scholarly journals Advanced Polymers for Three-Dimensional (3D) Organ Bioprinting

Micromachines ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 814 ◽  
Author(s):  
Xiaohong Wang
Keyword(s):  
Network Formation ◽  
Three Dimensional ◽  
Cell Types ◽  
High Throughput Drug Screening ◽  
Physiological Properties ◽  
Bioartificial Organs ◽  
Adult Cell ◽  
3D Printed ◽  
Bioactive Agents ◽  
Core Issues

Three-dimensional (3D) organ bioprinting is an attractive scientific area with huge commercial profit, which could solve all the serious bottleneck problems for allograft transplantation, high-throughput drug screening, and pathological analysis. Integrating multiple heterogeneous adult cell types and/or stem cells along with other biomaterials (e.g., polymers, bioactive agents, or biomolecules) to make 3D constructs functional is one of the core issues for 3D bioprinting of bioartificial organs. Both natural and synthetic polymers play essential and ubiquitous roles for hierarchical vascular and neural network formation in 3D printed constructs based on their specific physical, chemical, biological, and physiological properties. In this article, several advanced polymers with excellent biocompatibility, biodegradability, 3D printability, and structural stability are reviewed. The challenges and perspectives of polymers for rapid manufacturing of complex organs, such as the liver, heart, kidney, lung, breast, and brain, are outlined.

scholarly journals Progress of 3D Bioprinting in Organ Manufacturing

Polymers ◽  
2021 ◽  
Vol 13 (18) ◽  
pp. 3178
Author(s):  
Dabin Song ◽  
Yukun Xu ◽  
Siyu Liu ◽  
Liang Wen ◽  
Xiaohong Wang
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Research Progress ◽  
Layer By Layer ◽  
3D Bioprinting ◽  
Bioartificial Organs ◽  
Computer Aided ◽  
Bioactive Agents ◽  
Living Tissues ◽  
Aided Design

Three-dimensional (3D) bioprinting is a family of rapid prototyping technologies, which assemble biomaterials, including cells and bioactive agents, under the control of a computer-aided design model in a layer-by-layer fashion. It has great potential in organ manufacturing areas with the combination of biology, polymers, chemistry, engineering, medicine, and mechanics. At present, 3D bioprinting technologies can be used to successfully print living tissues and organs, including blood vessels, skin, bones, cartilage, kidney, heart, and liver. The unique advantages of 3D bioprinting technologies for organ manufacturing have improved the traditional medical level significantly. In this article, we summarize the latest research progress of polymers in bioartificial organ 3D printing areas. The important characteristics of the printable polymers and the typical 3D bioprinting technologies for several complex bioartificial organs, such as the heart, liver, nerve, and skin, are introduced.

scholarly journals Construction of three-dimensional printed anatomic models for frontal sinus education

2019 ◽  
Vol 33 (1) ◽  
pp. 80-84
Author(s):  
Christopher M Low ◽  
Garret Choby ◽  
Megan Viozzi ◽  
Jonathan M Morris
Keyword(s):  
Frontal Sinus ◽  
Low Cost ◽  
Three Dimensional ◽  
Cell Types ◽  
Self Study ◽  
Hands On ◽  
Tactile Learning ◽  
Hands On Learning ◽  
3D Printed ◽  
Air Cells

Background The anatomy of the frontal sinus can pose a challenge for many neuroradiolgists and otolaryngologists, especially trainees. While much of resident education occurs in didactics, self-study or in the operating room, studies suggest that some trainees prefer hands-on learning. Three-dimensional (3D) printing technology provides users the opportunity to make customizable low-cost objects that provide tactile learning—a learning modality that may be preferable in education. Methods Three-dimensional printed models of frontal sinus anatomy based on selected patient computed tomography scans that represent various air cells according to the International Frontal Sinus Classification (IFAC) as different colored solid structures were printed using binder jetting. Results Seven unique de-identified patient scans were selected as the basis for the models so that all frontal cell types described in the IFAC scheme are represented between all 3D printed models. Conclusion This paper describes the technology and process necessary to create these models.

