scholarly journals 3D Microlithography Using an Integrated System of 5-mm UV-LEDs with a Tilt-Rotational Sample Holder

Micromachines ◽  
2020 ◽  
Vol 11 (2) ◽  
pp. 157 ◽  
Author(s):  
Sabera Fahmida Shiba ◽  
Hyeongmin Jeon ◽  
Jong-Soo Kim ◽  
Jong-Eun Kim ◽  
Jungkwun Kim
Keyword(s):  
Light Source ◽  
Light Emitting Diode ◽  
Vertical Direction ◽  
Ultra Violet ◽  
Integrated System ◽  
Sample Holder ◽  
Large Area ◽  
Light Emitting ◽  
Uv Led ◽  
Uv Leds

This paper demonstrates a 3D microlithography system where an array of 5 mm Ultra Violet-Light Emitting Diode (UV-LED) acts as a light source. The unit of the light source is a UV-LED, which comes with a length of about 8.9 mm and a diameter of 5 mm. The whole light source comprises 20 × 20 matrix of such 5 mm UV-LEDs giving a total number of 400 LEDs which makes it a very favorable source with a large area for having a batch production of the desired microstructures. This light source is able to give a level of precision in microfabrication which cannot be obtained using commercial 3D printers. The whole light source performs continuous rotational movement once it is turned on. This can also move up and down in a vertical direction. This multidirectional light source also comprises a multidirectional sample holder. The light source teaming up with the multidirectional sample holder highly facilitates the process of fabrication of a huge range of 3D structures. This article also describes the different levels of characterization of the system and demonstrates several fabricated 3D microstructures including high aspect ratio vertical micro towers, twisted turbine structures, triangles, inclined pillar ‘V’ structures, and hollow horn structures as well.

scholarly journals Colour-Encoded Electroluminescent White Light-emitting Diode Enabled by Perovskite-Cu-In-S Quantum Composites

2021 ◽  
Author(s):  
Seung-Bum Cho ◽  
Jung Inn Sohn ◽  
Sang-Seok Lee ◽  
Seung-Gyun Moon ◽  
Bo Hou ◽  
...  
Keyword(s):  
Quantum Dot ◽  
Light Source ◽  
White Light ◽  
Light Emitting Diodes ◽  
Light Emitting Diode ◽  
Large Area ◽  
Solution Processed ◽  
Light Emitting ◽  
Ambient Lighting ◽  
White Light Emitting Diodes

Solution-processed quantum dot (QD) white light-emitting diodes (WLEDs) have received much attention as a viable light source in the next-generation large-area ambient lighting, flexible photonics and full-colour display backlighting technologies....

scholarly journals Photo-Sintered Silver Thin Films by a High-Power UV-LED Module for Flexible Electronic Applications

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2840
Author(s):  
Minha Kim ◽  
Hongsub Jee ◽  
Jaehyeong Lee
Keyword(s):  
Light Source ◽  
High Power ◽  
Large Scale ◽  
Light Emitting Diode ◽  
Flash Lamp ◽  
Sintering Process ◽  
Large Area ◽  
Xenon Flash Lamp ◽  
Uv Led ◽  
Xenon Flash

In recent printed electronics technology, a photo-sintering technique using intense pulsed light (IPL) source has attracted attention, instead of conventional a thermal sintering process with long time and high temperature. The key principle of the photo-sintering process is the selective heating of a thin film with large light absorption coefficients, while a transparent substrate does not heat by the IPL source. Most research on photo-sintering has used a xenon flash lamp as a light source. However, the xenon flash lamp requires instantaneous high power and is unsuitable for large area applications. In this work, we developed a new photo-sintering system using a high-power ultraviolet light emitting diode (UV-LED) module. A LED light source has many merits such as low power consumption and potential large-scale application. The silver nanoparticles ink was inkjet-printed on a polyethylene terephthalate (PET) and photo-sintered by the UV-LED module with the wavelength of 365 and 385 nm. The electrical resistivity as low as 5.44 × 10−6 Ω·cm (just about three times compared to value of bulk silver) was achieved at optimized photo-sintering conditions (wavelength of 365 nm and light intensity of 300 mW/cm2).

scholarly journals Ultra-violet light-emitting diode calibration system for timing large area scintillation detectors

2017 ◽  
Vol 798 ◽  
pp. 012013
Author(s):  
P Yu Naumov ◽  
M F Runtso ◽  
P P Naumov ◽  
E F Maklyaev ◽  
V A Kaplin ◽  
...  
Keyword(s):  
Light Emitting Diode ◽  
Ultra Violet ◽  
Scintillation Detectors ◽  
Calibration System ◽  
Large Area ◽  
Light Emitting ◽  
Ultra Violet Light ◽  
Violet Light

scholarly journals Design of a Secondary Freeform Lens of UV LED Mosquito-Trapping Lamp for Enhancing Trapping Efficiency

Crystals ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 335 ◽  
Author(s):  
Wei-Hsiung Tseng ◽  
Diana Juan ◽  
Wei-Cheng Hsiao ◽  
Cheng-Han Chan ◽  
Hsin-Yi Ma ◽  
...  
Keyword(s):  
Light Intensity ◽  
Intensity Distribution ◽  
Light Emitting Diode ◽  
Trapping Efficiency ◽  
Axially Symmetric ◽  
Light Intensity Distribution ◽  
Light Emitting ◽  
Led Light ◽  
Uv Led ◽  
Freeform Lens

In this study, our proposed ultraviolet light-emitting diode (UV LED) mosquito-trapping lamp is designed to control diseases brought by insects such as mosquitoes. In order to enable the device to efficiently catch mosquitoes in a wider area, a secondary freeform lens (SFL) is designed for UV LED. The lens is mounted on a 3 W UV LED light bar as a mosquito-trapping lamp of the new UV LED light bar module to achieve axially symmetric light intensity distribution. The special SFL is used to enhance the trapping capabilities of the mosquito-trapping lamp. The results show that when the secondary freeform surface lens is applied to the experimental outdoor UV LED mosquito-trapping lamp, the trapping range can be expanded to 100π·m2 and the captured mosquitoes increased by about 300%.

