scholarly journals Additive Manufacturing of Micromanipulator Mounted on a Glass Capillary for Biological Applications

Micromachines ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 174
Author(s):  
Shingo Kozaki ◽  
Yukihito Moritoki ◽  
Taichi Furukawa ◽  
Hikaru Akieda ◽  
Tatsuto Kageyama ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing System ◽  
Three Dimensional ◽  
Blue Laser ◽  
Glass Capillary ◽  
Multicellular Spheroids ◽  
Engineering Research ◽  
Minimal Damage ◽  
Capture And Release ◽  
Tissue Engineering Research

In this study, a three-dimensional (3D) micromanipulator mounted on a glass capillary is developed for handling biological samples, such as multicellular spheroids and embryos. To fabricate the micromanipulator, we developed an additive manufacturing system based on high-resolution microstereolithography using a 405-nm blue laser. The fabrication system makes it possible to fabricate 3D microstructures on a glass capillary with 2.5 µm lateral resolution and 25 µm layer thickness. We also demonstrated the capture and release of a spheroid with the micromanipulator fabricated using our additive manufacturing system. We showed that spheroids can be easily handled by a simple operation with minimal damage using a cage-like multiple finger structure. Additive manufacturing of tailor-made micromanipulators mounted on a glass capillary will be useful in biological and tissue engineering research.

scholarly journals Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Min Yang ◽  
Lu Wang ◽  
Wentao Yan
Keyword(s):  
Additive Manufacturing ◽  
Phase Field ◽  
Field Model ◽  
Three Dimensional ◽  
Phase Field Model ◽  
Nucleation Theory ◽  
Experimental Result ◽  
Classical Nucleation Theory ◽  
Validation Experiment ◽  
Powder Particles

AbstractA three-dimensional phase-field model is developed to simulate grain evolutions during powder-bed-fusion (PBF) additive manufacturing, while the physically-informed temperature profile is implemented from a thermal-fluid flow model. The phase-field model incorporates a nucleation model based on classical nucleation theory, as well as the initial grain structures of powder particles and substrate. The grain evolutions during the three-layer three-track PBF process are comprehensively reproduced, including grain nucleation and growth in molten pools, epitaxial growth from powder particles, substrate and previous tracks, grain re-melting and re-growth in overlapping zones, and grain coarsening in heat-affected zones. A validation experiment has been carried out, showing that the simulation results are consistent with the experimental results in the molten pool and grain morphologies. Furthermore, the grain refinement by adding nanoparticles is preliminarily reproduced and compared against the experimental result in literature.

scholarly journals Efficient 3D printing via photooxidation of ketocoumarin based photopolymerization

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Xiaoyu Zhao ◽  
Ye Zhao ◽  
Ming-De Li ◽  
Zhong’an Li ◽  
Haiyan Peng ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Visible Light ◽  
Light Exposure ◽  
Three Dimensional ◽  
3D Printer ◽  
Light Penetration ◽  
Viable Solution

AbstractPhotopolymerization-based three-dimensional (3D) printing can enable customized manufacturing that is difficult to achieve through other traditional means. Nevertheless, it remains challenging to achieve efficient 3D printing due to the compromise between print speed and resolution. Herein, we report an efficient 3D printing approach based on the photooxidation of ketocoumarin that functions as the photosensitizer during photopolymerization, which can simultaneously deliver high print speed (5.1 cm h−1) and high print resolution (23 μm) on a common 3D printer. Mechanistically, the initiating radical and deethylated ketocoumarin are both generated upon visible light exposure, with the former giving rise to rapid photopolymerization and high print speed while the latter ensuring high print resolution by confining the light penetration. By comparison, the printed feature is hard to identify when the ketocoumarin encounters photoreduction due to the increased lateral photopolymerization. The proposed approach here provides a viable solution towards efficient additive manufacturing by controlling the photoreaction of photosensitizers during photopolymerization.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

Three-dimensional Growth of Renal Epithelial Cells in Vitro: A Tool in Toxicity Testing