SEM of Hepatocytes and Biliary Passages in Goldfish Liver

1977 ◽  
Vol 35 ◽  
pp. 556-557
Author(s):  
Waykin Nopanitaya ◽  
Joe W. Grisham ◽  
Johnny L. Carson
Keyword(s):  
Carassius Auratus ◽  
Cell Layer ◽  
Three Dimensional ◽  
Cell Types ◽  
Biliary System ◽  
Fish Food ◽  
Commercial Fish ◽  
Goldfish Carassius Auratus ◽  
Commercial Fish Food

An interesting feature of the goldfish liver is the morphology of the hepatic plate, which is always formed by a two-cell layer of hepatocytes. Hepatic plates of the goldfish liver contain an infrequently seen second type of cell, in the centers of plates between two hepatocytes. A TEH study by Yamamoto (1) demonstrated ultrastructural differences between hepatocytes and centrally located cells in hepatic plates; the latter were classified as ductule cells of the biliary system. None of the previous studies clearly showed a three-dimensional organization of the two cell types described. In the present investigation we utilize SEM to elucidate the arrangement of hepatocytes and bile ductular cells in intralobular plates of goldfish liver.Livers from young goldfish (Carassius auratus), about 6-10 cm, fed commercial fish food were used for this study. Hepatic samples were fixed in 4% buffered paraformaldehyde, cut into pieces, fractured, osmicated, CPD, mounted Au-Pd coated, and viewed by SEM at 17-20 kV. Our observations were confined to the ultrastructure of biliary passages within intralobular plates, ductule cells, and hepatocytes.

Epithelial Organotypic Cultures: A Viable Model to Address Mechanisms of Carcinogenesis by Epitheliotropic Viruses

2018 ◽  
Vol 18 (4) ◽  
pp. 246-255 ◽  
Author(s):  
Lara Termini ◽  
Enrique Boccardo
Keyword(s):  
Three Dimensional ◽  
Cell Types ◽  
Experimental Models ◽  
Biological Research ◽  
Specific Gene ◽  
Specific Cell ◽  
Organotypic Cultures ◽  
Skin Physiology

In vitro culture of primary or established cell lines is one of the leading techniques in many areas of basic biological research. The use of pure or highly enriched cultures of specific cell types obtained from different tissues and genetics backgrounds has greatly contributed to our current understanding of normal and pathological cellular processes. Cells in culture are easily propagated generating an almost endless source of material for experimentation. Besides, they can be manipulated to achieve gene silencing, gene overexpression and genome editing turning possible the dissection of specific gene functions and signaling pathways. However, monolayer and suspension cultures of cells do not reproduce the cell type diversity, cell-cell contacts, cell-matrix interactions and differentiation pathways typical of the three-dimensional environment of tissues and organs from where they were originated. Therefore, different experimental animal models have been developed and applied to address these and other complex issues in vivo. However, these systems are costly and time consuming. Most importantly the use of animals in scientific research poses moral and ethical concerns facing a steadily increasing opposition from different sectors of the society. Therefore, there is an urgent need for the development of alternative in vitro experimental models that accurately reproduce the events observed in vivo to reduce the use of animals. Organotypic cultures combine the flexibility of traditional culture systems with the possibility of culturing different cell types in a 3D environment that reproduces both the structure and the physiology of the parental organ. Here we present a summarized description of the use of epithelial organotypic for the study of skin physiology, human papillomavirus biology and associated tumorigenesis.

Use of Three-dimensional Printing in the Development of Optimal Cardiac CT Scanning Protocols

2020 ◽  
Vol 16 (8) ◽  
pp. 967-977
Author(s):  
Zhonghua Sun
Keyword(s):  
Cardiovascular Disease ◽  
Cardiac Computed Tomography ◽  
Three Dimensional ◽  
Ct Scanning ◽  
Aortic Diseases ◽  
Clinical Value ◽  
Three Dimensional Printing ◽  
Doctor Patient Communication ◽  
Medical Education And Training ◽  
3D Printed

Three-dimensional (3D) printing is increasingly used in medical applications with most of the studies focusing on its applications in medical education and training, pre-surgical planning and simulation, and doctor-patient communication. An emerging area of utilising 3D printed models lies in the development of cardiac computed tomography (CT) protocols for visualisation and detection of cardiovascular disease. Specifically, 3D printed heart and cardiovascular models have shown potential value in the evaluation of coronary plaques and coronary stents, aortic diseases and detection of pulmonary embolism. This review article provides an overview of the clinical value of 3D printed models in these areas with regard to the development of optimal CT scanning protocols for both diagnostic evaluation of cardiovascular disease and reduction of radiation dose. The expected outcomes are to encourage further research towards this direction.