Comparison of the effects of operating microscopes with light emitting diode and halogen light source on the eye: a rabbit study

2021 ◽  
pp. 1-7
Author(s):  
Bahri Aydın ◽  
Armagan Ozgur ◽  
Huseyin Baran Ozdemir ◽  
Pınar Uyar Gocun ◽  
Mehmet Arda Inan ◽  
...  
Keyword(s):  
Light Source ◽  
Light Emitting Diode ◽  
Light Emitting ◽  
Halogen Light ◽  
Halogen Light Source

scholarly journals Influences of Spectral Power Distribution on Circadian Energy, Visual Comfort and Work Performance

2021 ◽  
Vol 13 (9) ◽  
pp. 4852
Author(s):  
Jack Ngarambe ◽  
Inhan Kim ◽  
Geun Young Yun
Keyword(s):  
Light Source ◽  
Power Distribution ◽  
Work Performance ◽  
Spectral Power ◽  
Light Emitting Diode ◽  
Essential Element ◽  
Visual Comfort ◽  
Light Emitting ◽  
Organic Light Emitting Diode ◽  
Spectral Power Distribution

Spectral power distribution (SPD) is an essential element that has considerable implications on circadian energy and the perception of lit environments. The present study assessed the potential influences of SPD on energy consumption (i.e., considering circadian energy), visual comfort, work performance and mood. Two lighting conditions based on light-emitting diode (LED) and organic light-emitting diode (OLED) were used as proxies for SPDs of different spectral content: dominant peak wavelength of 455 nm (LED) and 618 nm (OLED). Using measured photometric values, the circadian light (CL), melatonin suppression (MS), and circadian efficacy (CE) of the two lighting sources were estimated via a circadian-phototransduction model and compared. Additionally, twenty-six participants were asked to evaluate the said lit environments subjectively in terms of visual comfort and self-reported work performance. Regarding circadian lighting and the associated energy implications, the LED light source induced higher biological actions with relatively less energy than the OLED light source. For visual comfort, OLED lighting-based conditions were preferred to LED lighting-based conditions, while the opposite was true when considering work performance and mood. The current study adds to the on-going debate regarding human-centric lighting, particularly considering the role of SPD in energy-efficient and circadian lighting practices.

scholarly journals Optimal Color Lighting for Scanning Images of Flat Panel Display using Simplex Search

2018 ◽  
Vol 4 (11) ◽  
pp. 133
Author(s):  
HyungTae Kim ◽  
EungJoo Ha ◽  
KyungChan Jin ◽  
ByungWook Kim
Keyword(s):  
Image Quality ◽  
Light Source ◽  
Light Emitting Diode ◽  
Optical Filters ◽  
Flat Panel Display ◽  
Flat Panel ◽  
Light Emitting ◽  
Simplex Search ◽  
Inspection Systems ◽  
Color Control

A system for inspecting flat panel displays (FPDs) acquires scanning images using multiline charge-coupled device (CCD) cameras and industrial machine vision. Optical filters are currently installed in front of these inspection systems to obtain high-quality images. However, the combination of optical filters required is determined manually and by using empirical methods; this is referred to as passive color control. In this study, active color control is proposed for inspecting FPDs. This inspection scheme requires the scanning of images, which is achieved using a mixed color light source and a mixing algorithm. The light source utilizes high-power light emitting diodes (LEDs) of multiple colors and a communication port to dim their level. Mixed light illuminates an active-matrix organic light-emitting diode (AMOLED) panel after passing through a beam expander and after being shaped into a line beam. The image quality is then evaluated using the Tenenbaum gradient after intensity calibration of the scanning images. The dimming levels are determined using the simplex search method which maximizes the image quality. The color of the light was varied after every scan of an AMOLED panel, and the variation was iterated until the image quality approached a local maximization. The number of scans performed was less than 225, while the number of dimming level combinations was 20484. The proposed method can reduce manual tasks in setting-up inspection machines, and hence is useful for the inspection machines in FPD processes.

scholarly journals 310 nm UV-LEDs attenuate imiquimod-induced psoriasis-like skin lesions in C57BL/6 mice and inhibit IL-22-induced STAT3 expression in HaCaT cells

2020 ◽  
Vol 19 (8) ◽  
pp. 1009-1021
Author(s):  
Tae-Rin Kwon ◽  
Sung-Eun Lee ◽  
Jong Hwan Kim ◽  
You Na Jang ◽  
Su-Young Kim ◽  
...  
Keyword(s):  
Light Source ◽  
Ultraviolet Light ◽  
Light Emitting Diodes ◽  
Skin Lesions ◽  
Hacat Cells ◽  
Light Emitting ◽  
Uv Leds ◽  
Ultraviolet Light Emitting Diodes

Ultraviolet light-emitting diodes (UV-LEDs) are a novel light source for phototherapy.

Sign in / Sign up

Export Citation Format

Share Document