1993 ◽  
Vol 21 (2) ◽  
pp. 191-195 ◽  
Author(s):  
Knut-Jan Andersen ◽  
Erik Ilsø Christensen ◽  
Hogne Vik
Keyword(s):  
Epithelial Cells ◽  
Three Dimensional ◽  
Toxicity Testing ◽  
Renal Tissue ◽  
Epithelial Cell Line ◽  
Multicellular Spheroids ◽  
Renal Epithelial Cell ◽  
Renal Epithelial Cells

The tissue culture of multicellular spheroids from the renal epithelial cell line LLC-PK1 (proximal tubule) is described. This represents a biological system of intermediate complexity between renal tissue in vivo and simple monolayer cultures. The multicellular structures, which show many similarities to kidney tubules in vivo, including a vectorial water transport, should prove useful for studying the potential nephrotoxicity of drugs and chemicals in vitro. In addition, the propagation of renal epithelial cells as multicellular spheroids in serum-free culture may provide information on the release of specific biological parameters, which may be suppressed or masked in serum-supplemented media.

scholarly journals Acoustic Cell Patterning in Hydrogel for Three-Dimensional Cell Network Formation

Micromachines ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 3
Author(s):  
Kyo-in Koo ◽  
Andreas Lenshof ◽  
Le Thi Huong ◽  
Thomas Laurell
Keyword(s):  
Network Formation ◽  
Umbilical Vein ◽  
Three Dimensional ◽  
Extrusion Process ◽  
Fibroblast Cells ◽  
Glass Capillary ◽  
Cell Network ◽  
Significant Difference ◽  
The One ◽  
Umbilical Vein Endothelial Cells

In the field of engineered organ and drug development, three-dimensional network-structured tissue has been a long-sought goal. This paper presents a direct hydrogel extrusion process exposed to an ultrasound standing wave that aligns fibroblast cells to form a network structure. The frequency-shifted (2 MHz to 4 MHz) ultrasound actuation of a 400-micrometer square-shaped glass capillary that was continuously perfused by fibroblast cells suspended in sodium alginate generated a hydrogel string, with the fibroblasts aligned in single or quadruple streams. In the transition from the one-cell stream to the four-cell streams, the aligned fibroblast cells were continuously interconnected in the form of a branch and a junction. The ultrasound-exposed fibroblast cells displayed over 95% viability up to day 10 in culture medium without any significant difference from the unexposed fibroblast cells. This acoustofluidic method will be further applied to create a vascularized network by replacing fibroblast cells with human umbilical vein endothelial cells.

scholarly journals Prevention of Post-Operative Adhesions: A Comprehensive Review of Present and Emerging Strategies

Biomolecules ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1027
Author(s):  
Ali Fatehi Hassanabad ◽  
Anna N. Zarzycki ◽  
Kristina Jeon ◽  
Jameson A. Dundas ◽  
Vishnu Vasanthan ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Financial Burden ◽  
Adhesion Formation ◽  
Length Of Hospital Stay ◽  
Engineering Research ◽  
Surgical Adhesions ◽  
Preventative Strategy ◽  
Underlying Mechanisms ◽  
And Personalized Medicine ◽  
Tissue Engineering Research

Post-operative adhesions affect patients undergoing all types of surgeries. They are associated with serious complications, including higher risk of morbidity and mortality. Given increased hospitalization, longer operative times, and longer length of hospital stay, post-surgical adhesions also pose a great financial burden. Although our knowledge of some of the underlying mechanisms driving adhesion formation has significantly improved over the past two decades, literature has yet to fully explain the pathogenesis and etiology of post-surgical adhesions. As a result, finding an ideal preventative strategy and leveraging appropriate tissue engineering strategies has proven to be difficult. Different products have been developed and enjoyed various levels of success along the translational tissue engineering research spectrum, but their clinical translation has been limited. Herein, we comprehensively review the agents and products that have been developed to mitigate post-operative adhesion formation. We also assess emerging strategies that aid in facilitating precision and personalized medicine to improve outcomes for patients and our healthcare system.