scholarly journals A Novel Pseudomonas geniculata AGE Family Epimerase/Isomerase and Its Application in d-Mannose Synthesis

Foods ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 1809
Author(s):  
Zhanzhi Liu ◽  
Ying Li ◽  
Jing Wu ◽  
Sheng Chen
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Optimal Temperature ◽  
Reaction Conditions ◽  
Enzymatic Production ◽  
Physiological Properties ◽  
Potential Applications ◽  
Kinetics Of ◽  
Optimal Reaction ◽  
Gene Age

d-mannose has exhibited excellent physiological properties in the food, pharmaceutical, and feed industries. Therefore, emerging attention has been applied to enzymatic production of d-mannose due to its advantage over chemical synthesis. The gene age of N-acetyl-d-glucosamine 2-epimerase family epimerase/isomerase (AGEase) derived from Pseudomonas geniculata was amplified, and the recombinant P. geniculata AGEase was characterized. The optimal temperature and pH of P. geniculata AGEase were 60 °C and 7.5, respectively. The Km, kcat, and kcat/Km of P. geniculata AGEase for d-mannose were 49.2 ± 8.5 mM, 476.3 ± 4.0 s−1, and 9.7 ± 0.5 s−1·mM−1, respectively. The recombinant P. geniculata AGEase was classified into the YihS enzyme subfamily in the AGE enzyme family by analyzing its substrate specificity and active center of the three-dimensional (3D) structure. Further studies on the kinetics of different substrates showed that the P. geniculata AGEase belongs to the d-mannose isomerase of the YihS enzyme. The P. geniculata AGEase catalyzed the synthesis of d-mannose with d-fructose as a substrate, and the conversion rate was as high as 39.3% with the d-mannose yield of 78.6 g·L−1 under optimal reaction conditions of 200 g·L−1d-fructose and 2.5 U·mL−1P. geniculata AGEase. This novel P. geniculata AGEase has potential applications in the industrial production of d-mannose.

Investigation of the Static Behavior and Failure Mechanisms of a 3D Printed Bio-Based Sandwich with Auxetic Core

2020 ◽  
Vol 12 (05) ◽  
pp. 2050051
Author(s):  
Khawla Essassi ◽  
Jean-Luc Rebiere ◽  
Abderrahim El Mahi ◽  
Mohamed Amine Ben Souf ◽  
Anas Bouguecha ◽  
...  
Keyword(s):  
Failure Mechanisms ◽  
Three Dimensional ◽  
Acoustic Emissions ◽  
Shear Stiffness ◽  
Tensile Tests ◽  
Sandwich Composite ◽  
Static Behavior ◽  
Flax Fibers ◽  
Data Points ◽  
3D Printed

In this research contribution, the static behavior and failure mechanisms are developed for a three-dimensional (3D) printed dogbone, auxetic structure and sandwich composite using acoustic emissions (AEs). The skins, core and whole sandwich are manufactured using the same bio-based material which is polylactic acid reinforced with micro-flax fibers. Tensile tests are conducted on the skins and the core while bending tests are conducted on the sandwich composite. Those tests are carried out on four different auxetic densities in order to investigate their effect on the mechanical and damage properties of the materials. To monitor the invisible damage and damage propagation, a highly sensitive AE testing method is used. It is found that the sandwich with high core density displays advanced mechanical properties in terms of bending stiffness, shear stiffness, facing bending stress and core shear stress. In addition, the AE data points during testing present an amplitude range of 40–85[Formula: see text]dB that characterizes visible and invisible damage up to failure.

scholarly journals Acoustic Cell Patterning in Hydrogel for Three-Dimensional Cell Network Formation

Micromachines ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 3
Author(s):  
Kyo-in Koo ◽  
Andreas Lenshof ◽  
Le Thi Huong ◽  
Thomas Laurell
Keyword(s):  
Network Formation ◽  
Umbilical Vein ◽  
Three Dimensional ◽  
Extrusion Process ◽  
Fibroblast Cells ◽  
Glass Capillary ◽  
Cell Network ◽  
Significant Difference ◽  
The One ◽  
Umbilical Vein Endothelial Cells

