swelling ◽  
Swelling Characteristics ◽  
Equilibrium Swelling Ratio ◽  
Kinetics Of

Nano/micro polymer particles of acrylamide (AM), acrylic acid (AA), methyl methacrylate (MMA) are used to enhance oil recovery. Swelling kinetics of nano/micro polymer particles were investigated through experimental analysis and statistical analysis. The effect of salinity and temperature on swelling behavior over time is studied experimentally. The swelling kinetics of nano/micro polymer particle was described by second order kinetics. Equilibrium swelling ratio and swelling rate were obtained through nonlinear regression. The quantitative relationships between equilibrium swelling ratio and salinity, temperature were presented. Results show that the swelling ratio increases with increasing temperature or decreasing salt concentration. The study provides a direct perspective of swelling characteristics of nano/micro polymer particles for oil recovery enhancement.

Comparative Labelling and Biokinetic Studies of 99mTc-EDTA(Sn) and 99mTc-DTPA(Sn)

1977 ◽  
Vol 16 (01) ◽  
pp. 30-35 ◽  
Author(s):  
N. Agha ◽  
R. B. R. Persson
Keyword(s):  
Complex Formation ◽  
Significant Influence ◽  
Room Temperature ◽  
Ph Value ◽  
Maximum Activity ◽  
Reduction Step ◽  
Labelling Yield ◽  
Different Temperatures ◽  
Kinetics Of

SummaryGelchromatography column scanning has been used to study the fractions of 99mTc-pertechnetate, 99mTcchelate and reduced hydrolyzed 99mTc in preparations of 99mTc-EDTA(Sn) and 99mTc-DTPA(Sn). The labelling yield of 99mTc-EDTA(Sn) chelate was as high as 90—95% when 100 μmol EDTA · H4 and 0.5 (Amol SnCl2 was incubated with 10 ml 99mTceluate for 30—60 min at room temperature. The study of the influence of the pH-value on the fraction of 99mTc-EDTA shows that pH 2.8—2.9 gave the best labelling yield. In a comparative study of the labelling kinetics of 99mTc-EDTA(Sn) and 99mTc- DTPA(Sn) at different temperatures (7, 22 and 37°C), no significant influence on the reduction step was found. The rate constant for complex formation, however, increased more rapidly with increased temperature for 99mTc-DTPA(Sn). At room temperature only a few minutes was required to achieve a high labelling yield with 99mTc-DTPA(Sn) whereas about 60 min was required for 99mTc-EDTA(Sn). Comparative biokinetic studies in rabbits showed that the maximum activity in kidneys is achieved after 12 min with 99mTc-EDTA(Sn) but already after 6 min with 99mTc-DTPA(Sn). The long-term disappearance of 99mTc-DTPA(Sn) from the kidneys is about five times faster than that for 99mTc-EDTA(Sn).

scholarly journals Polyelectrolyte Gels: A Unique Class of Soft Materials

Gels ◽  
2021 ◽  
Vol 7 (3) ◽  
pp. 102
Author(s):  
Ferenc Horkay
Keyword(s):  
Exchange Process ◽  
Interaction Strength ◽  
Soft Materials ◽  
Industrial Applications ◽  
Future Research ◽  
Swelling Kinetics ◽  
Polyelectrolyte Gels ◽  
Ion Exchange Process ◽  
Counter Ions ◽  
Kinetics Of

The objective of this article is to introduce the readers to the field of polyelectrolyte gels. These materials are common in living systems and have great importance in many biomedical and industrial applications. In the first part of this paper, we briefly review some characteristic properties of polymer gels with an emphasis on the unique features of this type of soft material. Unsolved problems and possible future research directions are highlighted. In the second part, we focus on the typical behavior of polyelectrolyte gels. Many biological materials (e.g., tissues) are charged (mainly anionic) polyelectrolyte gels. Examples are shown to illustrate the effect of counter-ions on the osmotic swelling behavior and the kinetics of the swelling of model polyelectrolyte gels. These systems exhibit a volume transition as the concentration of higher valence counter-ions is gradually increased in the equilibrium bath. A hierarchy is established in the interaction strength between the cations and charged polymer molecules according to the chemical group to which the ions belong. The swelling kinetics of sodium polyacrylate hydrogels is investigated in NaCl solutions and in solutions containing both NaCl and CaCl2. In the presence of higher valence counter-ions, the swelling/shrinking behavior of these gels is governed by the diffusion of free ions in the swollen network, the ion exchange process and the coexistence of swollen and collapsed states.

scholarly journals Thermodynamic and detailed kinetic study of the formation of orthophthalaldehyde-agmatine complex by fluorescence intensities

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Khémesse Kital ◽  
Moumouny Traoré ◽  
Diégane Sarr ◽  
Moussa Mbaye ◽  
Mame Diabou Gaye Seye ◽  
...  
Keyword(s):  
Complex Formation ◽  
Thermodynamic Parameters ◽  
Initial Rate ◽  
Reaction Medium ◽  
Standard Entropy ◽  
Step Size ◽  
Formation Reaction ◽  
Different Temperatures ◽  
Kinetics Of ◽  
Complex Formation Process