ELECTROSPINNING OF BIOMATERIALS AND THEIR APPLICATIONS IN TISSUE ENGINEERING

Nano LIFE ◽  
2012 ◽  
Vol 02 (04) ◽  
pp. 1230010 ◽  
Author(s):  
JEN-CHIEH WU ◽  
H. PETER LORENZ
Keyword(s):  
Tissue Engineering ◽  
Electrospinning Process ◽  
Polymer Fibers ◽  
Nanometer Scale ◽  
High Porosity ◽  
Electrospinning Technique ◽  
Engineering Research ◽  
Fibrous Scaffolds ◽  
Surface Areas ◽  
Tissue Engineering Research

Electrospinning is a process for generating micrometer or nanometer scale polymer fibers with large surface areas and high porosity. For tissue engineering research, the electrospinning technique provides a quick way to fabricate fibrous scaffolds with dimensions comparable to the extracellular matrix (ECM). A variety of materials can be used in the electrospinning process, including natural biomaterials as well as synthetic polymers. The natural biomaterials have advantages such as excellent biocompatibility and biodegradability, which can be more suitable for making biomimic scaffolds. In the last two decades, there have been growing numbers of studies of biomaterial fibrous scaffolds using the electrospinning process. In this review, we will discuss biomaterials in the electrospinning process and their applications in tissue engineering.

Evaluation of Parts Produced by a Novel Additive Manufacturing Process

2013 ◽  
Vol 315 ◽  
pp. 63-67 ◽  
Author(s):  
Muhammad Fahad ◽  
Neil Hopkinson
Keyword(s):  
Additive Manufacturing ◽  
Rapid Prototyping ◽  
Manufacturing Process ◽  
High Speed ◽  
Three Dimensional ◽  
Coordinate Measuring Machine ◽  
Layer By Layer ◽  
Nylon 12 ◽  
Measuring Machine ◽  
End Use

Rapid prototyping refers to building three dimensional parts in a tool-less, layer by layer manner using the CAD geometry of the part. Additive Manufacturing (AM) is the name given to the application of rapid prototyping technologies to produce functional, end use items. Since AM is relatively new area of manufacturing processes, various processes are being developed and analyzed for their performance (mainly speed and accuracy). This paper deals with the design of a new benchmark part to analyze the flatness of parts produced on High Speed Sintering (HSS) which is a novel Additive Manufacturing process and is currently being developed at Loughborough University. The designed benchmark part comprised of various features such as cubes, holes, cylinders, spheres and cones on a flat base and the build material used for these parts was nylon 12 powder. Flatness and curvature of the base of these parts were measured using a coordinate measuring machine (CMM) and the results are discussed in relation to the operating parameters of the process.The result show changes in the flatness of part with the depth of part in the bed which is attributed to the thermal gradient within the build envelope during build.

scholarly journals Advances in 3D Printing for Tissue Engineering

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3149
Author(s):  
Angelika Zaszczyńska ◽  
Maryla Moczulska-Heljak ◽  
Arkadiusz Gradys ◽  
Paweł Sajkiewicz
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Complex Structure ◽  
Three Dimensional ◽  
Computer Assisted ◽  
Scaffold Fabrication ◽  
Manufacturing Techniques ◽  
Printing Techniques ◽  
State Of Art

Tissue engineering (TE) scaffolds have enormous significance for the possibility of regeneration of complex tissue structures or even whole organs. Three-dimensional (3D) printing techniques allow fabricating TE scaffolds, having an extremely complex structure, in a repeatable and precise manner. Moreover, they enable the easy application of computer-assisted methods to TE scaffold design. The latest additive manufacturing techniques open up opportunities not otherwise available. This study aimed to summarize the state-of-art field of 3D printing techniques in applications for tissue engineering with a focus on the latest advancements. The following topics are discussed: systematics of the available 3D printing techniques applied for TE scaffold fabrication; overview of 3D printable biomaterials and advancements in 3D-printing-assisted tissue engineering.

Sign in / Sign up

Export Citation Format

Share Document