In the field of engineered organ and drug development, three-dimensional network-structured tissue has been a long-sought goal. This paper presents a direct hydrogel extrusion process exposed to an ultrasound standing wave that aligns fibroblast cells to form a network structure. The frequency-shifted (2 MHz to 4 MHz) ultrasound actuation of a 400-micrometer square-shaped glass capillary that was continuously perfused by fibroblast cells suspended in sodium alginate generated a hydrogel string, with the fibroblasts aligned in single or quadruple streams. In the transition from the one-cell stream to the four-cell streams, the aligned fibroblast cells were continuously interconnected in the form of a branch and a junction. The ultrasound-exposed fibroblast cells displayed over 95% viability up to day 10 in culture medium without any significant difference from the unexposed fibroblast cells. This acoustofluidic method will be further applied to create a vascularized network by replacing fibroblast cells with human umbilical vein endothelial cells.

scholarly journals Midface Reconstruction: Planning and Outcome

2020 ◽  
Vol 53 (03) ◽  
pp. 324-334
Author(s):  
Gautam Biswas
Keyword(s):  
Digital Imaging ◽  
3D Structure ◽  
Three Dimensional ◽  
The Past ◽  
Complex Anatomy ◽  
Osseointegrated Implants ◽  
Low Profile ◽  
3D Printed ◽  
Midface Reconstruction ◽  
Reconstruction Planning

Abstract Reconstruction of the complex anatomy and aesthetics of the midface is often a challenge. A careful understanding of this three-dimensional (3D) structure is necessary. Anticipating the extent of excision and its planning following oncological resections is critical.In the past over two decades, with the advances in microsurgical procedures, contributions toward the reconstruction of this area have generated interest. Planning using digital imaging, 3D printed models, osseointegrated implants, and low-profile plates, has favorably impacted the outcome. However, there are still controversies in the management: to use single composite tissues versus multiple tissues; implants versus autografts; vascularized versus nonvascularized bone; prosthesis versus reconstruction.This article explores the present available options in maxillary reconstruction and outlines the approach in the management garnered from past publications and experiences.

scholarly journals Recurrent contracted sockets treated with personalized, three-dimensionally printed conformers and buccal grafts

2021 ◽  
pp. 112067212110000
Author(s):  
Annabel LW Groot ◽  
Jelmer S Remmers ◽  
Roel JHM Kloos ◽  
Peerooz Saeed ◽  
Dyonne T Hartong
Keyword(s):  
Three Dimensional ◽  
Case Series ◽  
Secondary Outcome ◽  
Retrospective Case ◽  
Upper Eyelid ◽  
Ocular Prosthesis ◽  
Buccal Mucosal Graft ◽  
Custom Made ◽  
3D Printed

Purpose: Recurrent contracted sockets are complex situations where previous surgeries have failed, disabling the wear of an ocular prosthesis. A combined method of surgery and long-term fixation using custom-made, three-dimensional (3D) printed conformers is evaluated. Methods: Retrospective case series of nine patients with recurrent excessive socket contraction and inability to wear a prosthesis, caused by chemical burns ( n = 3), fireworks ( n = 3), trauma ( n = 2) and enucleation and radiotherapy at childhood due to optic nerve glioma ( n = 1) with three average previous socket surgeries (range 2–6). Treatment consisted of a buccal mucosal graft and personalized 3D-printed conformer designed to be fixated to the periosteum and tarsal plates for minimal 2 months. Primary outcome was the retention of an ocular prosthesis. Secondary outcome was the need for additional surgeries. Results: Outcomes were measured at final follow-up between 7 and 36 months postoperatively (mean 20 months). Eight cases were able to wear an ocular prosthesis after 2 months. Three cases initially treated for only the upper or only the lower fornix needed subsequent surgery for the opposite fornix for functional reasons. Two cases had later surgery for cosmetic improvement of upper eyelid position. Despite pre-existing lid abnormalities (scar, entropion, lash deficiency), cosmetic outcome was judged highly acceptable in six cases because of symmetric contour and volume, and reasonably acceptable in the remaining two. Conclusions: Buccal mucosal transplant fixated with a personalized 3D-designed conformer enables retention of a well-fitted ocular prosthesis in previously failed socket surgeries. Initial treatment of both upper and lower fornices is recommended to avoid subsequent surgeries for functional reasons.

Sign in / Sign up

Export Citation Format

Share Document