Abstract The aim of this work is to determine the thermodynamic parameters and the kinetics of complex formation between orthophthalaldehyde (OPA) and agmatine (AGM) in an alkaline medium (pH 13). Firstly, the association constant (Ka) between orthophthalaldehyde and agmatine was determined at different temperatures (between 298 K and 338 K) with a step size of 10 K. Secondly, the thermodynamic parameters such as standard enthalpy (ΔH°), standard entropy (ΔS°),and Gibbs energy (∆G) were calculated, where a positive value of ΔH° (+45.50 kJ/mol) was found, which shows that the reaction is endothermic. In addition, the low value of ΔS°(+0.24 kJ/mol) indicates a slight increase in the disorder in the reaction medium. Furthermore, the negative values of ΔG between −35.62 kJ/mol and −26.02 kJ/mol show that the complex formation process is spontaneous. Finally, the parameters of the kinetics of the reaction between OPA and AGM were determined as follows: when the initial concentration of AGM (5 × 10−6 M) is equal to that of the OPA, the results show that the reaction follows an overall 1.5 order kinetics with an initial rate of 5.1 × 10−7Mmin−1 and a half-life of 8.12 min. The partial order found in relation to the AGM is 0.8. This work shows that the excess of OPA accelerates the formation reaction of the complex.

scholarly journals Torrefaction Thermogravimetric Analysis and Kinetics of Sorghum Distilled Residue for Sustainable Fuel Production

2021 ◽  
Vol 13 (8) ◽  
pp. 4246
Author(s):  
Shih-Wei Yen ◽  
Wei-Hsin Chen ◽  
Jo-Shu Chang ◽  
Chun-Fong Eng ◽  
Salman Raza Naqvi ◽  
...  
Keyword(s):  
Kinetic Model ◽  
Pso Algorithm ◽  
Nitrogen Atmosphere ◽  
Computational Method ◽  
Weight Changes ◽  
Design And Optimization ◽  
Thermogravimetric Analyzer ◽  
Model Free ◽  
Different Temperatures ◽  
Kinetics Of

This study investigated the kinetics of isothermal torrefaction of sorghum distilled residue (SDR), the main byproduct of the sorghum liquor-making process. The samples chosen were torrefied isothermally at five different temperatures under a nitrogen atmosphere in a thermogravimetric analyzer. Afterward, two different kinetic methods, the traditional model-free approach, and a two-step parallel reaction (TPR) kinetic model, were used to obtain the torrefaction kinetics of SDR. With the acquired 92–97% fit quality, which is the degree of similarity between calculated and real torrefaction curves, the traditional method approached using the Arrhenius equation showed a poor ability on kinetics prediction, whereas the TPR kinetic model optimized by the particle swarm optimization (PSO) algorithm showed that all the fit qualities are as high as 99%. The results suggest that PSO can simulate the actual torrefaction kinetics more accurately than the traditional kinetics approach. Moreover, the PSO method can be further employed for simulating the weight changes of reaction intermediates throughout the process. This computational method could be used as a powerful tool for industrial design and optimization in the biochar manufacturing process.

scholarly journals Hydrothermal Ageing and Its Effect on Fracture Load of Zirconia Dental Implants

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3103
Author(s):  
Laurent Gremillard ◽  
Agnès Mattlet ◽  
Alexandre Mathevon ◽  
Damien Fabrègue ◽  
Bruno Zberg ◽  
...  
Keyword(s):  
Dental Implants ◽  
Fracture Load ◽  
Accelerated Ageing ◽  
Dental Ceramics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dental Restorations ◽  
Different Temperatures ◽  
Mechanical Performances ◽  
Kinetics Of

Due to growing demand for metal-free dental restorations, dental ceramics, especially dental zirconia, represent an increasing share of the dental implants market. They may offer mechanical performances of the same range as titanium ones. However, their use is still restricted by a lack of confidence in their durability and, in particular, in their ability to resist hydrothermal ageing. In the present study, the ageing kinetics of commercial zirconia dental implants are characterized by X-ray diffraction after accelerated ageing in an autoclave at different temperatures, enabling their extrapolation to body temperature. Measurements of the fracture loads show no effect of hydrothermal ageing even after ageing treatments simulated a 90-year implantation.

Effects of additives on the cure kinetics of vinyl ester pultrusion resins

2021 ◽  
pp. 002199832110015
Author(s):  
Alexander Vedernikov ◽  
Yaroslav Nasonov ◽  
Roman Korotkov ◽  
Sergey Gusev ◽  
Iskander Akhatov ◽  
...  
Keyword(s):  
Vinyl Ester ◽  
Mean Squared Error ◽  
Cure Kinetics ◽  
Zinc Stearate ◽  
Heating Rates ◽  
Scanning Calorimetry ◽  
Different Temperatures ◽  
Predicted Values ◽  
Kinetics Of ◽  
Final Degree

Pultrusion is a highly efficient composite manufacturing process. To accurately describe pultrusion, an appropriate model of resin cure kinetics is required. In this study, we investigated cure kinetics modeling of a vinyl ester pultrusion resin (Atlac 430) in the presence of aluminum hydroxide (Al(OH)3) and zinc stearate (Zn(C18H35O2)2) as processing additives. Herein, four different resin compositions were studied: neat resin composition, composition with Al(OH)3, composition comprising Zn(C18H35O2)2, and composition containing both Al(OH)3 and Zn(C18H35O2)2. To analyze each composition, we performed differential scanning calorimetry at the heating rates of 5, 7.5, and 10 K/min. To characterize the cure kinetics of Atlac 430, 16 kinetic models were tested, and their performances were compared. The model based on the [Formula: see text]th-order autocatalytic reaction demonstrated the best results, with a 4.5% mean squared error (MSE) between the experimental and predicted data. This study proposes a method to reduce the MSE resulting from the simultaneous melting of Zn(C18H35O2)2. We were able to reduce the MSE by approximately 34%. Numerical simulations conducted at different temperatures and pulling speeds demonstrated a significant influence of resin composition on the pultrusion of a flat laminate profile. Simulation results obtained for the 600 mm long die block at different die temperatures (115, 120, 125, and 130 °C) showed that for a resin with a final degree of cure exceeding 95% at the die exit, the maximum difference between the predicted values of pulling speed for a specified set of compositions may exceed 1.7 times.

Sign in / Sign up

Export Citation Format

Share Document